EHP4 upgrade on ECC 6.0

Hi Experts,
we are planning to install EHP4 on our ECC 6.0.
We have other systems like
SAP ECC 6.0
SAP NETWEAVER 7.0
SAP SCM 7.0
SAP SRM 4.0
As i have read that EHP4 upgrade requires SAP NETVEAWER 7.0 EHP1 upgrade. Does it means that if SAP ECC 6.0 is upgraded with EHP4 that SAP NETWEAVER 7.0 system should also have EHP1 ?
Thanks in advance.
regards
Vishal

HI
Both possibilities are within reach.
You can upgrade ECC 6.0 EHP4 on Sap Netweaver 7.01 or on Sap Netweaver 7.00.
When you calcule queue in mopz (SOLUTION MANAGER) you can select your upgrade, both options are available.
I recommend you do the upgrade on Sap Netweaver 7.01.
more info:
http://service.sap.com/instguides
Regards
William Neira

Similar Messages

  • EHP4 upgrade from ECC 6.0

    Hi experts,
    We are planning to upgrade to EHP4 from ECC6.0
    We have the following systems installed on non-unicode,
    SAP ECC 6.0
    SAP NETWEAVER 7.0
    SAP SRM 3.0
    Currently, we have customized ESS java webdynpro on our ESS portal, with the EHP4 upgrade and EHP1 on SAP Netweaver 7.0, would there be any implications to the customized ESS iviews ?
    Our ECC 6.0 is on a non-unicode system, is it advisable to take this opportunity to convert to a unicode for scalability aspect ?
    what would be the implications if we remains as non-unicode after EHP4 upgrade ?
    All advices are appreciated !!
    Thanks in advance

    Hi,
    You can find all the relevant information at the below link,
    https://service.sap.com/erp-ehp
    Regards,
    Vishnu

  • Error in EHP4 upgrade

    Hi experts,
    When i am doing EHP4 upgrade to ecc 6.0, EHPI screen closed suddently at configuration phase. if i trying launch the EHPI screen
    it is showing below error
    Jul 26, 2011 8:43:27 AM [Warning]: Tool asked for unknown feature "evaluation"!
    Jul 26, 2011 8:43:27 AM [Info  ]: Feature "evaluation": Tool setting "unknown", server setting "unknown".
    Jul 26, 2011 8:43:27 AM [Info  ]: >> sapparam: sapargv(argc, argv) has not been called!
    Jul 26, 2011 8:43:27 AM [Info  ]: Tool reported normal exit.
    Jul 26, 2011 8:43:27 AM [Info  ]: SAPup terminated with exit code 20.
    Jul 26, 2011 8:43:27 AM [Info  ]: Commlink closed. Waiting for process to terminate before reporting normal exit.
    Jul 26, 2011 8:43:27 AM [Info  ]: Reporting tool exit with rc=20
    Jul 26, 2011 8:43:27 AM [Info  ]: Tool closed connection.
    Jul 26, 2011 8:43:27 AM [Info  ]: Tool exited normally.
    Jul 26, 2011 8:43:27 AM [Info  ]: >> sapparam(1c): No Profile used.
    Jul 26, 2011 8:43:27 AM [Info  ]: >> sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    Jul 26, 2011 8:43:27 AM [Info  ]: >>
    Jul 26, 2011 8:43:27 AM [Info  ]: >> FATAL ERROR: Root directory '/usr/sap/ERR/EHPI700/EHPI/abap' and profile parameter DIR_PUT = '/usr/sap/ERR/put' do not match
    Jul 26, 2011 8:43:28 AM [Info  ]: >> Closed error stream
    Please suggest me on this issue
    Regards
    srinivas

    Hi,
    > Jul 26, 2011 8:43:27 AM [Info  ]: >>
    > Jul 26, 2011 8:43:27 AM [Info  ]: >> FATAL ERROR: Root directory '/usr/sap/ERR/EHPI700/EHPI/abap' and profile parameter DIR_PUT = '/usr/sap/ERR/put' do not match
    > Jul 26, 2011 8:43:28 AM [Info  ]: >> Closed error stream
    >
    Either change the location of the upgrade directory as per value of parameter DIR_PUT or change this parameter to your upgrade directory location. And then try.
    Thanks
    Sunny

  • ECC Upgrade from ECC 5.0 to ECC 6.0 EHP4 - impact on XI 3.0

    Hi,
    We are palnning for upgrade our ECC System from ECC 5.0 to ECC 6.0 EHP4. We do not have any plan of upgrade on XI, which is on XI 3.0.
    After ECC upgrade please provide the impact on XI 3.0 ?
    Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
    Thanks.

