EHP1 Update Using SAINT - Reg

Dear Friends,
We are updating Solution Manager from SP16 to SP 23 using SAINT in ABAP. I have added all the requirements and updating getting SAINT. The Provouge and the Check requirements phase is over. After that it takes a very long time (more than 48 hours)in the * DISASSEMBLE* state. I have checked the Slog. it shows "sapmnt\trans\tmp\SAPKITLORB.SM3 is already in use(87410,87420,87430 etc). I am waiting for 3,2,1 sec etc ". This is the only log shows with reduction in seconds.I have restarted the SAP during disassemble state too, but again it continues with the same log. Pls let me know, Whether i could continue or any otther steps to get imported.
The STATUS/REMARKS in SAINT Shows "The Addon will now be imported with the displayed Queue"
With Thanks,
Lakshmikanth T

HI Sunil/Sunny,
Thanks for your immediate response. I hope this solved the problem and my "DISASSEMBLE" starts to continue with other support package files being adding up in the log directory.
With thanks and Regard
Lakshmikanth T

Similar Messages

Using SAINT to apply NW EHP1

Hi,
Is it possible to use SAINT as opposed to SAPEHPI to install EHP1 for Netweaver? This is not a Solution Manager system and my main attempt is to enhance SAP_BW. Currently on:
SAINT level 33.
SAP_ABA 700 0018
SAP_BASIS 700 0018
SAP_BW 700 0020
Thanks.
Kind Regards,
David Carr
Netweaver Administrator

Hi
I reviewed the Installation guide that Sergo provided the link to and there is a statement that indicates SAP "recommends" using SAPehpi for 64bit machines. I am assuming that this is for performance and reduced downtime more then anything else. In other words there is not an increased risk of data corruption using SAINT versus SAPehpi. Can anyone verify my assumption?
Thanks for all the responses.
Kind Regards,
David

SUM - SPAM/SAINT 7.3 Update using SQL2012

Hi,
I installed a SAP NW BW 7.3 in Windows Server 2012 / SQL 2012 and I'm trying to update SPAM/SAINT via SUM, but this errors occurs:
1 ETQ359 RFC Login to: System="BWD", AsHost="atlas" Nr="00", GwHost="atlas", GwService="sapgw00"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140527175641
1 ETQ233 Calling function module "OCS_API_DELETE_QUEUE" by RFC
1EETQ235 Call of function module "OCS_API_DELETE_QUEUE" by RFC failed (error-status "3")
2EETQ360 RFC of "OCS_API_DELETE_QUEUE" failed:
2EETQ361 code/exception : 3
2EETQ362 key             : DBIF_RSQL_SQL_ERROR
2EETQ399 SQL error 515 while accessing table PAT05.
4 ETQ010 Date & Time: 20140527175641
1EETQ399 Last error code set is: RFC error system BWD nr 00 function 'OCS_API_DELETE_QUEUE' failed with code 3 key DBIF_RSQL_SQL_ERROR: SQL error 515 while accessing table PAT05.
1EETQ204 Upgrade phase "SPAMCHK_INI" aborted with severe errors ("20140527175641")
And generate these two short dumps:
1)
Category               ABAP Server Resource Shortage
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          27.05.2014 18:32:53
Short text
     SQL error 515 while accessing table "PAT05".
What happened?
     Database error text: "Cannot insert the value NULL into column
      'DDIC_ACT_SUBSET', table 'BWD.bwd.PAT05'; column does not allow nulls. UPDATE
      fails."
2)
Category               ABAP Server Resource Shortage
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          27.05.2014 18:45:59
Short text
     SQL error 515 while accessing table "PATHISTORY".
What happened?
     Database error text: "Cannot insert the value NULL into column 'DACT_SUBSET',
      table 'BWD.bwd.PATHISTORY'; column does not allow nulls. INSERT fails."
Can anyone help me?
I didn't find any SAP note, or documentation about this problem.
Thanks!
Marcello

Hi Reagan,
I read this note, but the solution is to re-install the application.
I will do this in last case.
Thanks!

