EhP5 and MDG
I have a question around EhP5 and MDG.
Looking at this note, is this SP03 specific to only MDG or are these the notes related to MDG changes in SP03 (which is bundled with other non-MDG related EhP5 SP03 changes)?
Note 1541825 - Master Data Governance Ehp5 SP03: Release & information note
Wondering if MDG related upgrades and fixes can be applied separately or are they bundled together with all of Ehp5 upgrades and fixes. (meaning they all need to go in together)
And finally, Can an SAP ECC system with Ehp5 & MDG replicate to another ECC system with EhP4?
Hello CHRIS
First of all SAP MDM and SAP ERP are a different products.
SAP provided some business packeges for MDG.
For MDG packages installation follow installation instructions from here:
http://wiki.sdn.sap.com/wiki/display/SAPMDM/SAPMasterData+Governance
You can't replicate Ehp5 & MDG to another ECC system with EhP4.
Regards
Kanstantsin Chernichenka
Similar Messages
-
New Appraisal system using EHP5 and NWBC
Hello Experts,
Can we implement new appraisal system using EHP5 and NWBC client without a portal?
Sorry, i am raising this question again But after finding out that the new ESS works without portal using NWBC, i was wondering if the same is applicable to appraisal systems as well?The only changes in PMS in EHP5 pertain to the pre-defined template. If you are using (as is most likely) the flexible template in your implementation, there is no relevant enhancement in EHP5.
-
SAP Vendor Number and MDG Business Partner mapping table name
Hello Expert,
We are using MDG for Materials and Suppliers, while using we found some times error on vendore number and business partner mis-matching.
Could you please tell me which table I should check where I can see ECC vendor number with MDG business partner number.
It will help us to validate the wrong mis-matched one to correct in one go.
Regards,
Vijay MittalHello Vijay,
You can find the Vendors in table LFA1. Your Business Partners are in table BUT000.
The number ranges transactions are as follows: Vendors - XKN1, Business Parners - BUCF
You should check the NR Status and make sure your value is greater than the last created LFA1 record, so your PPO does not fail (that's in case you're going the direction BP -> Vendor and don't have the "Same flag" active in view V_TBC001). If you are trying to synch up from Vendor to BP, you'll have to check the view CVIV_VEND_TO_BP1 instead.
Hope that helps,
Boris -
Hello Experts,
Would any of you advise on upgrade to Ehp5. We use best practices for HCM and was applied on Ehp3 which we later upgraded to Ehp4. I'm wondering if there is aything to watch for when we upgrade to Ehp5.
Thank you.Dear,
By upgarding to EHP5 all the funcitionalities of EHP4 will remain same, But you have been provided with other new functionalities, So if you want to use the new functionaliies, then you can activate the corrosponding Business functions.
Rest other things should be similar.
Best Regards,
Deepak. -
Hey everybody,
i was told that in EHP5 will be a tool included that will visualize the organsational structure out of PPOME much better than the current one.
Can anybody verify this information? How do you export organsational data out of SAP and what solution do you use?
Thanks for answers.
KR
André C. Winter
SAP HR Consultant
E. Breuninger GmbH & Co.
Marktstr. 1-3
70173 StuttgartHi Andre,
Nakisa (TVN 1.1 and TVN 2.0) provides the excellent view of organisation chart. Also has the other modules like Org chart modelling, succession planning etc.
Latest Enhancement package relase as per my knowledge is EHP4.
Thanks!
Regards,
Chetan -
Hi
I have seen the new functionality around mass approval of leave requests in EHP5. Unfortunately only on paper. My question is:
The list that is presented to the manager: Does it represent records from the leave request database, or does it represent individual workflow task - or a combinaton of the 2?
Thanks in advance
Kirstenyes it does involve WF also and also read the sent status of the requests from leave request database and displays it to intended approver.
ie
http://help.sap.com/erp2005_ehp_05/helpdata/en/e6/c4fb025b4542fcaa6241e9
e5060323/frameset.htm.
For leave request application to be called , we specify the parameters
in transaction SWFVISU through which the application is called when
processed from universal worklist.