    >>Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
    As far as I know, no change is required in XI configuration.
    Regards,
    Praveen Gujjeti.

  • UPGRADE FROM ECC 5.0 TO ECC 6.0 Ehp4

    Hai,
    Can any one tell me the upgrade strategy from ecc 5.0 to ecc 6.0 Ehp4,also before we upgrade to Ehp4 do we have to upgrade to ecc 6.0 ?If no plz provide me with the link for latest documentation on this .
    -regards
    Srinivas Bitra

    Hi Srinivas,
    You can upgrade both in single shot.
    You can include EHP4 along with ECC6.0 version upgrade. in BIND_PATCH phase upgade will prompts you to include EHPs if you want. so there you can include your EHP with SAP version upgrade.
    You can get all these details in Upgrade guide.
    -Srini

  • Upgrade SAP ECC 6.0 with SPS 12 to EHP4

    Hi!
    I would like to update a SAP ECC 6.0 system with EHP4. 
    I am on Windows 64 Bit with Oracle.
    My current SP stack of SAP ECC 6.0 is 12.
    The questions are:
    Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
    If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
    Any helpful information will be very appreciated!
    Thank you!

    Hi
    You can check the below notes
    Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
    Regards
    Uday

  • Query to calculate downtime while upgrading from ECC to EHP4

    Hi Folks,
    I am having below doubts for calculating downtime phase for ehp4 downtime.
    1.Do the end users will be able to work (In Production)  in pre-processing phase in EHP4 upgrade u2026?  (I think yes)
    2.How we will count the downtime  like from Preprocessing phase  to until System is up ? or we will count  from Downtime Phase. (I think from downtime phase)
    Regards,
    Sahil

    Hi,
    >
    > 1.Do the end users will be able to work (In Production)  in pre-processing phase in EHP4 upgrade u2026?  (I think yes)
    >
    Yes. Users will be able to work till pre-processing phase.
    > 2.How we will count the downtime  like from Preprocessing phase  to until System is up ? or we will count  from Downtime Phase. (I think from downtime phase)
    >
    There is no formula to calculate downtime as it depends upon number of factors like system resources (RAM &CPU), no. of R3load processes, no. of background processes, Parameters tuning etc.
    Do a test upgrade on your sandbox system (copy of production system) to get idea of downtime required.
    Thanks
    Sunny

  • EHP4 upgrade query

    Dear All,
    We are planning to upgrade our PRD server. We are upgrading from  ECC 6.0 to EHP4 in dual stack (ABAP+JAVA).
    We are running cluster in Active Passive mode.
    DB + ASCS + APP server on node 1 and node 2 is for fail-over switch and one DI instance on node 2.
    We will disable clustering before the downtime phase.
    I am having the below queries.
    1.We are running ERS03 for abap and ERS 04 for java on node2.
    As per SAP Note 1012486 we should disable ERS before downtime phase.
    Please advice we have to only stop the instance ERS03 and ERS04 .As in cluster it is not configured.
    If we are running startsap command on node 2 it is starting ERS03 ,ERS04 and DI instance.
    Please advice how we can disable it
    .SAP Note 1012486
    If you have manually set up a standalone enqueue, you should
    revert this configuration prior to the execution of the
    downtime phases of the upgrade, latest prior to kernel switch
    phase. The upgrade tool is unable to detect a manual set up of
    standalone enqueue servers and, therefore, cannot update them.
    This might cause problems when the system is started for the
    first time after the kernel switch. This only applies to
    standalone enqueue servers (separately started enserver
    process), NOT to officially supported (A)SCS instances.
    2.As we are running ABAP+JAVA stack.
    As i checked in SDN.. somone suggested the below method to overcome profile issue's.
    Please help to understand this.
    If you have a SAP level clustering you will face issues while patching your JAVA instance as in profile directory JSPM/EHPi scans for the available profiles and the patches accordingly however when two profiles are found it runs itno conflicts and does not allow you to proceed further - To solve this problem as a workaround you need to move the other/mirror/clustered systems profiles into other directory asay /usr and once your EHPi installation is over move back other/mirror/clustered systems profiles into cdpro directory.
    3.ASCS will be required to be stopped manually.Will SAP prompt to stop or i need to do it before downtime phase.
    Regards,
    Sahil Garg

