EHP3 Instalation - confuse

Hello
im with doubt. STEP's
many notes many stuffs confuse
1) I have SAP ERP ECC6 SR3, new installation its come with SP11 and SAINT/SPAM v26 ( i think its enough)
2) I have downloded the 51033040_1 SAP Enh. Package 3 for SAP ERP 6.0 1 of 6
3) I extracted to EPS\In
There is anythiing i need to do before?
any installation, any step?
or just next step is "Start" and put the passwords.
i started, but, it ask pre-requisite for ECC-VPACK 601 i dunno why....
because its ask me prerequisits :S, shoud i ignore?? i read notes balbal
its whole confuse.
Regards,
amit
Edited by: Amit Pratapcim on Mar 2, 2010 12:21 AM

Hello
I have now:
- ECC 6.0 SR3 , SP11
- SAINT 36
- Last Kernel
- I have downloded the 51033040_1 SAP Enh. Package 3 for SAP ERP 6.0 1 of 6
SP - Basis 16
NOTE Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0
          o For Enhancement Package 3, you require the Support Packages of ERP 6.0 Stack 08 or an installed Enhancement Package 2. In the second case, all EHP2 components that are installed in the system must be upgraded to EHP3. A mixture of EHP2 and EHP3 components is not permitted. - OK
          o ERECRUIT 603: For ERECRUIT 603, include at least Support Package 01 in the queue to avoid subsequent errors in the application.- I DOWNLOADED AND ADDED WITH OTHER 51033040_1 SAP Enh. Package 3, did notinstalled yet.
          o FINBASIS and SEM-BW 603: There are some missing workflow templates with FINBASIS and SEM-BW 603 AOI and AOU packages. These objects are shipped with respective support package 01 of the components. You should import these Support packages to get these missing workflow templates.-> I DOWNLOADED AND ADDED WITH OTHER 51033040_1 SAP Enh. Package 3, did notinstalled yet.
          o If you have not already installed the required Component Support Packages in your system, we recommend that you import them in the same queue with the EHP3 components.
            For more information, see Note 83458.
            Exception 1: BEFORE the installation of IS-OIL 603, you must import SAP_BASIS 700 Support Package 12 (SAPKB70012) and Notes 1118861 and 1089194 or SAP_BASIS 700 Support Package 13 (SAPKB70013) into your system. It is not sufficient to include these Support Packages in the installation queue. ->INSTALLED
            Exception 2: BEFORE you install FINBASIS 603, you must either implement Note 1022755 or import SAP_BASIS 700 Support Package 16 (SAPKB70016) to avoid errors in the FINBASIS DDIC activation. ->INSTALLED
          o If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
---Whats THAT?
          o Caution: The component ECC-VPACK 603 is an uninstall package (SAPK-60300INECCVPACK). You require this uninstall package only if you have installed Enhancement Package 1 (ECC-VPACK 601). Otherwise, you must not include it in the queue.-> not applicable now.
i dont have nothing about ehp1, because i restored my other backup
SAINT : after whole that, i start importing but, i select whole package, 1rst problem:
"OCS package SAPK-60300INECCVPACK does not matchthe current software component vector"
SAPK-60300INECCVPACK X
Prerequisite set 01 X
ECC-VPACK,601 Add-on ECC-VPACK Release 601 is not installed
I need to install this??? strange!!!!
ERP2005_EHP_03                      SAP ERP 2005 Enhancement Package 3
       EA-APPL     603     EA-APPL 603 Upgrade     Upgrade     SAPK-603DHINEAAPPL
       EA-DFPS     603     EA-DFPS 603 Upgrade     Upgrade     SAPK-603DHINEADFPS
       EA-FINSERV     603     EA-FINSERV 603 Upgrade     Upgrade     SAPK-603DHINEAFINSRV
       EA-GLTRADE     603     EA-GLTRADE 603 Upgrade     Upgrade     SAPK-603DHINEAGLTRAD
       EA-HR     603     EA-HR 603 Upgrade     Upgrade     SAPK-603DHINEAHR
       EA-PS     603     EA-PS 603 Upgrade     Upgrade     SAPK-603DHINEAPS
       EA-RETAIL     603     EA-RETAIL 603 Upgrade     Upgrade     SAPK-603DHINEARETAIL
       ECC-DIMP     603     ECC-DIMP 603 Upgrade     Upgrade     SAPK-603DHINECCDIMP
       ECC-VPACK     603     Upgrade     SAPK-60300INECCVPACK
       ERECRUIT     603     Upgrade     SAPK-603DIINERECRUIT
       FI-CA     603     Upgrade     SAPK-603DHINFICA
       FI-CAX     603     Upgrade     SAPK-603DHINFICAX
       FINBASIS     603     Upgrade     SAPK-603DIINFINBASIS
       INSURANCE     603     Upgrade     SAPK-603DHININSURANC
       IS-CWM     603     Upgrade     SAPK-603DHINISCWM
       IS-H     603     Upgrade     SAPK-603DHINISH
       IS-M     603     Upgrade     SAPK-603DHINISM
       IS-OIL     603     Upgrade     SAPK-603DHINISOIL
       IS-PS-CA     603     Upgrade     SAPK-603DHINISPSCA
       IS-UT     603     Upgrade     SAPK-603DHINISUT
       LSOFE     603     Upgrade     SAPK-603DIINLSOFE
       SAP_APPL     603     Upgrade     SAPK-603DHINSAPAPPL
       SEM-BW     603     Upgrade     SAPK-603DIINSEMBW
does i need install anything else?
regards
Amit

