EHP4 Reday installation

Hi,
What is the ehp4 ready installation procedure.I have fresh system and ehp4 ready dvd's?what is the flow?
i have read where it said
install ehp4 ready(nw component will be in 7.01 and application component will be in 600) + download patches for ehp4 from mopz + install ehp4 with the patches using sapepi.In this after ehp4 ready installation,if i update any one component say sap_appl to 604 is ok? is system is called ehp4 system at this stage? or do i need to update ehp4 for all application components like ea_appl,finbasis,ea-finserv etc?
Thanks
Rajesh

Hi,
Kindly go through the forum commands on,
Re: What is SAP ERP 6.0 EHP4 READY SR1 Inst ..??
This would answer all your ques.
Jansi

Similar Messages

ERP6 IDES EHP4 fresh installation

Hi,
We need to Install ERP6.0 IDES with EHP4 fresh installation.I have downloaded all the IDES software
My Company's Application Components>SAP ERP-> SAP ERP ENHANCE PACKAGE> EHP4 FOR SAP ERP 6.0 / NW7.01
IDES Version-->Windows Server
My question is can I directly Install ERP6.0 IDES with EHP4 with Installation master 'sapint.exe' ? Or do i need to go through solution manager down xml file and etc..
advice the steps..
- Jim

The answer is simple if you have the correct files from SAP you will be able to install EnhP 4 via sapinst.exe. You should get a hold of the Master Guides and Installation Documents as they would have anwsered this question for ya. No offense!! Good luck with the installation

EHP4 SPS05 installation on ERP 6.0

Hi,
We are about to start with the EHP4 SPS05 installation on ERP 6.0 quality system which has a CENTRAL and two dialogue instances.
Please can anyone confirm do we need to uninstall dialogue instances after we upgrade the central instances??
As per the document, before dowtime phase starts we need to uninstall the dialog instances and isolate the central instances.
Can i keep my dialogue instances till DOWNTIME phase? Do I need to upgrade dialog instances seperately?
Please can anyone guide me through the exact procedure as to what needs to be followed?
Thanks & regards,
Rozal

Hello Rozal,
You donot need to uninstall and install the dialog instance again.You only need to stop dialog instance before downtime and restart it after the downtime. Check the following stages from EHP4 installation guide :
Actions During the Preprocessing Roadmap Step
=============================================
13. Before the downtime [page 72] begins, you stop all dialog instances, stop SAP Management
Console (MMC) and Software Deployment Manager (SDM), stop jcmon and other standalone
monitoring tools, and, if you are running an enhancement package installation in a high
availability system, you stop the Java central instance and SCS instance.
Actions During the Downtime Roadmap Step
=======================================
5. The installation program asks you to perform the following actions:
n You back up the database.
n You change the database recovery mode.
n You start the dialog instances.
Preparation of SAP System for Downtime (Phase DOWNCONF*)
========================================================
You are requested in phase DOWNCONF_TRANS at the end of step Preprocessing to perform actions that
prepare your SAP system for the downtime.
Perform the following actions:
1. Make sure that all production work in the SAP system is stopped and no users are logged on to
the SAP system.
2. Make sure that all dialog instances are shut down. <<<===============
3. Isolate the central instance.
For more information, see Isolating the Central Instance in the document Troubleshooting and Administration
5.10 Performing Actions Before Phase BEGIN_DOWNTIME
===================================================
The downtime starts when the installation of the ABAP part has reached the DOWNCONF_TRANS phase.
Procedure
Before the downtime begins, perform the following actions:
1. Stop all dialog instances. <<<===============
- Niraj

ECC 6.0 with EHP4 fresh Installation

Hello Gurus,
A fresh ECC 6.0 with EHP4 needs to be installed on Wnidows + Oracle Platform, please let me know which of the following path should be followed?
1. SAP NW 7.0 installation (without EHP1) --> EHP 1 installation --> EHP4 Installation
2. SAP NW 7.0 with EHP1 installation --> EHP4 installtion
3. SAP NW 7.0 installation --> EHP4 installation
The other way to ask this questions is what are the dependencies between NW7.0 (ECC 6), EHP1 and EHP4?
Please let me know which of the above options is feasible and recommended. Please let me know a better option if its not present in the above options.
Regards,
Saurabh.

