EHP1 on SolutionManager

Hi,
   In my  solman server patch level is sp14,now i want to apply ehp1 on solution manager,how to install ehp1 on solution manager,what are the prerequistes for to install EHP1,iam new to this concept,guide me for the same.
Thanku

Hi
Support pack stack17 comes with patch level SAPKB70016 is your system patched till  SAPKB70016 ?
Support pack stack18 and Support pack stack18 is EHP1 you should now go with applying that
Regards
Uday

Similar Messages

  • Download problem EHP1 for SolutionManager

    Hello everybody,
    I have problem to download the EHP1 for Solman ! The SAP Download Manager can't download all the Netweaver Upgrade Packages f.e. PI_BASIS 701 Upgrade. , SAP_BASIS 701 Upgrade the status message says  "The request failed 304" .
    And the Java Update Packages don't apear in the Download Basket ...
    Kind regards
    Daniel

    >
    Ruediger Stoecker wrote:
    > SAP is already aware of Error 403 while downloading SAP_BASIS 701, SAP_ABA 701.
    > A general solution is currently beeing prepared
    Dear community,
    I just spoke to Product Management for SAP Solution Manager.
    The download issue is planned to be resolved by Monday.
    Information How to download are planned to be published (on Monday) on http://www.service.sap.com/solutionmanager
    Best regards,
    Ruediger

  • Error on Installation of Ehp1 on SolutionManager

    Hi,
    We are Installing Ehp1 solution manager,Installation was stopped at the phase of : Prepare to install minimal configuration.In below its showing message Java Process dispatcher of instance LMV/DVEBMGS00(ABAP:ACTIVE,Java(dispatcher:UNKNOWN,server0:UNKNOWN)did not reach.
    Here iam sending all logs.
    This is the sapinst_dev.log :
              TRACE      2009-09-14 18:38:48.711
    NWInstState(NWCentralInstanceInstall(LMV/DVEBMGS00/LMVolman), 602, 30, undefined)
    TRACE      2009-09-14 18:38:48.711
    NWInstState() done
    TRACE      2009-09-14 18:38:48.712
    NWDIState() done
    TRACE      2009-09-14 18:38:48.712
    NWDialogInstance.getRunningState() done: ABAP: ACTIVE, Java: (dispatcher: UNKNOWN, server0: UNKNOWN)
    TRACE 2009-09-14 18:48:28.793 iaxxgenimp.cpp:1255
    CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI.
    This is import_monitor.java.log :
    Import Monitor jobs: running 2, waiting 2, completed 26, failed 0, total 30.
    Import Monitor jobs: running 3, waiting 1, completed 26, failed 0, total 30.
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 2, waiting 1, completed 27, failed 0, total 30.
    Loading of 'SAPAPPL0' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 28, failed 0, total 30.
    Loading of 'SAPAPPL2' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 29, failed 0, total 30.
    Import Monitor jobs: running 1, waiting 0, completed 29, failed 0, total 30.
    Loading of 'SAPVIEW' import package: OK
    Import Monitor jobs: running 0, waiting 0, completed 30, failed 0, total 30.
    This is work directory(dev_w log) :
    Mon Sep 14 11:48:14 2009
    A  GENER request remote generation: CL_SHM_SERVICE================CP.
    A  GENER request remote generation: CL_ICF_SHM_AREA===============CP.
    A  GENER request remote generation: CX_SHM_ERROR==================CP.
    A
    A Mon Sep 14 11:48:16 2009
    A  GENER request remote generation: CL_ABAP_CHAR_UTILITIES========CP.
    A  GENER request remote generation: SAPLSRFC.
    A
    A Mon Sep 14 12:18:21 2009
    A  **GENER Trace switched off ***
    S
    S Mon Sep 14 12:18:22 2009
    S  found spool memory service RSPO-ACTIONS at 0x2b38d490b3e8