Problem updating spam/saint

Hi all,
While updating spam/saint i m getting following error.
- Error in step: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0212
Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
Any suggestion?
Thanks,
Ajith

Hi,
You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
See note 96907 for further troubleshooting.
Nelis

If you are attempting to update using a Mac or PC with which you do not normally sync

what happens when "If you are attempting to update using a Mac or PC with which you do not normally sync", & they say in step 2 or 3 in order not to loose your stuff "If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync."
now what if the pc that was originally used to sync my ipod , has corrupt or bad systems files that are causing it from working correctly...? when i plug it in to the o.g. operating sysytems (win xp) it doesnt ever recognize or discover the ipod through itunes. the pc will pop up the "cameras been plugged in, what would you like to do...?" but nothing thru itunes. now if i reboot & run the windows 7 operating system w/itunes that has backed my ipod before & synced a few times as well, but not the o.g. op system used from the beginning (the very initial set up done on the ipod) it works fine, but DOES give me the warning "updating to 5.0 willdelete some of your apps & media, including ... ....will only preserve contacts, calenders," ....etc.
MY HUGE CONCERN IS if i do hit update & go through w/it, & not having been able to sync it to the one normally used to sync my ipod, will that back up i made be able to restore my game seetings, GAME SAVES, & data achievement type information....?
please, i'm very hesitant to go through w/it, so if you can please help me out here & let me know asap.....i canimagine you're all busy busy, so i thank you for your time here w/this
thank you
mike z
[email protected]

Not that hard. One the computer you are using do the following:
- Transfer iTunes purchases.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music using a third-party program like one of those discussed here.
Copy music
- If you have synced photos you need a paid program like TouchCopy or PhoneView
- When all the media in on the computer, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
That computer is now your syncing computer. Note that the iPod backup that iTunes makes does not included synced media like apps or music.

My husband bought an iPad 2. I have a Mac. ITunes is in my name but I have turned sharing on. When we updated to OS5 we lost all the free apps that he downloaded in his user name. Is there no way to update using my iTunes without losing his software.

My husband bought an iPad 2. I have a Mac. ITunes is in my name but I have turned sharing on. When we updated to OS5 we lost all the free apps that he downloaded in his user name. Is there no way to update using my iTunes without losing his software. He is frustrated using the iPad because he never knows whether to use his user name or my user name.

Apps are only tied to one account... You can set up two iTunes accounts on your computer, however, and let his iPad sync to his account. If he has never backed up his apps to a computer, however, he will have to redownload all the apps. Afterwards, he can backup to iCloud instead of your computer.
http://support.apple.com/kb/ht1495

How can I script Adobe Reader updates using vbScript, PowerShell or C#?

I would like to script Adobe Reader updates using vbScript, PowerShell or C#, are there any Adobe API calls I use to do this. There are several different version that I support and auto update is not an option. I do updates at a specific time of the month. I would like to write a script that would download and install the update for the currently installed version of Adobe Reader (32 or 64 bit) for the version of the OS (32 or 64bit). I can detect the OS version and the Adobe version. I can download updates but I do not want to hard code anything

Sabian is correct.
Most admins download the updates from the ftp site and push via AIP, GPO, SCCM, or some other method whenever it makes sense for them.
Ben

Document Flow not updated using BAPI_GOODSMVT_CREATE

Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.

Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga

Insert & Update using Writeback in a single Report

Hi,
Here is requirement:
In the single report where the user has to do the Insert & update using the writeback functionality.
below is the XMl:
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SUBMITBUTTON">
<XML>
<writeBack connectionPool="CSDK">
<insert>INSERT INTO HSCRTARGETLOOKUP(SLA_TYPE,TARGET_AVAILABILITY,TARGET_MTTR) VALUES ('@{c0}', @{c1}, @{c2})</insert>
<update>UPDATE HSCRTARGETLOOKUP SET TARGET_AVAILABILITY = @{c1}, TARGET_MTTR = @{c2} WHERE SLA_TYPE = '@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Can you please let us know whether both insert & update will work at the same time using a single report.
Thanks in Advance
Siva

Hi,
Insert & update is working with the Single xml file:
here it is how i have done:
in the 1st criteria i have taken three columns and made union with the 3 dummy columns.
in the 1st dummy column: CASE WHEN 1= 0 THEN HSCRTARGETLOOKUP.SLA_TYPE ELSE NULL END
2nd dummy column: CAST('' AS INT)
3rd dummy column: CAST('' AS INT)
below is the single XML file which is working for both insert & update
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="STATES">
<XML>
<writeBack connectionPool="XXXX">
<insert>INSERT INTO HSCRTARGETLOOKUP(SLA_TYPE,TARGET_AVAILABILITY,TARGET_MTTR) VALUES ('@{c0}', @{c1}, @{c2})</insert>
<update></update>
<update>UPDATE HSCRTARGETLOOKUP SET TARGET_AVAILABILITY = @{c1}, TARGET_MTTR = @{c2} WHERE SLA_TYPE = '@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Hope it works for you also.

