EHP4 upgrade next year and configuration of our US company this year

Hi all,
We have planned to upgrade our ECC6 HRSP27 environment to EHP4 next
year.
We also need to start the configuration of our US subsidiary as
soon as possible. Our US project includes all HR modules (PA, PD,
OM...) including an SAP Payroll and ESS, MSS functionalities.
Can we start configuring our US company and start working on data migration this year, in our current version (ECC6 HRSP27), without having to manage upgrade impacts next year?
If yes, what part of our US project development shouldn't start before the EHP4 upgrade has been
done (for instance benefits, e-recruiting....), and what part of the configuration can start now (for instance personal file and payroll configuration) and can we work on the whole data migration process or do we have to wait or split it into batches?
Your objectives are to deliver the US company as soon as possible after the EPH4 upgrade (which means to start the configuration as soon as possible), and not having to manage upgrade impacts on the configuration of the US company (it means not configuring modules and submodules that may be impacted by EHP4 before the upgrade as been donne).
Thank you for your help !
Bénédicte

Follow the directions here to transfer all of the data from your current phone to your new phone, when you get it:
http://support.apple.com/kb/ht2109

Similar Messages

Unable to extend tablespace while EhP4 upgrade

Hi Gurus,
We are doing EhP4 upgrade from EhP ready SR1. Our database version is DB6 9.7.2. We are using EhPI version 37.
In the chack phase the installer suggests to increase some tablspace size. But the tablespaces are in "Auto Storage Mode". We are unable to extend or add a container to it.
Any suggestions or workarounds for this issue?
Advance thanks.
Kind Regards,
Indrakumar

Thanks for all the replies.
SAP replied with the following workaround and it worked for us.
i)Save all files <upgdir>/bin/DBF.SPC and their content (for example by copying each of these files to DBF.SPC.SAV)
ii) Empty all files <upgdir>/bin/DBF*.SPC; that is do not delete/remove these files but delete all content, so that these files are completely empty!
iii) Make sure that you are having sufficient space in the file systems.
iv) Restart the upgrade/SPACECHK. with empty files there are no space requirements and thus the SPACECHK should finish successfully.
Kind Regards,
Indrakumar

How to verify if Database gateway for DRDA is installed and configured.

Hi All,
How can we verify if Database gateway for DRDA is installed and configured.
Our OS is AIX 5L 64 bit OS.
Rdbms : 11.2.0.3
Regards,

Duplicated
How to verify if Database gateway for DRDA is installed and configured.
+-- thread locked --+
Nicolas.

Monitor and Gwha installations and configurations

I am trying to understand how both work. I have installed Gw Monitor on one of my servers and configured it for gwha on this server, and all works fine. Now with the rest of the servers, do I only have to configure the gwha ?

Did you verify that etc/xinetd.d/gwha has the correct path to the gwha exe
i.e. /opt/novell/groupwise/agents/bin/gwha ?
Also, from YaST, click Network Services - Network services (xinetd). If
necessary, click enable, scroll down to the gwha, select it, then click -
toggle status (on off) and set it to on. Click finish.
Make sure to add an exception to the SLES firewall for port 8400.
jeff
"grpadmin" <[email protected]> wrote in message
news:[email protected]..
>
> Sorry, how do I get port 8400 open, is there something I have to install
> ? I have gwha configured, but cannot see port 8400 opened
>
> jsessler;1912824 Wrote:
>> On 2010-01-04 23:06:01 -0800, grpadmin said:
>>
>> > I am trying to understand how both work. I have installed Gw Monitor
>> on
>> > one of my servers and configured it for gwha on this server, and all
>> > works fine. Now with the rest of the servers, do I only have to
>> > configure the gwha ?
>>
>> Yes, just gwha. Make sure that port 8400 is open on the other servers
>> as that's the port GWHA listens on, and monitor needs to be able to
>> reach it. Also, make sure to create the same account/password on the
>> other servers so that monitor can login and restart the services.
>>
>> Last but not least, if GWHA won't start on the other servers, make
>> sure
>> the /etc/xinetd.d/gwha has the correct path to the gwha exe i.e.
>> /opt/novell/groupwise/agents/bin/gwha
>>
>> best,
>> Jeff
>
>
> --
> grpadmin
> ------------------------------------------------------------------------
> grpadmin's Profile: http://forums.novell.com/member.php?userid=1798
> View this thread: http://forums.novell.com/showthread.php?t=397269
>

Installing and Configuring OBIA with OBIEE, Informatica, DAC

Hi
Can anybody send me set up procedure for , how to install and configure OBIA with OBIEE, Informatica and DAC?
mail Id : [email protected]
Thnks In advance.

Hi,
the setup procedure depends on your Oracle BI Apps version.
You can find all Oracle documentation to install and configure Oracle BI Apps from this URL :
http://www.oracle.com/technetwork/middleware/bi-foundation/documentation/bi-apps-098545.html
hope it helps,
Benoit

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Configuration for 50% CVD/ADC in First year and 50% in Next Year

Dear Experts,
Please confirm me SPRO Setting where we maintain 50% CVD/ADC in First year and 50% in Next Year.
Thanks in Advance.
Ishu

Hii,
ADC will not be deferred to the next year.
Use IP Sub transaction type for on Hold account of CVD.
Regards,
Kumar

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?

Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier.

Can I upgrade MacBook Pro hard disk drive next year?

