EHP2 on ERP6.0
Hi,
i have gone through the Installation Guide SAP Enhancement Package Installation
donwloaded the EHP2 from location - https://support.sap.com/swdc > My Company's Application Components->SAP ERP>SAP ERP ENHANCE PACKAGE> EHP2 FOR SAP ERP 6.0>Installation and Upgrade
and also downloaded SAPEHPi from --> swdcDownloadSupport Packages and PatchesEntry by Application GroupAdditional ComponentsUpgrade ToolsSAP EHP InstallerSAP EHP Installer 7.00
placed the SAPEHPi in /usr/sap/<sapsid> and unpacked --> a folder as EHPI has been created.
logged on through sidadm and started the the command /<installation directory>/STARTUP jce_policy_zip=<policy zip archive>
got the message as HTTP server started. & [info]: SL Controller started.
Starting the Installation GUI as http://<host name>:4239 in internet browser, but not getting the installation screen.
Kindly suggest.
Regards!!
Dear All,
i was on the same phase.
downloaded EHP2 for ERP6.0, uncar the file 51032841\ABAP\SAP_APPL 602/DATA, while applying EHP2 through SAINT, i got struck at phase: XPRA_EXECUTION, error as:
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package SAPK-602DXINSAPAPPL, tp step R,
return code 0012
after searching & reading note 822380, i have updated TP, R3trans & DW, but still the same problem.
checked all the checks in STMS.
Kindly suggest, what could be the reason.
Similar Messages
-
NWBC ERP6.0 + EHP2
Hi,
we are using an ERP6.0 System (stack 12), and NW7.0(SPS15). I tried to install NWBC. help.sap.com speaks about a ddic-table NWBC_CONFIG and also about a handler class for icf CL_NWBC_HTTP_EXTENSION.
Wheter the class nor the DDIC-Table is in our system? The documentation describes NW2004s SPS12 as technical requirement, not really about EHP2/ERP6.0
Where to find these Tables/Classes?
Regards,
ChristianHi Christian,
I researched a bit about this.
Please check SAP Notes 1058567 and 692245. These seem to have resolved similar issues.
Also,
Please check how the scripting is activated on your system.If it is in read only mode, you have to set parameters:
sapgui/user_scripting_set_readonly to FALSE and
sapgui/user_scripting_disable_recording to FALSE
Hope this helps.
Regards,
Snehal -
Need help with ERP6.0 EHP5 (BS 2010) an NW 7.0 EHP2
Hello,
We are planning an upgrade to ERP6.0 EHP5 because the ESS services in ABAP-WD.
Ramp-UP will end on 11 July 2011 or some days later.
In the EHP5-Upgrade is also an upgrade to NW7.0 EHP2 necessary.
To start in August the latest ERP6 EHP5 stack 5 is available but we planned to do the upgrade in August with stack 4.
But it seems to be that the Basis-Packages (NW7) doesn't follow compulsive the ERP-Packages
i.e. ERP6.0 EHP4 stack 9 includes NW7.0 EHP1 stack 8 not as mentioned stack 9.
Now I found on SAP following sentences:
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001389482008E
SAP Enhancement Package 1 for SAP NetWeaver 7.0 Support Package Stacks
SPS 08 December 14th, 2010 (available)
If you plan to participate in Ramp-Up of SAP Business Suite Innovations 2010, we recommend to upgrade to BS 2010 instead of implementing this SP. If not Ramp-Up participation will not be possible before SPS 07 of SAP EHP2 FOR SAP NETWEAVER 7.0 is available.
I'm confused about it. Does it mean I can't upgrade to ERP6 EHP5 until NW7.0 EHP2 SP7 is available? I guess this will not be available befor Feb. 2012. I there anyone who has the necessary overview about it?
I where very delighted if someone are able to help me and look forward to hearing from you.
Best regards
HaraldI would say the onboard audio chip is either disabled in the BIOS or dead.
Taking a second look at the device manager screens shot, there is no multimedia audio controller with a ! mark, which would indicate a device that needs a driver.
The screen shot in your device manager shows all drivers are installed.
No onboard Realtek HD Audio device present.
Did you install a video card with an HDMI out port?
If so, then the video card may have disabled the onboard audio because it has an HDMI audio chip on it.
Go into the BIOS and look for an onboard audio setting. It will be set to auto or disabled.
Change the setting to enabled. Save it there and again when you exit the bios.
Reboot, and your onboard audio should be back. -
EHP2 - EHP7 Upgrade Path using SQL Server 2012/Win Server 2012 R2
Hi Guys.
