EHP4 Installation

Hi anybody knows if there is a problem with other system if i´ll instal SAP EHP4 without any activation, it's means for example wit SAP XI, SAP BW and other SAP products.?
Best
Marco

Hi, the customer wants to know that, they want to install but don´t want to activate any enhacement of the EHP4.
Just remember if you install all of EHP4 then every time you update the system you will have to update ALL of EHP4 components to next level EHP(not including patches) and not just the business functions you want to use or have activated. That's because you can't have different levels of EHP in the same system(see Note 1139602 - Several enhancement package releases on one system).
The way it should be done is...
1) Decide what new business functionality you would like to add from EHP4
2) Implement the EHP4 Technical Usage for that business function
This way it will reduce any future administration effort when it comes to updating the system. Either way, no new functionality is added until you activate the business function.
Nelis

Similar Messages

  • EHP4 installation on top of ecc 6.0

    Hi,
    I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
    I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
    also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
    pls guide me in this as i need to it urjently.
    Rajesh

    > I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
    You have two possibilities:
    - read the installation guides (http://service.sap.com/instguides) and try yourself
    - get a basis consultant on your side to help you
    > I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
    A shadow instance will be built with parts of the tables of the source instance, the new coding from the EHP4 packages is imported and is then merged with your original instance. And yes, those 100 GB are free after that again.
    > also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
    Yes.
    > pls guide me in this as i need to it urjently.
    To start the installation you need an installed and configured Solution Manager system. You need that to generate the installation keys and to generate a valid XML file for the EHP4 installation.
    And: This is here is a public forum, it's not meant to "teach" you. If you want some real guidance I suggest you attend some SAP classes if you have never done an installation before, especially if Oracle is involved.
    Markus

  • EhP4 installation ABAP+Java addin. XPRAS Errors in SAPR-603DWINEARETAIL

    Chaps, 
    I am in the downtime phase of this EhP4 installation and the Java is running fine.  I am getting this error with the ABAP in file XPRASUPG.ELG:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR-603DWINEARETAIL.PDS
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    A3EEFDT_TRANSPORT 125 BRF+: <<< *** BEGIN: Content from Application Component  "LO-MD-MM"  *** >>>
    A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ")  &1"Function RS_PROCESS_PRICAT_K003" >>>
    A3EEFDT_CORE 065 Name "RS_PROCESS_PRICAT_K003" has already been used
    A3EEFDT_TRANSPORT 026 BRF+: <<< END  : Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ")  &1"Function RS_PROCESS_PRICAT_K003" >>>
    A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ")  &1"Function RS_MAP_CIN_TO_PRICAT" >>>
    A3EEFDT_CORE 065 Name "RS_MAP_CIN_TO_PRICAT" has already been used
    A3EEFDT_TRANSPORT 026 BRF+: <<< END  : Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ")  &1"Function RS_MAP_CIN_TO_PRICAT" >>>
    A3EEFDT_TRANSPORT 126 BRF+: <<< *** END  : Content from Application Component  "LO-MD-MM"  *** >>>
    A3EEFDT_TRANSPORT 034 BRF+: Object activation failed (step: "Check" )
    2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT" for "FDT0001" "T"
    Any suggestions?
    Regards,
    Graham

    Hi,
    In the end I ran out of patience and decided to ignore the error to get it through to the end. Later, SAP responded as follows:
    "The issue depends on a deleted function and a new function with the samename within one application. With note 1263261 the problem should be
    solved. Maybe you also have to install note 1301695 after it."
    I hope this helps,
    Regards,
    Graham

  • How to include Add-On in EHP4 Installation

    This is a fresh install on Unix and Oracle.
    We have already installed ERP 6.0 EHP4 Ready and now preparing for EHP4 Install using EHP Installer. We have two Add-Ons CPRXRPM 400 and ECC-SE 604 that we want to include in EHP4 installation. We have already copied the .SAR files for both Add-Ons into Download Directory.
    I am not able to figure out how to make Installer pick up these Add-Ons. In BIND_PATCH step and (also in screen where it displays calculated queues) I  see all the patches that we downloaded from Solution Manager are listed but do not see my Add-ons. At what stage will these be included or do I need to do something to add them manually.?
    Zak

    Hi,
    When you will download the patches from solution manager there you need to select Technical Usage corresponding to these packages then information about these technical usage will be present in stack xml file. So, ehpi installer will read about these packages from stack xml file and include them in upgrade.
    Thanks
    Sunny

