EHP4 installation on EHP4 Ready ECC 6.0

HI,
I have completed the installation of ECC 6.0 EHP4 Ready SR1 version. Currently my Netweaver Stack is on 701 and all other ECC components on 600. 
We want to upgrade the SAP the EHP4 version. But the server is not accepting the generated stack file. We have correctly chosen the required technical usage and the target stack is also proper in the stack file. 
We are getting the below error. 
 
SAPehpi broke during phase SELSTACKXML in module PREP_EXTENSION / Extension module for start release >= 40B 
Error Message: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system XX1, inst.- no. INITIAL' 
1 ETQ201 Entering upgrade-phase "SELSTACKXML" ("20100804210154") 
2 ETQ367 Connect variables are set for standard instance access 
4 ETQ399 System-nr = '00', GwService = 'sapgw00' 
4 ETQ399 Environment variables: 
4 ETQ399 dbs_ada_schema=SAPR3 
4 ETQ399 auth_shadow_upgrade=0 
4 ETQ399 Set environment for standard connect: 
4 ETQ399 ENV: dbs_ada_schema=SAPR3 
4 ETQ399 ENV: auth_shadow_upgrade=0 
4 ETQ399 Set RFC variables for standard connect: 
4 ETQ399 System-nr = '00', GwService = 'sapgw00' 
4 ETQ399 Set tool parameters for standard connect: 
4 ETQ399 default TPPARAM: DEFAULT.TPP 
1 ETQ200 Executing actual phase 'PREP_EXTENSION/SELSTACKXML'. 
1 ETQ399 Phase arguments: 
2 ETQ399 Arg[0] = 'SPDA_SELSTACKXML.LOG' 
2 ETQ399 Arg[1] = 'FORCE' 
4 ETQ399 EhP stack selection ... 
4 ETQ399 Reading stack content ... 
4 ETQ399 ... reading stack configuration file "/datadump/EHP4/SMSDXML_XX1_20100529205616.460.xml" 
4 ETQ230 Starting RFC Login to: System = "XX1", GwHost = "xxxxxxx1", GwService = "sapgw00" 
4 ETQ359 RFC Login to: System="XX1", Nr="00", GwHost="xxxxxxx1", GwService="sapgw00" 
4 ETQ232 RFC Login succeeded 
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC 
2 ETQ399 Returned table ET_STACK_NCVERS: 
2 ETQ399 Returned table ET_STACK_PACKAGES: 
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL") 
WE have tried regenerating the stack files couple of times, but no hope. Should the SAP have a permanent license to proceed with the EHP4 installation. 
Is there any thing I am missing? 
Kindly help . 
regards, 
Sreekanth 
Edited by: sreekanth ch on Aug 9, 2010 11:06 AM

Hi,
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")
Just to make sure, have you generated and applied "Permanent License" ?
If not, Then generate both Product License and Maintenance license key on Service Market Place and install it on newly installed server.
Then try again...
Regards.
Rajesh Narkhede

Similar Messages

EHP4 installation on top of ecc 6.0

Hi,
I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
pls guide me in this as i need to it urjently.
Rajesh

> I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
You have two possibilities:
- read the installation guides (http://service.sap.com/instguides) and try yourself
- get a basis consultant on your side to help you
> I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
A shadow instance will be built with parts of the tables of the source instance, the new coding from the EHP4 packages is imported and is then merged with your original instance. And yes, those 100 GB are free after that again.
> also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
Yes.
> pls guide me in this as i need to it urjently.
To start the installation you need an installed and configured Solution Manager system. You need that to generate the installation keys and to generate a valid XML file for the EHP4 installation.
And: This is here is a public forum, it's not meant to "teach" you. If you want some real guidance I suggest you attend some SAP classes if you have never done an installation before, especially if Oracle is involved.
Markus