I have question regarging Upgrade Roadmap for a ERP 6 EHP2 system based on NW 7.01 which I would like to Upgrade to ERP6 EHP7 SP7
Source System is
Windows 2012
SQL Server 2008 R2
EHP2 for ERP 6.0 SPS Level 14
Target System
Windows 2012
SQL Server 2012
EHP7 for ERP 6.0 SP 7 based on NW 7.4 SP 9
During Upgrade checks it says I must Upgrade Database first before continue since DB Release is too low for NW 7.4 SP9 as stated in Note
1951491 - Minimal DB system platform requirements for SAP NetWeaver 7.4 SP08
So, at this point I agree i have to update SQL Server to 2012 before next step
Now, my concern is that my Source System does not have the minimum NW SP level (14) to run under SQL Server 2012 which is 26.
Im currently running SAP Kernel 721 EXT Level 401 which is above mininum
According to Note 1651862 - Release planning for Microsoft SQL Server 2012 that would not be possible
Existing systems of SAP products that are out of SAP maintenance can be upgraded to SQL Server 2012 in order to prepare a SAP upgrade, if they match the SAP NetWeaver Support Package requirements defined below.
SAP products prior to SAP NetWeaver 7.0 are not supported at all on SQL Server 2012.
Required minimum SAP Netweaver Support Package Stacks (SPSs) for SQL Server 2012 (SAP ABAP, SAP ABAP+JAVA stacks)
SAP NETWEAVER 7.0 - SPS 26 (SAP BASIS 26, SAP BW 28)
SAP EHP1 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
SAP EHP2 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
SAP EHP3 FOR SAP NETWEAVER 7.0 - SPS 03 (SAP BASIS 03, SAP BW 03)
SAP NETWEAVER 7.1 - SPS 14 (SAP BASIS SP14)
SAP EHP1 FOR SAP NETWEAVER 7.1 EhP1 - SPS 10(SAP BASIS SP10, SAP BW SP10)
SAP NetWeaver 7.2 - no restriction
SAP NETWEAVER 7.3 - SPS 07 (SAP BASIS 07, SAP BW 07)
SAP EHP1 FOR SAP NETWEAVER 7.3 - SPS 03 (SAP BASIS 03, SAP BW 03)
If your system is running on a SPS lower than the one required above, you have to apply the minimum required SPS before upgrading/migrating to SQL Server 2012.
If you install a NetWeaver product on SQL Server 2012, the required SPS for your product must be applied immediately after the installation - see SAP note 1676665, section I for more information.
But performing the Upgrade would be technically possible? I mean not for productive use but technicaly during that time the Database is Upgrade and during SUM Execution.
According to the note it states if you install a Netweaver Product in SQL Server 2012, SPS must be applied immediately, so is kinda ambigous what SAP is saying.
Best
MartinHi Martin,
For a test scenario, there's no harm in trying it (other than spending a lot of time on it, but hopefully that will prove not to be a waste). Generally, I expect you'll be fine upgrading your DBMS even though you aren't on the required minimum SP yet. The main thing you'll be missing out on is the updates to DBACOCKPIT, but once you do your EhP upgrade (with sps update included), you'll be putting that in place.
So, you could try this on your sandbox system and see if there are any problems. I assume the intent is to start the EhP upgrade as soon as the DBMS upgrade is done, right? In other words, you won't be actually using the system without the required SP except to run the EhP upgrade?
Alternatively, you could do a minimal support pack update, perhaps just a Basis SP only, to the minimum SP needed for your current release, then do the DBMS upgrade, then proceed with the EhP upgrade. This would be the safest procedure, but, as I said, I expect you can probably get away without going to this level without much problem. Again, the idea would be minimizing the time between the start and end of the total project on each system (DEV, QAS, PRD, etc).
Regards,
Matt -
Which version Diagnotics Agent to install for ERP6 systems using SM 7.1 ?
Hi,
I have a recently installed Solution Manager 7.1 system and would now like to add our managed systems for monitoring.
Our managed systems are all running NW EHP2 / ERP6 EHP5 and I have installed the latest SAPHostagent 7.2 on each of these systems. These systems are non unicode running on Suse Linux Enterprise 10.
I'm confused as to which version Diagnostic Agent to install for this setup. Under Solution Manager 7.1 in SWDC the managing agents are for a 7.3 installation only and the prerequisites require Suse Linux Enterprise 11. I'm not sure whether I can use agents located under older Solution Manager systems.
With the above information in mind can you help ?
Thanks.