    Hi,
        Thanku here iam sending the logs.
    1)std_server0.out  log :
    <verbosegc>
    JVMJ9VM007E Command-line option unrecognised: -Xjvm:j9vm23
    </verbosegc>
    stdout/stderr redirect
    node name   : server0
    pid         : 6082
    system name : LMV
    system nr.  : 00
    started at  : Tue Sep 15 14:17:33 2009
    [Thr 47901370317712] Tue Sep 15 14:17:34 2009
    [Thr 47901370317712] MtxInit: 10001 0 0
    <?xml version="1.0" ?>
    <verbosegc>
    JVMJ9VM007E Command-line option unrecognised: -Xjvm:j9vm23
    </verbosegc>
    2) std_bootstrap.out log :
    system nr.  : 00
    started at  : Tue Sep 15 14:17:33 2009
    [Thr 47901370317712] Tue Sep 15 14:17:34 2009
    [Thr 47901370317712] MtxInit: 10001 0 0
    <?xml version="1.0" ?>
    <verbosegc>
    JVMJ9VM007E Command-line option unrecognised: -Xjvm:j9vm23
    </verbosegc>
    LMVolman:/usr/sap/LMV/DVEBMGS00/work # tail -1000 std_bootstrap.out
    stdout/stderr redirect
    node name   : bootstrap
    pid         : 6082
    system name : LMV
    system nr.  : 00
    started at  : Tue Sep 15 14:16:54 2009
    3) std_disptacher.out  log :
    <verbosegc>
    JVMJ9VM007E Command-line option unrecognised: -Xjvm:j9vm23
    </verbosegc>
    stdout/stderr redirect
    node name   : dispatcher
    pid         : 6082
    system name : LMV
    system nr.  : 00
    started at  : Tue Sep 15 14:17:33 2009
    [Thr 47668313086864] Tue Sep 15 14:17:34 2009
    [Thr 47668313086864] MtxInit: 10000 0 0
    <?xml version="1.0" ?>
    <verbosegc>
    JVMJ9VM007E Command-line option unrecognised: -Xjvm:j9vm23
    </verbosegc>
    Thanku

  • PI 7.1 EHP1 SR1 and Solutionmanager(7.0) EHP1 is compatible ?

    Hi Folks ,
    In our landscape we have Solution manager(7.0) EHP1 , I would like to propose PI 7.1 EHP1 SR1. But as per the discussion with installation team ,
    We have Solution manager EHP1 which is not compatible with PI 7.1 EHP1 SR1 ? is that true ?
    1. What problem will it cause ?
    2. Is there any issue will arise in SLD , like separate SLD etc.,?
    Please provide your valuable comments .
    All your inputs are highly appreciated .
    Thanks.,
    Shiva

    Hi Shiva,
    I doubt there will be any problem.
    what scenario are you trying to implement in solman?
    Do you have central SLD and local SLD for solman or are you using solman SLD as central SLD ?
    I dont think so there should be any problem.
    Regards,
    Shyam.

  • PI 7.1  EHP1 SR1 and Solutionmanager EHP1 is compatible ?

    Hi Folks ,
    In our landscape we have Solution manager EHP1  , I would like to propose PI 7.1 . But as per the discussion with installation team ,
    We have Solution manager EHP1 which is not compatible with PI 7.1 EHP1 SR1  ? is that true ?
       1. What problem will it cause  ?
       2. Is there any issue will arise in SLD ?
    Please provide your valuable comments .
    All your inputs are highly appreciated .
    Thanks.,
    Shiva
    Edited by: shiva s on Mar 5, 2010 6:55 AM

    I don't think it's true what you heard.
    Solution Manager does support downstream (lower version) applications and Solution Manager with Ehp1 does supports both PI 7.0 or PI 7.1.
    If you are running with PI 7.1, you have Ehp1 readly available for you to upgrade.
    SLD does supports downstream appllications.
    So go ahead with your plans....it will be all perfect.
    -sekhar

