EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

Hi!
I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgen

Hi,
Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
Thanx,
SBS Administrator.

Similar Messages

EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG

Hi!
I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgen

Hi
Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
Best regards
Mischa

EHP5 Installation: Error in Phase PREP_INPUT/KX_CPYORG

Hi there,
happy new to year to all of you
I have a problem with the EHPI (latest version). In Phase "PREP_INPUT/KX_CPYORG" i get the following error:
KX_CPYORG.LOG:
1 ETQ200 Executing actual phase 'PREP_INPUT/KX_CPYORG'.
1 ETQ399 Source directory: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
1 ETQ399 optional list file 'dbclient.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'igsexe.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'sapcrypto.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 Using copy list: instance.lst
1 ETQ399 Using copy list: instancedb.lst
1 ETQ399 Copying files from 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' to 'D:\usr\sap\EHPI\abap\exe'
2 ETQ399 Reading list file 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64\instance.lst'
The problem here is its an unicode System - ever was! and there is no path D:\usr\sap\BIL\SYS\exe\ nuc \NTAMD64 but a D:\usr\sap\BIL\SYS\exe\ uc \NTAMD64
The Systems' profile parameter OS_UNICODE says: "uc". DIR_CT_RUN says "D:\usr\sap\BIL\SYS\exe\uc\NTAMD64"
So why does the EHPI think this is a Non-Unicode system?
Any ideas?
regards,
Markus

When i check the files "BIL_DVEBMGS00_BILBO.PPR" and "START_DVEBMGS00_BILBO.PPR" from the EHPI directory D:\usr\sap\EHPI\abap\log\ i do find entries like
2 DIR_CT_RUN User: SAP: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
and
2 OS_UNICODE User: SAP: nuc
But the question remains. Where does it take these ones from? The System profiles do not refer to "nuc" anywhere but always to "uc".

Severe error(s) occured in phase PREP_INPUT/KX_CPYORG!

We are installing the EHP4 on a ERP 6.0 EHP4 ready ABAP system. ( MSCS
Installation)
We are using SAP EHP INSTALLER 7.00 .( latest version)
However , while in extraction phase we are getting following
error "evere error(s) occured in phase PREP_INPUT/KX_CPYORG!
Last error code set: Failed to copy 1 files, check 'KX_CPYORG.LOG' for
details"
We have checked that user SIDADM user has full rights over the
directory "
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64"
Please advice where to look for errors and how to resolve them. Just an information i DID NOT stopped any services on both of nodes , as its an MSCS installation and i am running ehpi tool at server on which CI was installed and running the tool from CI /usr/sap/sid/ehpi directory.
There is no error in KX_CPYORG.log file .
2 ETQ399 Reading list file '
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64\dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'dbatoolsora.mf'.
3 ETQ399 Copying file 'brarchive.exe'.
3 ETQ399 Copying file 'brbackup.exe'.
3 ETQ399 Copying file 'brconnect.exe'.
3 ETQ399 Copying file 'brrecover.exe'.
3 ETQ399 Copying file 'brrestore.exe'.
3 ETQ399 Copying file 'brspace.exe'.
3 ETQ399 Copying file 'brtools.exe'.
3 ETQ399 Copying file 'libsbt.dll'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'ntenv2reg.exe'.
3 ETQ399 Copying file 'ARCHIVE_OFF.BAT'.
3 ETQ399 Copying file 'ARCHIVE_ON.BAT'.
3 ETQ399 Copying file 'ARCHIVE_TST.BAT'.
3 ETQ399 Copying file 'strdbs.cmd'.
3 ETQ399 Copying file 'CPIO.EXE'.
3 ETQ399 Copying file 'DD.EXE'.
3 ETQ399 Copying file 'MT.EXE'.
3 ETQ399 Copying file 'MKSZIP.EXE'.
3 ETQ399 Copying file 'UNCOMPRESS.EXE'.
1 ETQ399 Copied 915 files.
1EETQ399 Failed to copy 1 files.
Please advice
Regards
Edited by: Tech GCCIA on Oct 14, 2010 1:52 PM