    Hello Sahil,
    I hope I've understand your questions right...
    1)
    I think you're right - to stop ERS03 + ERS04 but here you should contact the sap support - to make sure that this is not a big mistake.
    2)
    You should ensure, that only one profil should be available for the installer - so the installer searches for profiles and your mirror/clusterd systems have several [ more than one ] profiles.
    So you should "move the other/mirror/clustered systems profiles into other directory asay /usr "  - you have to move your profiles in a temporary directory [ tmp\ ] - so the installer didn't recognise them.
    After your EhP installation you have to move the profiles back to the source directory.
    3)
    The installer will prompt you - but downtime means that your colleagues are not able to work ...
    =>sure at all its a good think to make a reboot of the whole server - so you will see that there is everthing fine - profiles, executables etc.
    By the way - if it is your first EhP installation you should have one test-system - only for ehp.
    best regards

  • EHP4 Upgrade pahse REPACHK2

    Hi Gurus,
    I have recently installed ECC6 EHP4 ready on AIX environment. We decided to upgrade its ECC 6 components to ECC 6.04/EHP4. I am now in the phase REPACHK2. It show the message
    PREPROCESSING - Shadow System Installation
    Lock Development
    The development has to be locked now!
    After locking the development, no one can change any development object until the end of the process.
    The problem is the GUI seems freezed/Hang, I could not press back or next. On my research the next phase is LOCKEU_PRE to lock the system.
    Other details:
    1. I executed topas from the command line and it shows the running application JAVA CPU 90% usage Disk 80% usage. Now I could not tell whether the system is running the phase REPACHK2 or does it still wait for my input.
    2. I select high resource during the phase.
    3. SAPehpi LOG shows that im currently in REPACHK2 phase.
    Please advise what to do?
    Thanks in advance,
    Newbie

    Hi,
    Let me know yr hardward configurations.....!!
    Restart the EHPI process again. Again it stops, stop the installtion, restart the entire server again, and restart the installation.
    Regards,
    Rao.

  • EHP4 upgrade: Error in Phase ACT_UPG

    Hi All,
    While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
    Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
    Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
    ACT_UPG log:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "12"
    Log of SAPA-604DMINISPSCA.RH4
    1 ETP155 ACTIVATION OF DD-OBJECTS
    1 ETP101 transport order     : "SAPK-604DMINISPSCA"
    1 ETP102 system              : "RH4"
    1 ETP108 tp path             : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
    1 ETP109 version and release : "372.04.70" "700"
    1 ETP198
    3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
    1AEPU320 See job log"RDDMASGL""01260600""RH4"
    1 ETP155 ACTIVATION OF DD-OBJECTS
    1 ETP110 end date and time   : "20091012033215"
    1 ETP111 exit code           : "12"
    1 ETP111 exit code           : "12"
    Job RDDMASG log :
    Job cancelled with following log
    2.10.2009 01:26:07 Job started                                                               00           516          S
    2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)      00           550          S
    2.10.2009 01:26:08 Start of mass activation 01:26:08                                         AD           010          S
    when tried to log into shadow instance after getting error, it is giving error
    RH4: system message
    work process restarted; session terminated;
    we restarted shadow system. There is no dumps in the shadow system.
    Work process getting killed after 7800s
    checked in work directory of Shadow system:  devdisp log :_*
    Mon Oct 12 04:49:46 2009
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
    ***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c   12639]
    DpStartStopMsg: send start message (myname is >HW136799_RH4_22                         <)
    DpStartStopMsg: start msg sent
    Warning: Swap space is configured quite small with 20477 MB.
    It should be configured with at least 20 GB on 64 bit systems.
    See note 153641 for more information.
    Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
    Minimum value is 8192 MB.
    Recommended size is 75 % of RAM + swap.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Mon Oct 12 04:49:47 2009
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 221
    Release check o.K.
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Mon Oct 12 06:57:01 2009
    ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c   15776]
    child (pid=9769) killed with signal 7
    Mon Oct 12 06:57:43 2009
    ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c   15776]
    child (pid=9768) killed with signal 7
    Please let us know what needs to be cheked for the problem
    Thanks,
    Ramesh Ramagowni

