EHp4 installation - IS_SELECT phase error (MRSS_NW)

Hello everybody,
MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
Any ideas? Thanks!
Jessica.

Similar Messages

EHP4 installation using EHPI : Error message: DDIC password does not work:

Dear All,
We are upgrating enhancement packages 4 using EHPI in 64 bit server. I am facing this error in Extraction phase , I have to provide DDIC / SAPServiceSID/ DB specific , next says ddic password is not correct. But when i tried to login with the same password into 000 client, it works. But when through EHPI , it throws error. Kidnly check the error and please suggest me ... Thanks in advance..
Error message: DDIC password does not work: RFC call to failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM DEST=R3D, GWHOST=SAPRBSBD-01, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner 'SAPRBSBD-01:3300' not reached TIME Thu Dec 24 12:27:13 200 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: 192.168.1.40:3300 SYSTEM CALL connect ERRNO 10051 ERRNO TEXT WSAENETUNREACH: Network is unreachabl.
Regards
Raj

Dear Rajeev,
DDIC pwd for 001 is not same as 001,Will that be a problem ? But the Extraction requests for DDIC 000 client password. Are you sure UME comes into this scenario ?
@ Raghu - I have checked the link and it speaks about the resetting the EHPI. I dont want to reset and want to solve ddic password error.
Sorry if am wrong
@ Gerard,
Yes the hostname is SAPRBSBD-01.I am able telnet the IP 3300 and it works fine. FQDN SAPRBSBD-01.chen.local. The smicm service entries are with SAPRBSBD-01 but not with FQDN. Changing it to FQDN will help us to resolve the issue. Please suggest me.
Also the error refers to some RFC connection, any idea on that.
Thanks to all and looking for your valuable suggestions.
Raj

EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

Hi!
I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgen

Hi,
Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
Thanx,
SBS Administrator.

EhP4 installation ABAP+Java addin. XPRAS Errors in SAPR-603DWINEARETAIL

Chaps,
I am in the downtime phase of this EhP4 installation and the Java is running fine. I am getting this error with the ABAP in file XPRASUPG.ELG:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-603DWINEARETAIL.PDS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A3EEFDT_TRANSPORT 125 BRF+: <<< *** BEGIN: Content from Application Component "LO-MD-MM" *** >>>
A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ") &1"Function RS_PROCESS_PRICAT_K003" >>>
A3EEFDT_CORE 065 Name "RS_PROCESS_PRICAT_K003" has already been used
A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ") &1"Function RS_PROCESS_PRICAT_K003" >>>
A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ") &1"Function RS_MAP_CIN_TO_PRICAT" >>>
A3EEFDT_CORE 065 Name "RS_MAP_CIN_TO_PRICAT" has already been used
A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ") &1"Function RS_MAP_CIN_TO_PRICAT" >>>
A3EEFDT_TRANSPORT 126 BRF+: <<< *** END : Content from Application Component "LO-MD-MM" *** >>>
A3EEFDT_TRANSPORT 034 BRF+: Object activation failed (step: "Check" )
2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT" for "FDT0001" "T"
Any suggestions?
Regards,
Graham

Hi,
In the end I ran out of patience and decided to ignore the error to get it through to the end. Later, SAP responded as follows:
"The issue depends on a deleted function and a new function with the samename within one application. With note 1263261 the problem should be
solved. Maybe you also have to install note 1301695 after it."
I hope this helps,
Regards,
Graham

Error in CONFLICT_CHECK during EHP4 Installation

I have installed a new ERP system from the installation DVDs for ERP 6.0 EHP4 Ready. As part of the post-installations I am installing EHP4.
I have installed the newest SPAM 7.01/39 (and Basis-SPs SAPKB70104-SAPKB70106, ...)
I generated a stackfile in solman with target stack and added only Patch 21 for HR and EA-HR in phase BIND_PATCH.
During phase CONFLICT_CHECK I get:
ERROR> Conflicts found.
      Check log file 'SPDA_CONFLCHK.LOG' for details.
       To resolve the conflicts the current step will be repeated and you must change your Add-on or Support Package selection or add Conflict Resolution Patches (CRT).
Logfile 'SPDA_CONFLCHK.LOG': search for "EE"
2EETN219 The system found conflicts for add-on "FI-CA" release "604" (see list):
3 ETN223 Piece list "SAPKGEO01G" of already installed add-on component "IS-UT" release "600"
4 ETN225 ... has conflicts with "FI-CA" release "604" - piece list: "SAPK-604DZINFICA"
3WETN232 Conflict resolution by not installing of "FI-CA" release "604""IS-UT""600"
I don't understand the problem of EHPI: The IS-UT 600 is already in the system, and FI-CA 6.04 belongs to EHP4
Repeating the phase didn't help.....
Any ideas ?
Best regards,
Uta
Edited by: Uta Hedemann on Jun 23, 2010 9:38 PM