In my case, it cannot overwrite some files, i could found it in the log.
See :
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicudata50.a': Text file busy
3 ETQ399 Copying file 'libicui18n40.a'.
3 ETQ399 Copying file 'libicui18n50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicui18n50.a': Text file busy
3 ETQ399 Copying file 'libicuuc40.a'.
3 ETQ399 Copying file 'libicuuc50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicuuc50.a': Text file busy
I've just renamed these files for _bkp and runned again.
It works!
Thanks and I hope help you !!!
regards,
Eddie

EHP6 - Severe error(s) occurred in phase PREP_INPUT/KX_CPYORG!

Hi All,
We are at the "extraction" stage of our EHP6 upgrade for pre-prod system, this serves as rehearsal for the execution of the same upgrade in production system.
However, SUM is stopped due to below error.
SUM - EXTRACTION phase stops at PREP_INPUT/KX_CPYORG, showing the error message below:
Severe error occurred in phase PREP_INPUT/KX_CPYORG!
Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
And checking from log, it shows "4EETQ399 Source file 'exe_syb.lst' missing!". This file doesn't exist anywhere in the system. Also, checking from logs of previous EHP6 upgrade in our DEV and QAS systems, this file doesn't exist. And instead of "exe_syb.lst", what has been copied from previous upgrades is 'exe_db6.lst'. We are at HP-UX and DB6.
Logs:
4EETQ399 Source file 'exe_syb.lst' missing!
1 ETQ399 Copied 821 files.
1EETQ399 Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
1EETQ204 Upgrade phase "KX_CPYORG" aborted with severe errors ("20140721180154")
Please advise how to fix.
Regards,
Philip

HI,
Kindly share 'KX_CPYORG.LOG files for analysis.Meanwhile try to patch the kernel with latest available at SMP and recheck for permissions and ownerships under kernel directory.
Regards,
Gaurav

Error during the PREP_INPUT/KX_CPYORG in the EXTRACTION roadmap step

Dear Gurus,
We are on SUSELinux 10 SP2
Oracle 10.4 and
I am in the process of applying EhP4 on top of my ECC 6.0 SR3 server and i m in the Extraction roadmap step and at a phase PREP_INPUT/KX_CPYORG which gives me the following error
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG! on my SAPEhPGUi screen and no log gives a clear explaination of this error, i have checked the log KX_CPYORG.LOG and it is as below
======================================================================================================
2 ETQ399 Reading list file '/usr/sap/KDV/SYS/exe/run/dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'brarchive'.
3 ETQ399 Copying file 'brbackup'.
3 ETQ399 Copying file 'brconnect'.
3 ETQ399 Copying file 'brrecover'.
3 ETQ399 Copying file 'brrestore'.
3 ETQ399 Copying file 'brspace'.
3 ETQ399 Copying file 'brtools'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'libsbt.so'.
1 ETQ399 Copied 784 files.
1 ETQ399 Failed to copy 1 files.
But doesnt say which file..
======================================================================================================
Apart from that i have also checked the log file SAPehpichk.log, which is as below
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20091004010834
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from /usr/sap/KDV/SYS/exe/run.
...begin dialogue at 20091004010846
======================================================================================================
i have also checked the files and the size of the /usr/sap/KDV/SYS/exe and /ehp4/EhPInstaller/EHPI/abap/exe folders and they look alike and no size difference among them.
Can anyone please help me come out of this situation.
I have re-run the Phase (repeated) many a times with no luck.
Awaiting any inputs on the same,
Million thanks in advance,
Baso

Dear All,
The issue is resolved and i did the following
1) Cancelled the Ehp4 installation
2) Deleted EHPI directory
3) Downloaded latest EhPI (which is released on 1 Oct)
4) Restarted the EhP4 installation
5) Changed the icmbnd file permissions in the source directory to 777 and owner to SIDadm
6) Copied it manually with the same permissions into the target exe directory (ehp4/EHPI/abap/exe)
7) After the phase reset the file permissions back to original in the source directory (/usr/sap/SID/SYS/exe/run)
Only one good suggestion is download the latest EhP installer
Hope this helps
Thanks to all
Regards
Hunky

EHP4 Installation error-CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT.