Regards,
NelisHi,
Please look in the table provided in below link.
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents#DiagnosticsAgents-Whichagentversionshouldbeused%3F
Regards
Vivek -
Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails
Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcomeHi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal -
ERP6 upgrade, PREPARE error
Hello!
Have anyone seen this PREPARE error message before?
During phase RUN_RSPTBFIL_PREP, error message "2EETG011 Kein Upgrade aktiv".
I can't find any SAP note about this specific problem. The source system is 4.6B, the target will be a non-unicode ERP6 SR3, the os/db is AIX53/ora102.
//Fredrik
root@serverX:/usr/sap/put/log:more RSPTBINI.LOG
1 ETQ201XEntering upgrade-phase "RUN_RSPTBFIL_PREP" ("20080923124421")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ010 Date & Time: 20080923124422
4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_PRP_PUTTB" in batch
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSPTBFIL" with job count "12442401" scheduled
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20080923124428
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ399 ext. env.: DIR_LIBRARY=/sapmnt/SNB/exe
4 ETQ399 ext. env.: LIBPATH=/sapmnt/SNB/exe:/usr/lib:/lib:/usr/sap/SNB/SYS/exe/run:/oracle/SNB/102_64/lib64
4 ETQ399 2008/09/23 12:44:29: put_execute: (tp) forkpid:2142240
2EETQ241 Errors found in logfiles - accumulated in file "RSPTBINI.ELG"
1EETQ203 Upgrade phase "RUN_RSPTBFIL_PREP" aborted with errors ("20080923124430")
root@serverX:/usr/sap/put/log:more RSPTBINI.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB initial filling ERRORS and RETURN CODE in RSPTBPTB.SNB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETG011 "Kein Upgrade aktiv"
2EETG011 "Kein Upgrade aktiv"
root@serverX:/usr/sap/put/log:Hello Andreas, old friend from e-motion technology!
I did open a OSS-case some days ago, and we rerun the phase successfully.
I'm now waiting to hear from SAP-support, what they did, with their magic sticks, to fix this issue.
//Fredrik -
ERP6.0 EHP7 Upgrade error in phase PARCONV_TRANS
Hello,
If you have any idea or information , I hope your help!!
I'm upgrading ERP6.0 to ERP6.0 EHP7.
I have encountered the error in MAIN_TRANSEXEC/PARCONV_TRANS.
The error mesaages is like this:
Detected the following errors:
# Y:\SUM\SUM\abap\log\NCONV00.Q4R:
4 EDA093 "DDL time(___2):" ".........1" milliseconds
2 EGT066 Request for "/BA1/F4_RELEASE" executed successfully
1 ED0327XProcess..................: "MKIGTT01_10_15604"
2 EGT052XRequest: Create "Index /BCV/D_SSHOTT-SID (DDIC/10.07.14/20:12)"
3WEGT122 Nametab of table "/BCV/D_SSHOTT" with status "A" does not exist
2EEDA127 Table "/BCV/D_SSHOTT" for index "/BCV/D_SSHOTT~SID" does not exist in the database
2EEGT082 "Index" "/BCV/D_SSHOTT-SID" could not be created
2 EGT067 Request for "/BCV/D_SSHOTT" could not be executed
1 ED0327XProcess..................: "MKIGTT01_10_15604"
2 EGT052XRequest: Create "Index /BOBF/DM_LTXT_C-PAR (DDIC/10.07.14/20:12)"
3WEGT122 Nametab of table "/BOBF/DM_LTXT_C" with status "A" does not exist
2EEDA127 Table "/BOBF/DM_LTXT_C" for index "/BOBF/DM_LTXT_C~PA" does not exist in the database
2EEGT082 "Index" "/BOBF/DM_LTXT_C-PAR" could not be created
2 EGT067 Request for "/BOBF/DM_LTXT_C" could not be executed
...skipped 4006 more lines.
Please see PARCONV.html for more information.
I checked the table status. There were no database tables.
This is my second upgrade of EHP7. At first time , I choosed 'Starard' mode.
At this time I choosed 'Single System'.
I activated one table(/BA1/F4_RELEASE) and repeated phase , then passed its table.
But there are almost 1,300 talbes.
Is this bug of 'Single System' mode ?
Or is there any solution?
My configuraion is
OS: WIndows 2008 R2
DB: SQL Server 2008 R2
CPU: 2
memory: 16GB
Best regards,
Naritoshi AOKIPlease don't use Single System mode for EHP7 Upgrade.