  • EHP4 installation on EHP4 Ready ECC 6.0

    HI,
    I have completed the installation of ECC 6.0 EHP4 Ready SR1 version. Currently my Netweaver Stack is on 701 and all other ECC <br/>components on 600. <br/>
    We want to upgrade the SAP the EHP4 version. But the server is not accepting the generated stack file. We have correctly <br/>chosen the required technical usage and the target stack is also proper in the stack file.<br/>
    We are getting the below error.<br/>
    <br/>
    SAPehpi broke during phase SELSTACKXML in module PREP_EXTENSION / Extension module for start release >= 40B<br/>
    Error Message: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system XX1, inst.-<br/>no. INITIAL'<br/>
    1 ETQ201 Entering upgrade-phase "SELSTACKXML" ("20100804210154")<br/>
    2 ETQ367 Connect variables are set for standard instance access<br/>
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'<br/>
    4 ETQ399 Environment variables:<br/>
    4 ETQ399   dbs_ada_schema=SAPR3<br/>
    4 ETQ399   auth_shadow_upgrade=0<br/>
    4 ETQ399 Set environment for standard connect:<br/>
    4 ETQ399 ENV: dbs_ada_schema=SAPR3<br/>
    4 ETQ399 ENV: auth_shadow_upgrade=0<br/>
    4 ETQ399 Set RFC variables for standard connect:<br/>
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'<br/>
    4 ETQ399 Set tool parameters for standard connect:<br/>
    4 ETQ399   default TPPARAM: DEFAULT.TPP<br/>
    1 ETQ200 Executing actual phase 'PREP_EXTENSION/SELSTACKXML'.<br/>
    1 ETQ399 Phase arguments:<br/>
    2 ETQ399 Arg[0] = 'SPDA_SELSTACKXML.LOG'<br/>
    2 ETQ399 Arg[1] = 'FORCE'<br/>
    4 ETQ399 EhP stack selection ...<br/>
    4 ETQ399 Reading stack content ...<br/>
    4 ETQ399 ... reading stack configuration file "/datadump/EHP4/SMSDXML_XX1_20100529205616.460.xml"<br/>
    4 ETQ230 Starting RFC Login to: System = "XX1", GwHost = "xxxxxxx1", GwService = "sapgw00"<br/>
    4 ETQ359 RFC Login to: System="XX1", Nr="00", GwHost="xxxxxxx1", GwService="sapgw00"<br/>
    4 ETQ232 RFC Login succeeded<br/>
    4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC<br/>
    2 ETQ399 Returned table ET_STACK_NCVERS:<br/>
    2 ETQ399 Returned table ET_STACK_PACKAGES:<br/>
    4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")<br/>
    WE have tried regenerating the stack files couple of times, but no hope. Should the SAP have a permanent license to proceed with <br/>the EHP4 installation.<br/>
    Is there any thing I am missing?<br/>
    Kindly help .<br/>
    regards,<br/>
    Sreekanth<br/>
    Edited by: sreekanth ch on Aug 9, 2010 11:06 AM

    Hi,
    4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")
    Just to make sure, have you generated and applied "Permanent License" ?
    If not, Then generate both Product License and Maintenance license key  on Service Market Place and install it on newly installed server.
    Then try again...
    Regards.
    Rajesh Narkhede

  • EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

    Hi!
    I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
    The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
    The error I get is:
    CURRENTPHASE PREP_INPUT/KX_CPYORG
    ...started at 20090320163915
    Using phase log file 'KX_CPYORG.LOG'.
    Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
    Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
    ...begin dialogue at 20090320164430
    How can I solve this problem?
    Thank you very much!
    regards
    Ju00FCrgen

    Hi,
    Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
    Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
    Thanx,
    SBS Administrator.

  • EHP4 Installation error-CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT.