Hi Folks,
We are doing an EHP4 installation and stuck at the phase SCANDIR_EXTRACT.
Below is the log:
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20100408034401
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Error message CPF0006 running 'LODSAPKRN DEV(STMF) MNTPNT(UPG '/ehp4/ehpi/abap/exenew') KRNLIB(SAPQAS70U2) APYR3KRN(NO) USERDEF(NO) ONESTEP(*NO) STATFILE('/ehp4/ehpi/abap/log/SAPQAS70U2.LOG')'.
...begin dialogue at 20100408034515
Please help me with the problem. Thanks in advace.
Regards,
Bhavnesh

Hi,
I think there is a issue with this on IBM i check the thread :
Upgrade from 470 to SAP ECC 6.0 Ehp4 Sr5 (non unicode)
Mark

SAP ECC IDES EHP4 Installation Error

Dear Friends,
I am installing SAP IDES EHP4 on Windows 2003 64 bit Server and Oracle 10g(10.2.0.4).
The installation is in phase IMPORT-ABAP, it is giving the error as below.
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Loading of 'REPOSRC' import package: ERROR
Loading of 'PCL2' import package: ERROR
Loading of 'DOKCLU' import package: ERROR
Loading of 'SAPAPPL2_2' import package: ERROR
Loading of 'PCL4' import package: ERROR
Loading of 'VRSMODISRC' import package: ERROR
Loading of 'SAPSSEXC_2' import package: ERROR
Loading of 'AGR_HIERT' import package: ERROR
Loading of 'REPOTEXT' import package: ERROR
Loading of 'SOC3' import package: ERROR
Loading of 'SAPAPPL1_10' import package: ERROR
Loading of 'SAPAPPL1_7' import package: ERROR
Loading of 'RSMPTEXTS' import package: ERROR
Loading of 'DD04T' import package: ERROR
Loading of 'SAPCLUST' import package: ERROR
Loading of 'SAPSDIC_1' import package: ERROR
Loading of 'T100' import package: ERROR
Loading of 'SAPAPPL2_3' import package: ERROR
Loading of 'RFBLG' import package: ERROR
Loading of 'SAPNTAB' import package: ERROR
Loading of 'SAPSLEXC' import package: ERROR
Loading of 'VRSX' import package: ERROR
Loading of 'SAPAPPL0_2' import package: ERROR
Loading of 'SAPAPPL1_2' import package: ERROR
Loading of 'SAPSSEXC_3' import package: ERROR
Loading of 'SAPSSRC' import package: ERROR
Loading of 'SAPAPPL1_8' import package: ERROR
Loading of 'E071K' import package: ERROR
Loading of 'SAPAPPL0_3' import package: ERROR
Loading of 'SAPAPPL1_4' import package: ERROR
Loading of 'SAPAPPL1_5' import package: ERROR
Loading of 'SAPAPPL0_6' import package: ERROR
Loading of 'SAPAPPL2_6' import package: ERROR
Loading of 'D021T' import package: ERROR
Loading of 'SEOCOMPODF' import package: ERROR
Loading of 'SAPAPPL0_8' import package: ERROR
Loading of 'STERM_TEXT' import package: ERROR
Loading of 'DD03L' import package: ERROR
Loading of 'ARFCSDATA' import package: ERROR
Loading of 'SAPSDIC_2' import package: ERROR
Loading of 'SAPAPPL1_12' import package: ERROR
Loading of 'SAPAPPL2_7' import package: ERROR
Loading of 'SAPSSEXC_1' import package: ERROR
Loading of 'SAPAPPL2_8' import package: ERROR
Loading of 'SAPAPPL0_4' import package: ERROR
Loading of 'SOTR_TEXT' import package: ERROR
Loading of 'SAPAPPL2_9' import package: ERROR
Loading of 'SAPAPPL1_1' import package: ERROR
Loading of 'SAPAPPL1_3' import package: ERROR
Loading of 'FUNCT' import package: ERROR
Loading of 'ATAB' import package: ERROR
Loading of 'DD02T' import package: ERROR
Loading of 'SAPAPPL2_1' import package: ERROR
Loading of 'E071' import package: ERROR
Loading of 'SAPAPPL2_5' import package: ERROR
Loading of 'SAPAPPL1_11' import package: ERROR
Loading of 'SAPAPPL0_1' import package: ERROR
Loading of 'INDTEXT' import package: ERROR
Loading of 'SEOSUBCOTX' import package: ERROR
Loading of 'SAPAPPL2_4' import package: ERROR
Loading of 'SAPAPPL0_9' import package: ERROR
Loading of 'SAPAPPL1_9' import package: ERROR
Loading of 'SAPAPPL0_5' import package: ERROR
Loading of 'OCSCMPLOBJ' import package: ERROR
Loading of 'GLFUNCA' import package: ERROR
Loading of 'SAPAPPL1_6' import package: ERROR
Loading of 'SAPAPPL0_7' import package: ERROR
Loading of 'USRBF2' import package: ERROR
Loading of 'DDFTX' import package: ERROR
Loading of 'SAPSSEXC_4' import package: ERROR
Loading of 'PPOIX' import package: ERROR
Loading of 'SCPRSVALS' import package: ERROR
Loading of 'SCPRSVALL' import package: ERROR
Loading of 'SEOCOMPOTX' import package: ERROR
Loading of 'DD07T' import package: ERROR
Loading of 'TRDIRT' import package: ERROR
Loading of 'SEOSUBCODF' import package: ERROR
Loading of 'TMENU01T' import package: ERROR
Loading of 'WBCROSSGT' import package: ERROR
Loading of 'TODIR' import package: ERROR
Loading of 'FUPARAREF' import package: ERROR
Loading of 'FAGLFLEXA' import package: ERROR
Loading of 'SCPRVALS' import package: ERROR
Loading of 'DOKHL' import package: ERROR
Loading of 'TADIR' import package: ERROR
Loading of 'DOKIL' import package: ERROR
Loading of 'DSYS_PHFILE_ECD2' import package: ERROR
Regards
Ganesh Datt Tiwari

