EHP1: Switching to EDIT mode

Hi experts,
I was told on a conference that in EHP1 all assignment blocks can be setup to jump into "Edit Mode" when editing the head of an object and vice versa. We upgraded to EHP1 now but this functionality doesn't work for us even if we turn off all enhancements.
Is there any note to implement for this or such? any help is appreciated.
Thank you and BR
Matthias

Hi Mathias
Please do the following.
1). Check in SAPGUI in SU3 if the user parameter CRM_UIU_OLD_UIC is set --> if yes, please remove it
2). Goto the Personalization of the page and once select RESET TO DEFAULT.
Regards
Leon
Edited by: Leon Limson on Dec 9, 2011 11:17 AM

Similar Messages

Assertion Failed with switching between editing mode of table view

I'm writing an app that can switching between edit mode of a table view
- in edit mode a new line appear at the bottom
- out edit mode this line will disappear
I used insertRowsAtIndexPath and deleteRowsAtIndexPath to achieve this effect, but then during testing, if I switching edit mode too frequently, I got an assertion failure
Assertion failed: (cache->size >= g->size), function evictglyph_entry_fromcache, file Fonts/CGFontCache.c, line 836.
It seems someone has also encountered this before, but I have found no solution yet. Anyone know how to fix it or work around it?

Hi,
Please check if you have entries on the table RSTRANRULE with:
GROUPID   = 'space'
GROUPTYPE = 'space' or 'S'
REF_RULE <> 'space'
If there are inconsistent entries in the RSTRANRULE table such as:
       TRANID         *
       OBJVERS        *
       RULEID         *
       SEQNR          *
       GROUPID        00
       GROUPTYPE      space or GROUPTYPE    'S'
       RULETYPE       space
       REF RULE       *
Delete these entries from the table.
Activate the affected transformations.
More info check the note 998730.
9987300-ASSERTION_FAILED when calling or changing groups, group 00.
Thanks,
Walter Oliveira.

IPhoto corrupts the view of my Nikon D800 photos when zooming or switching to edit mode

I am viewing RAW files from a Nikon D800. Initially the files show correctly but after a while the views starts corrupting when I zoom in and sometimes when I enter the edit mode. The files themselves are ok, it is just the preview that corrupts.
Once this has happened the only way to restore normality is to reboot the iMac. Closing and reopening iPhoto does not fix it.
I am using iPhoto 9.5.1 on OSX 10.9.4 (iMac 21.5-inch, Mid 2010).
I have a Nikon D7000 as well and editing these photos I have no problems. Perhaps it is the larger file size...?
Example of the corruption attached.

That could be an issue with the graphics card.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it is, switch to another user account and repeat the test there.

View is switch not in edit mode

Hi,
I added a new assigmentblock (for this I created a view in BT111H_OPPT). The view displays values from a dependent BOL.
So far so good, but if I switch to edit mode - only my view elements will not switch to edit mode.
I see "<%= controller->view_group_context->is_view_in_display_mode( controller ) %>" this in my view - which will call
method IF_BSP_WD_VIEW_GROUP_CONTEXT~IS_VIEW_IN_DISPLAY_MODE. In the method the statement ME->GLOBAL_EDIT is every time not X - so the view do not switch to edit mode - can anyone help to solve this problem.
Thank you in advance
Paul

