EHP1 implementation prerequisite

Hello,
I have a question regarding EHP1 SPS03 implementation.
I want to implement it on a J2EE / Portal Stack 16, is this possible or do we need to patch to the latest SPS?
What is the precondition?
Thanks a lot for your responses.
Regards,
Andreas

Hi,
Do you mean you have Portal 7.0 SP16 and you want to Apply Ehp1 i.e., upgrade to portal 7.0.1 ??
You should be able to apply it from SP15 onwards I suppose...
Prerequisite is SP15 or above so you may go ahead!
Regards,
Anagha

Similar Messages

ESW: Question on the usage of "READ PURCHASE ORDER" service operation

Hi everyone,
I plan to consume consume "READ PURCHASE ORDER" in my composite application. When I navigated to SAP Documentation on ES Workplace, I found out the following paragraph in the "Notes on SAP Implementation" section.
Notes on SAP Implementation
Prerequisites
You must implement the application component Purchase Orders (MM-PUR-PO) so that you can use the operation.
I am not clear about the prerequisite. How do I implement an application component?
Here are the details to this service operation from ES Workplace:
Software Component Version:      ESA ECC-SE 604
First released with:      ESA ECC-SE 600
Release State:      released
Technical Name:      PurchaseOrderByIDQueryResponse_In
Namespace:      http://sap.com/xi/APPL/SE/Global
Application Area:      MM-PUR
Webservice Definition:      ECC_PURCHASEORDER002QR
Direction:      inbound
Mode:      synchronous
Idempotency:      not applicable
Change/Update Behavior:      not applicable
Could anyone please enlighten me on this issue?
Thanks,
Joon Meng

Hi Michael,
thanks for the quick reply.
Now I understand the situation better with your explanation. But how can I check whether the application component is configured, which transaction? And how I can configure the application component?
Are there any documentations or tutorials concerning this topic? I simply do not have the whole picture / process flow of the matter.
Thanks in advance.
Regards,
Joon Meng

Need clarification on SAP notes

Hi,
I need information on SAP notes relation.
Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified in correction instruction 1st and then implement main note or directly we can apply Main note X.
If we apply main note obvisoulsy all the notes within correction instructions will be implemented
Regards,
Ravi

Hi Ravi
Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
=>Before implementing those correction verify whether that X note applicable to your system release. Also verify is any manual code correction instructed in that note.
If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified in correction instruction 1st and then implement main note or directly we can apply Main note X.
=> Before implementing those correction verify whether that X note applicable to your system release or its already implemented in your system. All these Prerequisites need to implement before final correction.
If we apply main note obvisoulsy all the notes within correction instructions will be implemented.
=> No we need to implement Prerequisites notes before main notes.
Thank

Industry Solution - Apparel and footware Solution

Hi Experts
I am assigned to IS AFS ( Apparel & Footware) BI - BO project...i am not much aware of AFS implementation.
Can any one help me the implementation prerequisities of AFS...wat are the key areas to be concentrated and data loading strategy,,...
Thanks in Advance...
Shri...

Hi
Please refer below SAP help. I don't think there is special data load process expect different extractors.
Thanks
Raghu

Multi level categorization component integrated into TASK

Hello Experts,
We are working on a CRM 7.0 EHP1 implementation project, one of the business requirements is multi level categorization on task object.
The How-To Guide Add multilevel categorization component of the Interaction Record to other objects by Micha Van Nijen was found and that was what we aimed. Great how to guide.
I successfully implemented the ICCMP_BT_CAT component into the TASK component according to this wiki.
The configuration/customizing are done. I am able to use multi level categorization on interaction record. (configure Catalog, code group and codes. Subject profile also created and assigned to categorization schema.) But on the task web ui there is no categorization fields. I guess it uses the same catalog A1 as interaction record.
The task multi level categorization customizing is created similar to interaction record.
Any help greatly appreciated.
Regards,
Robert Cserny

As far as I know the category modeler application (multi level categorization) is available for the following applications:
    Service orders
    Service order templates
    Confirmations
    Complaints
    In-house repair orders
    Service requests (incidents)
    Problems
    Requests for change
    Knowledge articles
    Case management
    Interaction records
    E-Mail Response Management System (ERMS)
Is there anybody who can confirm that it could be available on SALES task transaction as well? If yes could you share the basic steps of customizing?

