EHP4 - PPMP - Copied Template - WD - Issue

Dear Member,
Iu2019ve copied the template from Predefined Performance Management process (PPMP), added on Criterion group and released the template. If I view the document in portal after creating it from PHAP_PREPARE_PA, The Web dynpro view does not have a newly created u2018Criterion groupu2019 tab. It has a standard PPMP view. Do you know what kind of setting I should make to view my template view in the portal?
u2026Naddy

Dear Sebastian,
Do i need to activate or change settings in portal in order to use the standard performance management?
I found this page,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/9f/ebdc5cba224602bad02319b6af4cbd/frameset.htm
Should i replace the iView to generic as mentioned in the page?
I do have too many restriction in order to change the portl settings so i can't really try various options. I would appreciate your help.
...Naddy

Similar Messages

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

Copying template project

hello all,
We are trying to copy our template project which holds the complete business process structure including all content and documentation in our production system, to safeguard our template project. The target project type is also a template project. If we copy the template project with transaction solar_project_admin, we cannot get into the copied template project. We receive the next error message the "process structure doesn't not exist" and SAP refers to the SOLAR_GEN_* batch job, which didn;t run correctly. If we copy the template project in our test environment we don't have any problems. Only thing is that in the source template project in the template tab of project administration, the number of templates is growing each time we do a copy template project.
It seems that it is not possible to copy templates in production and probably that is why no process structure is created in the target template project.
Does anybody come across this issue?
thanks in advance,
Ralph

Hi Srini,
If you want to copy your template project e.g. for saveguarding your template project, you can copy the template project by using the transaction solar_project_admin. It is only possible to copy template to template.
The moment you copy the template project the assigned templates will be copied because they need to be unique. The background batch job does copy these assigned templates and will name the template an unique name e.g. template1.
For copying these templates you need to open your customizing otherwise the background job cannot copy the templates.
hope this will help.
Ralph

How to setup a template to issue SHA1 certs if I have a SHA256 chain

Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet Singh

Certificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Copy Templates from VMM 2008 to VMM 2012 R2

Hi,
I would like to know if it was possible to copy Templates from VMM 2008 to VMM 2012 R2 ?
Thank you

I have never tried this, but you can for sure re-use the physical objects like VHD's, ISO's etc.
The template configuration and profiles are metadata stored in the database.
Based on how things changed with VMM 2012 compared with 2008, you will have several new options and capabilites in the profiles for 2012.
I would recommend you to re-create those (hardware profiles, guest os profiles, application profiles etc) in 2012, as there is no logical mapping from the previous versions.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Job Container - Copy template - Execution date in Job container

Hi Friends,
For the SEPA Payment method B, inorder to plan the Job, I have created a job container in FKJOXTR.
Executed on Date and Due date in FPY1 should be DateId.
In my container, for the Copy template I have used 25.02.2014/B0001 -- In FPY1, I have set the parameters in such away, DateId as 25.02.2014, Executed Date as 25.02.2014 and Duedate as 25.02.2014.
The Job executed on 26.02.2014 from the Job container. But in the Paymnet Run the parameters were in such a way, DateId as 26.02.2014, Executed Date as 25.02.2014 and Duedate as 26.02.2014.
The Problem is executed date was copied from the template instead of taking DateID whihc is wrong. Please help me.
Regards,
Lakshmi.

Customized using event 1741

IPhoto '11 emailing (using "Classic" template), margin issue

Hi all,
Anyone have a problem when emailing from within iPhoto '11 - when I email a portrait oriented photo using the "Classic" template, the far-right margin of the blue text box seems to 'run off the page' and become invisible. So that any text I type that's up against the right hand side margin, is not visible.
Does that make sense? Anyone with the same issue?
James

I'm unable to reproduce that effect. Any portrait photo emailed in the Classic mode ends up at the left hand side of the window. No matter what size is chosen the photo fits the email window.
Try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Live text template render issue when using Media Encoder?