Hi,
refer the following SAP note 1143022.
Regards
Manohar

SAP ERP ECC6.0 SR3 EHP4 IDES Installation Questions

I have downloaded some IDES SR3 EHP4 installation files from SWDC.
I installed Windows 2003 Server 64 bit, Oracle 10.2.0.4 and Java 1.4 on VMWare.
Now I don't know how to proceed from here because I have some doubt.
1. What Dics Number should I download? Currently I have downloaded 50096277, 51031678, 51036767 UC and Non UC, 51036905, 51036971, 51036972, 51037093, 51037095, 51037622, 51037623.
2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID. If I installed using different SID will it incur additional hard disk space? What need to be done to install both stack in the same machine with different SID?
3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?

Hi,
1. What Dics Number should I download?
Please check that you would need the following disk for the installation.
Installation master DVD, Export DVD for the IDES,Oracle client ,Kernel DVD, database for oracle DVD(RDBMS) and you shall need the Java software component DVD for the installation.
2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID
I think you will have to go with the Mcod installation and the SID fo both ABAP and JAVA should be different .
3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?
Go to service market place and you shall find the installation guide for the perticular os and the Db for which you are going for the installation.
Thanks
Rishi Abrol

ERP 6.0 EHP4 IDES Installation

Hi,
I installed erp 6.0 ehp4 ides abap on a 32-bit win 2003 server following Note 1379040 - IDES ERP 6.0 ECC 6.0 incl. EHP4. The note suggests to install like a system copy changing label.asc and copying all the export files to EXP1 directory . ABAP is installed successfully.
Now i want to Install java EHP4 IDES. When i try to run it seperately again like a system copy the sapinst screen does not accept the label.asc in export directory.How do i proceed on this. Can i use the same export DVD i used for ABAP. If anyone has does this please let me know how to install JAVA .
Thanks
James

Sahad Thanks for the reply,
So i understand that i have to install java seperately with another set of DVD's. Do you know if i can install this on a 32-bit machine (JAVA 7.01) ? FYI, i installed abap as a system copy cos it was a 32-bit machine.
Thanks
James

EHP4 installation - Could not connect to port 4240

Hi,
I am trying to complete my ECC6 EHP4-ready installation by installing
Enhancement package 4 with EHPI tool.
In the initial Extraction phase Import tools (TOOLIMPI) the
installation gets stuck for long time and doesnt progress. When I stop
it Imanually I see this:
Jul 8, 2009 5:03:11 PM [Error]: Unable to execute the SDT request ABAP
operation extract on hostname degtlun1141 instance 33
Then, I see this error in the sdt trace directoty under the
installation folder:
/EHPI/sdt/trc
Here is the error in the file server.trc:
Jul 8, 2009 4:07:46 PM [Error]:
com.sap.sdt.lup.ctrl.SDTRequestExecutor.invokeMethod
(SDTRequestExecutor.java:267) [Thread[ABAP-3,5,main]]: Unable to
execute the SDT request ABAP operation extract on hostname degtlun1141
instance 33
Jul 8, 2009 4:11:27 PM
[Error]:
com.sap.sdt.sapup.rapi.connector.R3upConnector [Thread[ABAP-3,5,main]]:
Could not connect to degtlun1141:4240. Could not connect to host
degtlun1141 on port 4240.
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
When I do a netstat for this port, I see that it is used at the time but by
the EHPI itself because when I stop it the port shows no activity again.
How to proceed i this case?
Thanks
Cyrus

We also are getting the same error.
Did a lsof -i :4240 at the OS and it doesnot return anything which implies that port is free.
Did you start the EHPI
- /EHPI/STARTUP "jce_policy_zip=90000125.ZIP" command in one session and then use
- http://<hostname:4239/ or start the GUI in another session?
We are also facing the same issue where EHPI is failing at the extraction phase with error
Unable to execute the SDT request ABAP operation extract on hostname
<hostname> instance 00
Extraction of the ABAP upgrade request ABAP has failed
Error from unit observer Tool connector failed.
Connection to SAPup could not be established, see following messages.
Could not connect to host <hostname> on port 4240.
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
Any help will be highly appreciated.
Thanks
Kalinga

SGEN after EHP4 Installation on New system

We have completed the ehp4 installation on a ehp4 ready system. After the installation we need to run SGEN as per the guide, however which option we should choose in SGEN
generate all objects or generation after an system upgrade ? we had run the generation after an system upgrade and it completed very soon.
Please advice , should we run generate all objects for selected components ? Also we have not used SGEN after the ehp4 ready installation.
Regards

Hi,
As of now you installed ERP 6.0 only you need to upgrade again to EHP4. SGEN you can run with first option.
Please disable archivelog...otherwise your disk will full.
Thanks and Regards,
Jibin..