Need clarification on SAP NetWeaver Certification

I am having six months experience in SAP. Now I have planned to take NetWeaver certification. I know the following ways.
1) Attend an Instructor-led ABAP Certification Academy(25 working days, 8hrs/day, 5 days/week, approx Rs.3 Lakh) at an SAP Education Center or Partner such as Siemens, Genovate etc.
2) Attend an e-learning course at an SAP Online Contact Center(flexible times, no instructor, approx Rs.1,25,000)
3) Get your company to endorse your ABAP Experience and sponsor your certification(approx Rs.28000, exam only, no materials, no training!)
4) Register for SAP TechEd and hope they offer a complimentary certification like they do every year(3 days, lots of fun, should be around Rs.15000, no training, a few materials)
But I heard that there is one more way of doing that, without affording such a big amount and having less experience. Is that true? Can anyone help me out?
regards
prabhu

Hi Ravi
Suppose a note X says corrections are delivered in the attached correction instruction, then its enough if we implement that specific note X.
=>Before implementing those correction verify whether that X note applicable to your system release. Also verify is any manual code correction instructed in that note.
If we go to correction instruction then it may have several other notes, do we need to implement all those notes specified in correction instruction 1st and then implement main note or directly we can apply Main note X.
=> Before implementing those correction verify whether that X note applicable to your system release or its already implemented in your system. All these Prerequisites need to implement before final correction.
If we apply main note obvisoulsy all the notes within correction instructions will be implemented.
=> No we need to implement Prerequisites notes before main notes.
Thank

Prerequisites for SAP NW BPM implementation

Hi All,
Can you please let me know the prerequisites for SAP NW BPM implementation?
Also,please let me know the phases in a SAP NW BPM implementation like requirement gathering and subsequent phases.
Thanks in advance

Hi,
You can start with this document Step by Step Guide to SAP NetWeaver Business Process Management - Webinar Replay, and this simple example http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307336b8-098c-2d10-be9c-d41ae345f0ff?QuickLink=index&…
Regards.

Prerequisites for Implementing ESS 600 SP14

Hi
What are the Prerequisites (Portal Support Package and BackEnd ) for Implementing ESS 600 SP14 ?
we are on EP7 SP14 and ECC6
i checked Note 908569 - Information about ERP 2005 JAVA Support Packages
but it desscribes only till ESS 600 SP13.
Regards
Rajendra

Hi
Also check the following Notes
Note 761266 - Self Services Patches
Note 1004528 - SAP Self Services: Business packages and components
Note 1007341 - SAP ERP 2004/2005 - supported ESS/MSS system landscapes
Vijay

What r the prerequisites for implementation scm-apo in ECC 6.

HI,
what r the prerequisites for implementation scm-apo in ECC 6.
Thanks,
Ashutosh
9891595497

Hi Ashutosh,
you can find all informations about the implementation (installation /upgrade) of SCM on the SAP help portal.
In http://help.sap.com choose in "SAP Business Suite" the "SAP Supply Chain Management".
In Knowledge Center for SAP Supply Chain Management (SAP SCM) choose the required SCM release e.g. SAP SCM 5.0 and open it.
Here under "Installation, Upgrade, Master and Operation Guides" you can find all necessary information about the installation, technical upgrade and operation of SAP SCM.
The Master Guide for SAP SCM provides important information about the installation of the relevant scenarios and the components. It links to all other documents that are required for the implementation of a specific scenario, for example to the Upgrade Master Guide, which is the important overview guide for upgrading scenarios .
I hope I could help you with these informations.
Regards,
Tibor

Prerequisites For implementing MI using NWDS 7.0

Hi all,
Currently my client has got NWDS 7.0 version and is willing to implement the method of accessing the BI reports directly using Blacberry mobile.
well, can anyone let me know the Prerequisites and the compatable MI version etc ., with NWDS 7.0
Thanks In Advance,
Vipin
Edited by: Vipin on Mar 21, 2009 2:27 PM