    Hi Markas and All,
    Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
    After upgrade, SAP_AP component still showing as 700
    SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
    Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
    Also while trying to move some datafiles using brtools after upgrade we are getting following error,
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
    BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
    c
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
    BR0253E errno 13: Permission denied
    BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
    BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
    There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
    Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
    Thanks,
    Ramesh R

  • EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG

    Hi!
    I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
    The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
    The error I get is:
    CURRENTPHASE PREP_INPUT/KX_CPYORG
    ...started at 20090320163915
    Using phase log file 'KX_CPYORG.LOG'.
    Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
    Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
    ...begin dialogue at 20090320164430
    How can I solve this problem?
    Thank you very much!
    regards
    Ju00FCrgen

    Hi
    Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
    Best regards
    Mischa

  • ABAP Dump After EHP4 Upgrade "SYNTAX_ERROR"

    Hello
    I performed ERP ECC 6.0 to EHP4 upgrade. System is working fine, Support Package stacks at maximum level, kernel, tp and R3trans is up-to-date. Only problem is I am getting "SYNTAX_ERROR" every minute. What could be the reason?
    Runtime Errors         SYNTAX_ERROR                                                            
    Date and Time          15.03.2010 16:10:28                                                                               
    Short text                                                                               
    Syntax error in program "CL_HTTP_SERVER_NET============CP ".                                                                               
    What happened?                                                                               
    The following syntax error occurred in the program                                        
          CL_HTTP_SERVER_NET============CP :                                                       
         "Method "SET_SSO_MANDATORY" is not declared or inherited in class "CL_H"                                                                               
    What can you do?                                                                               
    Please eliminate the error by performing a syntax check                                   
         (or an extended program check) on the program "CL_HTTP_SERVER_NET============CP           
    You can also perform the syntax check from the ABAP/4 Editor.                             
         If the problem persists, proceed as follows:                                                                               
    Error analysis                                                                               
    The following syntax error was found in the program                                       
          CL_HTTP_SERVER_NET============CP :                                                       
         "Method "SET_SSO_MANDATORY" is not declared or inherited in class "CL_H"                                                                               
    Information on where terminated                                                                   
        Termination occurred in the ABAP program "SAPLHTTP_RUNTIME" - in                              
         "HTTP_DISPATCH_REQUEST".                                                                     
        The main program was "SAPMHTTP ".                                                                               
    In the source code you have the termination point in line 124                                 
        of the (Include) program "LHTTP_RUNTIMEU02".                                                                               
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    94     ELSE.                                                                               
    95 *                                                                               
    96 * create a server control block for internal communication type of ICF                      
        97 *                                                                               
    98       CREATE OBJECT c_server_par TYPE cl_http_server_par.                                   
        99       c_server_par->set_local_server_name(                                                  
       100                       EXPORTING name = client_name                                          
       101                       EXCEPTIONS name_already_exists = 1 ).                                 
       102       c_server    = c_server_par.                                                           
       103 *      server_type = 2.                                                                     
       104                                                                               
    105 * insert server to server instances, only in case of stateful session                       
       106       server_instances-server      = c_server.                                              
       107       server_instances-client_name = client_name.                                           
       108     ENDIF.                                                                               
    109   ENDIF.                                                                               
    110                                                                               
    111 *                                                                               
    112 * create server control block, if not happen before                                             
       113 *                                                                               
    114   IF c_server IS INITIAL.                                                                       
       115                                                                               
    116     IF NOT server_accepted IS INITIAL AND                                                       
       117 *           server_accepted_type = 1.                                                           
       118        server_accepted->m_server_type =                                                         
       119            cl_http_server=>co_servertype_net.                                                   
       120 *   use last server object created for stateful communication                                   
       121       c_server_net ?= server_accepted.                                                          
       122     ELSE.                                                                               
    123 *   create a server control block for network communication type of ICF                         
    >>>>>       CREATE OBJECT c_server_net TYPE cl_http_server_net.                                       
       125     ENDIF.                                                                               
    126 *   accepted server control block called via network                                            
       127     c_server    = c_server_net.                                                                 
       128 *    server_type = 1.                                                                               
    129 * register network server for HTTP auto logout (timeout handler )                               
       130     server_accepted_org = c_server.                                                             
       131   ENDIF.                                                                               
    132                                                                               
    133 * for local execution use VIRTUAL_HOST parameter                                                
       134   IF NOT document_in IS INITIAL.                                                                
       135     cl_http_server=>c_virtual_host = virtual_host.                                              
       136   ENDIF.                                                                               
    137                                                                               
    138 *                                                                               
    139 * register accepted server control block for responses of network                               
       140 * server_accepted is used in function modules HTTP_CONFIRM_USERSWITCH                           
       141 * and HTTP_GET_CURRENT_SERVER_CB                                                            
      142 *                                                                               
    143   IF server_accepted IS INITIAL.                                                                               
    Internal notes                                                                               
    The termination was triggered in function "ab_genprog"                                         
         of the SAP kernel, in line 1584 of the module                                                  
          "//bas/701_REL/src/krn/runt/abgen.c#6".                                                       
         The internal operation just processed is "ABOO".                                               
         Internal mode was started at 20100315161028.                                                   
         Program name.........: "CL_HTTP_SERVER_NET============CP ".                                    
         Error message........: "Method "SET_SSO_MANDATORY" is not declared or inherited                
          in class "CL_H".