Hi there! I'm new to the Apple Support Communities!
I am going to buy a new 13" MacBook Pro, 2.5GHz. I am going to buy the base model, with a 500GB 5400 RPM hard disk drive. Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year. So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
Here are the issues:
1) I don't know how I would make it so I could boot from an external USB.
2) And I don't know how to get all my personal information from one drive to the other.
For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup. But Time Machine couldn't back up the whole OS, right? And what would the procedure be anyway? Just turn it on when I'm done the upgrade?
If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
Thanks,
Solid-State Me 

Yes you can replace the hard drive at any time. Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure. Then download a program called "super duper" and follow the instructions to use that software. When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish. What it's doing is copying your drive onto the new drive. Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure. Now you have an external hard drive that is repurposed instead of throwing it away. Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs. After that, use the drive to store files, backup the internal, transfer stuff, whatever.

I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of

I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of July 2013, which I did not. She said that in the system my husband took an upgrade July 29th 2013. He didn't even have a Verizon phone, he had a work phone with T-mobile. I have asked what device he supposedly upgraded to since no phones have been activated and we all still have our same phones and numbers. Remember at the time, said husband had a work phone with T-mobile. I still have the very same phone as do all of the rest of my family members. No one has upgraded. I spoke with "customer service" for more than a half an hour today, Char promised me that her supervisor (Emily) would call me back by 7:30 tonight to clear up this problem. Well guess what? No call back so where should I go from here? Any advice or help would be greatly appreciated. Thank you for your help.

someone swapped upgrades. Phone could have been sold For quick cash.

UseCase: I have installed Flash Builder 4.5 on computer 1. On this computer we configured our licence. This was 4 years ago. Now we set up a computer 2 with Flash Buidler 4.7. We were trying to put in our license to this computer. It did not accept this s

UseCase: I have installed Flash Builder 4.5 on computer 1. On this computer we configured our licence. This was 4 years ago. Now we set up a computer 2 with Flash Buidler 4.7. We were trying to put in our license to this computer. It did not accept this serial. Is it possible to initialize several computers with the same serial number or is this issue related to the version 4.5 or/and 4.7.

Moving this discussion to the Installing and activating Flash Builder forum.

8.0 to 8.2 upgrade: ¿would it affect configuration and/or licensing?

Hello team:
I am planning the upgrade of an ASA 5550 Active/Passive cluster from 8.0 to 8.2 according to the "zero downtime upgrade" documentation available in the web.
I do not have another cluster for comprehensive testing, but I executed a simple migration procedure on a tiny 5505 and neither licensing features nor the configuration (the command sintax) were affected by this process. I know this is something to care about if you go to 8.3, but this is not my case.
I browsed the release notes of 8.2(5) and no special disclaimer was found by me with respect to this release. So everything should work just fine, but I would like to double check for input with respect to these two subjects:
1. ¿Will the licensed features (vpn, concurrent connections, etc) be preserved?
2. ¿ Will the configuration be preserved ?
Your recommendations will be greatly appreciated.
Thanks a lot in advance.
Rogelio Alvez
Argentina

An ASA 8.0 to 8.2 upgrade should not affect configuration or licensing. I have done it many times without any problem. Just follow the published procedure carefully and you will be fine.
While you are working on the boxes, I recommend putting ASDM 6.4(7) on them (if it is not already in use) as it is the recommended version for all 8.x releases.

Getting about $3000 a day in iTunes charges I didn't make can't get history to pull up and can't reach a apple person, scheduled the next available call but it's the 2nd of next year and about 20,000 more dollars from, now went to the iTunes Store no help

My iTunes account is hooked to my debit card and I have thousands of dollars per day coming out of my bank account. I emailed apple several times to get a history so I can find out what the heck is going on and each time I get a generic message followed by a email with a bunch of links telling me how to access my iTunes history. I attempt to do this and I get a message stating iTunes can not be reached. So I go down to my local apple store and am told it's because I did not have wifi, they hook my phone to the apple store wifi and tell me they show no charges. Yet I'm down approximately $12,000 so far and climbing. I call my bank and cancel my debit card and attempt to contact apple again via a link they sent me to schedule a call. When I schedule the call it gives me a message that we are sorry we are unable to schedule a call for you please try again later, I try a future time and date and manage to schedule a telephone call for the second of next year. Is there anyway to access what the **** is going on with my iTunes account in the meantime? Apple doesn't seem to be able to see the charges I just see them on my bank side.
And help is appreciated.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

I am 13 but going into high school next year and possibly an elite boarding school that is 9 hours away from my town. I need to get a mac air for school purposes.How can convince my parents to let me get one?

My house has always had macs and my parents don't like pcs. I don't either. They are slow and so far behind from macs. So i am going into high schoo next year and parents don't let me on the computer without asking and have them all password protected. I did have my own ibook g4 but it broke randomly. My mom says i will isolate myself from too much scree time and get depressed but i love macs and i would like to work in an apple store someday but i'm not even allowed to buy my own ipod touch with my own money. But my mom has an new imac, ipad and iphone and ipod and all of this has been gifts to her. But i really need a computer for school. I have written lists of good reasons not like i want it but good ones and asked nicely but my mom just says because and thats the only reason i need to know. and by the way she is a teacher so she thinks technogly is evil. How can i get the mac air??

I really do not want to enter a family discussion about what you should or should not have. If the MBA is to support your school work then you need to present your arguments on that point. If there is a concern about using a Mac when the school supports PCs then point out a Mac can also use Windows on a BootCamp partition so it is fully compatible with both systems.

EHP4 upgrade next year and configuration of our US company this year

Similar Messages

Maybe you are looking for