Hello Jane,
sounds really good! Thanks for your quick answer. I love SDN for its quick reactions !!!!
In the meanwhile I have opened a message in      BC-EHP-INS but have no answer yet. Do you know , if there is an official SAP-note about the solution? I would like to be on the safe side.
ad a) How can I reinstall the "right "SPAM-Update 7.01/39, if it is in the system already.... ? ( I haved used the one of the newest Solman 7.0 DVD SP 19-23.
ad b) I have checked table PATEXCPT, but the entry ""R3TR,SFSW,CONV_INV" is missing. Will it be installed, if I somehow manage to reinstall the SPAM-Update ?
It would have helped a lot if a warning about a wrong SPAM-Version was in note 822379 or somewhere else. I hope, some SAP-collegue will do it later....
Best regards,
Uta

EHP4 Installation error-CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT.

Hi Folks,
We are doing an EHP4 installation and stuck at the phase SCANDIR_EXTRACT.
Below is the log:
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20100408034401
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Error message CPF0006 running 'LODSAPKRN DEV(STMF) MNTPNT(UPG '/ehp4/ehpi/abap/exenew') KRNLIB(SAPQAS70U2) APYR3KRN(NO) USERDEF(NO) ONESTEP(*NO) STATFILE('/ehp4/ehpi/abap/log/SAPQAS70U2.LOG')'.
...begin dialogue at 20100408034515
Please help me with the problem. Thanks in advace.
Regards,
Bhavnesh

Hi,
I think there is a issue with this on IBM i check the thread :
Upgrade from 470 to SAP ECC 6.0 Ehp4 Sr5 (non unicode)
Mark

EHP4 installation error

Hi everybody.
We are running an EHP4 installation in ECC 6.0 using EHPI installer.
At pre-proccesing phase, when installation is activating abap objects we receive an error because it is not possible to connect sap gateway of service sapgw11 (11 is the number of the shadow instance)
We are looking for procceses and there is no one running for shadow intance.
On this way, we are sure that shadows instance must be started, but we are not able to start it.
When we try to do it, we receive this error:
(13752) Starting: local ms.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13753) Starting: local dw.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13733) Waiting for Child Processes to terminate.
(13733) **** 2009/05/19 19:57:30 Child 13753 terminated with Status 1 .
(13753) **** 2009/05/19 19:57:30 No RestartProgram command for program
2 ****
Instance on host tu1v1ecc started
We can't start shadow instance so installation is stopped.
If anybody knows how to start it, will be great.
Thanks a lot in advance to everybody.
Best regards.

Hi Daniela,
In order to start the shadow instance, please follow below steps
1) Shutdown the CI .
2) The used cleanipc command to clear all semaphores for both shadow instance and CI.
3) Start your CI.
4) go to your upgrade directory (<path-EHPI/abap/bin>).Use below command to start shadow instance
startsap_shd -t R3 -i <Shados instance name> -r <root directory for upgrade> -u <Shadow instance owner>
Please also check in logs if some file (e.g .sapstream file) is in used for in /tmp directory for shadow instance. If it is in use the rename it. and start.
If still phase problem then please let me know.
Thanks
Sunny

Guidelines on optimization of runtime of EHP4 installation phases

Hi
Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
I was trying to get some information and documentation on optimization of runtime of phases of the EHP4 installation. I tried Installation Guide, and notes attached to the document like SAP Note 1292069 - Add. Info. on upgrading to SAP ERP 6.0 EHP4 SR1 ABAP, but this seems to be not big help for me(or might be I oversee something provided by SAP)
Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
Approx DB Size: 2.8 TB
Best regards
Jaswant

