EHP4 upgrade -- Error at loading stack file
Hi guys,
I have come across an error while upgrading to EHP4, after making a stack file from solution manager maintainance optimiser, I got the error of "no access to solution manager then I gave the path of stack file and it worked. Now it has sever error : Stack file is invalid. (stack release 2005_1_700 < source release 2008_1_700). Thats because after installing EHP4 ready the level of ST-PI is 2008_1_700 and the solution manager is calculating it 2005_1_700.
Any sugestions on it....
>
Sunny Pahuja wrote:
> Hi Jawad,
>
> have you checked your Shadow system is up or not ? I think your shadow system is down ..Please check..
>
> Thanks
> sunny
>
Sunny Pahuja wrote:
> Hi Jawad,
>
> have you checked your Shadow system is up or not ? I think your shadow system is down ..Please check..
>
> Thanks
> sunny
Hi Sunny,
the sahdow system is running fine, the rfc is also connected but now it has error on phase MAIN_SHDRUN/ALTNTAB_FILL.
here are the logs
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ010 Date & Time: 20090616080047
4 ETQ265 Starting report "RDDNT2MT" with variant "SAP_INIT" in batch
4 ETQ359 RFC Login to: System="ID2", Nr="01", GwHost="win-2cc-s-042", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RDDNT2MT" with job count "08011600" scheduled
4 ETQ359 RFC Login to: System="ID2", Nr="01", GwHost="win-2cc-s-042", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20090616080622
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
*1EETQ248 Missing log file(s) of report "RDDNT2MT", matching "RDDNT2MT\.ID2"*
1 ETQ207 Executing post-phase DB specific actions.
1 ETQ207 Executing post-phase OS specific actions.
4 ETQ010 Date & Time: 20090616080622
Similar Messages
-
ERROR IN LOADING WSDL FILE in adaptive webservice model
Hi
i made my bapi as WDSL file and saved on to my desktop when i try to browse that wsdl file from front end it is saying ERROR IN LOADING WDSL FILE what might be the actual problem.could you please help me.
Thanks
RahulHI
try to save it once again and try or you can use the wsdl url directly . or other option you can do is
use the webservice model(deprecated) . maybe this could solve your problem . -
"Error in loading WSDL file" --- Adaptive Webservice Model
Hi All,
I have been using Deprecated web service model. But now my application is moving to Test. So in order not to change the URL of the webservice model in the Test, i tried with the Adaptive webservice model. But when i try to import the model its saying " Error in loading WSDL file. Check the error log for more details." Please help me out in this.
Thanks in advance,
Pranesh.Hi Pranesh,
Please refer to this thread for similar issue and check the log file for NWDS for more details
Error in loading the WSDL file. Check the error log for more details
Hope it helps
Regards
Arun -
Getting error while loading Flat File
Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
pathHi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy -
Error while loading WSDL File in Eclipse
Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
PrashantIt seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.
-
FDF error while loading xml file onto PDF
Need some help here folks. Im getting a FDF error while loading some value into pdf form. It not happening all the time, 1 out of 60 times with the same xml file onto a new pdf form. Anyone know why this happening. Is there some technical support i can purchase to get this resolved.
9.1 and 9.3.4
Date: Fri, 5 Aug 2011 00:56:19 -0600
From: [email protected]
To: [email protected]
Subject: FDF error while loading xml file onto PDF
Could you let me know which version of Adobe Reader are you using?
> -
EHP4 upgrade Error - phase MAIN_SHDINST/RUN_RSVWSCPY were negative
Hello
Currently I am doing EHP4 upgrade on Oracle 10g with Sun Solaris 5.10 , During preprocessing phase ( The EhP Installation program builds the shadow system from the original one.)
I am getting following error
Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s) found in the log(s), accumulated in "RSVWSCPY.ELG".
Log file for RSVWSCPY.ELG as below
cat RSVWSCPY.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.<SID>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EETGCLN ORA-12154: TNS:could not resolve the connect identifier specified
1EETGCLN Unable to open connection to shadow system.