Hi friends,
now the error is comming as below.
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/ISDFPS/V_BI_TGT")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/ISDFPS/V_BI_TGT" ( "OTYPE" , "TASK" , "LANGU" , "SHORT" , "STEXT" ) AS SELECT T0001."OTYPE", T0001."OBJID", T0001."LANGU", T0001."SHORT", T0001."STEXT" FROM "HRS1000" T0001 WHERE ( T0001."OTYPE" = 'TS' OR T0001."OTYPE" = 'WS' OR T0001."OTYPE" = 'TG' ))
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20111116181302
regards
Ganesh Datt Tiwari

EHP4 installation error

Hi everybody.
We are running an EHP4 installation in ECC 6.0 using EHPI installer.
At pre-proccesing phase, when installation is activating abap objects we receive an error because it is not possible to connect sap gateway of service sapgw11 (11 is the number of the shadow instance)
We are looking for procceses and there is no one running for shadow intance.
On this way, we are sure that shadows instance must be started, but we are not able to start it.
When we try to do it, we receive this error:
(13752) Starting: local ms.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13753) Starting: local dw.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13733) Waiting for Child Processes to terminate.
(13733) **** 2009/05/19 19:57:30 Child 13753 terminated with Status 1 .
(13753) **** 2009/05/19 19:57:30 No RestartProgram command for program
2 ****
Instance on host tu1v1ecc started
We can't start shadow instance so installation is stopped.
If anybody knows how to start it, will be great.
Thanks a lot in advance to everybody.
Best regards.