Hi Jaswant,
> Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
>
> Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
MAIN_SHDRUN/ACT_UPG -- This phase is very long phase, It always takes very long time. Since your database size is 2.8 TB so it will take long time. Only thing you need to take care is no error will be there.
>
> Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
>
> Approx DB Size: 2.8 TB
Also as far as optimization of upgrade is concerned it depends on a number of things:
1) How many R3trans processes you have choosen for upgrade ? If more is the number of processes then upgrade will de faster. R3trans processes you can decide on basis of your hardware.
2) You can also optimize memory parameters like in shdow instance Go to SE38 and run rsmemory report -> there you can increase memory parameters to optimize upgrade.
3) You can also change database parameters like db_cache_size etc. to increase performemnce.
4) you can also check SAP Note 1275873 - Memory bottleneck during DDIC activation during EHP import
5) To optimize performence, SAP always recommends to select Manual Selection of parameters in configuration phase in which you can set parameters according to your hardware.
6) You can also find information to improve performence of upgrade in Troubleshooting and Administration Guide. This guide you can find in <upgrade directory>/EHPI/abap/htdoc
Hope it helps
Thanks
Sunny
Edited by: Sunny Pahuja on Jun 28, 2009 9:59 AM

ERP EHP4 Installation Problem in Update Database registry Phase.

Hi,
We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921) and DB2 v9.1.0.7.
During installation in phase Update Database Registry, we are getting below error:
SQL1042C An unexpected system error occurred
If any body has faced this error earlier, then please suggest.
Thanks
Sunny

Hi,
Please find below the latest entries in db2diag.log:
2009-12-14-20.15.17.555605-330 I25354A304         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2009-12-14-20.15.17.555785-330 I25659A383         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
DATA #1 : String, 26 bytes
Active EDUs to be waited :
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0001                                  ....
2009-12-14-20.15.17.565945-330 I26043A381         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0000                                  ....
2009-12-14-20.15.17.830570-330 E26425A301         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP    : DB2 DBM
2009-12-14-20.15.24.936396-330 I26727A1630        LEVEL: Event
PID     : 545014               TID : 1           PROC : db2start
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2ged/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C    /db2/db2ged/sqll
0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200    ib/adm/db2star2.
0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000    NOMSG...........
0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
2009-12-14-20.15.25.077684-330 E28358A856         LEVEL: Warning
PID     : 602312               TID : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "89" day(s) left in the evaluation period for
          the product "DB2 Enterprise Server Edition". For evaluation license
          terms and conditions, refer to the IBM License Acceptance and License
          Information document located in the license directory in the
          installation path of this product. If you have licensed this product,
          ensure the license key is properly registered. You can register the
          license via the License Center or db2licm command line utility. The
          license file can be obtained from your licensed product CD.
2009-12-14-20.15.25.174108-330 E29215A384         LEVEL: Warning
PID     : 667782               TID : 1           PROC : db2wdog 0
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
DATA #1 : String, 16 bytes
agentCachingFmp:
DATA #2 : String, 3 bytes
OFF
DATA #3 : String, 5 bytes
Flag:
DATA #4 : Boolean, 1 bytes
false
2009-12-14-20.15.26.288917-330 E29600A1208        LEVEL: Event
PID     : 602312               TID : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START   : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
with level identifier "02080107".
Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
DATA #2 : System Info, 224 bytes
System: AIX gpldeve1 1 6 00C1EF854C00
CPU: total:8 online:4 Threading degree per core:2
Physical Memory(MB): total:14336 free:10662
Virtual Memory(MB): total:35328 free:31640
Swap     Memory(MB): total:20992 free:20978
Kernel   Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
                 shmMax:68719476736 shmMin:1 shmIDs:131072
                 shmSegments:68719476736 semIDs:131072 semNumPerID:65535
                 semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
Cur data size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur core size (bytes) = 0x0000000077359400
nofiles (descriptors) = 0x7FFFFFFFFFFFFFFF
2009-12-14-20.18.03.426764-330 E30809A597         LEVEL: Warning (OS)
PID     : 544840               TID : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
          DIA8701C Access denied for resource "", operating system return code
          was "".
CALLED : OS, -, unspecified_system_function
OSERR   : EACCES (13) "Permission denied"
DATA #1 : File name, 0 bytes
Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
2009-12-14-20.18.03.429260-330 I31407A290         LEVEL: Event
PID     : 544840               TID : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
CHANGE : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
Thanks
Sunny

Error in IS_SELECT Phase ERP 6.0 Upgrade

Hello,
I am in process of upgrading SAP R/3 4.7X200 to ERP 6.0 SR3.
During IS_SELECT phase of PREPARE, I am facing following error.
Cannot set current directory to "
SAPTRANSHOST\sapmnt\trans\EPS"
Logon failure : unknow user name or bad password.
The upgrade was started as SAPADM user.
Host file contains the entry " IP Address Hostname SAPTRANSHOST"
DIR_TRANS =
dbsapsdv\sapmnt\trans
Please suggest how to resolve this error. Any help will be highly appreciated.
Thansk,
Kathy