    Hello Kaan,
    Please try this workaround:
    1) se24
    2) put the class name "cl_http_server_net"
    3) create a new method "SET_SSO_MANDATORY"
    as instance methid and "visibility" private
    Regards
    Niraj
    Edited by: Niraj Kumar Soni on Mar 15, 2010 8:24 PM

  • SAP R/3 4.6B to ECC6 EHP4 Upgrade

    Hello,
    We are on SAP R/3 4.6B and are in the process/plan of Upgrading to ECC 6...
    Is it possible to directly go to EHP4 in a single downtime..?
    I am trying to finf the Source/DVD's from the market place but unable to locate one...
    Is it possible or should we go to EHP3 only?
    If someone has link/path for the software download , kindly help...
    Thanks,
    RaHuL...

    [http://service.sap.com/swdc|http://service.sap.com/swdc]
    - download
    - Installations and upgrades
    - installations and upgrades - Entry by Application Group
    - SAP Application Components
    - SAP ERP
    - SAP ERP Enhance Package
    - EHP4 for SAP ERP 6.0 / NW 7.01
    Here you should read the info page carefully.
    Download the Master Guide and read it to find out about how to perform the upgrade.
    - Installation and Upgrade
    - <Database Platform>
    There is your media. Please note that it is both Installation and upgrade media
    and also both ERP and SRM media
    In order to get the kernel etc you have to select (instead of "Installation and Upgrade --> Database Platform")
    - SAP EHP1  FOR SAP NETWEAVER 7.0
    - Installation and Upgrade
    - <Operating System>
    - <Database Platform>
    There is your media together with installation and upgrade for the Netweaver platform (used when upgrading BI etc).
    Please note that you also need the Maintenance Optimizer configured in Solution Manager in order to download
    (actually you approve them for download) support packages etc from the Service Marketplace.

  • /ASU/UPGRADE after the ECC6.0 EHP4 upgrade Finalization step

    Hello all,
    Needed some information on the ASU step in Postprocessing phase of the upgrade. We are upgrading form 4.7 to ECC 6 EHP4 and we are in the Postprocessing phase. The current step is to perform the /ASU/UPGRADE, and I wanted to know if I need to stop te upgrade to perform this step or I can proceed with the rest of the Post processing and Finalization phase and still do the /ASU/UPGRADE step. Please advice ASAP.
    Thanks
    Deepak

    Hello,
    we are in upgrade to ECC 6.0 EHP4 too and now at phase ASU/UPGRADE.
    Note 1000009 advices to make adjusments in client 000, but we are working in client 100. And the procuced task list is client-dependent. So things like budget period or wage types are usually in working client.
    Which is the correct client to use?
    Regards,
    Julia

