EHP4 Clarification

Hello Experts,
Enhancement Package 4 installtion -> SAP says two methods are possible.
Below are the must know document page 11 and 12.
4.2 New with SAP Enhancement Package 4: SAP Enhancement Package 1 for SAP NetWeaver
With SAP Enhancement Package 1 for SAP NetWeaver 7.0 and the SAP Enhancement Package 4 for SAP ERP 6.0 different installation options and system landscape alternatives are foreseen in terms of Java based system instances. The following product versions are available with the current enhancement package:
*Method1*. EHP 4 for SAP ERP 6.0
Here you use the functionality of SAP enhancement package 4 for SAP ERP with SAP NetWeaver 7.00 systems. Please note that the SAP ECC Server (ABAP) always requires SAP
NetWeaver 7.01 u2013 which should be installed in one step altogether with the requires support packages and the SAP ERP enhancement package 4 components.
*Method2*. EHP 4 for SAP ERP 6.0/ NW 7.01
Here you use the functionality of SAP enhancement package 4 for SAP ERP with SAP NetWeaver 7.01 systems (which equals SAP enhancement package 1 for SAP NetWeaver).
1.Please let us know which method is best for the customers.
2.Why sap says implement EHP4 in two methods?
Thanks
Edited by: Thirumalai Malai on Apr 22, 2009 6:25 AM

Hi Christian,
Thanks,
Method 1(Existing ERP - Rel-700) - > After the EHP4 installation result is -> 7.01
->Dual Stack
*Method 2 (New Installation EHP4 Ready) -
Method 2 I see that separate ABAP (EHP4 ready) and Java stack insallation. Hence we have to give separate SID for Abap and java stack. So its bit confusing for me. SO I can take it the difference is between both method is
Method 1 is Dual stack
Method 2 is Sepate abap stack Server and Java stack Server. SID is different .
1.I would like to know more what are the differnece between both methods. ?. Which one is best for the customers?
2.Apart from that . I have installed EHP3 In abap stack -> I see that (ERP 6.0) Basic support package and Business funtions in ABap stack. Via Maintanence optimizer i have downloand the s/w and applied Basic support package and IS_Retail business funtions(After Ehp3 instalaltion IS_Retail changed from rel 600 - rel 603 )
I could not Identify which one is the basic support package(Like JSPM) and which one is Business function in Java stack?
Thanks
Thirumal
Edited by: Thirumalai Malai on Apr 23, 2009 2:25 AM

Similar Messages

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)

Hi,
I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
It is not clear which option I have to choose in the SAPINST program.
In the past was present ERP2005 central instance. And now ?
Thank
Andrea

Hi Andrea,
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system
As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
Java Components in your system landscape, you have to proceed as follows:
1. Install a separate SAP ERP ABAP system.
2. Install a separate SAP ERP Java system.
3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
back-end system
Hope this clarifies your concern!!!
Regards,
Rajesh

Technical upgarde from ECC5 to ECC6 EHP4

Dear All,
We are having technical upgarde from ECC5 to ECC6 EHP4. I have have some queries as client what need to be check after upgarde.When golive cahke is done what are check list apar from system is up and running.
Please sugegst
Regards,
Kumar

SAP offers a pre-golive check before actual go-live by logging into your system and doing some important checks as per the requirement for technical or functional go-live check...
So, you want SAP to do pre-golive check, just open up the connection between SAP and your sap system, at the same time, a connection from Solman to SAP too..maintaining the connection details in secure area
You have to open a message in component XX-SER-TCC to find out if your installation is scheduled for a Go-Live check which is conducted by SAP and itu2019s partners.
Go-Live Functional Upgrade Analysis u2013 ideally 6 months before Golive u2013 basically checks your hardware requirement , will it be able to accommodate the increase in the functionalities caused by the Go-Live, also some parameter recommendations to fine-tune your system.
Go-Live Functional Upgrade Verification u2013 This is normally 2 months after the Go-live which is to see eu2019thing is fine after the upgrade.
Then you have normal Earlywatch session , each installation is entitled for 2 free earlywatch session in a year, in this performance tuning is done for your system, hardware,memory, I/0 bottlenecks are identified.
Reports of all these sessions carried out by SAP is then sent to you in form a MS-Word document and you can follow the guidelines mentioned and call up SAP or mail the person who has done the session for you for any clarifications.
Usually once a session is scheduled.
SAP will contact you to open the connections for them, so that they can prepare the system before the actual session takes place , in which they see , if SDCC version is good enough so that they can download the data from your system into their internal system on which they carry out the analysis
Refer to https://websmp208.sap-ag.de/earlywatch