    Hi Folks,
    We are doing an EHP4 installation and stuck at the phase SCANDIR_EXTRACT.
    Below is the log:
    CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
    ...started at 20100408034401
    Using phase log file 'SCANDIRX.LOG'.
    Error message set: 'Error message CPF0006 running 'LODSAPKRN DEV(STMF) MNTPNT(UPG '/ehp4/ehpi/abap/exenew') KRNLIB(SAPQAS70U2) APYR3KRN(NO) USERDEF(NO) ONESTEP(*NO) STATFILE('/ehp4/ehpi/abap/log/SAPQAS70U2.LOG')'.
    ...begin dialogue at 20100408034515
    Please help me with the problem. Thanks in advace.
    Regards,
    Bhavnesh

    Hi,
    I think there is a issue with this on IBM i check the thread :
    Upgrade from 470 to SAP ECC 6.0 Ehp4 Sr5 (non unicode)
    Mark

  • EHP4 installation error

    Hi everybody.
    We are running an EHP4 installation in ECC 6.0 using EHPI installer.
    At pre-proccesing phase, when installation is activating abap objects we receive an error because it is not possible to connect sap gateway of service sapgw11 (11 is the number of the shadow instance)
    We are looking for procceses and there is no one running for shadow intance.
    On this way, we are sure that shadows instance must be started, but we are not able to start it.
    When we try to do it, we receive this error:
    (13752) Starting: local ms.sapTE1_DVEBMGS11_SHD
    pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
    (13753) Starting: local dw.sapTE1_DVEBMGS11_SHD
    pf=/usr/sap/trans/EHPI/abap/TE1/SYS/profile/TE1_DVEBMGS11_tu1v1ecc
    (13733) Waiting for Child Processes to terminate.
    (13733) **** 2009/05/19 19:57:30 Child 13753 terminated with Status 1 .
    (13753) **** 2009/05/19 19:57:30 No RestartProgram command for program
    2 ****
    Instance on host tu1v1ecc started
    We can't start shadow instance so installation is stopped.
    If anybody knows how to start it, will be great.
    Thanks a lot in advance to everybody.
    Best regards.

    Hi Daniela,
    In order to start the shadow instance, please follow below steps
    1) Shutdown the CI .
    2) The used cleanipc command to clear all semaphores for both shadow instance and CI.
    3) Start your CI.
    4) go to your upgrade directory (<path-EHPI/abap/bin>).Use below command to start shadow instance
    startsap_shd -t R3 -i <Shados instance name> -r <root directory for upgrade> -u <Shadow instance owner>
    Please also check in logs if some file (e.g .sapstream file) is in used for in /tmp directory for shadow instance. If it is in use the rename it. and start.
    If still phase problem then please let me know.
    Thanks
    Sunny

  • EHp4 installation - IS_SELECT phase error (MRSS_NW)

    Hello everybody,
    MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
    Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
    Any ideas? Thanks!
    Jessica.

    Hello everybody,
    MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
    Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
    Any ideas? Thanks!
    Jessica.

  • DB2 Post installation after EHP4 Installation

    Hi,
    I have completed ehp4 installation in db2 9.1 fp7 database windows 2008 server.What are the post installation activities i should do?
    I have read in the doc where they have given so many post installations.ie post activities before resuming production etc etc..
    But i felt like deleting the old table spaces is important for which they have given the syntax(db2 clp command) also.but if i run that "0 rows selected".pls tell me what is the correct syntax for deleeting old table spaces.
    and also pls let me know what other i need to do after ehp4 installation from your experience.
    Thanks

    Hi Sunny,
    Thanks for your reply.
    Bur the link you have given,is the common for db2 to delete the table spaces.But I need for the post installation for ehp4 in db2.
    for deleting the table spaces,I need to know which are the old table spaces after upgrade for which there is a syntax given in the master guide.below are given in the master guide.
    Deleting Substitution Tablespaces
    After the enhancement package installation, some tablespaces are no longer used and you can delete them.
    To determine the names of these empty substitution tablespaces of the source release enter the following db2 clp command:
    db2 "select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%<rel>%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )"
    To delete all obsolete tablespaces that are returned by the above mentioned db2 clp command, enter the following db2 clp command at the operating system level for each tablespace listed:
    but if i execute no rows selected.
    so pls guide me how to do.

  • SGEN after EHP4 Installation on New system

    We have completed the ehp4 installation on a ehp4 ready system. After the installation we need to run SGEN as per the guide, however which option we should choose in SGEN
    generate all objects  or generation after an system upgrade ? we had run the generation after an system upgrade and it completed very soon.
    Please advice , should we run generate all objects for selected components ? Also we have not used SGEN after the ehp4 ready installation.
    Regards

    Hi,
      As of now you installed ERP 6.0 only you need to upgrade again to EHP4. SGEN you can run with first option.
    Please disable  archivelog...otherwise your disk will full.
    Thanks and Regards,
    Jibin..