1926261 - Central Note - Software Update Manager 1.0 SP11 [lmt_007]
As per this note,
Part C: General Problems / Information
I/ Important General Information
a) General
--------------------< D024828 JUL/07/2014 >-----------------------------
No Single System mode for target release >= SAP_BASIS 740 SP5
The preconfiguration mode Single System cannot be used for systems with a SAP_BASIS target release 740 SP 05 or higher.
Best regards
ashish -
Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4
Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399 (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus -
while i was applying EHP4 to my ERP6.0 system using Enhancement Package Installer i got the following error in the Downtime roadmap:
Severe error(s) occured in phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!
Last error code set: RFC_ERROR 2: DUMP_ERROR
i checked the RSUPGBWD.LOG and here is what i found:
1 ETQ201 Entering upgrade-phase "JOB_BATCHCHECK_XPRA" ("20110503131506")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_BATCHCHECK_XPRA'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSUPGBWD'
2 ETQ399 Arg[1] = ''
2 ETQ399 Arg[2] = 'IGNORE'
2 ETQ399 Arg[3] = 'RSUPGBWD\.$(SAPSID)'
2 ETQ399 Arg[4] = '3'
2 ETQ399 Arg[5] = 'Batch execution checker'
2 ETQ399 Arg[6] = 'RSUPGBWD.ELG'
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ010 Date & Time: 20110503131506
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
5 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
i also check ST22 for the error and i found this:
Runtime Errors CALL_FUNCTION_CO
Date and Time 03.05.2011 13:15
Short text
RFC error when sending logon data.
What happened?
An error occurred when executing a Remote Function Call.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An error occurred when executing a Remote Function Call.
Status of connection.... "-"
Internal error code.... "-"
How to correct the error
So any clue with that error?Hello Waseem,
I would recommend to update to the latest disp+work but also check in sm21 and find the work process that encountered the error. Then see in the corresponding work process trace file dev_w* for the real error that occured.
e.g. If you see ERROR => RFC Signon> Failure in ab_MakeTicketSndExternal calling
check note 1532825
and the report RS_TT_CLEANUP_SECSTORE
Regards,
Paul -
Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5
Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh JagtapDear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek -
Error in Phase START_SHDI_FIRST for Upgrade to ERP6 SR3
Hi Folks
We are performing a test upgrade 46C to ERP6 using the SR3 CDs and I'm stuck at the START_SHDI_FIRST stage.
It's not the "usual" .acl problem.
Here is an excerpt from the SAPup joblog. I also get the same result if I logon as <SID>OFR add the 700 Kernel and use STARTSAP.
Calling STRRMTDB...
Environment variable does not exist.
Environment variable added.
Job 029650/P01OFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Start profile is "/usr/sap/put/P01/SYS/profile/START_DVEBMGS38_tegerppd".
Executable directory is "/usr/sap/put/exe".
Checking Kernel...
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
StartInstance: Program STRSBSJOB does not exist (ILE).
O4STRSAP: Starting instance 38 of system P01 on host tegerppd failed.
Errors occurred in command.
Errors occurred in command.
STRSBSJOB does exist in the Kernel library and appears in /usr/sap/put/exe as a link.
Not sure where to go from here.
Any suggestions?
Thanks
SteveHi Steven,
I think, you are trying something forbidden here ;-((
You are in the uptime and try to use STARTSAP for the new kernel, which is not ok.
The correct way to start the shadow is as follows:
- logon with sidofr
- addlible sapup
- check, that the shadow instance is totally down - otherwise kill all processes there
(you could use (try) the following instead as well:
SAPUP UPGDIR('/usr/sap/put') PARMLIST('stopshd') )
- SAPUP UPGDIR('/usr/sap/put') PARMLIST('startshd')
Then it is interesting to see the errors ....
btw:
the well-known error is really not there ?
edtf '/usr/sap/put/X85/SYS/global/ms_acl_info'
HOST = * <<< correct
Then, I do have the next idea as the new second in future "well-known-error":
The locales in the OS will miss for DE and/or US ;-((
In the old kernel, this was no issue, but now, SAP changed its mind and doesn't deliver them as fallback any more ;-(
(note 1077496 tries to explain this change, but I was not able by now to understand this note or to see that it really works like this - especially as I never have the chance to install complete further languages just for this !!!)