Hello Kathy,
the problem is that the <sid>adm user does not have access rights to
dbsapsdv\sapmnt\trans.
Please check its permissions on this remote server and repeat the phase, it'll work without problems.
Best regards,
Tomas Black

EHP4 installation on EHP4 Ready ECC 6.0

HI,
I have completed the installation of ECC 6.0 EHP4 Ready SR1 version. Currently my Netweaver Stack is on 701 and all other ECC components on 600. 
We want to upgrade the SAP the EHP4 version. But the server is not accepting the generated stack file. We have correctly chosen the required technical usage and the target stack is also proper in the stack file. 
We are getting the below error. 
 
SAPehpi broke during phase SELSTACKXML in module PREP_EXTENSION / Extension module for start release >= 40B 
Error Message: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system XX1, inst.- no. INITIAL' 
1 ETQ201 Entering upgrade-phase "SELSTACKXML" ("20100804210154") 
2 ETQ367 Connect variables are set for standard instance access 
4 ETQ399 System-nr = '00', GwService = 'sapgw00' 
4 ETQ399 Environment variables: 
4 ETQ399 dbs_ada_schema=SAPR3 
4 ETQ399 auth_shadow_upgrade=0 
4 ETQ399 Set environment for standard connect: 
4 ETQ399 ENV: dbs_ada_schema=SAPR3 
4 ETQ399 ENV: auth_shadow_upgrade=0 
4 ETQ399 Set RFC variables for standard connect: 
4 ETQ399 System-nr = '00', GwService = 'sapgw00' 
4 ETQ399 Set tool parameters for standard connect: 
4 ETQ399 default TPPARAM: DEFAULT.TPP 
1 ETQ200 Executing actual phase 'PREP_EXTENSION/SELSTACKXML'. 
1 ETQ399 Phase arguments: 
2 ETQ399 Arg[0] = 'SPDA_SELSTACKXML.LOG' 
2 ETQ399 Arg[1] = 'FORCE' 
4 ETQ399 EhP stack selection ... 
4 ETQ399 Reading stack content ... 
4 ETQ399 ... reading stack configuration file "/datadump/EHP4/SMSDXML_XX1_20100529205616.460.xml" 
4 ETQ230 Starting RFC Login to: System = "XX1", GwHost = "xxxxxxx1", GwService = "sapgw00" 
4 ETQ359 RFC Login to: System="XX1", Nr="00", GwHost="xxxxxxx1", GwService="sapgw00" 
4 ETQ232 RFC Login succeeded 
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC 
2 ETQ399 Returned table ET_STACK_NCVERS: 
2 ETQ399 Returned table ET_STACK_PACKAGES: 
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL") 
WE have tried regenerating the stack files couple of times, but no hope. Should the SAP have a permanent license to proceed with the EHP4 installation. 
Is there any thing I am missing? 
Kindly help . 
regards, 
Sreekanth 
Edited by: sreekanth ch on Aug 9, 2010 11:06 AM

Hi,
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")
Just to make sure, have you generated and applied "Permanent License" ?
If not, Then generate both Product License and Maintenance license key on Service Market Place and install it on newly installed server.
Then try again...
Regards.
Rajesh Narkhede

Live Cache 7.5. Installation SCM4.1 ERROR MDB-070020

Hi,
we`re trying to install live cache 7.5.00.21 on SCM 4.1.
(Maxdb version of normal db is 7.6.05.09).
We had an other version installed before, which we deleted because of other errors.
Now we`re getting the following error message - any idea?
WARNING 2009-01-16 11:19:37
Execution of the command "/special1/TAD_NEU/lcinst/UNIX/HPIA64/SDBINST '-indep_prog' '/sapdb/programs' '-indep_data' '/sapdb/data' '-depend' '/sapdb/LCA/db'
'-profile' 'APO LiveCache' '-o' '1100' '-g' '1100' '-b'" finished with return code 1. Output:
starting preparing phase of package Base 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Server Utilities 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Database Kernel 7.5.00.21 64 bit
cannot do update check - test file "/sapdb/LCA/db/pgm/kernel" not found
installation exited abnormally at Fr, Jan 16, 2009 at 11:19:37
ERROR 2009-01-16 11:19:37
MDB-070020 The database installer reported an error. Some database applications are probably still running.
Check the log file sdbinst.log.