I'm running into flash frames with Media Encoder exports of Premiere sequences using the live text templates.
Unfortunately, AME doesn't flag it as an error, so the render completes without any issues in the render log and the only way to find it is to watch the rendered file.
I have tried different combinations of having After Effects open or closed, with the live text template comp open or closed; I can't consistently reproduce the problem with any certainty and so am having trouble pinpointing the source.
My only hypotheses so far are that:
The glitches seem to be happening in the dynamic link between AME and PP, not AE and PP. The live text will pop back to the duplicated comp's text for one frame. Video playing simultaneously doesn't pop.
In other words, the AE text template said: "name here". In PP it was edited to say "John Doe", then that comp was duplicated and edited to say "Bob Smith". Everything looks fine in PP. There are no keys on the source text in AE (I have noticed that if there are keys on the source text in AE, the text will pop back to the original AE text at that key in PP).
When rendered out of AME, halfway through Bob Smith's title, it will read "John Doe" for a single frame, then pop back to being Bob.
I've only had this happen so far with AME renders. The renders out of PP haven't given me any issues so far.
It might happen more frequently on longer segments? If a title is up for 45 sec instead of 10 sec, it may be more likely to pop.
The issue seems to occur more often in batch renders out of AME (happened to 3 of 5 files rendered in a batch, AME 2014.1) and/or with unrelated AE comps open (on a single render from AME 2014.2)
Again, it doesn't happen every time or to the same title, or in the same spot. Files are being rendered to ProRes 422 HQ. Unchecked "Use Previews" in AME.
Would be nice to get to the bottom of what's happening so I can recommend something to the editors when I hand off these live text templates to them.
I realize that the live text is a new feature as of 2014.1, but haven't found anyone else talking about this. Would love if this was a very simple fix that I'm missing.
I was able to reproduce the error on 2 different machines, with similar specs:
Premiere CC 2014.1 and 2014.2
Media Encoder CC 2014.1 and 2014.2
Mac tower 2010
2x 6-core Intel Xeon
RAM: 64 GB
Graphics: ATI Radeon HD 5770 and NVidia Quadro K5000 (or K4000)
OS: 10.8.5 Mountain Lion

I'm running into flash frames with Media Encoder exports of Premiere sequences using the live text templates.
Unfortunately, AME doesn't flag it as an error, so the render completes without any issues in the render log and the only way to find it is to watch the rendered file.
I have tried different combinations of having After Effects open or closed, with the live text template comp open or closed; I can't consistently reproduce the problem with any certainty and so am having trouble pinpointing the source.
My only hypotheses so far are that:
The glitches seem to be happening in the dynamic link between AME and PP, not AE and PP. The live text will pop back to the duplicated comp's text for one frame. Video playing simultaneously doesn't pop.
In other words, the AE text template said: "name here". In PP it was edited to say "John Doe", then that comp was duplicated and edited to say "Bob Smith". Everything looks fine in PP. There are no keys on the source text in AE (I have noticed that if there are keys on the source text in AE, the text will pop back to the original AE text at that key in PP).
When rendered out of AME, halfway through Bob Smith's title, it will read "John Doe" for a single frame, then pop back to being Bob.
I've only had this happen so far with AME renders. The renders out of PP haven't given me any issues so far.
It might happen more frequently on longer segments? If a title is up for 45 sec instead of 10 sec, it may be more likely to pop.
The issue seems to occur more often in batch renders out of AME (happened to 3 of 5 files rendered in a batch, AME 2014.1) and/or with unrelated AE comps open (on a single render from AME 2014.2)
Again, it doesn't happen every time or to the same title, or in the same spot. Files are being rendered to ProRes 422 HQ. Unchecked "Use Previews" in AME.
Would be nice to get to the bottom of what's happening so I can recommend something to the editors when I hand off these live text templates to them.
I realize that the live text is a new feature as of 2014.1, but haven't found anyone else talking about this. Would love if this was a very simple fix that I'm missing.
I was able to reproduce the error on 2 different machines, with similar specs:
Premiere CC 2014.1 and 2014.2
Media Encoder CC 2014.1 and 2014.2
Mac tower 2010
2x 6-core Intel Xeon
RAM: 64 GB
Graphics: ATI Radeon HD 5770 and NVidia Quadro K5000 (or K4000)
OS: 10.8.5 Mountain Lion

EBP PO : Unable to duplicate/copy item,GR_NON_VAL issue

Hello,
I am using SRM 5.O .
In Process PO when I go to create the PO with more than one line item following issue comes :
When I entered one line item and check its ok when I click on Duplicate Selected Item or Copy push button than check following error appears .
Flag 'Automatic Settlement' at item level is different; Change not possible
Flag 'Invoice Expected' at item level is different; Change not possible 
Thanks ,
Sachin
null
null

Hello,
I have debugged whole program and found when there is single line item everything is fine & when i clicked on Duplicate Selected Item the value of GR_NON_VAL indicator set in first line item and second Items indicator as it is blank .Where single line Item indicator was blank .
When I am copying the line item than its working OK .
Due to mismatch in items followinng program raise error message .
PERFORM downward_inheritance USING p_hgp_ecom
 p_hgp_icom
 p_guid
 p_object_type
 p_itm_icom
 ls_igp_icom
 p_changed
 CHANGING ls_header.
Is there any idea why system behaving like this ?
Thanks,
Sachin

EHP4 - Stack XML file related issue

Hi,
I have the following two issues from DSWP tcode (or solution_manager):
1. From DSWP code -> Change Management -> Maintenance Optimizer, New
Maintenance Transaction and i select the ERP system , then i select the radio button Enhancement Package Installation after which it is showing a drop down from where i can
select EHP4 installation and second drop down i can select support
stack 03. But if i do the same thing again by coming out and going back
in on the same day it is showing only support stack 01, Next day again
for one time it is showing.. --- Why is it like this ?
2. Also after selecting the EHP4 version, support stack 03 it log's on
to the ERP system and it comes out with lot of components from
which if i select some of them and deselect some of them as per our
need, it continues to next screen and confirms the file from download
manager and also the XML file gets's created but unfortunately the XML
file contains all components including the one we deselect because of
which we ended up in doing all shown components last week. We
are in a stage of applying another technical usage and the xml is
created with all the components again. Any idea how to avoid this ?
Thanks,
Murali.