How to include Add-On in EHP4 Installation

This is a fresh install on Unix and Oracle.
We have already installed ERP 6.0 EHP4 Ready and now preparing for EHP4 Install using EHP Installer. We have two Add-Ons CPRXRPM 400 and ECC-SE 604 that we want to include in EHP4 installation. We have already copied the .SAR files for both Add-Ons into Download Directory.
I am not able to figure out how to make Installer pick up these Add-Ons. In BIND_PATCH step and (also in screen where it displays calculated queues) I see all the patches that we downloaded from Solution Manager are listed but do not see my Add-ons. At what stage will these be included or do I need to do something to add them manually.?
Zak

Hi,
When you will download the patches from solution manager there you need to select Technical Usage corresponding to these packages then information about these technical usage will be present in stack xml file. So, ehpi installer will read about these packages from stack xml file and include them in upgrade.
Thanks
Sunny

Problem during installation of EHP4 on IDES with preinstalled EHP3

I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need help

When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis

EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

Hi!
I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgen

Hi,
Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
Thanx,
SBS Administrator.

EHP4 Installation error-CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT.

Hi Folks,
We are doing an EHP4 installation and stuck at the phase SCANDIR_EXTRACT.
Below is the log:
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20100408034401
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Error message CPF0006 running 'LODSAPKRN DEV(STMF) MNTPNT(UPG '/ehp4/ehpi/abap/exenew') KRNLIB(SAPQAS70U2) APYR3KRN(NO) USERDEF(NO) ONESTEP(*NO) STATFILE('/ehp4/ehpi/abap/log/SAPQAS70U2.LOG')'.
...begin dialogue at 20100408034515
Please help me with the problem. Thanks in advace.
Regards,
Bhavnesh

Hi,
I think there is a issue with this on IBM i check the thread :
Upgrade from 470 to SAP ECC 6.0 Ehp4 Sr5 (non unicode)
Mark

EHP4 installation error

Hi everybody.
We are running an EHP4 installation in ECC 6.0 using EHPI installer.
At pre-proccesing phase, when installation is activating abap objects we receive an error because it is not possible to connect sap gateway of service sapgw11 (11 is the number of the shadow instance)
We are looking for procceses and there is no one running for shadow intance.
On this way, we are sure that shadows instance must be started, but we are not able to start it.
When we try to do it, we receive this error:
(13752) Starting: local ms.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13753) Starting: local dw.sapTE1_DVEBMGS11_SHD
pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
(13733) Waiting for Child Processes to terminate.
(13733) **** 2009/05/19 19:57:30 Child 13753 terminated with Status 1 .
(13753) **** 2009/05/19 19:57:30 No RestartProgram command for program
2 ****
Instance on host tu1v1ecc started
We can't start shadow instance so installation is stopped.
If anybody knows how to start it, will be great.
Thanks a lot in advance to everybody.
Best regards.

Hi Daniela,
In order to start the shadow instance, please follow below steps
1) Shutdown the CI .
2) The used cleanipc command to clear all semaphores for both shadow instance and CI.
3) Start your CI.
4) go to your upgrade directory (<path-EHPI/abap/bin>).Use below command to start shadow instance
startsap_shd -t R3 -i <Shados instance name> -r <root directory for upgrade> -u <Shadow instance owner>
Please also check in logs if some file (e.g .sapstream file) is in used for in /tmp directory for shadow instance. If it is in use the rename it. and start.
If still phase problem then please let me know.
Thanks
Sunny