Vipin,
I'm not totally sure if you're posting in the right category..
perhaps try here: [NetWeaver : Mobile|SAP for Mobile;
And they have a compilation of MI related weblogs posted there as well: [MI Weblogs|Weblogs Related to Mobile;
godspeed.
Regards,
Jan

Which BP we hould implement on EP SR3 EHP1

Hello we have an two year old development EP sistem with(in JSPM):
IS-HER-CSS 600.13.1
SAP_ASR 600.13.0
SAP_ESS 600.13.5
SAP_MSS 600.13.0
SAPPCGUI_GP 600.13.0
I do not know where to download them and right version for productive system on EP SR3 EHP1 and how to implement them (in JSPM or SDM)

Hello
Is this (I get by searching on swdc vwith keyword""IS-HER-CSS") "ISHERCSS13P_1-20001218.SCA or ISHERCSS13_0-20001218.SCA¸you are referring to. Are they implementable via SDM or JSPM(or does no metther).
SAP_ASR I do not find in swdc
For BP ERP05 I found on swdc " BP ERP05 COMMON PARTS 1.0 Support Package 00 "...."BP ERP05 COMMON PARTS 1.0 Support Package 17 " Which one to use as on first development EP 7.00 all versions we are using sp13 I asssume to do it this time as well. Are they implementable via SDM or JSPM(or does no metther).
BP ERP05 ESS 1.0 Support Package 13 as well implementable via SDM or JSPM(or does no metther)...(same for MSS)
SP13 for SAP ESS 600 I could download (implementable via SDM or JSPM(or does no metther) (same for SAP MSS 600)
SAP PCUI_GP 600 Support Package 13 (implementable via SDM or JSPM(or does no metther)

Prerequisite EHP1

Dear All,
I have to do from SAP Netwear7.0 to EHP1.
existing support pack:
SAP_ABA     700     0016     SAPKA70016     Cross-Application Component
SAP_BASIS     700     0016     SAPKB70016     SAP Basis Component
PI_BASIS     2005_1_700     0016     SAPKIPYJ7G                          PI_BASIS 2005_1_700
SAP_BW     700     0018     SAPKW70018     SAP NetWeaver BI 7.0
BI_CONT     703     0011     SAPKIBIIQ1     Business Intelligence Content
SEM-BW     600     0013     SAPKGS6013     SEM-BW 600 : Add-On Installation
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
here need to be update any support pack?.
In patch PI_BASIS should update to 2008 has needversion has needed?
Kindly guide me dear experts.
Regards,
kiruba.

Hi ,
Please check below threads to answer your query.
SAP Enhancement Package 1 for SAP NetWeaver 7.0;jsessionid=(J2EE3417200)ID1111045650DB11920203754943652247End
https://websmp101.sap-ag.de/erp-ehp
As said by sunny ,for 32 bit you can apply ehp1 via SAINT however for 64 bit platform only option is via ehpi.Which is similar to upgrade of a SAP system.
Thanks..
Mohit

Prerequisites for implementing BPS

Hi BPS Gurus,
If we want to implemwnt BPS for FI could you send me the prerequisties.We are now in ecc5.0(BW3.5).
Thanks in advance
Thanks & Regards,
Vijay

Hi Vijay,
What kind of prerequisties do u refer to? May Be please be more specific what you trying to do by using BPS.

0HR_PA_PA_1 (Headcount) not found in BCT of our BI 7.0 Ehp1 System.

Dear Experts,
We are working on BI 7.0 Ehp1 system. Our system SP levels are as below:
SAP_ABA     701     0006     SAPKA70106     Cross-Application Component
SAP_BASIS     701     0006     SAPKB70106     SAP Basis Component
PI_BASIS     701     0006     SAPK-70106INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0004     SAPKITLRD4     SAP Solution Tools Plug-In
SAP_BW     701     0006     SAPKW70106     SAP Business Warehouse
BI_CONT     705     0002     SAPK-70502INBICONT     BI_CONT 705: Add-On Installation
ST-A/PI     01N_700BCO     0000          -     Servicetools for other App./Netweaver 04
However, I don't find 0HR_PA_PA_1 (Headcount) listed when I searched DataSources in Business Content of our BW System. I have been through a lot of threads on the forum and noticed most of the threads are fairly old. Not quite sure if to believe those versions.
When I checked with one of my friends who is on a lesser SP levels of BCT (BI_CONT     705     0001     SAPK-70501INBICONT     BI_CONT 705: Add-On Installation) as compared to us, he is able to see the same DataSource listed in his BCT which is a BI 7.0 system too.
I want to use this DataSource to load 0PAPA_C02 by sourcing data from BW Development and also pulling some data from 2 other DSOs.
However, my current challenge is to get this DataSource in our BI 7.0 System.
I am not sure what could have gone wrong. Any help is very much appreciated.
Thanks,
Chandu