Regarding EHP4 Ready ABAP system

Regaring EHP4 ready for EHP4 kit
file name : InstGuide_ERP60SR3EHP4_MSSQL_abap.pdf
And please read page-8 the first sentence begin from
■ After the installation ...
ABAP system based on SAP NetWeaver 7.0 including enhancement package 1,
your system only has the basic ERP 6.0 EHP4 technical usage ABAP
Technology for ERP EHP4. Therefore, the system is in an intermediate
state that is not supported by SAP. To complete the installation
process you must install additional SAP ERP 6.0 EHP4 functionality
in your SAP ERP 6.0 - EHP4 Ready ABAP system.
-> Why SAP does not Support Ehp4 after installation(ie intermediate state)?
- I believe its possible to skip installing Components and can install only required support package while download in MOPZ. In this case SAP does not support? please confirm
regards
jaichan

Hi Jaichan,
it is an EHP4 "ready" installation -> so all application components are on the initial ECC 6.0 level (technically 600) - and the Basis is on NW EHP1 (7.01). This in an intermediate state.
In a second step you are required ERP application parts should be update with EHP4.
In case you want to use a "pure" ECC 6.0 just use a different set of DVD's (e.g. SR3) - then you don't need to install the EHP afterwards.
Best regards,
Christian.

Can not pass with phrase MAIN_SHDRUN/DDIC_UPG

Dear Experts
Database : Oracle 11.2.0.2.0
ERP 6.0 EHP4 Ready
Installer EHP Level 74
In processing upgrade to EHP4
am facing a problem with step MAIN_SHDRUN/DDIC_UPG in phrase Preprocessing
System throws a errors:
Checks after phrase MAIN_SHDRUN/DDIC_UPG were negative !
Choose action :
1. Repeat Pharse
2. Initialize Phrase
3. Exit Program
I chose option Repeat Phrase for this step many times but warning still display. I do not find any logs about this
and then, i chose option Initialize Phrase and i have a reports
a patch job RDDIMPDP must be running in your SAP system with events
trigger enables. If this is not case, -> log into shadow instance and start
report RDDNEWPP as user DDIC in client 000
Choose action :
1. Scheduled
2.Exit
i chose Schedule options and and finally, can not continue
Please help me to resolve
Thanks and best regards