Hi,
The problem might be configuration of your system in SMSY transaction ...Because if some componenets you have selected there will come as selected by default...
Moreover go to SAP Note 1134872 - Maintenance Optimizer: FAQ for Stack Delta Files and related sap note to this note which contains problems related to MOPZ and stack xml file..
Thanks
Sunny

Blank.template file issue

Alright guys,
I messed up!
I was trying to get pages to permantly set the default language to Australian English, when I found that the pretty much the only way to do it is save a new blank template. (this is the normal blank template with the language set to Australian)
I tried to take it a step further and update ( well replace) the original blank.template file in the package folder,
And now i get error when opening old documents.
I know i shouldnt have messed with the application package
but If anyone here is kind enough to upload a copy of their original blank.template file
i'd be ever so grateful
That should fix it straight away
P.S. yes, i've already slapped myself for replacing without backing up a copy
<Edited by Host>

To have Pages in Australian english you change it in the System preferences. Not fiddeling with the application at all. You can create a blank template and change all the styles to australian english and then save that template as a template and it will be located in My templates in the New tempalte chooser.
To get an original blank template in the right location install Pages again.

BI - Portal Template Installer Issue

Hi all,
Guess it's appropriate forum for this question regarding BI to portal connectivity. I've tried Template Installer from SAP Note 983156 but in it's first step "create RFC destination in abap" fails with following error message:
1 Create Destination in ABAP Import not successful
Element'SAPConfigLib.BIW.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BIW.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
There are few threads on this issue but fail to resolve the issue here. If some came across this issue I'll be pleased if a solution can be shared here.
Regards.

Issue resolved,
Template installer runs on specific SP levels on BI.
Check SAP notes for this.
Rgds.

Missing template/layout issues post-content migration

We are attempting a migration of data and content from 6.3 to 6.2 (for SAP EL integration) and we are seeing two issues. About 1/3 of the meetings display a node with the message: "The template you are looking at is the one we use if the default template feature is not working", another 1/3 show a blank meeting board and have no available layouts, and the remaining 1/3 work fine.
We are still trying to determine if this might be a versioning issue by examining creation/mod dates of the meetings and underlying templates but have yet to find a discernable pattern. Note, all meetings function without issue in the 6.3 system.
My next stop is hunting for DB discrepencies...
Any help appreciated,
Lee

Does anyone know where/how the file system path to content is configured? I have looked through the DB and App file dir with no luck. The (target) lab system I am using was installed with a non-default path (D:/AdobeConnect/breeze...) and the (source) migrated content came from a system with a default path (D:/breeze...). When attempting to access the content library, the object display window just times out. I have verified the content does exist in file system and is uncorrupted.
Any help appreciated,
Lee

Copy and paste issue

While trying to create a simple copy and paste function ( from one open document / image into another open document in Photoshop CS5 ) like:
PsApp.bringToFront();
PsApp.activeDocument.selection.selectAll();
PsApp.activeDocument.selection.copy();
PsApp.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
PsApp.activeDocument.paste();
//more code to work with the pasted image
I have noticed that many times it doesn't paste the image and the next code throws unexpected results, but if I run it in debug mode and place a breakpoint just after calling the function ( like forcing a pause) then it runs fine.
Tried also with scripting listener code, both in flex and Java with the same result; this also happens with a File - place script.
I tried to insert a loop at the end of the process checking if the number of layers have increased after the paste call, and they actually increase but the image is not pasted
For some reason it seems that the clipboard is not working as expected when the process is fast ¿?. Have also tried to clear the clipboard and to purge with no luck.
I have had similar issues with Java scripting before but they were solved using the listener code instead, but it doesn't works now. Other users have the same problem but haven't found a solution.
I'm using CS5 and Extension Builder 1.5.0.2 with Flash Builder 4.5.1

Copy the text, click on the Desktop, CMD+B, and see if it shows up there. If not, then delete the com.apple.finder.plist from your /Library/Preferences folder, OPTION-click & hold the Finder's Dock icon, and select RELAUNCH. That should fix the issue.

Serial Number isn't copied when Goods Issue reference to order

Dear All,
I had maintained serial number profile in material master but I still have a problem when i want to goods issue (TCode MB1A) the material with serial number from refurbishment order (order type PM04).
Why the serial number isn't copied automatically from the serial number that i had entered before in the refurbishment order. it still asked to enter serial number. Logically, it should be listed from the serial number in refurbihsment order.
Is there any configuration that i must do?
Best Regards,
Albert J.

nobody replied

EHP4 - PPMP - Copied Template - WD - Issue

Similar Messages

Maybe you are looking for