Has anyone tried to update using the direct download file of 4.2.1?

My internet connection isn't the fastest at home so I downloaded the update file at my office using the following link :
http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,14.2.1_8C148Restore.ipsw
Any tips on how to proceed with doing the update using this file? I know you have to Option-Click the Update or Restore button, and then browse to the update file, but I was wondering if there is anything else I should do first.

Thanks to both of you - I was running 4.2 on my iPad, and the download link at daw.apple.com for the 4.2.1 GM was taken down after it shipped - so I was bummed...
Found your post with the direct download link - boom! Happy camper...
Aaron

Iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgraded application.

iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgrader application. Repeatedly says it can't locate photos even when told to cancel. I think the photos in question are in Nikon RAW format.

iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
You need to do the following:
1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application.
2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
3 - launch iPhoto 9.5 to open and finish the conversion of the library.
OT

Limit on updates using select_list_from_lov?

Hello All,
Wondering if anyone knew if there was a limitation on APEX as far as how many rows one can update using a select_list_from_lov or select_list_from_query? My query can return as little as 2 rows to as many as 450 rows.
I noticed if I reduce my number of rows allowed per view the update process works just fine reason why I was wondering if there is a limit and is there any way to up that limit?
I have an update process similar to:
FOR i IN 1 .. HTMLDB_APPLICATION.g_f02.COUNT
LOOP
UPDATE TABLE_1
SET FIELD_1 =
REPLACE (HTMLDB_APPLICATION.g_f03(i), '%' || 'null%', NULL),
FIELD_2 =
REPLACE (HTMLDB_APPLICATION.g_f05(i), '%' || 'null%', NULL),
WHERE ID = to_number(HTMLDB_APPLICATION.g_f02 (i));
END LOOP;
COMMIT;
END;
Thanks.

Zala - I can't see how your page works. Can you show an example on apex.oracle.com? Also, you didn't describe a problem. Are you experiencing one when you exceed some limit?
Scott

XSODATA CRUD Operations (Update using not working)

this one works:
service namespace "My.Service" {
   "Schema"."Package::Table" as "Table" keys generate local "ID"
          create using "Package::SP_MySP";
this one doesn't work:
service namespace "My.Service" {
   "Schema"."Package::Table" as "Table" keys generate local "ID"
          update using "Package::SP_MySP";
I am getting a syntax error on the update using statement in the odata service definition.

key field means unique record.
if u try to change a key field it will add a new entry.
to an existing entry with a key combination u can change only the non-key fields.
else u need to delete the record combination and add the new combination.

Due date update using GP APIs?

Hi all
I am working on the Due date update using GP APIs, I have done it at the "process" level. However I dont know how to trigger it at an activity level using GP APIs.
Please tell me how to gain access to the Activity (Action) instance of the next processor from the current one? I have set the Due date statically at the process and activity level. Now I wish to allow the user to change the due date dynamically using GP APIs at the <b>activity</b> level.
Ideas pls......
regards
LNV

An other one!! I have set the due date manually in the process yet I dont see it in the UWL. Any thoughts on this? Thanks again.

How to lock a row before update using UPDATE statement ?

I want to lock a row before updating using the UPDATE statement! is there any "reserved word" that I can append to an update statement so, that the row get locked!, also, will the lock gets released automatically once the update is done or do I have to explicitly release the lock?
how can I do this ?
any help is greatly appreciated.
Thanks,
Srini.

For detail information, see http://otn.oracle.com/doc/server.815/a67779/ch4l.htm#10900
The lock will be released by "commit".
FOR UPDATE Examples
The following statement locks rows in the EMP table with clerks located in New York and locks rows in the DEPT table with departments in New York that have clerks:
SELECT empno, sal, comm
FROM emp, dept
WHERE job = 'CLERK'
AND emp.deptno = dept.deptno
AND loc = 'NEW YORK'
FOR UPDATE;
The following statement locks only those rows in the EMP table with clerks located in New York. No rows are locked in the DEPT table:
SELECT empno, sal, comm
FROM emp, dept
WHERE job = 'CLERK'
AND emp.deptno = dept.deptno
AND loc = 'NEW YORK'
FOR UPDATE OF emp.sal;

EHP1 Update Using SAINT - Reg

Similar Messages

Maybe you are looking for