  • Guidelines on optimization of runtime of EHP4 installation phases

    Hi
    Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
    Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
    I was trying to get some information and documentation on optimization of runtime of phases of the EHP4 installation. I tried Installation Guide, and notes attached to the document like SAP Note 1292069 - Add. Info. on upgrading to SAP ERP 6.0 EHP4 SR1 ABAP, but this seems to be not big help for me(or might be I oversee something provided by SAP)
    Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
    Approx DB Size:      2.8 TB
    Best regards
    Jaswant

    Hi Jaswant,
    > Our system is SAP ECC 6.0 SP10 without any EHP on HP-UX and Oracle.
    >
    > Currently we are running EHP4 installation on our sandbox on top of EHP3. We are in preprocessing phase. I observe that a phase MAIN_SHDRUN/ACT_UPG is going on more then 5 hours upto the composing of this message. I can observe activity into the system (SM50).
    MAIN_SHDRUN/ACT_UPG -- This phase is very long phase, It always takes very long time. Since your database size is 2.8 TB so it will take long time. Only thing you need to take care is no error will be there.
    >
    > Here my question is, can we have some anchor document or note for optimization of system settings and parameters which will help us to optimize the runtime of different phases of installation. If not for all then at least please suggest for this phase and other for which it is available.
    >
    > Approx DB Size:      2.8 TB
    Also as far as optimization of upgrade is concerned it depends on a number of things:
    1) How many R3trans processes you have choosen for upgrade ? If more is the number of processes then upgrade will de faster. R3trans processes you can decide on basis of your hardware.
    2) You can also optimize memory parameters like in shdow instance Go to SE38 and run rsmemory report -> there you can increase memory parameters to optimize upgrade.
    3) You can also change database parameters like db_cache_size etc.  to increase performemnce.
    4) you can also check SAP Note 1275873 - Memory bottleneck during DDIC activation during EHP import
    5) To optimize performence, SAP always recommends to select Manual Selection of parameters in configuration phase in which you can set parameters according to your hardware.
    6) You can also find information to improve performence of upgrade in Troubleshooting and Administration Guide. This guide you can find in <upgrade directory>/EHPI/abap/htdoc
    Hope it helps
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Jun 28, 2009 9:59 AM

  • SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

    Hi,
    I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
    I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
    I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
    I need clarifications on these.
    1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
    2.Should we give seperate <SID> for both instances and create seperate databases?
    3.Hard disk requirement for this set up.(We have 150 GB including C drive)
    4.Steps to perform after installing ECC6.0 EHP4 ready
    5.Please send me the doc. if anyone has
    Anyhelp would be highly appreciated.
    Regards,
    Surya

    > 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4  functionality in the SAP ERP 6.0 -EHP4 ready system.
    > It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
    Yes..
    >
    > 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
    Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
    >
    > Any solutions or suggestions from others also welcome.
    Why do u want a dual stack ECC ystem?? any specific requirement???
    Regards,
    Nirmal.K
    Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

  • Error in CONFLICT_CHECK during EHP4 Installation

    I have installed a new ERP system from the installation DVDs  for ERP 6.0 EHP4 Ready. As part of the post-installations  I am  installing EHP4.
    I have installed the newest SPAM 7.01/39 (and Basis-SPs SAPKB70104-SAPKB70106, ...)
    I generated a stackfile in solman with target stack  and added only Patch 21 for HR and EA-HR in phase BIND_PATCH.
    During phase CONFLICT_CHECK I get:
    ERROR> Conflicts found.
          Check log file 'SPDA_CONFLCHK.LOG' for details.
           To resolve the conflicts the current step will be repeated and you must change your Add-on or Support Package selection or add Conflict Resolution Patches (CRT).
    Logfile 'SPDA_CONFLCHK.LOG': search for "EE"
    2EETN219 The system found conflicts for add-on "FI-CA" release "604" (see list):
    3 ETN223 Piece list "SAPKGEO01G" of already installed add-on component "IS-UT" release "600"
    4 ETN225 ... has conflicts with "FI-CA" release "604" - piece list: "SAPK-604DZINFICA"
    3WETN232 Conflict resolution by not installing of "FI-CA" release "604""IS-UT""600"
    I don't understand the problem of EHPI: The IS-UT 600 is already in the system, and FI-CA 6.04 belongs to EHP4
    Repeating the phase didn't help.....
    Any ideas ?
    Best regards,
    Uta
    Edited by: Uta Hedemann on Jun 23, 2010 9:38 PM