  • Solution Manager Upgrade to EHP1 7.01

    Hi
    Need some help. Could you please share  upgrade doc/exp with me, we are planning for upgrade solution manager from sp17 to sp19.
    Stack level 18 or 19 is the part of  EHP1 of Solution Manager version 7.01.
    What is the process to upgrade the support pack to sp level 19? i have no exp to upgrade to EHP1 level..Any difference ?
    Thanks in advance
    Amar

    Hi Amarjit,
    Solution manager upgrade to EHP1 is same like other stack upgrade. You can do it using SAINT/JSPM. But only thing you need is good preparation.
    Check upgrade guide on http://service.sap.com/solutionmanager.
    Also, check SAP  Note 1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1 and SAP Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade
    Thanks
    Sunny

  • SMD, E2E, Ehp1 ???

    I have a Solman 7.0 SPS 16 that was upgraded from a 3.2 system.  I have also added a Java Add-In to this system.  My original goal was to install SMD.  But when you go to \service.sap.com\diagnostics, it points you to End to End diagnostics.  So I figured SAP just renamed the function but when installing Wiley it wants you to use SMD.  They only install guide I can find for SMD is for a 4.0 system.  Is there a 7.0 install guide for SMD?  Is SMD the same as E2E and what is Ehp1?  Thank you in advance for the enlightenment.

    Renamed version of Solman 4.0 is the Solman 7.0
    So, Installation guide for SMD on solman4.0 is same as on 7.0
    You will get those guides as per you NW version and SP stack level.
    SMD is just one component of E2E. To configure E2E between the satellite systems and the Solman system, SMD is one of the components among SMD agent, willy Introscope agent etc...
    EhP1 is the enhancement pack 1 stack for SAP systems. Solman EhP1 is the SP stack 18. Means, to upgrade the solman system more than the SP 17, you need to apply EhP1.
    You have to read a lot...continue with that diagnostic link and service.sap.com/solutionmanager and the SAP Notes

  • SAP EhP1 SPS6 for NetWeaver 7.0 - tp status 230

    While installing SAP EhP1 SPS6 for NetWeaver 7.0 in PBW
    (BI production system) the process fails at phase
    MAIN_NEWBAS/TABIM_UPG - with tp status 230 and unresolved requests in
    buffer.
    Anyone has a clue ?
    Best regards,
    Roger
    PHASES.LOG
    1 ETQ201 Entering upgrade-phase "TABIM_UPG" ("20110716054322")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '61', GwService = 'sapgw61'
    4 ETQ399 Environment variables:
    4 ETQ399 dbs_db4_schema=SAPR3
    4 ETQ399 auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'MAIN_NEWBAS/TABIM_UPG'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'TABIMUPG.BUF'
    2 ETQ399 Arg[1] = 'TABIMUPG.TPP'
    2 ETQ399 Arg[2] = 'TABIMUPG.TP0'
    2 ETQ399 Arg[3] = 'TABIMUPG.ELG'
    2 ETQ399 Arg[4] = 'XPRASUPG.BUF'
    2WETQ399 tp terminated with status 230
    4 ETQ380 computing toolpath for request "TP_ACT_ON_NEW_BUFFER"
    4 ETQ381 request "TP_ACT_ON_NEW_BUFFER" means "act on the tp buffer,
    new format"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_SYS"
    4 ETQ383 translates to path "/usr/sap/PBW/SYS/exe/run"
    2 ETQ399XAnalyze summary error logfile TABIMUPG.ELG and remove all error2 ETQ399Xconditions as described in the upgrade manual
    1 ETQ207 Executing post-phase DB specific actions.
    4 ETQ010 Date & Time: 20110716054327
    SAPehpi.log
    CURRENTPHASE MAIN_NEWBAS/TABIM_UPG
    ...started at 20110716054322
    ...begin processing at 20110716054322
    INFO: Nothing has been done in TABIM_UPG.
    ..times self: 0.130000/0.060000 usr/sys, children 1.110000/0.000000
    usr/sys.
    ..finished at 20110716054327 with status UNRESOLVED REQUESTS IN BUFFER.
    Error message set: 'Unresolved requests in buffer PBW
    Check logfiles 'TABIMUPG.ELG'
    and '/BWIASP1/usr/sap/PBW/put/EHPI/abap/log/SAPehpi.ECO''
    ...begin dialogue at 20110716054328

    Added *allobj to PBWOFR user profile and repeated the phase with success.