Similar Messages

Windows 7 with 11g ODBC install confusion...

Hi all,
Ok, I am just a little confused. All I need to do is get ODBC running under Windows 7. I figured this would be easy, but apparently not. I am trying to install Oracle 11g 64 bit on a new Win 7 computer. This is to set up a "typical" end user system and is NOT for development.
I first went to the 11g download page (http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html ) and downloaded the client software (win64_11gR2_client.zip). I unzipped and installed that. I was able to run NetAdmin and edit the TNSNAMES.ora file. However, when I ran the MS ODBC manager - there were no Oracle driver options. I tried this with both the InstantClient and Runtime options.
So I figured I had missed something. I ran the deinstall and then did a system restore. I read the docs in the install and here on the forum and saw references to the instant client installs.
It told me to download the Basic Instant Client and ODBC Instant Client packages from the Oracle Technology Network Instant Client page, so I went to link http://www.oracle.com/technetwork/topics/winx64soft-089540.html and downloaded both the instant client (instantclient-basic-win-x86-64-11.2.0.1.0.zip) and the ODBC module (instantclient-odbc-win-x86-64-11.2.0.1.0.zip)
I unzipped the client-basic first per the odbc docs. No docs, just a readme with no details. And nothing named install. I did see two .exe files (adrci.exe and genezi.exe) but netiher was a clear install package. Nor was there a .msi package. So, in reading the docs, I tried to determine if "deployed" meant unzipped or installed. So I unzipped the instant ODBC files into the instantclient_11_2 folder and ran the ODBC_install. There was no reference to NETADMIN in the startfolder, but there was an ODBC shortcut - which I ran. It showed the ODBC drivers, but when I got to the TNS Service Name and clicked on the "down arrow", all I saw were what appeared to be garbage entries. There was no TNSNAMES.ora file to be found.
Ok, so now I reinstalled the initial download and then tried to add the ODBC stuff to that.... No luck.
I Ran the universal installer and tried to get it to load the ODBC stuff - but there were no .xml files (which is what it apparently wants) to load. And when I tried to install the instant ODBC, the universal installer still didn't appear to see ODBC stuff...
So I can install the first and be able to edit TNSNAMES.ORA. Or install the second and see an ODBC driver - but not configure it because I can't reference a TNSNAMES.ora file. Or do both and just get frustrated because both installs IGNORE the other....
Oh, if I run the NetAdmin and create a TNSNAMES entry - when I test it, it can connect to the server. But I just can't get the ODBC Oracle driver to find that file.....
IAC, what do I need to download (just the minimum oracle 11g) to an end user's win 7 x64 computer so that I can configure the TNSNAMES.ora settings and setup the ODBC connection?
Anyway, I am sure there is an easy answer to this. And I would be happy to mark your response as an answer so you get the credit you deserve for helping me.
And it would be even nicer if there was a little more support about ODBC in the docs that come with both the standard client and the instant client installs.
Thanks,
JustMe
Edited by: justme on Feb 8, 2011 3:39 PM