I request you to use standard leave request task TS21500003 and please
replace the existing visualization parameter DYNPARAM from
WI_ID=${item.externalId} to
LRF_REQUEST_ID=${item.REQUESTID}. This can be done from transaction
SWFVISU. -
Dear All,
I awanted to pass SAP NetWeaver Master Data Management 7.1. Is there any links where I can read the number of questions, tests and available tutorials?
best regards,
YerzhanHi,
please check the below thred for all information.
http://scn.sap.com/thread/659413
http://scn.sap.com/thread/1398888
Regards
srinivas -
SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5
hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
JunHi Jun,
You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
Regards,
Srikishan -
MD04 and CO09 are not matching after EHP5 upgrade
Hi all,
we have changed to ECC6 EHP5 and now we have the following problem:
When we are using transaction CO09 we are not able to see old purchase orders.
When we are going into the purchase order and change the quantity, they will appear in the CO09.
In MD04 everything looks like befor the EHP upgrade.
Any ideas?
Kind Regards
Dirk
Edited by: Dirk Drössel on Jul 20, 2011 12:35 PMThanks a lot, that was the solution.
Regards
Dirk -
MDG - Material and Financial Data Models
Hi,
Can anyone help me to get standard business content as per latest version for MDG-Material and MDG-Financial Data Models.
Thanks,
NarendraPlease go through the below link it talks about all the latest updates.
Configuration and Enhancement of SAP Master Data Governance -
KE30 and KKO0 hang after EHP5 enhancement pack implementation
We implemented EHP5 and now KE30 and KKO0 hang up when we double-click on a report. We tried to run RKD_REGENERATE_ALL_REPORTS and that hangs as well. We've searched SDN and SAP notes but can't find anything - any ideas????
Yes, we did enter a customer message and SAP was able to resolve this. During our EHP5 enhancement pack implementation, for some reason the kernel file abap.pad only got copied to our central SAP instance and not any of our other dialog servers. Once we copied the newest version of abap.pad to all of our servers, everything works fine.
-
My question is on MDG -
Is the standard data model for GL account, profit center already configured in the package? As in SAP MDM there are standard data models (sca files) which we can import, is it something similar in there?
Second question is - When the vendor gets accessed through portal in MDG, can a user enter in ECC and access the same vendor? I mean does it get locked for other users to access the same vendor in ECC?
Thanks,
IndraveerHi folks
I have following queriers:
1. When MDM is in Scope, How feasible is to opt MDG also.I mean what points we can raise so as to convience the client that we wud also need MDG.
2.How is MDG different in Standalone or with ECC Suite.
3. If both are in scope How is the integration between MDM and MDG happens.
Regards
Lakshmi -
ECC6 shutdown : CIF deactivation and CIF reactivation ?
Hello,
We are running SAP ECC6 EHP5 and SAP SCM 7.02/Live Cache 7.9.
I am a sap basis guy, and it is quite difficult to perform any maintenance on ECC6 which would require a shutdown ( parameter change, kernel update, memory adjustment, ...) because of the impact it has on the CIF
I just wanted to share with you our current procedure just to determine if it is indeed a common practice.
I understand that similar issues have already been discussed on sap scn threads, but most of them concern SCM/APO shutdown, like here :
How to handle CIF before we try to apply Service Packages to SCM?
I could not find any note, best practice regarding ECC6 shutdown
So, whenever we stop the ECC6 ssytem , we need to run a CIF-DEACTIVATION job, which consists of the following steps :
No. Program name/command Prog. type Parameters
1 RIMODAC2 ABAP DEA_ATP_CHECK
2 RIMODAC2 ABAP DEA_ATP_BATCH
3 RIMODAC2 ABAP DEA_ATP_STOCK
4 RIMODAC2 ABAP DEA_ATP_SALESO
5 RIMODAC2 ABAP DEA_ATP_PURCH
6 RIMODAC2 ABAP DEA_ATP_MATERI
7 RIMODAC2 ABAP DEA_ATP_PLANTS
This usually takes one hour.
And then after ECC6 system is restarted , we run the CIF-REACTIVATION job which consist of the following steps :
No. Program name/command Prog. type Parameters
1 RIMODGEN ABAP ATP_PLANTS
2 RIMODGEN ABAP ATP_MATERIALS
3 RIMODGEN ABAP ATP_PURCH_ORDS
4 RIMODGEN ABAP ATP_SALESORDER
5 RIMODGEN ABAP ATP_STOCK
6 RIMODGEN ABAP ATP_BATCHES
7 RIMODGEN ABAP ATP_CHECK
8 RIMODAC2 ABAP ATP_PLANTS
9 RIMODAC2 ABAP ATP_MATERIALS
10 RIMODAC2 ABAP ATP_PURCH_ORDS
11 RIMODAC2 ABAP ATP_SALESORDER
12 RIMODAC2 ABAP ATP_STOCK
13 RIMODAC2 ABAP ATP_BATCHES
14 RIMODAC2 ABAP ATP_CHECK
15 RIMODDEL ABAP ATP_ALL
16 RAPOKZFX ABAP ATP_GATP
17 RCIFIMAX ABAP ATP_GATP
18 RDELALOG ABAP ATP_GATP
This takes 7 hours !!!