EHP4 installation on 64 bit

Hi,
We are currently installing EHP4 on ecc6.0 with oracle 10g and win2003 server(64 bit)
We have downloaded all package from maintenance optimizer and also the XML file as mentioned in installation guide .
After starting sapehpi installer we are getting error at EHP_INCLUSION phase the error in the sapehpi tool says
*Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!*
*Last error code set: Unknown macro 'COMP@SPLevel'*
however checking the log in EHPI folder the error says
2 ETQ399 Input table IT_PATQ:
3 ETQ399 "SAPK-604BGINSEMBW","000","AOU","SEM-BW","604","SEM-BW 604: Add-On Upgrade","00"
3 ETQ399 "SAPK-604DHINSAPHR","000","AOU","SAP_HR","604","SAP_HR 604 Upgrade","00"
3 ETQ399 "SAPK-701DHINSAPBW","000","AOU","SAP_BW","701","SAP_BW 701 Upgrade","00"
3 ETQ399 "SAPK-701DHINSAPBASIS","000","AOU","SAP_BASIS","701","SAP_BASIS 701 Upgrade","00"
3 ETQ399 "SAPK-604DHINSAPAPPL","000","AOU","SAP_APPL","604","SAP_APPL 604 Upgrade","00"
3 ETQ399 "SAPK-701DHINSAPABA","000","AOU","SAP_ABA","701","SAP_ABA 701 Upgrade","00"
3 ETQ399 "SAPK-701DHINPIBASIS","000","AOU","PI_BASIS","701","PI_BASIS 701 Upgrade","00"
3 ETQ399 "SAPK-604BGINLSOFE","000","AOU","LSOFE","604","LSOFE 604: Add-On Upgrade","00"
3 ETQ399 "SAPK-604DHINISUT","000","AOU","IS-UT","604","IS-UT 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINISPSCA","000","AOU","IS-PS-CA","604","IS-PS-CA 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINISOIL","000","AOU","IS-OIL","604","IS-OIL 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINISM","000","AOU","IS-M","604","IS-M 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINISH","000","AOU","IS-H","604","IS-H 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINISCWM","000","AOU","IS-CWM","604","IS-CWM 604 Upgrade","00"
3 ETQ399 "SAPK-604DHININSURANC","000","AOU","INSURANCE","604","INSURANCE 604 Upgrade","00"
3 ETQ399 "SAPK-604BGINFINBASIS","000","AOU","FINBASIS","604","FINBASIS 604: Add-On Upgrade","00"
3 ETQ399 "SAPK-604DHINFICAX","000","AOU","FI-CAX","604","FI-CAX 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINFICA","000","AOU","FI-CA","604","FI-CA 604 Upgrade","00"
3 ETQ399 "SAPK-604BGINERECRUIT","000","AOU","ERECRUIT","604","ERECRUIT 604: Add-On Upgrade","00"
3 ETQ399 "SAPK-604AGINECCSE","000","AOI","ECC-SE","604","ECC-SE 604: Add-On Installation","00"
3 ETQ399 "SAPK-604DHINECCDIMP","000","AOU","ECC-DIMP","604","ECC-DIMP 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEARETAIL","000","AOU","EA-RETAIL","604","EA-RETAIL 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEAPS","000","AOU","EA-PS","604","EA-PS 604 Upgrade","00"
3 ETQ399 "SAPKGEI05A","000","AOU","EA-IPPE","404","SAP iPPE","00"
3 ETQ399 "SAPK-604DHINEAHR","000","AOU","EA-HR","604","EA-HR 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEAGLTRAD","000","AOU","EA-GLTRADE","604","EA-GLTRADE 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEAFINSRV","000","AOU","EA-FINSERV","604","EA-FINSERV 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEADFPS","000","AOU","EA-DFPS","604","EA-DFPS 604 Upgrade","00"
3 ETQ399 "SAPK-604DHINEAAPPL","000","AOU","EA-APPL","604","EA-APPL 604 Upgrade","00"
4 ETQ234 Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090218225921
2 ETQ095 Disassembling package queue failed, rc = "3", reason = "Error when creating cofile for transport request SAPK-604BGINSEMBW"
4 ETQ399 Deleting 'M:\EHPI\abap\data\R-604BGINSEMBW.SAP'.
please assist