Thank you for you fast reply - I tried it today -but as expected I have a few problems (sorry, but I'm new on WebUI development).
My situation now:
in Customizing
ZP1 is the dependent object and Z1 is the Acces Object
ZP1 has Source Object BTADMINH
Z1 has Source Object ZP1
Context Nodes
BTADMINH - mapped to standard custom controller
Z1             - mapped to standard same custom controller (added node this in controller by enhancement)
ZP1             - mapped to standard same custom controller (added node this in controller by enhancement)
context nodes structure
BTADMINH
BTADMINH ->ZP1
ZP1->Z1
Methods
CREATE_CONTEXT_NODES
CREATE_BTADMINH( ). - not changed used the generated implementation 
CREATE_ZSPORDSET( ). - not changed used the generated implementation 
     in this method there is already the       ZSPORDSET->on_new_focus( focus_bo = entity ). implemented
CREATE_ZSPORD( ). - not changed used the generated implementation
     in this method there is already the       ZSPORD->on_new_focus( focus_bo = entity ). implemented
But nothing happens
Do you have an idea what I making wrong? Sorry for that question - (because your answer was great - but I think I 'm not able to transfer to my coding.
Thanks in advance
Paul
Edited by: paul meiner on Sep 24, 2011 10:29 PM
Edited by: paul meiner on Sep 24, 2011 10:30 PM
Edited by: paul meiner on Sep 24, 2011 10:30 PM
Edited by: paul meiner on Sep 24, 2011 10:31 PM

Employee responsible of contact or operation is changed on edit mode

Hello,
When i switch to edit mode on a contact or operation the employee responsible is automatically changed. I have been playing around with partner determination but It seems like standard behaviour if i look at note 1408051.
Is any possible solution for avoiding this?
Thanks.

Solved with custom development

Address Book Notes for New Contacts Appear Only In Edit Mode

When I create a new contact in +Address Book+, exit Edit mode, and then add a Note to that new contact, the note is visible only when the contact is switched to Edit mode. This does not effect existing contacts. This problem first appeared yesterday. I didn't do anything unusual with +Address Book+ before the emergence of the problem.
I followed these instructions to rebuild the +Address Book+ database but it had no effect on this problem: "Quit Address Book and drag ~/Library/Application Support/AddressBook/AddressBook-v22.abcddb to the desktop. It will be rebuilt from the details in Metadata when you restart AB."
Thank you in advance for any ideas you have!
Steven

I exported the contact list and deleted Library/Application support/Address book and then re-imported. Everything is fine now.

Can not edit my program, I know about edit mode

When I run demo programs I can switch to edit mode, but my program will only come up in run mode. I can not switch to edit mode. Those commands are grayed out and edit tools are disabled.

Another possibility: Maybe the VIs had their diagram removed?
This would prevent any editing of course.
LabVIEW Champion . Do more with less code and in less time .

Custom publishing page layouts have undesirable overlapping effect in edit mode

I am very new to SharePoint branding.
I've created several custom page layouts using SPD. They are used in publishing site collections with basic web part zones in various <div>'s for layout purposes. The issue I've run into is that while in display mode the pages work fine,
but in edit mode there is an undesirable overlap that causes the web part editing panel to become obscured or unusable.
I have ran across a few search hits that seem to dance around this topic, but nothing I've found thus far has truly addressed my issue. Am I editing the CSS, master page, page layout or something else to ensure the edit mode is functional?
Thank you all for your time and expertise.

I have solved my own problem, but felt it might be necessary to document it here for those just starting out. For a page layout to display properly, at least for me, I had to invoke the corev15.css classes in my <div> tags to convert to table
elements when switching to Edit mode. While this is ultimately not my first choice, I was able to add some custom styles in this CSS file to style my div's in a more suitable fashion.
On a publishing page, you may have code inside your <asp:Content> tag like:
<div class="welcome welcome-splash">
<PublishingWebControls:EditModePanel runat="server" CssClass="edit-mode-panel title-edit">
<SharePointWebControls:TextField runat="server" FieldName="Title"/>
</PublishingWebControls:EditModePanel>
</div>
From here, I had begun to style my <div>'s with inline CSS but it will break in Edit mode. Here's where I realized you needed to keep consistent with the corev15.css. Here's what should follow:
<div class="ms-table ms-fullWidth">
<div class="tableCol-75">
<div class="cell-margin">
<WebPartPages:WebPartZone id="g_E35F979436254554ABCD54B2AD28A4BF" runat="server" title="Header"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div>
<div class="ms-table ms-fullWidth">
<div class="cell-margin tableCol-50">
<WebPartPages:WebPartZone id="g_A61037130DF64BF09145576D6DB1C679" runat="server" title="Middle Left"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div>
<div class="cell-margin tableCol-50">
<WebPartPages:WebPartZone id="g_F8C0B2FDD77749B3B9274445692F056B" runat="server" title="Middle Right"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div>
</div>
<div class="cell-margin">
<WebPartPages:WebPartZone id="g_7BBC1C180FD84BF08E9E96ED9C5D2B33" runat="server" title="Bottom"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div>
</div>
<div class="cell-margin tableCol-25">
<WebPartPages:WebPartZone id="g_A32DD6684EF447559FF3D6A1539735D4" runat="server" title="Right"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div>
The above code makes a typical 75:25 2-column page with two additional spaces in the left side for extra web parts. I hope by posting this example I can help other young budding SharePoint branding people to get their feet wet. Thank you all for viewing my
issue and I think this can be marked as closed now.