Greg,
RE: Instant client.
1) It did not come with a TNSNAMES.ora file nor was it clear where I would place the one I have so it would work.
2) I did try enter a valid entry, but it would not work (my guess is that I didn't copy the TNSNAMES.ora to the right folder).
RE: Standard install:
1) It installed the TNSNAMES.ora file and apps to manage it. I was even able to test and confirm that it worked. But when I ran the MS ODBC manager, there were no references to the ORACLE drivers, so I couldn't create one to reference the TNSNAMES.ora file I had created.
You have given me a few ideas and I will try some of them (running the standard install option in custom mode, copying the TNSNAMES.ora file to every folder in the instant client install, using just the 32 bit versions, etc.) If any of those work, I will report back. If you have any idea on how to resolve the above issues, I would certainly appreciate it as well.
Thanks,
JustMe

Clean Install confusion persists

In a previous thread:
http://discussions.apple.com/message.jspa?messageID=8559606#8559606
some questioned my continued desire to ensure users not get confused between clean install and archive and install. Rest assured, there are good reasons to clarify what's clean install versus archive and install.
1. Mac OS 8 and 9 used "Clean Install" to refer to a process most similar to 10.2 and higher's "Archive and Install."
2. Book authors of Mac tech support have inconsistently used the term "Clean Install" to sometimes mean "Erase and Install," and sometimes "Archive and Install."
3. Archive and Install can yield unpredictable results when installing an older over a newer system. This was not a problem with Mac OS 8 and 9's Clean Install because in Mac OS 8 and 9 no dependencies for the operating system were outside the System Folder, whereas in Mac OS X there appear to be a few that are not covered.
When users request help and say they have "clean installed" I continue to ask for clarification, because I have no idea whose "book" they believe to be fact, and whose book they don't, and I want to make sure they have not put themselves in a situation where Archive and Install can fail, or where they have not backed up their data prior to erasing their hard drive, or are not about to put themselves in one of these situations.
Message was edited by: a brody

My opinion is that sometimes the context of a post makes it clear what is meant by a "clean" install, sometimes it doesn't, ... & usually it doesn't matter.
Sure, posts would be a little clearer if everyone used proper terminology like "Archive & Install" or "Erase & Install" but remember that for many (maybe most?) topics it matters just as much if potentially "dirty" items were retained or added back to the new install afterwards.
For an Erase & Install this can & often does happen because Migration/Setup Assistant runs automatically & offers to migrate all manner of items from a backup into the "clean" (here meaning "fresh") install. For an Archive & Install it often happens because the "Preserve Users and Network Settings" option is selected. Even when it is not, items from the Previous Systems folder may be manually dragged back into the current one or placed there by other means.
Some users are aware that doing any of these things compromises the "cleanliness" of the final result & some aren't. But my point is if they said they did an "Archive & Install" or an "Erase & Install" instead of a "clean install" it would be no clearer if they did or did not retain or add back suspect items. Unless users are very clear about exactly what they did, we still would need to ask for clarification.
Message was edited by: R C-R

Mavericks Install Confusion

I have downloaded the install package and launched the installer but after the licence agreement the process stops, I have restarted adn downloaded for a second time but the same thing keeps happening. Has anyone got any ideas ?