Hi Daniela,
In order to start the shadow instance, please follow below steps
1) Shutdown the CI .
2) The used cleanipc command to clear all semaphores for both shadow instance and CI.
3) Start your CI.
4) go to your upgrade directory (<path-EHPI/abap/bin>).Use below command to start shadow instance
startsap_shd -t R3 -i <Shados instance name> -r <root directory for upgrade> -u <Shadow instance owner>
Please also check in logs if some file (e.g .sapstream file) is in used for in /tmp directory for shadow instance. If it is in use the rename it. and start.
If still phase problem then please let me know.
Thanks
Sunny

EHP4 upgrade: Error in Phase ACT_UPG

Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order     : "SAPK-604DMINISPSCA"
1 ETP102 system              : "RH4"
1 ETP108 tp path             : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time   : "20091012033215"
1 ETP111 exit code           : "12"
1 ETP111 exit code           : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started                                                               00           516          S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)      00           550          S
2.10.2009 01:26:08 Start of mass activation 01:26:08                                         AD           010          S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c   12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22                         <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c   15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c   15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh Ramagowni

Hi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R

ERROR in phase PREP_INPUT/SCANDIR_EXTRACT

i am upgrading my sap system to ehp4, in PREP_INPUT/SCANDIR_EXTRACT phase , an error occurred , it says " no entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT.
checked the log files
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303145435
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
...begin dialogue at 20110303145816
...end dialogue at 20110303150425
..answered at 20110303150425.
-> decided to try again.
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303150425
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
...begin dialogue at 20110303150807
2 ETQ399 Field DELI_DATE is '20081001'.
2 ETQ399 Field DELI_TIME is '092652'.
2 ETQ399 File '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' determined as 'COMPONENT=EA-APPL,COMP_REL=603,EPSSUBJECT=EA-APPL===603,PATCH_TYPE=ACP,TO_REL=0002,type=PATFILE'.
3 ETQ399 Entry for file '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' was updated.
1 ETQ399 Scanning PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT':
2WETQ399 Unrecognized PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT'!
2WETQ399 File '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT' could not be recognized!
please help..

Hi
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
Check space in EPSINBOX
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
Check that all files .SAR and .CAR is uncar in EPSINBOX, uncar any file manually that not found in EPSINBOX and try again phase.
Other option is that restart EHPI and ensure that all package .SAR and .CAR is in download directory and that this files are OK.
Kind Regards
William Neira

TREX Installation, Error in phase - Install TREX web resources and finalize

Hello,
Platforms:
SO - Win 2008 (R2) X64
During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
I searched for this error and I found the following SDN forum:
SAPNW EHP1 SR1
I already press the retry button but it always show me the same error.
During this phase the SAPInst window show some information and in there I see this two:
creating sap start service of instance TSM/TRX02...
service not correcttly installed.
It is very weird thing!
I will post some log files such as sapstartsrv.exe and sapinst.log.
sapstartsrv.exe:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed
sapinst.log:
INFO 2012-01-20 16:29:24.446
Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
INFO 2012-01-20 16:29:24.457
Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
WARNING 2012-01-20 16:31:41.182
Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed.
ERROR 2012-01-20 16:31:41.380
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.381
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.470
FCO-00011 The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
Can you help me please, how can I solve this?
Kind regards,
JDimas

Hello Arjun Venkateswarlu,
1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
- As I said the windows firewall is disable (OFF)
2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
- All the created users during this installation belongs to local admins. This isn´t a domain installation!
3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
- I already did that... but it continues to show me the same error!
Any other tip?
Kind regards,
JDimas

DB6 Installation - error on phase VIEW (CREATE VIEW "/BEV1/LAVMVA1_V)