My check is always:
Please check with CALL QP2TERM: (NOT QSH!)
cd /usr/lib/nls/loc
ls en*
ls de*
(normally in this directory there are links only, but you can place true
locales here as well)
You need at least the following ones:
en_US.ISO8859-1
en_US.ISO8859-1__64
de_DE.ISO8859-1
de_DE.ISO8859-1__64
=> I do have all needed locales for download and place them (a bit illegal) into /usr/lib/nls/loc - if you are interested in this, let me know.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Upgrade to "R/3 4.7" to "ERP6.0".
Dear All,
Currently "BI 7.0" and "R/3 4.7" are connected.
And I plan to upgrade "R/3 4.7" to "ERP6.0".
But After I upgraded to the "ERP 6.0" and "BI7.0" in connection with a problem is fear.
Could you please teach the following poitns.
①Upgraded from "4.7" to "ERP6.0" when the problem occurred?
②Others point to a cautious?
Best regards,
KoHi,
Yes, there is away to deactivate new depreciation calculation/enterprise asset management module even though EA-FIN is switched on in ERP 6.0. Below are essential details from SAP help before upgrade to ERP6.0 for your perusal.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/44/558b1099c93672e10000000a114a6b/frameset.htm
Happy upgrading...
Kind regards,
John Chin -
Double-click to create method/attribute in EHP2 Netweaver 7.0 does not work
Hi,
this makes me wonder:
I'm used to create new attributes or methods by simply double-clicking the new name and the system will ask me to create. Now I am new in EHP2 and for methods it just says 'wrong cursor position or object not in navigation', for attributes system just does not show any reaction.
Please help me as it is really annoying always to create things from object tree or class header.
What is it I do not see?
Thanks so much.
ClemensHi,
sorry I thought it was clear: I try in the new ABAP front end editor - accessed through SE80, SE24, SE38 and anay transaction that allows you to edit code (except lousy things like the enhancement spot implementation code window).
An it is still the same: In a report, I can write perform xyz and double-click will asjk me to create a form. Just in oo context, attributes and methods should be the same - as it was since ECC600 or even before on 46C. Except our current system I don't know anyone working on EHP2 for Netweaver 7.
EHP2 just another undeclared untested Beta-Version?
I can't believe.
Regards,
Clemens -
Error while running EHPI Tool for upgrading EHP2 ON Netweaver as abap
Hello Guys,
Hope you guys are rocking...
we are in the process of upgrading the SAP Netweaver version from SAP NETWEAVER 7.0 to EHP2 Through EHPI Tool in the preparation phase we are facinga issue....
ERROR: The new SAP tools in /usr/sap/EHPI/abap/exe cannot connect to your database.
Possible reasons are:
- Environment variables are not properly set for the version of the
database client which is used by the new tools.
- Required database libraries are not accessible or cannot be found neither
through a compiled-in path nor through explicit search via the
shared library path.
- Auxiliary files such as language files etc. are not compatible with
this version of the database client.
Please check database / OS specific notes referenced in the manual for more help.
The log file /usr/sap/EHPI/abap/log/DBCONNCHK.LOG contains more
details about the failure.
done latest kernel upgrade in sys /exe/run and ehpi/abap/exe
and tested connection from EHPI/abap/exe r3trans -d success.
please do needful.
Regards,
SyedDear Syed,
Regarding the issue faced by you please make sure you download and replace the the latest patch of
tp, R3trans and Database Library (dbsl library) of target release(720) to the /usr/sap/EHPI/abap/exe and /exenew
directories and then restart the EHPI tool (repeat the phase).
Also check if the file dboraslib.sl was existing in the new patches and folders which are replaced.
Look into Note 830578 - Oracle database 10g: Unix environment variable
to check the environment variable are set properly or not.
This should resolve your issue.
Best Regards,
Abhishek
Maybe you are looking for
-
How do I delete already downloaded app from apple account so kids cannot redownload them
Hi, My kids somehow manage to download a game app on my iphone while it was signed into my apple account. Now even if I deleted that game they can always go into the app store and search for that game and download it again without having to put a pas
-
Dynamic Select List based on TextField data
Hi, I like to dynamically display the select list based on the value in the textfield, the data in the textfield is of character type. Thanks
-
Animate image behind mask, without mask moving
Hey guys this is probably really easy but this is my first run at doing a video project and cant get this to work for the life of me! OK, I have 3 images which I imported from PS CC ( AE is CC as well for reference ) a company logo, a spacer line the
-
Activity activation after check in
Hi, I checked in an activity and try to activate that one. But after 5 days the activity is in Open state(Queued state in CBS). Could anyone help me out this? Thanks, Anumit
-
Any difference between Java and Javaw, thanks
I can launch my program with java successfully. But on the same setting, javaw failed. WHY? Thanks