HI ,
This is a Old Datasource , and it requires some manual customisation , refer the SAP note below
Note 336229 - Use of InfoCube 0PAPA_C02/InfoSource 0HR_PA_PA_1
Symptom
You want to use InfoCube 'Headcount' (0PAPA_C02) and the corresponding InfoSource 'Headcount' (0HR_PA_PA_1).
Even though you transferred the data from the Business Content, the transfer rules are not complete for the InfoSource, or DataSource 0HR_PA_PA_1 does not exist or is not complete.
Other terms
Headcount, BW, OLTP, HR, extraction, non-cumulatives, SBIW, Business Content, activation, transfer
Reason and Prerequisites
The use of this content requires some manual advance activities.
Solution
Extraction of master data in the BW System as transaction data InfoSource:
InfoSource 0HR_PA_PA_1 is supplied by DataSource 0HR_PA_PA_1, which only exists in a BW System.The corresponding extractor reads the master data tables for InfoObjects Employee (0EMPLOYEE) and Person (0PERSON) and provides changes to these time-dependent attributes as non-cumulative value change.
The DataSource supports the 'Full Update' mode only. Extraction in delta mode would not reduce the extraction time since the determination of the delta needs extreme effort with this DataSource. For this reason, the delta mode was not implemented.
Note that the system only provides changes of person attributes if also employee master data exists for this person.
Do the following steps in your BW System:
1. Transfer the Business Content in the Administrator Workbench:
              Choose InfoCube 'Headcount' (0PAPA_C02), collect all objects with grouping 'Data flow before and after' and copy them from the Business Content afterwards.
              Check whether key figures 0ANSAL_NC / 0ANSAL_VC, 0HDFTE_NC / 0HDFTE_VC and 0HDCNT_NC / 0HDCNT_VC were activated in the process.In addition, InfoCube 0PAPA_C02 itself, InfoSource 0HR_PA_PA_1 and the respective update rules should be active.
2. Customizing of DataSource 0HR_PA_PA_1:
The following step is relevant to BW 2.1C only:
Because the extractor for this DataSource requires the activation of certain InfoObjects (and thus the existence of these data elements), the extractor can only be delivered in modules which must be activated manually.For this purpose, you must make modifications at two locations in function group RS_BCT_PA_EXTRACTION (removal of the respective comment characters for the activation of the Includes):
1. LRS_BCT_PA_EXTRACTIONTOP:old: * INCLUDE rs_bct_pa_extraction_top.new: INCLUDE rs_bct_pa_extraction_top.
2. RS_BCT_PA_GET_DATA:
old: * INCLUDE rs_bct_pa_get_data.new: INCLUDE rs_bct_pa_get_data.
In BW 3.0A, this is carried out automatically when activating the DataSource. As of BW 3.0A Patch 7 and BW 3.0B, this step is obsolete since programs are generated instead.
BW IMG (Transaction SBIW): Transfer of DataSource 0HR_PA_PA_1 (Application component DM)
Postprocess DataSource 0HR_PA_PA_1:
Add the following fields to the extract structure (Customer-Append ZARSBCTPA_0HR_PA_PA_1 to extract structure RSBCTPA_0HR_PA_PA_1):
Component Component type
EMPLOYEE /BI0/OIEMPLOYEE
CURRENCY /BI0/OICURRENCY
EMPLGROUP /BI0/OIEMPLGROUP
EMPLSGROUP /BI0/OIEMPLSGROUP
EMPLSTATUS /BI0/OIEMPLSTATUS
HRPOSITION /BI0/OIHRPOSITION
JOB /BI0/OIJOB
ORGUNIT /BI0/OIORGUNIT
PAYRL_AREA /BI0/OIPAYRL_AREA
PAYSCALEAR /BI0/OIPAYSCALEAR
ESGFORCAP /BI0/OIESGFORCAP
PAYSCALEGR /BI0/OIPAYSCALEGR
PAYSCALELV /BI0/OIPAYSCALELV