Hi JayBoy1978,
If you are still having issues with your Mavericks install, you may find the troubleshooting steps in the following article helpful (it's an older article, but most of the steps should still apply):
Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
http://support.apple.com/kb/ts1394
Regards,
- Brenden

Can't install confuse because there is a problem with a pgp signature

Can anybody give me a hand with this? http://pastebin.com/g2qLLzpb

I just confirmed I get the same error here, so that rules out the most likely problems of not having package signing properly set up or a corrupted download.
Refreshing the keys, however, solved it. `pacman-key --refresh-keys`
Last edited by Trilby (2013-01-24 12:28:21)

Going from EHP3 to EHP4

Experts,
We already have ECC6.0Ehp3. After installing EHp3, we activated 2 business function sets in SFW5 and followed the normal processes to get this moved into the other clients. No problem!
That was many months ago. now, we are ready to do Ehp4 and that is my question.
Knowing that we are already on EhP3 and have already activated business function sets, eg ISU_UTIL_1 / ISU_UTIL_WASTE, etc.
So once we finished the install of EhP4 via the Enhancement Pack installer, will we need to go back to SFW5 and activate business function sets again? We already have all the functionality we need from when we did the SFW5 after EHP3 install, I don't want to activate anything new, but I wonder if that is a requirement when going from one EHP to a new one? If so, how do we keep from overwriting the config we already have?
I have fully read the following guides:
Note 337623 - Customizing after installation or upgrade
The specified item was not found.
https://websmp202.sap-ag.de/~sapidb/011000358700000931872009E.PDF
https://service.sap.com/erp-ehp
https://service.sap.com/ehp-inst
But I still don't have an answer from these. Any insite would be much appeciated.
Thanks,
Nick

Hey Sunny,
Thanks again for following up, but I have seen this and fully read the note. Let me be more specific:
Is there any one out there who has applied a previous ECC Enhancement Pack (like EHP3, then activated a business function set in SFW5 (like IS-util), then copied the customization to all clients....and THEN at a later date applied EHP4 ???
If so, after applying EHP4, did you AGAIN have to go into SFW5? If not SFW5, did you have to use SCU0 to find additional features from existing business sets in client 000 and again copy that into the productive clients?
I know what the ambiguous documentation says, but when it comes down to REALLY doing this, I am still not clear. Please don't bother cutting/pasting sections from the tech guide and SAP note I have already referenced in a previous post. I have ready them....
Maybe I'm over-thinking this.....
Also, what if I wanted to activate a complely new business function set? After activating in SFW5, has anyone done this in a way that copies the new functionality in 000 but does not stomp on the previous customization from other activations?

IS- Retail - Cycle count during business hours

Hi ,
I am trying to do cycle count thru the POS system, and this is during business hours. We want to perform cycle count at the stores using the POS system and update SAP. I checked in SAP Help and its very confusing and its not step by step. The config path provided in SAP Help also is not updated. Is there any documents or materials that anyone of you can provide me. Any information provided is appreciated.
Thanks,
Amauris.

Hi,
SAP has introduced this new functionality called Physical Inventory during Opening hours along with EhP3 along with POS DM. Which means in case you want to carry out physical inventory during business hours, you will require POSDM as well as EHP3 installed as well as relevant Business function set activated to carry this out.
In case you do not have POSDM in your landscape i dont think you can do it.
Hope this helps
Regards
Manish

EhP4 - EXSORT_NOT_ENOUGH_MEMORY Error during EhP4 installation on WIN32

Hi Gurus.
I am installing EhP4 on win32 system.
Background:
ERP 6.0 with EhP3 installed.
Windows Server 2003 on 32 Bit /fastdetect /3GB /PAE
3G enabled
PAE enabled
I have referred to most of the threads on the error but no luck.
Please find error details below:
-   Error in phase: DDIC_ACTIVATION
-   Reason for error: TP_STEP_FAILURE
-   Return code: 0012
-   Error message: OCS Package SAPK-40401INEAIPPE, tp step A, return code 0012
Runtime Errors         EXSORT_NOT_ENOUGH_MEMORY
Date and Time          17.06.2010 20:18:40
Short text
Internal error: Too little memory for the external sort
What happened?
Error in the SAP kernel. The current ABAP "RADMASDSC" program had to be terminated because the ABAP processor detected an internal system error
SAP runtime system internal error.
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server esmart03_ESM_00 on host esmart03 (wp 7)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 2207
The error reported by the operating system is
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 1709536
Extended memory (EM)........... 386729920
Assigned memory (HEAP)......... 1639377312
Short area..................... " "
Paging area.................... 65536
Maximum address space.......... " "
Thanks in advance for your help.
Regards
Shreeshail
Edited by: Shreeshail Ganiger on Jun 18, 2010 8:28 AM