Hello Myfriend,
am also facinf same problem while upgrading to ehp5 please give the solution if you know.
Error Details:
Checks after phase MAIN_SHDRUN/DDIC_UPG were negative!
Last error code set: 1 processes failed, check 'EXSTATC.*' for details
EXSTATC.EC1 log file:
TRACE-INFO: 1: [     dev trc,00000] Fri Nov 18 13:52:34 2011                                                         2993 0.002993
TRACE-INFO: 2: [     dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 11650000              14 0.003007
TRACE-INFO: 3: [     dev trc,00000]      using "G:\EHP5_Down\EHPI\abap\exe\dboraslib.dll"                               13 0.003020
TRACE-INFO: 4: [     dev trc,00000] -->DbSlConnect(vers=-1, type=0, env='[default]', userid='[default]')              173 0.003193
TRACE-INFO: 5: [     dev trc,00000] Prepending D:\usr\sap\IJE\SYS\exe\uc\NTI386 to Path.                              250 0.003443
TRACE-INFO: 6: [     dev trc,00000] Register application info.                                                        141 0.003584
TRACE-INFO: 7: [     dev trc,00000] Oracle client version: 10.2.0.1.0, (dbsl 720 190511, UNICODE[2])                32004 0.035588
TRACE-INFO: 8: [     dev trc,00000] Detailed Oracle client (patch) info not available.                                 24 0.035612
TRACE-INFO: 9: [     dev trc,00000]    Default connection: tnsname ='IJE'                                               89 0.035701
TRACE-INFO: 10: [     dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16'),uc_ln=2                  36 0.035737
TRACE-INFO: 11: [     dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)       3464 0.039201
TRACE-INFO: 12: [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=037D279C)                          45 0.039246
TRACE-INFO: 13: [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=037D2024)                          24 0.039270
TRACE-INFO: 14: [     dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00                          137 0.039407
TRACE-INFO: 15: [     dev trc,00000]                     terr=41004D0045005200490043004100                               21 0.039428
TRACE-INFO: 16: [     dev trc,00000]                     char=55005400460031003600                                       17 0.039445
TRACE-INFO: 17: [     dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'             17 0.039462
TRACE-INFO: 18: [     dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE                               15 0.039477
TRACE-INFO: 19: [     dev trc,00000] Logon as OPS$-user to get SAPSR3's password                                        35 0.039512
TRACE-INFO: 20: [     dev trc,00000] Connecting as /@IJE on connection 0 (nls 0) ... (dbsl 720 190511, UNICODE[2])
TRACE-INFO: 21:                                                                                26 0.039538
TRACE-INFO: 22: [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=037D1F70)                         35 0.039573
TRACE-INFO: 23: [     dev trc,00000] Allocating server context handle                                                   17 0.039590
TRACE-INFO: 24: [     dev trc,00000] Attaching to database server IJE (con=0, svchp=037D1F70, srvhp=037D591C)           54 0.039644
TRACE-INFO: 25: [     dev trc,00000] Fri Nov 18 13:53:55 2011                                                      81019298 81.058942
TRACE-INFO: 26: [     dev trc,00000]     OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR                           12 81.058954
TRACE-INFO: 27: [     dev trc,00000]     OCIServerAttach(OCI_DEFAULT) failed with SQL error 12518:                      114 81.059068
TRACE-INFO: 28: [     dev trc,00000]     ORA-12518: TNS:listener could not hand off client connection
TRACE-INFO: 29:                                                                                27 81.059095
TRACE-INFO: 30: [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '12518'                                 31 81.059126
TRACE-INFO: 31: [     dev trc,00000]     set_ocica() -> SQL error code 12518                                             19 81.059145
TRACE-INFO: 32: [     dev trc,00000] -->oci_get_errmsg (con=0, rc=12518)                                                15 81.059160
TRACE-INFO: 33: [     dev trc,00000]     OCIErrorGet -> SQL error code: 12518                                            70 81.059230
TRACE-INFO: 34: [     dev trc,00000]     ORA-12518: TNS:listener could not hand off client connection
TRACE-INFO: 35:                                                                                23 81.059253
TRACE-INFO: 36: [     dev trc,00000] SAPUSER error or connect error 99=DBSL_ERR_DB, oerr=12518.                         18 81.059271
TRACE-INFO: 37: [     dev trc,00000]     DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB                                     15 81.059286
TRACE-INFO: 38: [    dblink ,00000] ***LOG BY2=>sql error 12518 performing CON                                        54 81.059340
TRACE-INFO: 39: [    dblink ,00000] ***LOG BY0=>ORA-12518: TNS:listener could not hand off client connection           22 81.059362
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
meaning:
connect failed
ERROR: Connect to IJE failed (20111118135355, probably wrong environment).
Thanks,
venkat

SAP Installation in Cluster for ECC Ehp4 SR1 in one cluster

Dear Experts,
Platform is Windows 2008, SQl Server 2008, ECC Ehp4 SR1
In our project, we are implementing ECC 6.0 Ehp4 SR1. Prior to this release, we use to have ABAP & JAVA (dual) stack in single installation. But going through installation guides and posts in SDN understood that now ABAP and JAVA has to be installed separately with different SID.
We have installed development system with separate SID for ABAP stack and java stack in the same box. Similarly, we did it for quality system also.
Now, we need to install the production system which will be in cluster. Earlier we have done cluster installation for ABAP & JAVA stack which would come in same cluster only. But now, since ABAP and JAVA have to be installed with separate SID, can I install both ABAP and JAVA stack in same cluster with two nodes or do we need to have separate cluster for ABAP and JAVA. As of now, we only have two nodes available. If we need to go with separate cluster for ABAP and JAVA we need to get two additional nodes.
So, let me know whether we can use existing two nodes and create a cluster and install ABAP and JAVA with different SID's on it. I have gone through the installation guide and could understand that it can be done. Hence let me know, whether I can go with single cluster. If so, then would be the advantages and disadvantages.
Thanks & Regards,
Sharath