1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
cat sqlnet.ora
===========
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
05.01.06 set the default to 10
SQLNET.EXPIRE_TIME = 10
05.01.06 set to default
#TCP.NODELAY=YES
05.01.06 set to 32768
DEFAULT_SDU_SIZE=32768
cat tnsnames.ora
=============
<SID>.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = <hostname>)
(PORT = 1527)
(CONNECT_DATA =
(SID = <SID>)
(GLOBAL_NAME = <SID>.WORLD)
===
Could you please help me to fix the issue.
Thanks , BMHello Orkur,
Like bharath reddy and others, I´m facing with the same error, but in my case the platform is OS/400 (V7R1M0) database DB4!
I´m doing an EHP5 upgrade and it stopped in phase MAIN_SHDINST/RUN_RSVWSCPY, the following error is show me:
Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s)
found in the log(s), accumulated in "RSVWSCPY.ELG".
In that RSVWSCPY.ELG file it have the following details:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.PRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EETGCLN
1EETGCLN Unable to open connection to shadow system.
1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
I performed what you mentioned, I execute "Create_SHDDBCON" function module on SE37... but I didn´t continue this execution because I´m not sure what I have to fill in that parameters: DBUSER ; DBPASS and CONENV. You recommended some values to that fields/parameters... but where you have been seeking this values/information? How you know that?
Can you help me/us?
Thank you
JC project -
EHP4 upgrade: Error in Phase ACT_UPG
Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order : "SAPK-604DMINISPSCA"
1 ETP102 system : "RH4"
1 ETP108 tp path : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20091012033215"
1 ETP111 exit code : "12"
1 ETP111 exit code : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started 00 516 S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC) 00 550 S
2.10.2009 01:26:08 Start of mass activation 01:26:08 AD 010 S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c 12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh RamagowniHi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R -
EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi
Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
Best regards
Mischa -
EhP4-Upgrade: Errors in DDIC_ACTIVATION
Hi!
I am hanging in DDIC:ACTIVATION phase of EHP4-Upgrade due to following errors:
Table RNWP_ARRIVAL_LIST cannot be activated
Table RNWP_DEPARTURE_LIST cannot be activated
Table RNWP_OCCUPANCY_LIST cannot be activated
When I go to SE11 and execute the check I get:
Field DWS_OPEN_TASK_ICON in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
Field DWS_OPEN_WORK_ICON in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
Fiels DWS_PROFESSIONS in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
The other error is:
View V_FBN_T74HB cannot be activated
(W- Field SPRAS is a language field. Check usage in key )
(W- Search help J_7LE01_F4 not inherited: Basis field J_7LE01-LAND1 missing in view )
(W- Field name DECIMAL is reserved (Do not use structure as include in DB table) )
Question:
How can I solve these errors?
Thank you!Hi Richa,
DDIC Activation errors should be fixed in Shadow system and not in the original system.
As Sunny said you can ignore the above errors but if i were you i would ask my Development team to look into this issue.
To fix this issue in shadow system you have to unlock the shadow system by using the below command
Go to the bin directory (/usr/sap/SID/upg/abab/bin) and issue the command ./SAPup unlockshd SID and login to client 000
of the shadow system and open the client and from SE06 set the system as Modifiable.After fixing the above error lock the
client and the shadow system ./SAPup lockshd SID and rerun ACT_UPG phase and check the log file to see if the above error
is fixed.
Regards,
Ershad Ahmed. -
The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.
I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.
-
I am getting error while loading the XML file. I have attached the jpg file which shows error details.....pls let em know the solution....
thanksWhat is the error message? Where is the jpeg?
-
Error while loading .app file in HFM Classic
Hi,
I am getting an error while loading a sample HFM .app file which I have generated using DRM Export for the Account hierarchies. The log file gives the following error
The file is attached.
Please help! Thanks!Hi there,
The issue is the question mark at the beginning of the sentence:
The correct format is:
Cheers,
Thanos -
Error while loading xml files using JDBC
Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
UmaI also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.
-
Error while loading XML file to XML_type column
I am trying to load a huge xml file in table having xml_type column. I am getting an error
The following error has occurred:
ORA-20010: Error: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00216: invalid character 140 (0x8C)
Error at line 2 at location: 10
Any suggestions why I might be getting this errors?
Is there any size restriction on the file that we can load with loadfromfile?