  • EHP4 upgrade stucl in MAIN_SHDRUN/ACT_UPG

    Hello Dear,
    We are in the proces of upgrading from ECC 6 EHP3 to ECC6 EHP4 on Windows 2003 x86_64 bit platform with Oracle 10.2.0.4
    Currently the Upgrade is in MAIN_SHDRUN/ACT_UPG for more than 18+ hours. Our DB size is 175G
    I can see that tp.exe process is running and the logs has been recently updated(Gets updated every 20-30 minutes)
    Can you please take a look at the log and tell us what's going on with the system.
    We have to get it ready in 2 days but we are stuck in this phase.
    THis phase failed earlier after running 2 hours so I had changed the value of of
    abap/heap_area_dial = 4000000000
    abap/heap_area_nondia = 4000000000
    I have read other posts but I don't see any short dumps and system messages in my shadow instance.
    PLease suggest what should I do.
    Should I just go head and stop shadow instance from mmc and modify the the parameters as per note 1387739
    please suggest.
    Here is last few lines from my log.
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO802XAktivierung Tabellentyp "SHP_SHIPMENT_REQUEST_REQU_TAB3"
    4 DDO113 Durchzuführende Aktionen für Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO802XAktivierung Tabellentyp "TPOTA_HOTEL_AVAIL_OUTPUT_TAB92"
    4 DDO113 Durchzuführende Aktionen für Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO802XAktivierung Tabellentyp "TPOTA_HOTEL_AVAIL_OUTPU_TAB101"
    4 DDO113 Durchzuführende Aktionen für Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO811XAktiviere abhängigen Tabellentyp "TPOTA_HOTEL_RES_OUTPUT_RAT_TAB"
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO811XAktiviere abhängigen Tabellentyp "TPOTA_HOTEL_RES_OUTPUT_RO_TAB2"
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO811XAktiviere abhängigen Tabellentyp "TPOTA_VEH_RES_OUTPUT_VEH_R_TAB"
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO811XAktiviere abhängigen Tabellentyp "TPROOM_STAY_TYPE_RATE_PLAN_TAB"
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO811XAktiviere abhängigen Tabellentyp "TPROOM_STAY_TYPE_RATE_TAB"
    4 DDO115 Anpassung als Abhängige: "activate," "ABAP timestamp," "DYNP timestamp" " "
    3 DDO802XAktivierung Tabellentyp "TPVEH_VENDOR_AVAIL_TYPE_V_TAB2"
    4 DDO113 Durchzuführende Aktionen für Abhängige: "ABAP timestamp," "DYNP timestamp" " " " "
    3 DDO802XAktivierung Tabellentyp "UMB_ESAX_T_BSCP_BSCQ"
    3 DMC738XAktiviere View "VV_TCACS_OBJMET1"
    3 DMC738XAktiviere View "VV_TCACS_OBJMET2"
    3 DMC738XAktiviere View "VV_TCACS_OBJMET3"
    3 DMC738XAktiviere View "VV_TCACS_OBJMETH"
    3 DDO525XAktiviere abhängigen View "VV_TCACS_PCACT_AK"
    3 DDO525XAktiviere abhängigen View "VV_TCACS_PCACT_AL"
    2 ED0348XServer Usage ************************************************************
    2 ED0313 Server..............|Workp|Tasks|Error|.Timesum|Objcount|ms/Obj|..KCosts|ms/KCs
    2 ED0313 -
    2 ED0313 RPBVA4006_SE2_30....|....2|....6|.....|...1.110|.....520|.2.135|.....488|.2.275
    2 EDO678 Parallel execution: "566" sec., Phase out time: "22" sec., Load: "9,8056537102473499E+01" percent
    1 EDO533X*** Activate objects at level "15"
    3 EDO631 * Parallel execution with maximal "2" concurrent tasks *
    3 EDO677 Total of "317" objects with &3"303.260" costs in &2"5" tasks
    Thanks,
    Mandeep

    Hello,
    I wanted to update you with the some current values of memeory parameters in my system:
    abap/heap_area_total = 26214400
    abap/heap_area_nondia = 4000000000
    abap/heap_area_dia    = 4000000000
    abap/roll_extension    = 4000000000
    ztta/roll_area = 3000000 - default
    Please suggest If I can stop the shadow instance/upgrade process and make any changes to the memory
    My physical memory is 12G on my VM
    As per note 1387739 recommended values are:
    abap/heap_area_total = 5000000000
    abap/heap_area_nondia = 5000000000
    ztta/roll_area = 10000000
    Unfortunately earlier I did not find this info. So Can I no stop and change the values.
    Thanks!!
    PLease help.

Maybe you are looking for