Domain Guideance and Clarification using SVN and an Export suggestion

Hello Oracle SQL Data Modeler Support,
Apologies if this has been documented somehwere and I have missed reading it, but have gone through the User Guide and cannot find the clarification I want regarding domains.
1) WHAT IS BEST PRACTICE TO SAVE WHEN USING SVN
From the forum I have picked up that the domains file is in the following directory:
~\datamodeler\datamodeler\types
File name is 'defaultdomains.xml'
When I come to save the file using SVN I get 'Choose versioned folder for storing system types'
I assume this is where the domains file is stored.
I require the Domains to be avialable centrally to all Designs I create, what should I do?
a) Set the folder to ~\datamodeler\datamodeler\types
b) Create a design called 'Domains' and store it in this folder
c) Any thing you may suggest
2) EXPORT OF DOMAIN FILE SUGGESTION
This should be a quick win for you, can you please add an Export Domains function, seems this needs to do no more than make a copy of the defaultdomains.xml file and create it in a specified export directory.
Will avoid having to go through the forum to pick up that the defaultdomains.xml file needs to be copied and transfered over for new SQL Data Modeler installations.

Hello,
I require the Domains to be avialable centrally to all Designs I create, what should I do?Default location is fine if SVN is not used and if all designs are used only on that computer.
If versioning is used then it's better to have separate directory for domains and this directory shouldn't be part of any design's directory - i.e. for designs you can have directories c:\des_1, c:\des_2 ...c:\des_n - one directory per each design and that directory will contain design DMD file and design folder. For domains you can have directory c:\DM_Sys_types and you need to set this directory in "Tools>Preferences>Data Modeler>system types directory" - logical types, RDBMS sites and scripts also will be stored there.
Philip

Problem in automatic PO creation after EHP4 upgrade

Hi experts,
We upgraded our system from ECC6.0 to ehp4. When I am trying to use ME59n to create a PO automatically from a PR, I get a dump "Please maintain services or limits". Item category used is either 'B' or 'D'. The same was working fine earlier in ECC6. Could someone help me as to what could be the issue?
Regards,
Hema

Lakshman has explained
you need to have the source list setup (make sure info record exist) or contract is exist and it is assgned to the source list
but as per your email the source is determined in the PR that means source are setup properly
now check the variant of your back ground program of AutoPO
if the variant is not matching with your PR's than it will not creates the PO
so create few PR's and test it with ME59N with the background job variant and see how it is going
some time in the variant let say you have setup the release date but if it is not matching with PR release date than it will not create the PO
so in short you need to test same varinat online than setup for back ground.

EHP4 Upgrade ABAP+JAVA stack

Hi SDN Team,
We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
Trouble Ticket Log
===============
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SE1
Hostname...........: NA00SAPSAND02
Install directory..: g:/usr/sap/SE1
Upgrade directory..: G:\EHPI\EHPI\java
Database...........: Microsoft SQL Server
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
We have added the system in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
PREPARE_JSPM_QUEUE_CSZ_02
===========================
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
Jul 27, 2010 3:48:22 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Not sure what to do now.please advise.
Regards
Uday

Hi Uday,
> Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Info]:                      >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
> Jul 27, 2010 3:48:22 AM [Error]:                       >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
I can see in the log that stack xml you are using is not for the system to whom you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
Thanks
Sunny