Hi Sharath Babu,
The ASCS & SCS instance must be installed and configured to run on two MSCS nodes in one MSCS
cluster. Ofcourse ESR is also on the same lines.
In brief, for each SAP system you have to install one central instance and at least one dialog instance.
For example, if your local instance on both nodes should have below listed items
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
And these above folders are junction point with Central Instance that's build in SAN Drive with similar set of folders
<drive>:\usr\sap\<SID>\SYS
<drive>:\usr\sap\<SID>\ASCS20
<drive>:\usr\sap\<SID>\SCS10
Regards
Sekhar
Edited by: sekhar on Nov 27, 2009 10:25 AM

Installation of EHP4 - Has anyone got this working

Hi All;
I know that SAP will not like to hear this, but the installation of EPH4 using Solution Manager is a frustrating exercise in futility. I have been trying to install EHP4 for over 2 months now and it keeps failing. I have an open HIGH ticket with SAP and they have moved me forward in the installation process due to Bugs in their tools, but once I get 1 bug resolved I quickly hit another one. SAP Support keeps bouncing me all over the place. I feel like I am dealing with a Beta product rather then a General release solution. Furthermore, SAP's support sense of urgency is completely different then their customer base. I have also had our SAP account manager in to express my frustration and while sympathetic to my situation, he acknowledges there is little he can do.
My latest issue is similar to this link:
Re: EHP4 Error in PREPARE_JSPM_QUEUE
Specifically, I have gotten over the ABAP installation and now I am in the JSPM portion. The installation fails on the PREPARE_JSPM_QUEUE phase with the error:
Here are the last few lines of our PREPARE_JSPM_QUEUE_CSZ_01.LOG file:
Apr 1, 2010 8:56:34 PM [Info]:      com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.connect(AbstractToolConnector.java:729) [Thread[main,5,main]]: Connected to host vmsapdev02 on port 6250.
Apr 1, 2010 8:56:34 PM [Warning]:   com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.discardMsg(AbstractToolConnector.java:775) [Thread[JSPM,5,main]]: Discarding message $com.sap.sdt.sltool.rapi.connector.MsgData@39402772
Apr 1, 2010 8:56:34 PM [Info]:    com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:139) [Thread[main,5,main]]: JSPM was started successfully.
Apr 1, 2010 8:56:34 PM [Info]:      com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:184) [Thread[main,5,main]]: Trying to log in with user J2EE_ADMIN.
Apr 1, 2010 8:56:34 PM [Info]:      com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:190) [Thread[main,5,main]]: JSPM detect non deployable components login request property is set to "true".
Apr 1, 2010 8:56:42 PM [Info]:      com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:199) [Thread[main,5,main]]: JSPM successfully logged in with user J2EE_ADMIN.
Apr 1, 2010 8:56:42 PM [Info]:    com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:143) [Thread[main,5,main]]: JSPM was connected successfully.
Apr 1, 2010 8:56:42 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createQueueFromStack(SAPJupJSPMRapiAdapter.java:287) [Thread[main,5,main]]: Starting creation of deploy queue from file /usr/sap/trans/EPS/in/SMSDXML_DEV_20100331164248.069.xml.
Apr 1, 2010 8:56:43 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.handleMsgClosed(AbstractToolConnector.java:560) [Thread[JSPM,5,main]]: Reporting failed commlink.
Apr 1, 2010 8:56:45 PM [Info]:         com.sap.sdt.jspm.rapi.connector.JSPMConnector.waitForJSPMTermination(JSPMConnector.java:483) [Thread[main,5,main]]: JSPM stopped.
Apr 1, 2010 8:56:45 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Apr 1, 2010 8:56:45 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Stack definition file /usr/sap/trans/EPS/in/SMSDXML_DEV_20100331164248.069.xml contains no applicable SP stacks. For details see SCAN_INBOX*.LOG in current JSPM log directory.