Elements 11 - unable to switch editing modes after installing

Hi, I have just installed Photoshop Elements 11 on a Mac OSX 10.6.8 and I am unable to switch editing modes (quick / guided / expert). In fact, none of the buttons on the top bar responds to my clicks. In addition, I am unable to quit the programme, instead, I have to force quit it each time.

Thanks for the replies. I was able to sort this myself after I watched the the following video on how to reset the Adobe preferences: http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/ I did the manual reset where I moved only the preference file to another location e.g. the Desktop. I restarted my computer. Closed Bridge CS5 that was running in the background and then clicked on Bridge CS6 and the program opened. I decided to take a chance to see if this won't fix it and was elated when it worked. Don't ask my why, but it did the job!

How to switch editing mode from PAL to NTSC on existing project?

Hi,
I'm editing some NTSC footage and half way through it I realized that I am editining in PAL mode. How can I switch my project editing mode to NTSC without loosing all my editing work? When I go to menu Project-Project Settings-General, the Editing Mode drop down for PAL, NTSC is grayed out.
Thank you,
Pavel.

Brilliant.
I have managed to scratch together the following Nikkors.
All optics are clean and sharp.(I had some serviced) I am enjoying collecting as well as using them. Looking for an F2 85mm (manual focus now to complete the acquisition process)
Nikkor 24mm AF f/2.8D 603947 2006
Nikkor 28mm MF f/2.8 479495 1981
Nikkor 35mm MF f/2.8 776970 1974-78
Nikkor 50mm MF f/1.4 362602 1962>
Nikkor 50mm MF f/2 3718402 1979
Nikkor-P micro 55mm MF f/3.5 687849 1971-73
Nikkor 105mm MF f/2.5 1009507 1981>
Nikkor QC 135mm MF f/2/8 391789 1973>75
Zooms:
Nikkor 28- 85mm AF f/3.5 n.a 1986-90
Nikkor 35 70mm MF f/3.3-4.5 2060284 1984>
Nikkor 70- 210mm AF f/4-5.6 n.a 1987

Switch between Edit and Display mode in an input layout?

Hi,
I want to create a button in my planning layout which is input ready, that makes it able to change between display mode and edit mode.
I'm on BI 7.0. And I am using Analyzer/Workboook.
Is this possible using 'SET_DATA_ENTRY_MODE' command?
If Yes, Where should I put this command ? I can't find this in Button Properties.
Please explain in detail.
Thanks,
Srini.

Hi,
This is the correct command. In the button properties, you need to select 'command via command wizard'. There you should select this command and customize it according to your requirement (on/off).

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it.