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION

Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
Javier

Hi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier

Error while applying EHP4 to ERP6.0-phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!

while i was applying EHP4 to my ERP6.0 system using Enhancement Package Installer i got the following error in the Downtime roadmap:
Severe error(s) occured in phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!
Last error code set: RFC_ERROR 2: DUMP_ERROR
i checked the RSUPGBWD.LOG and here is what i found:
1 ETQ201 Entering upgrade-phase "JOB_BATCHCHECK_XPRA" ("20110503131506")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_BATCHCHECK_XPRA'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSUPGBWD'
2 ETQ399 Arg[1] = ''
2 ETQ399 Arg[2] = 'IGNORE'
2 ETQ399 Arg[3] = 'RSUPGBWD\.$(SAPSID)'
2 ETQ399 Arg[4] = '3'
2 ETQ399 Arg[5] = 'Batch execution checker'
2 ETQ399 Arg[6] = 'RSUPGBWD.ELG'
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ010 Date & Time: 20110503131506
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
5 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
i also check ST22 for the error and i found this:
Runtime Errors         CALL_FUNCTION_CO
Date and Time          03.05.2011 13:15
Short text
     RFC error when sending logon data.
What happened?
    An error occurred when executing a Remote Function Call.
What can you do?
    Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred when executing a Remote Function Call.
    Status of connection.... "-"
    Internal error code.... "-"
How to correct the error
So any clue with that error?

Hello Waseem,
I would recommend to update to the latest disp+work but also check in sm21 and find the work process that encountered the error. Then see in the corresponding work process trace file dev_w* for the real error that occured.
e.g. If you see ERROR => RFC Signon> Failure in ab_MakeTicketSndExternal calling
check note 1532825
and the report RS_TT_CLEANUP_SECSTORE
Regards,
Paul

Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PM

Hello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony

BI Java Installation: Clarification Needed!

I'm wondering if someone could help clear this up for me:
We have installed NW2004s SPS08 on Solaris with only the usage type EP (AS Java/EP). Awhile back I was tasked with connecting our BW ABAP system to our Portal ("Integration into the Portal" - transaction SPRO etc).
After starting this task I noticed I was missing things that the instructions were telling me to configure; i.e. Items that were related to BI that weren't in the Portal such as certain roles, the BI Repository Manager etc.
Reading around, it seemed like I need to install the BI usage type.
I have now been tasked with another installation of the Portal (NW2004s SR1 this time), but am trying to head off the problems I'm experiencing trying to connect the Portal to our BW ABAP system. This will be a Java only installation. I've read that BI-Java requires EP and AS Java, and that if I install the BI-Java usage type, EP and AS-Java will be installed automatically.
My question is, if I do the BI-Java installation and it automatically installs EP/AS-Java, will the Portal still act the same way as it does in my EP/AS-Java only installation I already have? We have many plans to use the Portal as an entry point for all of our backend systems, so if the Portal's capabilities are not what we see already (in our first installation of just EP/AS-Java) then we will have problems.
Any clarification is greatly appreciated and I will award points accordingly.
THANKS!
Beau.

I think that's what I needed to know.
I was actually wondering about DI as well. Our developers are having problems deploying .EAR files to our original EP-only install. They can deploy .PAR files with no problems, but .EAR files always error out. Maybe having DI will solve this problem as well? I'm a little concerned about the hardware capacity of this box with having BI, EP and DI all installed on it. I had contacted SAP about installing DI a while back and basically they had told me to install it on a seperate server, by itself. We're running a Sun Enterprise 420R, 4G of memory and a 450 mhz processor for this new installation. Do you think this box is capable of handle EP, BI and DI (AS-JAVA)?
Thanks for your help!