> prepared space for shadow instance of approximately -100GB I cannu2019t understand what is shadow instance & 100GB space. and how installer take EHP4 sofeware and can you please give me the step by step process that will help for me.
I HIGHLY suggest reading the installation guides for EHP4:
http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
--> SAP ERP 6.0
--> SAP enhancement packages for SAP ERP 6.0
--> SAP enhancement package 4 for SAP ERP 6.0
Get there
Must Know document
Master Guide - SAP enhancement package 4 for SAP ERP 6.0
How to install SAP Enhancement Package 4 guide
You need a working an installed Solution Manager system because you will need to use the Maintenance Optimizer to generate an .XML for your system.
Read the above guides and the notes mentioned within. Plan 3 - 4 days only for preparation and reading.
Markus

SGEN after EHP4 Installation on New system

We have completed the ehp4 installation on a ehp4 ready system. After the installation we need to run SGEN as per the guide, however which option we should choose in SGEN
generate all objects or generation after an system upgrade ? we had run the generation after an system upgrade and it completed very soon.
Please advice , should we run generate all objects for selected components ? Also we have not used SGEN after the ehp4 ready installation.
Regards

Hi,
As of now you installed ERP 6.0 only you need to upgrade again to EHP4. SGEN you can run with first option.
Please disable archivelog...otherwise your disk will full.
Thanks and Regards,
Jibin..

Guidelines on optimization of runtime of EHP4 installation phases

Hi
Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
I was trying to get some information and documentation on optimization of runtime of phases of the EHP4 installation. I tried Installation Guide, and notes attached to the document like SAP Note 1292069 - Add. Info. on upgrading to SAP ERP 6.0 EHP4 SR1 ABAP, but this seems to be not big help for me(or might be I oversee something provided by SAP)
Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
Approx DB Size: 2.8 TB
Best regards
Jaswant

Hi Jaswant,
> Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
>
> Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
MAIN_SHDRUN/ACT_UPG -- This phase is very long phase, It always takes very long time. Since your database size is 2.8 TB so it will take long time. Only thing you need to take care is no error will be there.
>
> Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
>
> Approx DB Size: 2.8 TB
Also as far as optimization of upgrade is concerned it depends on a number of things:
1) How many R3trans processes you have choosen for upgrade ? If more is the number of processes then upgrade will de faster. R3trans processes you can decide on basis of your hardware.
2) You can also optimize memory parameters like in shdow instance Go to SE38 and run rsmemory report -> there you can increase memory parameters to optimize upgrade.
3) You can also change database parameters like db_cache_size etc. to increase performemnce.
4) you can also check SAP Note 1275873 - Memory bottleneck during DDIC activation during EHP import
5) To optimize performence, SAP always recommends to select Manual Selection of parameters in configuration phase in which you can set parameters according to your hardware.
6) You can also find information to improve performence of upgrade in Troubleshooting and Administration Guide. This guide you can find in <upgrade directory>/EHPI/abap/htdoc
Hope it helps
Thanks
Sunny
Edited by: Sunny Pahuja on Jun 28, 2009 9:59 AM

Upgrade to EhP4/NW 7.01 in ECC

We are on ECC 6 and BI 700.The Basis team is planning for an upgrade to EhP4/NW 7.01 in ECC . Does that mean the bi 7 is upgraded with EHP1? Can some one please clear this. What does NW 7.01 in ECC mean?
Thanks,

Hi,
ABA Support Package 20 for 7.00
Basis Support Package 20 for 7.00
BW Support Package 22 for 7.00
It appears that the BI system is separate as the component levels here do appear to be
from BI system rather than having ECC components also.
Your SP stack level looks to be SPS20 which is quite old and should be updated before
updating system to EHP1.
Please refer to the following documentation:
1142832 - Installation Enhancement Package 1 for Netweaver 700
1146578 - Central Note: Upgrade to Systems on SAP NetWeaver 7.0 EHP1
1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1
1248905 - SP Equivalence for update/upgrade to EHP 1 for SAP NW 7.0
Also you can refer to the Ehancement Package Upgrade Guide at
service.sap.com/instguides
-> Installation & Upgrade Guides
-> SAP NetWeaver
-> SAP NetWeaver 7.0 (2004s)
-> Upgrade
Regards,
Aidan