THis is the procedure I have written to load the file--
CREATE OR REPLACE procedure vsave_xml_file_to_table(
p_directory in varchar2,
p_filename in varchar2 )
AUTHID DEFINER
as
v_filelocator bfile;
v_cloblocator clob;
v_filelength number;
v_loc number :=10;
begin
dbms_lob.createtemporary(v_cloblocator,true);
v_filelocator := bfilename(p_directory, p_filename);
dbms_lob.fileopen(v_filelocator, dbms_lob.file_readonly);
dbms_lob.loadfromfile(v_cloblocator, v_filelocator,dbms_lob.getlength(v_filelocator));
v_filelength := dbms_lob.getlength(v_filelocator);
DBMS_OUTPUT.PUT_LINE('File is loaded and its size is :'|| v_filelength);
dbms_lob.fileclose(v_filelocator);
--insert into vxml values(1, XMLType.createXML(v_cloblocator));
insert into vxml values(1, XMLType(v_cloblocator,null,0,0));
DBMS_LOB.FREETEMPORARY(v_cloblocator);
exception
when others then
-- close the cursor and file, and reraise.
if dbms_lob.fileisopen(v_filelocator) = 1 then
dbms_lob.fileclose(v_filelocator);
end if;
rollback;
raise_application_error (-20010,'Error: '||sqlerrm|| ' at location: '||v_loc);
end vsave_xml_file_to_table;
The input file is of size 5K.
The procedure loads a file of size around 100 bytes with no problem.
I am on Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
Please help
Thanks!As you said, i have changed the Code, But still the same error,
CREATE OR REPLACE FUNCTION fn_Ins_CLOBDOCUMENT(FILENAME IN VARCHAR2,
CHARSET IN VARCHAR2 DEFAULT NULL)
RETURN CLOB DETERMINISTIC IS
FILE BFILE := BFILENAME('FXLMBAH', FILENAME);
CHARCONTENT CLOB := ' ';
TARGETFILE BFILE;
LANG_CTX NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
CHARSET_ID NUMBER := 0;
SRC_OFFSET NUMBER := 1;
DST_OFFSET NUMBER := 1;
WARNING NUMBER;
BEGIN
IF CHARSET IS NOT NULL THEN
CHARSET_ID := NLS_CHARSET_ID(CHARSET);
END IF;
TARGETFILE := FILE;
DBMS_LOB.FILEOPEN(TARGETFILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.LOADCLOBFROMFILE(CHARCONTENT,
TARGETFILE,
DBMS_LOB.GETLENGTH(TARGETFILE),
SRC_OFFSET,
DST_OFFSET,
CHARSET_ID,
LANG_CTX,
WARNING);
DBMS_LOB.FILECLOSE(TARGETFILE);
RETURN CHARCONTENT;
END;
INSERT INTO XMLTABLE
VALUES(XMLTYPE(fn_Ins_CLOBDOCUMENT('purchaseorder.xml')))
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "LCC.FN_INS_CLOBDOCUMENT", line 17
ORA-06512: at line 1raja
Edited by: KrChowdary on Feb 18, 2009 3:36 PM
Maybe you are looking for
-
Calling a stored procedure with a table of custom types as a out parameter
Hi, I'm trying to use toplink 11.1.1.0.0 to call a stored procudure with 4 in paramrs and a single out parameter of type gsearch_type which is a userdefined type defined as below CREATE or replace TYPE search_object as object (mdlnumber varchar2(12),
-
Some of my file icons are missing from the Mountain Lion desktop. The file name is there but not the icon. The file can be opened when the words are double clicked. The files show up properly in Adobe Bridge. These are Photoshop files. How do I
-
Unable to connect IPAD w/ Retina display to CenturyLink wi-fi
The Ipad recognizes and shows the network, but will not connect when I type the password. The password has been verified. Do I need to try some other method of connecting?
-
Which method (if it exists) can i use if I want to convert my hexadecimal input to a binary format that is compatible with DES operations?
-
T.code creationn for ztable.
i need to create t.code for (ztable)table maintance... in that t.code creation we should not use SM30 . since the user doesnot have access to SM30. pls help me out..