  • SAP NW CE 7.1 EHP1 NWDS Preview Version Installation issue

    I am running into follow error message when trying to install NWDS of SAP NW CE 7.1 EHP1 Preview Version
    Error Message:
    Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors
    Error Details:
    Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors.
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "C:SAPCE-EPH1NWDSIDENWDS_platformeclipse eaturescom.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:DOCUME1PEdalaLocal SettingsTempcom.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
    Before error message is displayed, I get Windows Pop message with Windows Installer message as below:
    Windows ® Installer. V 3.01.4000.1823
    msiexec /Option 
    Install Options
              i - Status messages
              w - Nonfatal warnings
              e - All error messages
              a - Start up of actions
              r - Action-specific records
              u - User requests
              c - Initial UI parameters
              m - Out-of-memory or fatal exit information
              o - Out-of-disk-space messages
              p - Terminal properties
              v - Verbose output
              x - Extra debugging information
              + - Append to existing log file
              ! - Flush each line to the log
    - Log all information, except for v and x options
         /log
              Repairs a product
              p - only if file is missing
              o - if file is missing or an older version is installed (default)
              e - if file is missing or an equal or older version is installed
              d - if file is missing or a different version is installed
              c - if file is missing or checksum does not match the calculated value
              a - forces all files to be reinstalled
              u - all required user-specific registry entries (default)
              m - all required computer-specific registry entries (default)
              s - all existing shortcuts (default)
              v - runs from source and recaches local package
    Setting Public Properties
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.
    Please advice?
    Best regards,
    Sridhar

    Hi,
    Although I have not encountered this error in my installation copy - you can try the following:
    Take the zip file for NWDS to another machine and install it. If you do get the same error - then the zip file was damanged in the transfer - if not then probably it is an issue with the Microsoft Installer files that you are using. If you are using a legal version of Windows then upgrade to the latest updates and then try again. You can try the same steps after shutting down and restarting your PC.
    Most probably the zip file is damaged since the MSI has run successfully.for the CE WAS.
    p256960.

  • RFC connection error between Netweaver 7 EHP1 and Ides ECC6

    Hi Friends,
    I try to create  source system  in BI from Netwever EHP1 to IDES ECC6 EHP3.
    During the creation I get a connection error, says. check connction parameter.
    I checked the parameter, everything is fine. Server, System and number.
    When I went to the SM59 and created a connction.
    I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
    The Host name is resolved to 192.168.2.111 wich is OK.
    But when I run the connection test it shows me  "ERROR: partner '80.156.86.78:sapgw06' not reached"
    I have no idea where this IP '80.156.86.78" is comming from.
    No Problem with the opposite way, from Ides to NW and login to the System is OK too.
    Can anybody help me with this problem.
    RG. Jimbob

    Hi,
    What is the next screen that comes up when you click on remote logon.
    If no screen comes up then:
    Check the user type of the user id used for this RFC.
    It should be either dialog or service user for able to remote login.
    If it open a new window and asks for password, then its excatly password issue.
    Also make sure that the password is in numeric and correct.
    Also make sure that the current user check box is unchecked.
    Even if it dosent work, delete the connection and create again.
    Please award points if helps.
    Thanks
    Santhosh

  • Installation SAP Sneak Preview 7.0 EhP1 fails.