> The amount of storage space (in bytes) filled at termination time was:
> Roll area...................... 1709536
> Extended memory (EM)........... 386729920
> Assigned memory (HEAP)......... 1639377312
You may try to offer the system more heap memory by decreasing abap/heap_area_nondia.
Any reason why you don't use a 64bit OS? 32bit is deprecated and you may see other memory related errors...
Markus

EhP4 with JSPM/SAINT on a Windows x64 System

Hello everybody,
we have a non-productive System (Demo) with EhP3 installed (Dual-Stack) on a Windows 2003 Server x64. Due to a lack of ressources i probabaly wont be able to gather another ~200GB for the required Shadow-Instance. So my question is, will i be able to successfully apply EhP4 on this system using SAINT and JSPM. I need to end up with a ERP 6.0 EhP4 + NW 7.01 ABAP+Java.
Possible?
Thx in advance
regards,
Markus

Hi Markus,
this is not supported by SAP, as of EHP4 you have to use the EHP Installer in 64 Bit environments.
Best regards,
Christian.

Smartform for production order

Hi *
We have currently SAP ECC6 EHP3 installed and I'm looking for a preconfigured smartform for the production order. I know we can import country specific best practice templates, but this is too much for only the need of one smartform.
Can anyone provide me the following data for the smartform "Production oder":
- print programm
- style
- smartform
Thanks a lot in advance for your help...
Regards
Juerg

Hi Karthik
Thanks for your reply, I already checked this before I posted this thread in this forum. We don't have such smartforms in our system. They will be imported with best practices packages.
Regards
Juerg

Why does instantClient x64 use 32 bit drivers?

Hi all,
I am trying to install ODBC on a win 7 x64 machine.
Following the instructions, I installed the instant client and instant ODBC. When I look in the registry (since it doesn't work) in the ODBC section, it lists the driver as "C:\OracleInstall\client\instantclient_11_2\SQORA32.dll"
Now why would the fine developers at Oracle name a 64bit version of a driver SQORA32.dll?????
Could this be part of the problem?
Thanks,
JustMe

Greg,
This was part of my trying to figure out why I couldn't get ODBC working - which is detailed in another thread (Windows 7 with 11g ODBC install confusion... Hence, no details here.
Thanks,
JustMe

Cprojects - IDES

Hi everyone,
We have IDES ECC 6.0 EHp3 installed...I tried to call cprojects URL from SE80>Webdynpro>DPR_mainframe>cprojects...but i always get IE cannot display the webpage...I browsed through several threads and learnt some services have to activated...when i checked the same in SICF all the services are already activated...pls help on this issue....I want to access cprojects...what else have to be done...

Hi
try adding entry of your domain in IE > TooLs > LAN SETTING > ADVANCED > Exceptions
e.g if your weblink is
http://forums.sdn.com:8080/sap/bc/webdynpro etc
then add http://forums.sdn.com*, in exceptions
If it doent work
also try to enter the entry in C:\WINDOWS\system32\drivers\etc
in Host file by opening the file in notepad
Entry should be like
127.0.0.1 <domain name without port>
for above example
127.0.0.1 forums.sdn.com
Niranjan
Let me know if it helps

Cannot Update a File.