PAYSCALETY /BI0/OIPAYSCALETY
PERS_AREA /BI0/OIPERS_AREA
PERS_SAREA /BI0/OIPERS_SAREA
MAST_CCTR /BI0/OIMAST_CCTR
CO_MST_AR /BI0/OICO_MST_AR
COMP_CODE /BI0/OICOMP_CODE
COUNTRY_ID /BI0/OICOUNTRY_ID
ENTRYDATE /BI0/OIENTRYDATE
SALARYAR /BI0/OISALARYAR
SALARYGR /BI0/OISALARYGR
SALARYLV /BI0/OISALARYLV
SALARYTY /BI0/OISALARYTY
PERSON /BI0/OIPERSON
DATEBIRTH /BI0/OIDATEBIRTH
GENDER /BI0/OIGENDER
NATION /BI0/OINATION
PERSLANGU /BI0/OIPERSLANGU
COUNTRY /BI0/OICOUNTRY
COUNTY_CDE /BI0/OICOUNTY_CDE
POSTAL_CD /BI0/OIPOSTAL_CD
REGION /BI0/OIREGION
HDCNT /BI0/OIHDCNT_VC
ANSALARY /BI0/OIANSAL_VC
PAYPCT /BI0/OIHDFTE_VC
Enter the names of the fields exactly as listed in the note. Ignore messages of type:
'Field EMPLOYEE is not within the customer namespace.'
If you extended 0EMPLOYEE or 0PERSON by user-specific attributes, you can also include them in the extract structure or in the InfoSource and the InfoCube.Until further notice, SAP recommends that you only include new characteristics and no key figures.
Check marks have to be removed for all new fields in the 'Hide field' column (Transaction RSA6 for application component BW-DM). You can only use fields EMPLOYEE and CALDAY as selection fields.
3. Replicate DataSource 0HR_PA_PA_1 in the Administrator Workbench / Source systems (your BW System as a source) - application component personnel admistration (PA-PA), and assign the DataSource to InfoSource 0HR_PA_PA_1.
Special features of InfoCube 'Headcount' (0PAPA_C02):
Compounding of InfoObjects and source systems is not supported.
First, execute the attribute change run in order to take into account master data which have already been loaded into the BW System but not yet activated.
For technical reasons (Non-cumulative method), the age or seniority fields cannot be supplied directly from the InfoSource.They must be modelled as virtual key figures and characteristics. The corresponding logic for these fields is not delivered until BW 3.0A.
All attributes of 0PERSON and 0EMPLOYEE must be time-dependent.
Maintenance of the validity slice (Transaction RSDV) for InfoCube 0PAPA_C02 after the first load of data:to-mode 'Fixed value' and '31.12.9998' as a date
Regards,
Sathya

Need help in implementing a note

Gurus ,
i need your help in implemnting the SAP NOTE
"873422 - Error when sending an e-mail"
I am not suer how to proceed to implement the correction speified in that note .
it would be of great help if any body can explain me in brief to implement atleast one correction in that note

Hi Susin,
The first thing for Note 873422,
"You have created e-mails from Audit Management. The system automatically attaches a link to the display of the audit object being sent. When you send an e-mail via SAPconnect, the following error occurs: XS 829 Internal error: SO_OBJECT_MIME_GET Exception: 2."
Are you getting this symptom in your system? and you want to apply the correction??
After applying the correction, if the prerequisite mentioned in note 530932 is not met during sending mail.. then
simply the link will not be attached. but mail will be sent.
you have to apply the correction of the note using SNOTE or manually apply note by download/upload.
For how to apply a note using SNOTE you can follow the help guide
http://help.sap.com/saphelp_nw70/helpdata/EN/b8/3cf839fd35384de10000000a11402f/frameset.htm
Regards,
Debasis.

EHP1 implementation prerequisite

Similar Messages

Maybe you are looking for