    Hi all,
    I want to install SAP Sneak Preview 7.0 EhP1, with the new WD4A features. I already had one installation that failed. Therefore, the official uninstall was not yet present in c:\sap\nsp\uninstall. So I had to delete all files and folders manually. I also used the registry cleaning tool, checked the host file and services file. But still, when trying to (re)install it, on the first check of the installation wizard, I keeps giving me the error, that there is already an NSP system running /installed, which in fact is not (no longer) true. What else should I do to overcome this error?
    Kind regards,
    Micky.
    BTW. I already posted this question on other forum, but still no replies. Hope I have better luck here.

    This is not an appropriate forum for the posting of questions about the Sneak Preview installation.  There is a dedicated forum for such questions.

  • CRM 7.0 EHP1 and FINBASIS

    Gurus,
    I hope this question is posted in the correct forum...if not, let me know where it ought to go.
    We are currently running CRM7.0 with NW7.01 dual stack with these components:
    SAP_ABA     701     0007     SAPKA70107
    SAP_BASIS     701     0007     SAPKB70107
    PI_BASIS     701     0007     SAPK-70107INPIBASIS
    ST-PI     2008_1_700     0004     SAPKITLRD4
    SAP_BS_FND     701     0008     SAPK-70108INSAPBSFND
    SAP_BW     701     0007     SAPKW70107
    SAP_AP     700     0021     SAPKNA7021
    WEBCUIF     700     0008     SAPK-70008INWEBCUIF
    BBPCRM     700     0008     SAPKU70008
    ST-A/PI     01N_700CRM     0000          -
    Now, we'd like to move to CRM 7.0 EHP1 which includes NW7.02
    When I log in to the maintenance optimizer to pull down the entire list of patches, I'm also prompted to install a completely new component called FINBASIS.  Now I'm familiar with this component from the ECC6.0 side, but never from CRM.
    I'm wondering if I must install this or if optional when I move to CRM 7.0 EHP1.
    Does anyone have any experience with what I am describing?
    --NICK

    I found the master guide and it states this:
    Finbasis for CRM
    Finbasis for CRM is a optional SAP add-on that can be either installed on top of either SAP ERP or SAP CRM. This add-on includes the Financial Supply Chain Management (FSCM) applications SAP Dispute Management and Collections Management, which extend the SAP ERP Financials capabilities.
    These applications add extra functionality to the Shared Service Center business scenario available with the SAP CRM Interaction Center. To use these applications, you may simply deploy this software unit on top of your SAP CRM system, without having to upgrade your SAP ERP system to EHP5.
    So since we already have an ECC system that is moving to EHP5, I don't think we'll add this component to CRM.

  • Error in EHP1 Portal Installation

    Dear All,
    I am facing a weird error while install EHP1 Portal system. When it comes to phase Install Software units, it always fail with the same error. System details are below:
    System: Netweaver Portal EHP1 System (Usage Type: As Java, EP, EP Core and DI)
    OS: Linux Red hat 5.2
    Database: DB2 9.7 FP 3
    JDK: 1.4.2
    Please check below error log:
    sapinst_dev.log:
    ERROR      2011-03-16 14:30:02.174 [iaxxejsbas.cpp:204]
    FJS-00003  uncaught exception: nw.sdm.deploymentErrorWithLog:
    SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check /usr/sap/trans/instlogdir/sapinst_instdir/NW701/AS-JAVA/DB6/CENTRAL/
    /callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)
    TRACE      2011-03-16 14:30:02.790 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 2832
    TRACE      2011-03-16 14:30:02.914 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 2833
    ERROR      2011-03-16 14:30:05.434 [sixxcstepexecute.cpp:950]
    FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was
    executed with status ERROR ( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog:
    SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check /usr/sap/trans/instlogdir/sapinst_instdir/NW701/AS-JAVA/DB6/CENTRAL/
    /callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)).
    callSdmViaSapinst.log:
    Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [a2zportalprd] with user name: [Administrator]
                                    Check your login information.
                                    Exception is:
    com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running.  Root exception is co
    m.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
            at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
            at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
            at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
            at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:675)
            at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:257)
            at javax.naming.InitialContext.init(InitialContext.java:233)
            at javax.naming.InitialContext.<init>(InitialContext.java:209)
            at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
            at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51
    System is running and I am able to login with administrator user id. There is only single server node and there is no error related to expiration time. SDM is also running. Secure store is also correct. Still I am facing same problem. I checked on SDN as well and found many reference of the same problem but none of them resolved my problem.
    Please suggest.
    Thanks
    Sunny