Dear all,
I install LNX X86_64, DB6 - ERP 6.0 EHP4, during phase IMPORT ABAP I've got error in SAPVIEW.log:
usr/sap/SID/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/SID/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Dec 25 2009 23:46:01
/usr/sap/SID/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP VIEW "/BEV1/LAVMVA1_V" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "/BEV1/LAVMVA1_V" ( "MANDT", "BSTNK", "VKORG", "VTWEG", "SPART", "VKBUR", "VKGRP", "KUNNR", "ERNAM", "BSTDK", "AUART", "VBELN" ) AS SELECT T0001."MANDT", T0001."BSTNK", T0001."VKORG", T0001."VTWEG", T0001."SPART", T0001."VKBUR", T0001."VKGRP", T0001."KUNNR", T0001."ERNAM", T0001."BSTDK", T0001."AUART", T0002."VBELN" FROM "VBAK" T0001, "VBUK" T0002 WHERE T0002."MANDT" = T0001."MANDT" AND T0002."VBELN" = T0001."VBELN" AND ( T0002."VBOBJ" = 'A' OR T0002."VBOBJ" = 'L' ) )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/SID/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SID/SYS/exe/run/R3load: END OF LOG: 20100119153412
I have changed R3load, sapinst to newest version, space is enough, tablespaces are not full.
Do you have any idea what is cause of error and how to solve it?
Any help is appreciated.
Regards,
Roman

Hi Frank,
thanks for your very fast hints.
I have checked .log files SAPxxxx.log (SAP0000, SAPAPPL0, SAPAPPL1, ...) but there isnt any entry with VBAK.
When I entered under <sid>adm command: db2 describe table sap<sid>.VBAK it takes a long time wihtout any result.
Thanks a lot for your help.
Roman
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM

ECC5 installation error during phase "Create Database"

We are installing ECC5 on IA64 using Oracle 9207.
At phase 'Create database' the sapinst aborts reporting errors executing the oradim -NEW SID command.
The oradim.log contains one row only : "DIM-00019: error creating service".
The OracleServiceSID is created, but it does not start.
If we try to run manually the command "Oracle.exe SID", so the same command that is started by the OracleServiceSID service a popup appear saying:
"The entry point kdr9ir2_pop could not be located in the dynamic link library oracle oracommon9.dll"
Any idea ? Are there problems with the oracle 920 sw installation or what ?
regards

Hi,
Sounds like oracle problem.
- Please post the last few error statement from sapinst_dev.log.
- Check if the the following key is in the registry:
HKEY_LOCAL_MACHINE\system\currentcontrolset\services\OracleService
- check oracle alert<SID>.log, see if there is any significant errors.
- see note #602843
- if "DIM-00019: error creating service", does it mean that an Oracle service with the same SID already exist? if so, use command "sc delete [service name]" to delete the service and then restart the installation.
Hope this helps.
cheers,
Vincent

Installation Error: ImportABAP Phase

Hello,
I am installing Nerweaver 2004s SR2 in my Desktop, I got following error in middle.
OS:windows 2003 server
DB: Oracle 10g
SAP: Netweaver 2004s SR2
When Installation is going on ( Phase No: 19, ImportABAP) unexpected power got shutdown my system . Again i started the installation " Old Intsallation" i got the following error:
                                                                      Error in SAPInst:
ERROR 2009-08-12 17:03:11
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-08-12 17:03:11
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
                                                                 Error in import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 14, failed 0, total 19.
Import Monitor jobs: running 2, waiting 3, completed 14, failed 0, total 19.
Import Monitor jobs: running 3, waiting 2, completed 14, failed 0, total 19.
Import Monitor jobs: running 4, waiting 1, completed 14, failed 0, total 19.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 14, failed 2, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 14, failed 3, total 19.
Import Monitor jobs: running 1, waiting 1, completed 14, failed 3, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 14, failed 4, total 19.
                                                                                Error in import_monitor.log
ERROR: 2009-08-12 16:12:37 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Please give me the Solution for this.
Regards,
Sanjeeva
*<subjectmodified>*_
Edited by: Juan Reyes on Aug 12, 2009 1:22 PM

Hi,
My installation stopped over there.
SAPAPPL0.log History:
:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090826054453
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090826061014
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090826061016
Can you fix my issue?
Thanks in advance
Regards,
sanjeeva

EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

Similar Messages

Maybe you are looking for