EhP4 installation ABAP+Java addin. XPRAS Errors in SAPR-603DWINEARETAIL

Chaps,
I am in the downtime phase of this EhP4 installation and the Java is running fine. I am getting this error with the ABAP in file XPRASUPG.ELG:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-603DWINEARETAIL.PDS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A3EEFDT_TRANSPORT 125 BRF+: <<< *** BEGIN: Content from Application Component "LO-MD-MM" *** >>>
A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ") &1"Function RS_PROCESS_PRICAT_K003" >>>
A3EEFDT_CORE 065 Name "RS_PROCESS_PRICAT_K003" has already been used
A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ") &1"Function RS_PROCESS_PRICAT_K003" >>>
A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ") &1"Function RS_MAP_CIN_TO_PRICAT" >>>
A3EEFDT_CORE 065 Name "RS_MAP_CIN_TO_PRICAT" has already been used
A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ") &1"Function RS_MAP_CIN_TO_PRICAT" >>>
A3EEFDT_TRANSPORT 126 BRF+: <<< *** END : Content from Application Component "LO-MD-MM" *** >>>
A3EEFDT_TRANSPORT 034 BRF+: Object activation failed (step: "Check" )
2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT" for "FDT0001" "T"
Any suggestions?
Regards,
Graham

Hi,
In the end I ran out of patience and decided to ignore the error to get it through to the end. Later, SAP responded as follows:
"The issue depends on a deleted function and a new function with the samename within one application. With note 1263261 the problem should be
solved. Maybe you also have to install note 1301695 after it."
I hope this helps,
Regards,
Graham

EHp4 installation - IS_SELECT phase error (MRSS_NW)

Hello everybody,
MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
Any ideas? Thanks!
Jessica.

Hello everybody,
MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
Any ideas? Thanks!
Jessica.

DB2 Post installation after EHP4 Installation

Hi,
I have completed ehp4 installation in db2 9.1 fp7 database windows 2008 server.What are the post installation activities i should do?
I have read in the doc where they have given so many post installations.ie post activities before resuming production etc etc..
But i felt like deleting the old table spaces is important for which they have given the syntax(db2 clp command) also.but if i run that "0 rows selected".pls tell me what is the correct syntax for deleeting old table spaces.
and also pls let me know what other i need to do after ehp4 installation from your experience.
Thanks

Hi Sunny,
Thanks for your reply.
Bur the link you have given,is the common for db2 to delete the table spaces.But I need for the post installation for ehp4 in db2.
for deleting the table spaces,I need to know which are the old table spaces after upgrade for which there is a syntax given in the master guide.below are given in the master guide.
Deleting Substitution Tablespaces
After the enhancement package installation, some tablespaces are no longer used and you can delete them.
To determine the names of these empty substitution tablespaces of the source release enter the following db2 clp command:
db2 "select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%<rel>%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )"
To delete all obsolete tablespaces that are returned by the above mentioned db2 clp command, enter the following db2 clp command at the operating system level for each tablespace listed:
but if i execute no rows selected.
so pls guide me how to do.

Upgrading to ECC 6 EHP4 sp06 from EHP4 sp03

We are upgrading to EHp4 sp06 from EHP4 sp03, where can I find what is new or changes in Material & Ware house management.
I am looking for change in functionality and also focus areas for testing during the upgrade.

Thanks but I was looking for high level differences that the new support pack brings so that I can understand the summary of differences. I have gone down note by note but its very time consuming and at the last time not very descriptive of what the change is about.Thanks for your responce

EHP4 installation on EHP4 Ready ECC 6.0

Similar Messages

Maybe you are looking for