    Hi Sunny,
    Check note 1313644 and 609603. Hope it helps.. The 1st link seems to have the same issue.
    Also Refer:
    SDM Problem installing SAP Netweaver EHP2
    ERROR: Cannot connect to Host: [SERVER] with user name: [J2EE_ADMIN]
    Rgds,
    Soujanya

  • Installing Java Stack - Netweaver 7.0 EHP1

    We currently have our ERP system installed (ECC6) and i am planning to install the Java stack on a separate server for portal and ADS.  I was at the Service Marketplace to download the installation files and was wondering what is all needed.  I have a Windows Server with SQL.  I assume that this would be a Central Instance installation and the guide mentions that the following DVD's are to be used:
    -Installation Master DVD
    -Kernel DVD
    -Netweaver Java SP14 DVD
    -RDBMS DVD
    Within service marketplace I see the downloads for:
    BS 7 SR1 Installation Master Windows Server on x64 64bit
    RDBMS MSSQLSRV 2008 incl. SP1 1 - 6
    BS 7 SR1 Kernel 7.01 Windows Server on x64 64bit
    BS 7 SR1 UC-Kernel 7.01 Windows Server on x64 64bit
    there is no download for the Netweaver Java SP14 DVD files.
    If anyone can point me in the right direction I would appreciate it.
    Thanks.

    Hi,
    If you are looking at installing SAP Newtaver Portal 7.0 with EHP1 go to service.sap.com/swdc:
    Installations and Upgrades - Entry by Application Group --> SAP Netweaver --> SAP NETWEAVER --> SAP EHP1 FOR SAP NETWEAVER 7.0 --> Installation and Upgrade --> Windows Server --> Microsoft SQL-Server
    Here, the DVDs that you require for Java are:
    51037093_1 - NW 7.0 EHP1 SR1 Java based SW Comp.s 1 of 4
    51037093_2 - NW 7.0 EHP1 SR1 Java based SW Comp.s 2 of 4
    51037093_3 - NW 7.0 EHP1 SR1 Java based SW Comp.s 3 of 4
    51037093_4 - NW 7.0 EHP1 SR1 Java based SW Comp.s 4 of 4 
    Regards,
    Shitij.

  • How to deploy BI  on EHP1 for SAP NetWeaver Composition Environment 7.1

    Hello Gurus,
    i have installed SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version  at home on vista 32 bits.
    it's running well...
    next i have installed EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version
    and follow this guide :
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1
    the portal is running well....coooool.. ( http//:localhost:50100/irj/portal)
    after i follow this documentation to create some cubes on BI abap trail (client 001).
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
    i create my report with the query designer,
    and i see my bi report with transaction RSRT and ABAP WEB tab ( http://localhost:80000)
    it's running well....whaooouuu !!!!
    Now i'm lost, i would like to deploy my bi report on the portal, but i don't know what i must do.
    ( and when i try with the query designer or rsrt + java web i have a error message )
    - perhaps create an user communication  between portal/bi abap  where ?
    - how to deploy bi java on portal (EHP1 for SAP NetWeaver Composition Environment 7.1)
    by the way, i can't find the bi post install template in the configuration wizard on the the portal...
    thank's for your help.
    Florent,
    Edited by: Florent BUTTY on Mar 24, 2009 1:43 PM

    Hi,
    Can you please tell me what is the diff between 7.01 & 7.1? if you can share any docs, is highly appreciated.
    Thanks,
    Kiran

Maybe you are looking for