I am starting to suspect that we might not be doing the "right thing", but I am definitely not an APO expert.
Could you please kindly share your practices, thoughts ?
Thanks and RegardsHI Raoul,
No need to activate and de activate CIF when ever you stop ECC system.
Reason is you will send data to APO only When ECC is not available i.e., RFCs not working then you will set up the connections and do data transfers.
Check any data transfer is happening by directly/batch. Postpone those activities..
Prior to shut down ECC/SCM send remainders to users that the systems will not be available.
Use these 2 programs from SCM side when you have stopped ECC.
RSTRFCQ1 : Stop Outbound Queue
RSTRFCQ3 : Restart Outbound Queue.
In our project we have to postpone/stop the jobs for data transfers between ECC and APO.
However you will be having daily CIF jobs to make ECC and APO in synch. So, once you re start your ECC regular CIF jobs will activate new objects(master and trnasaction data) and will deactivate lod data.
Thanks,
Bala. -
BAPI for Maintenance Plan Scheduling with EHP5
Hello.
In documentation for LOG_EAM_CI_4 mentioned that: [API functions have been developed for the scheduling of maintenance plans. These APIs provide the same functions as transaction IP10: the creation of maintenance calls or the changing of existing maintenance calls|http://help.sap.com/erp2005_ehp_05/helpdata/EN/33/46AC67364447A3BA2F4EFA65B8C014/frameset.htm].
We have activated EHP5 and all LOG_EAM_CI* business functions in our system, but still can't find this "magic" BAPI.
Does anybody know its name?
BR,
Pavel
Edited by: Pavel Nedvijaev on Nov 7, 2011 5:37 PMMaheswaran.K thanks for your reply, but as i wrote above we have activated all LOG_EAM_CI* including LOG_EAM_CI_3.
Version of software components SAP_APPL, EA-APPL is 605 as it needed. -
Production and Development in Different Networks.
Hi Experts,
I have installed SAP ECC 6.0 DEV with EHP5 and Solution Manager in one Network Landscape i.e under one live ip. PRD is not yet installed. My SAP Router is running on Solution manager. Now i have a situation here. The client now wants " only the PRD server installed and shifted to a datacenter" where he will buy a new live ip with a specifed bandwidth. Now my query is if this is the case how do i connect DEV and PRD servers which will be geographically apart. And how do i configure SAP OSS connection to PRD as my router is in defferent landscape. How will the stms be configured for the developments and customizations to move to PRD. Please let me know what kind of Network activity I have to take care of.
P.S
Any information on installation of servers on VMware please let me as we are considering evern that as an option.
Regards,Rahul
I am not sure what you mean Geographically apart
If you mean they are in different domain there is an option to create domain link
STMS --> Overview --> System --> System --> Create --> Domain Link
If they are not connected by network i am not sure if you can do much
Cheers !
Manish
Maybe you are looking for
-
I am nearly in tears. Can't install online version of CS2...
I am nearly in tears. About three weeks ago my hard drive died. I have a new hard drive and am wishing to install my CS2 Premium, which perfectly serves my needs. The disks no longer work with the original activation number so you are directed to the
-
Invoice posted in 2006 by mistake, no accounting document generated
Dear Expert The user created an invoice by mistake on today's date , but billing date was 2006. as the periods are closed , it did not create any accounting document. now when the user realized his mistake he made cancellation of the invoice in the s
-
To view FI Vendors with Pymnt Terms and the associated Expense GL Account
Hi, Is there any report that brings FI Payment Terms from vendors along with the associated G/L EXPENSE accounts ? How can I bring such information? Any help is very welcome. Regards Roger Edited by: rogersapfinance on Nov 10, 2009 9:21 PM Edited by:
-
How to include a .lvlib in a build that was created using a custom .dll
I am trying to build an executable in LV2010 that uses a .lvlib that was created using a .dll from Keyence. I have added the .lvlib to the source files as "Always Included" and I have also added all of the .vi files of the library to "Always Included
-
My Safari Windows will not close
My safari windows will not close. I can use the internet fine, but safari will not allow me to close or minimize the window. This is also stopping me from shutting down my computer without removing the battery. Should I take it in to get repaired, or