Create SSO on SAP portal to ECC 6.0 EHP4 backend

Hello,
I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security Provider --> Ticket.
Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
I attach a screen shot from Visual administrator.
Kind regards,
Richard Meijn
Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

Cahtal,
Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
If I write something wrong please correct me. I understand the following
So If I am on the "Authentication" tab I press the Add new button
In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
Kind regards,
Richard Meijn

Clarifications in Asset Accounting

Dear Experts,
Please clarify below questions.
1) What is the difference between Depreciation Area and Depreciation Key?
2) What is the importance of Recalculate value button in Asset Accounting?
3) Suppose I have 1000 assets, if I want to run depreciation only for 200 assets how can I do that?
4) If suppose I have 5 Depreciation areas, I am able to see the book depreciation values only, where I
can see the other depreciation values? If we cant see for which purpose we are using other
depreciation areas?
5) Vendor and Customer balances get update regularly or once in a month or year?
6) Where we have to create number ranges either in Production or Development Environment?
7) How can we transfer GLs from one environment to another?
Full points will be assigned as way of thanks
Regards,
Vineela

Hi Krishna,
Thanks for your reply,But still I need some more clarifications please respond........
2) What is the importance of Recalculate value button in Asset Accounting?-
(A)recalculates depr when asset parameters are changed
Where it will be there as it(recalculate button) is not there in AFAB
3) Suppose I have 1000 assets, if I want to run depreciation only for 200 assets how can I do that?
(A)select those 200 and run depreciation
Here Assets Selection option is there only in test run not there in update run.
4) If suppose I have 5 Depreciation areas, I am able to see the book depreciation values only, where I can see the other depreciation values? If we cant see for which purpose we are using other depreciation areas? (A)use AW01N- you cans ee all dep areas
In AW01N only book depreciation values is displayed,how can I see other depreciation area values
Regards
Vineela
Edited by: Vineela Siri on Apr 9, 2008 7:22 AM

Query regarding HRP table updation in EHP4

Hello Experts,
Recently we have upgraded our system to EHP4 and we have done data migration of the E-Recruitment to Career Profile (eg. data migration from HRP9301 to HRP7402 infotype).
The infotype HRP7402 has a field called TABNR at the last and there is an include provided where we have included 2 more essential fields.
But when i am updating the HRP7402 (internal table has the correct data), this TABNR (length 32) is getting filled in the infotype automatically which is fine but it is having leading spaces because of which the remaining 5 characters are being moved the other 2 fields (the fields which are included in the include provided) after this field.
The same TABNR is getting populated perfectly in other infotypes where it is the last field and there are no additonal enhancements done in the standard include provided.
Please let me know on how can i resolve this problem of leading spaces which are automatically getting added up. And I am not clear on where this TABNR is getting filled up in the FM. The following is the code snippet....
        CALL FUNCTION 'RH_INSERT_INFTY'
          EXPORTING
            fcode               = 'INSE'
            vtask               = 'D'
            order_flg           = 'X'
            commit_flg          = 'X'
            authy               = 'X'
            repid               = sy-repid
            form                = 'FILL_DATA'
          TABLES
            innnn               = it_p7402
FORM fill_data TABLES ct_tabinfty_tab
USING ct_infty TYPE any
        ct_tabix TYPE any.
CLEAR ct_tabinfty_tab. REFRESH ct_tabinfty_tab.
ct_tabinfty_tab = ' '.
APPEND ct_tabinfty_tab.
ENDFORM.
Thanks
Raj Kishore

Sorry to intervene here Dhina but that is just halfways correct.
If delivery class NOT = C then it is NOT a customizing table and therefore you wont get any transport request updating or deleting data from it.
But if it is a customizing table then you got to look for the recording routine. You can see this by viewing your table in SE11, then using the menu like following:
utilities->table maintainance generator.
Then look at the info in the bottowm frame. if "standard recording routine" is tagged, then you get a transport request.
If the other option is tagged you wont get it. What again means you can customize this table directly in the system where you need those entries.
why is that?
well assume there is a customizing for e.G. materials, depending on materialnumber. If that table would have a standard recording routine you would need ALL your materials in your development system which would be quite unusual.
Edited by: Florian Kemmer on Jun 9, 2011 2:00 PM
some typos corrected, left some for sure

EHP4 Clarification

Similar Messages

Maybe you are looking for