Switching to Game mode: no MIC in

I've got this annoying problem:
When I use Mode Switcher (that program where there is a thread about here) or manually switch mode (which in the end is the same since mode switcher just simulates some mouse clicks) to Game Mode, my microphone on Mic2 isn't working. If I switch back to Entertainment mode (I only use Entertainment and Game mode and Entertainment is my default) the mic is back again.
I've checked about twenty times if the recording device wasn't changed and I even run a program that changes the recording device to mic2/linein2 every 30 seconds (some games switch the recording device automatically so this program is really sweet) but still got no sound input from the microphone. I first thought it was because I had already a recording program (like TeamSpeak) running, but that wasn't true. Everytime I switch to Game mode, the microphone on mic2 isn't working.
I also tried switching to an other input device and back again with no success.
The breakout box seems to be still switched on (the optical light is burning and I can hear perfectly with the headset).
I just tested to see if the port Microphone would work, and it does work! but since that is on the back of my computer, I want to use the front mic. And of course, it just should be working.
I've had this problem since a couple of weeks now. Before that it only sometimes happened and with a reboot everything was fine again (sometimes now it is too, but the problem occurs much more frequently).
Please help!
Update: it was working again, at least I thought, when I reinstalled the drivers. But after another switch, it didn't work anymore and I still can only use my front mic in Entertainment mode. I now almost am positivly sure it is driver related.Message Edited by TheVirus on 05-27-2006 02:45 AM

I'm having a simular problem, I cant get my mic to work in game mode.
I downloaded updated drivers and installed them, but now I cant get that thing by my clock were you can swich modes and have the mixer; however, I can still switch modes in the audio console.
When in entertainment mode my mic sounds fine. When in gameing mode my mic will work some times, but I will get very bad chopy sounds, but most of the times it wont even work.
Reguardless even if I'm in entertainment mode my mic will just stop working at times, and may start working again later. And no its not my mic because i tried another one that I know works.
I'm ready to take out my sound card and smash it!
Any ideas?Message Edited by BattleFish on 05-30-2006 09:27 PM

"Bad" colors/banding when going into Edit mode with Canon RAW files

Just got my iLife '06 suite yesterday and ran into something very disturbing: something wrongwith the colors of RAW files once you go into editing mode. In the library view, they're fine. Try to edit one, and after a few seconds, there's a final refresh of the image window that heavily alters and bands the colors. (Looks almost like a poor conversion down to 256 colors or less - it's that bad).
This is happening on Canon 300D and 20D raw files, and did NOT happen with iPhoto 5. The RAW files open up and display just fine in Preview (as well as 3rd party apps) - problem is in iPhoto 6 only. I've already sent in a bug report - has anyone else tried double-clicking on a RAW file to go into Edit mode yet?
David Miller

I use Huey from Pantone to calibrate my monitor for consistancy in different lighting situations and across applications. But the same effect happens by choosing any one of the non-standard monitor calibrations.
Try this:
Choose a RAW photo and monitor calibratioin that causes the banding and discoloration.
Open the RAW photo in Edit mode and wait the couple of seconds for banding to appear.
Next, adjust the image size slider so that scroll bars appear at the bottom and right side of the photo. It doesn't take much. Notice the banding disappears!
Now grab one of the scroll bars and move it. Observe the banding and discoloration. And, when you release the scroll bar the banding disappears again.
I don't remember this happening with iPhoto 5.
I think it has something to do with the display
calibration. After I first saw this I switched back
to my default iMac G4 profile, and the problem wasn't
there anymore. I'm not sure what the difference is. I
set up several different profiles, each with
different choices for Advanced, White Point and
Gamma, and some trigger this banding, and some do
not.
Anybody have any similar experiences?

ALV Grid- GET_SELECTED_ROWS returns empty table in edit mode

Hi all,
I saw similar threads on this forum, but didn't find the answer. Do you know if that is possible to force grid to return selected rows when is in edit mode? When I switch to display mode everything works just fine.
regards,
Marcin

It is necessary to enforce the ALV to transport data from the frontend to the backend. Therefore register the event
Register 'Enter' event
CALL METHOD go_alv->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
After then clicking 'ENTER', the data should be available in the ABAP program. Without any user interaction it is not possible (as far as I know).
Best regards,
Thomas

EHP1: Switching to EDIT mode

Similar Messages

Maybe you are looking for