JSPM version is 7.01.5.1.3. Current JSPM log directory is /usr/sap/DEV/DVEBMGS00/j2ee/JSPM/log/log_2010_04_01_20_56_32.
Apr 1, 2010 8:56:45 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:710) [Thread[main,5,main]]: Could not create deploy queue.
Apr 1, 2010 8:56:45 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Apr 1, 2010 8:56:45 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/04/01 20:56:24.
Apr 1, 2010 8:56:45 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/04/01 20:56:45.
Apr 1, 2010 8:56:45 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:21.019.
Apr 1, 2010 8:56:45 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Here are the last few lines in our SCAN_INBOX_01.LOG file:
EHP4 FOR SAP ERP 6.0 / NW7.01 - EHP4 FOR ERP 6.0_NW701
Mar 23, 2010 11:33:27 AM [Info]: Filtering delivery units from stack /usr/sap/trans/EPS/in/SMSDXML_DEV_20100310200324.828.xml.
Mar 23, 2010 11:33:27 AM [Warning]: Rejected delivery unit for component sap.com/JSPM from the stack.
Mar 23, 2010 11:33:27 AM [Warning]: JSPM will not patch NWDI build component sap.com/SAP_BUILDT, because it does not have any deployable content. See SAP Note 1027362 for more information.
Mar 23, 2010 11:33:27 AM [Warning]: Rejected delivery unit for component sap.com/SAP_BUILDT from the stack.
Mar 23, 2010 11:33:27 AM [Warning]: No patch for SAP KERNEL NONUNICODE LINUX_X86_64 found in support package SAP KERNEL that is located in /usr/sap/trans/EPS/in.
Mar 23, 2010 11:33:27 AM [Warning]: Support package SAP KERNEL that is located in /usr/sap/trans/EPS/in is incomplete. See previous messages.
Mar 23, 2010 11:33:27 AM [Warning]: Rejected delivery unit for component sap.com/SAP KERNEL from the stack.
Mar 23, 2010 11:33:27 AM [Warning]: No patch for SAP KERNEL NONUNICODE LINUX_X86_64 found in support package SAP KERNEL that is located in /usr/sap/trans/EPS/in.
Mar 23, 2010 11:33:27 AM [Warning]: Support package SAP KERNEL that is located in /usr/sap/trans/EPS/in is incomplete. See previous messages.
Mar 23, 2010 11:33:27 AM [Warning]: Rejected delivery unit for component sap.com/SAP KERNEL from the stack.
Mar 23, 2010 11:33:27 AM [Warning]: No patch for SAP KERNEL NONUNICODE LINUX_X86_64 found in support package SAP KERNEL that is located in /usr/sap/trans/EPS/in.
Mar 23, 2010 11:33:27 AM [Warning]: Support package SAP KERNEL that is located in /usr/sap/trans/EPS/in is incomplete. See previous messages.
Mar 23, 2010 11:33:27 AM [Warning]: Rejected delivery unit for component sap.com/SAP KERNEL from the stack.
Mar 23, 2010 11:33:27 AM [Warning]: Support package stack SAP NETWEAVER,SAP ERP,EHP4 FOR SAP ERP 6.0_NW701 SAP EHP1 FOR SAP NETWEAVER 7.0,2005,EHP4 FOR ERP 6.0_NW701 (/usr/sap/trans/EPS/in/SMSDXML_DEV_20100310200324.828.xml) is rejected. Check previous warning messages.
I don't know why we are getting these warning messages since the Kernel files (non-unicode for the ABAP portion) and Unicode for the Java stack are in the /usr/sap/trans/EPS/in subdirectory.
SAP has been in my Solution Manager and confirms everything is setup ok. We have a Linux Red Hat EL 5.0 64 bit Application server that has been successfully upgraded from SAP 4.7 x 110 to SAP ECC 6.0 EHP1.
Our Database server is also Linux Red Hat EL 5.0 64 bit running Oracle 10.2.0.4. Our system is vanillia. We are an IT shop so we lots of knowledgable people in the company and can response to SAP requests quickly (which are slow in coming).
I am also wondering if this warning message is causing any problems. SAP has confirmed that our parameter settings are correct but I wonder since I am getting this message.
Apr 2, 2010 11:37:18 AM [Warning]: Software feature SAP ERP 6.0 : SAP
ECC Server - 16 (08/2009) found in stack definition
file /usr/sap/trans/EPS/in/SMSDXML_DEV_20100331164248.069.xml is
applicable for system SID: DEV and HOST: vmsapdev02, but the current
system is SID: DEV and HOST: vmsapdbdev02. This software feature will
be skipped.