Michael Schneider wrote:>
> Hi,
>
> we`re trying to install live cache 7.5.00.21 on SCM 4.1.
> (Maxdb version of normal db is 7.6.05.09).
>
> We had an other version installed before, which we deleted because of other errors.
>
> Now we`re getting the following error message - any idea?
Sure - how did you uninstall the former installation?
rm -f /sapdb/<DBSID> ??
To correctly uninstall a MaxDB/liveCache you'll always have to use the SDBUNINST tool.
Since there seems to be another installation on the same server, it's now a bit complicated to clean up the registration mess... You should open a support message for that. Then we'll see what we can do here.
regards,
Lars

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

SAP 4.6C Installation in Cluster error - Oracle 10g HPUX 11.23

Hi all,
We are installing 4.6C in oracle 10g/hpux 11.23 in a cluster environment in primary node.
During the last phase of installation, I get the below error.
INFO 2008-05-05 10:53:02
    Starting up the SAP System
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyCoprocessCreateAsUser:300
    Creating coprocess /bin/sh /home/r3padm/startsap_dbciR3Pd_00 as
    user r3padm and group sapsys ...
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyGroupIDGet:100
    Group id for group sapsys is 201.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyUserIDGet:300
    User id for user r3padm is 7029.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteDo:0
    RC code form SyCoprocessWait = 127 .
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteCheck:0
    Exit code from /bin/sh: 127.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 InstController Action:0
    Step DBR3START_IND_ORA could not be performed.
ERROR 2008-05-05 10:53:03 Main
    Installation failed.
ERROR 2008-05-05 10:53:03 Main
    Installation aborted.
But I am able to start SAP manually using startsap and its successfull.
Can someone help me, what the above error is?
Thanks & Regards
Senthil

Markus,
I read the note, and also I have installaed 4.6C/oracle 10g/hpux11.23 for more than 4 servers and it was successfull.
But this time I am installing in a cluster environment. So I am facing this issue. When I checked in the install directory with ls -lrt the last file isdatabase.log
INFO 2008-05-06 16:02:43 RFCRSWBOINI_IND_IND CRfcOpen:0
    RfcOpen() was successful.
INFO 2008-05-06 16:02:44 RFCRSWBOINI_IND_IND CRfcPing:0
    Pinging of RFC destination was successful.
INFO 2008-05-06 16:02:45 RFCRSWBOINI_IND_IND GetSaprelease:0
    46C
INFO 2008-05-06 16:02:46 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:48 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:49 RFCRSWBOINI_IND_IND DeleteRow:0
    Deleted: 1 rows
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND CleanupSAPEntries:0
    Deletion of 0 SAP rows
INFO 2008-05-06 16:02:52 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND StartJob:0
    Job RSWBOINS_JOB could not be started.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND InstallationDo:0
    Phase failed.
ERROR 2008-05-06 16:02:53 InstController Action:0
    Step RFCRSWBOINI_IND_IND could not be performed.
ERROR 2008-05-06 16:02:53 Main
    Installation failed.
ERROR 2008-05-06 16:02:53 Main
    Installation aborted.
dcecpn0:root >
Also when I logged into the SAP and I can see some error messages in sm21
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 DIA 02 000 SAPSYS            BY4 Database error 2289 at INS access to table DDLOG
18:18:23 DIA 02 000 SAPSYS            BY0 > ORA-02289: sequence does not exist#
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
Its like I am able to display SCC4, when I change to change mode, I get the below error message
"System error: Unable to lock table/view T000"
Can you help
Thanks
Senthil

How do I fix the following error Photoshop 13.1.2 for Creative Cloud Installation failed. Error Co

Photoshop 13.1.2 for Creative Cloud
Installation failed. Error Code: U44M1P7

What is the current version of Ps (Help->System Info), if you have 13.0.1.2 already applied then you need to re-install Ps to get Ps 13.1.2.
As 13.1.2 is a subscription patch this would not get applied over 13.0.1.2.
If this still does not resolves your issue, Kindly mail me installer logs.
For Mac:
"Library/Logs/Adobe",
For Win:
Program Fies(x86)\Common Files\Adobe\Installers
Please mail me @ [email protected]
Regards,
Ashutosh

EHp4 installation - IS_SELECT phase error (MRSS_NW)

Similar Messages

Maybe you are looking for