I have purchased several new extensions recently and when I
install them through Extension Manager it errors out at the end of
the progress bar and states
"Cannot Update a File. Extension will not be installed."
I have Vista Ultimate running Dreamweaver CS3 and Dreamweaver
8. I read on some other forums that having both installed confuses
the Extension Manager so I removed Dreamweaver 8. Still the same
problem. I performed some file monitoring and noticed it was having
problems with a Menu.xml file located at
"C:\Users\root\AppData\Roaming\Adobe\Dreamweaver
9\Configuration\Menus\Menus.xml".
Anyone have these issues? Nothing I have found online which
resolves this for older versions worked.

I have updated the file in question on my development computer. I then saved it to a network drive. I then uploaded it to the ftp. Next, I went back to the Win 8.1 machine. I opened the ftp and copied the file. I then pasted
it to the desktop. I then opened the file and verified that it was not updated. I then accessed the network drive and copied the file, then pasted on the desktop. Voila! It was updated. Conclusion: Cannot copy and paste from ftp
(unless it had never been present) but can update from other source.
On the Win 8.1: Next, I reopened the ftp, copied the file. Returned to the desktop (which now contained the identical updated version copied from network drive). Pasted. Opened the file. Alas, it had reverted to the version
prior to copying from the network file. I next deleted the file, then downloaded from ftp again. The previous version reappeared! Conclusion: Anytime an update is attempted from ftp, the version reverts to something it finds in a cache somewhere.
I did try rebooting at this point, but the previous version was still there.
After a reboot of the Win 8.1 machine, I could copy and paste successfully from ftp to desktop.
You asked about the former system edition: Windows 7 on my development computer. I don't have an installation log, but I am not sure exactly to what you refer. Office 2010 Professional is the source software; MS Access 2010 Runtime is
the program used on the 8.1 computer. Note that this all works on users using Win 7 and the same Runtime.

EHP Update

Hello,
I want to install the Enhancement Package 4 (EHP4) on our ECC 6.0.
Where can I check the actual EHP version that is installed on the system? Or if even an EHP package is installed on the system? Is there an special transaction-code available? Because in "spam" and in the menu "System - State" I am not seeing anything about the EHP.
Regards,
Rainer

Hello,
The easiest way to decide which ECC EHP is installed on your ECC system is to check the release of the component SAP_APPL. If the version is 603, it means you have EHP3 installed. If it's 601, it means you have EHP1 installed. If it's 600, it means no EHP is installed.
Best Regards,
Joe

SCEM Info

Hello everyone,
I found Kevin's book at SAPPHIRE and raced through this on the way home. This is an exciting area for SAP but it seems to be kinda quiet. I've scoured ERP Genie and SAP's site and can't seem to get more info on training courses and additional examples. Maybe I'm lost in all the info on SDN.
Does anyone know of the course code for this on SAP training - is there any training offered? Since the SAP Press book on it comes out this month but in German, I am wondering if it is too new to have training on it just yet.
Any info to help get working on this would be appreciated. I've got a new ECC 6.0 EHP3 install, but following the book and info here I have not gotten very far in setting up examples. [edit] I just found the PDF overview showing EHP4 as a starting point for EM add-on - which may be why we're running into walls. Any additional info still welcome!
Thanks in advance
Edited by: Ed Beck on Aug 6, 2010 8:05 PM

Ed,
Glad you picked up a copy of the book. If you want to know my theory as to why SAP EM is not big just let me know.
Did you check the link [http://wiki.sdn.sap.com/wiki/display/SCM/SAPEventManagement] which has a link to blogs to configure an end to end SAP EM scenario:
u2022Configuring an End-to-End SAP EM scenario (1/3) - Scenario Description and General Config
u2022Configuring an End-to-End SAP EM scenario (2/3) - ECC Configuration and Development
u2022Configuring an End-to-End SAP EM scenario (3/3) - SCM Configuration and Development
These are still relevant in the ECC installation. Also check the one u2022SAP Event Management - Generic Extraction Application Interface which deals with the way you could extract data from ECC without doing the coding.
If you have any more questions or specifics just let us know.
Thanks
Kevin

EHP3 Instalation - confuse

Similar Messages

Maybe you are looking for