Hi NIraj;
Thank you for the prompt reply. In MOPZ I have selected the NON UNICODE portion of the Kernel. Here is a portion of the XML file. I believe this is the area that specifies the NON UNICODE Kernel upgrade. These files are in the /usr/sap/trans/EPS/in directory. Any other ideas?
<software-component>
    <caption>SAP KERNEL 7.01 64-BIT</caption>
    <ppms-number>01200615320200011147</ppms-number>
    <runtime-type>OS</runtime-type>
    <name>KRNL64NUC</name>
    <version>7.01</version>
    <vendor>sap.com</vendor>
    <support-package>
     <caption>SP055 for SAP KERNEL 7.01 64-BIT</caption>
     <name>SP055</name>
     <vendor>sap.com</vendor>
     <ppms-number>01200615321100059367</ppms-number>
     <sp-level>055</sp-level>
     <patch-level>55</patch-level>
     <archives>
      <os-set os="LINUX_X64">
       <db-set db="DBINDEP">
        <archive-name patch-level="55" os="LINUX_X64" db="DBINDEP">SAPEXE_55-10005922.SAR</archive-name>
       </db-set>
       <db-set db="ORA">
        <archive-name patch-level="55" os="LINUX_X64" db="ORA">SAPEXEDB_55-10005926.SAR</archive-name>
       </db-set>
      </os-set>
     </archives>
    </support-package>
   </software-component>
   <software-component>
    <caption>SAP KERNEL 7.01 64-BIT UNICODE</caption>
    <ppms-number>01200615320200011148</ppms-number>
    <runtime-type>OS</runtime-type>
    <name>KRNL64UC</name>
    <version>7.01</version>
    <vendor>sap.com</vendor>
    <support-package>
     <caption>SP055 for SAP KERNEL 7.01 64-BIT UNICODE</caption>
     <name>SP055</name>
     <vendor>sap.com</vendor>
     <ppms-number>01200615321100059368</ppms-number>
     <sp-level>055</sp-level>
     <patch-level>55</patch-level>
     <archives>
      <os-set os="LINUX_X64">
       <db-set db="DBINDEP">
        <archive-name patch-level="55" os="LINUX_X64" db="DBINDEP">SAPEXE_55-10005984.SAR</archive-name>
       </db-set>
       <db-set db="ORA">
        <archive-name patch-level="55" os="LINUX_X64" db="ORA">SAPEXEDB_55-10005987.SAR</archive-name>
       </db-set>
      </os-set>
     </archives>
    </support-package>
   </software-component>
</sp-feature-stack>

Problem during installation of EHP4 on IDES with preinstalled EHP3

I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need help

When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis

EHP4 installation on top of ecc 6.0

Hi,
I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
pls guide me in this as i need to it urjently.
Rajesh

> I have planned to install ecc 6.0 sr3 windows 2008 server oracle and put ehp4 on top of it.Pls guide me how to do that.
You have two possibilities:
- read the installation guides (http://service.sap.com/instguides) and try yourself
- get a basis consultant on your side to help you
> I have read the doc where they have told to provide space for the seperate shadow instance of 100 gb.I have planned to keep to keep 400 gb of hard disk for the ecc 6.0 installation.So do i need to provide extra space(new partition) for the shadow instance?and also i have read that finally this shadow instance will be converted to real instance.So my original space would go after converting in to ehp4?
A shadow instance will be built with parts of the tables of the source instance, the new coding from the EHP4 packages is imported and is then merged with your original instance. And yes, those 100 GB are free after that again.
> also tell me what post installation to be done after ecc 6.0 installation.Say i do all the post installation for ecc 6.0 including client creation and clinet copy with update of stack to 14.After this do i need to do ehp4?
Yes.
> pls guide me in this as i need to it urjently.
To start the installation you need an installed and configured Solution Manager system. You need that to generate the installation keys and to generate a valid XML file for the EHP4 installation.
And: This is here is a public forum, it's not meant to "teach" you. If you want some real guidance I suggest you attend some SAP classes if you have never done an installation before, especially if Oracle is involved.
Markus

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

EHP4 Reday installation

Similar Messages

Maybe you are looking for