    Hello Jane,
    sounds really good! Thanks for your quick answer. I love SDN for its quick reactions !!!!
    In the meanwhile I have opened a message in      BC-EHP-INS  but have no answer yet.  Do you know , if there is an official SAP-note about the solution?  I would like to be on the safe side.
    ad a) How can I reinstall  the "right "SPAM-Update 7.01/39, if it is in the system  already.... ?  ( I haved used the one of the newest Solman 7.0 DVD SP 19-23.
    ad b) I have checked table PATEXCPT, but the entry  ""R3TR,SFSW,CONV_INV" is missing. Will it be installed, if I somehow manage to reinstall the SPAM-Update ?
    It would have  helped a lot  if a warning about a wrong SPAM-Version  was in note 822379  or somewhere else. I hope, some SAP-collegue will do it later....
    Best regards,
    Uta

  • Managing Transports during EHP4 Installation

    Hi,
    Appreciate some help. We will soon be installing EHP4 in our DEV ERP system. After the installation, DEV ERP will be with EHP4 but QAS and PRD will not. Those will be installed after tests and checks have been completed. Can changes be transported across to QAS and PRD from DEV? Thanks.

    Hi Shahnaz,
    I am not able to understand by installing EHP4 but not activating.
    E.g.- If you are upgarding your SAP_Basis package to 701 then you don't need to do some extra step to activate it.
    Thanks
    Sunny

  • EHP4 installation :PREP_INPUT/DBQUERY_PRE

    Hi experts
    We are trying to upgrade our ECC system to EHP4 . Currenty we have stuck with the following error
    ERROR: SYSTEM password does not work, please reenter
    Enter the password for the ORACLE user "SYSTEM"
    We have enter the master password which was used during the installation we are getting the error .
    We have reset the password of system in the database level and try to start the ehp from first still the same error
    We are using the distribute installation
    SAP -Windows
    Database -Oracle -Linux
    Any input will be great help
    Regards
    Haynes

    Hi Haynes,
    The problem may be because you need to excute the BRTOOLS in
    application server or CI (If CI and DB are on different servers).
    Brtools needs its own environment variables.
    Similarly to the workaround provided in attached note 1292069;
    Please, try setting SAPDATA_HOME to the EHPI directory
    You can try setting SAPDATA_HOME similarly to the pointed in note
    to your EHPI directory (e.g. X:\usr\sap\EHPI\abap\tmp; or whichever is)
    -.  Stop the upgrade assistant and SAPEHPI.
    -.  Set the environment variable SAPDATA_HOME to the directory
        \usr\sap\EHPI\abap\tmp for user <sapsid>adm.
    -.  Start the SAPEHPI from this user and the upgrade assistant.
    -.  Use the 'repeat' option for this phase.
    It is also possible that the directory /usr/sap/trans/EHPI/abap/exe/brconnect can't
    be accessed. Please check the permissions for this directory.
    Regards,
    Aidan

Maybe you are looking for

  • How to get value for a global variable from an exel file?

    Hallo all, I am a beginner in LabVIEW and I have  a problem in reading datas from an exel file . I would like to import a group of data with timestamps from exel file to a global variable. for ex. speed, acceleration and position of 4 different senso

  • 'Album view' for audiobooks?

    I'm aware that normally iPods simply display all audiobook tracks in a single list (perhaps assuming that each audiobook will be one file - which is strange since even iTunes doesn't distribute them like that). However I've also read in a couple of t

  • How to deinterlace live video using flash as a broadcaster?

    I am trying to replicate the deinterlace functionality that is available in FMLE in a simple flash broadcaster that is hosted on my website. I have built a flash broadcaster (using Flash CS4 and AS2) that connects to my FMS server with the aim that p

  • PARTITION RANGE SUBQUERY - Access path

    Below quote is from Oracle product documentation. <quote> If the table with the WHERE predicate is relatively small compared to the partitioned table, and the expected reduction of records or partitions for the partitioned table is significant, Oracl

  • Zoom shortcuts on Reader 10.1.1 and Mac OS 10.6

    Hello, I'm using Mac OS 10.6.8 and Reader 10.1.1. Ever since I upgraded to Adobe Reader 10 I have had problems with the zoom shortcuts (i.e. command +  , command -). Instead of zooming, command+ rotates the document, and command- simply does nothing.