EhP5 Install Failed in START_SHDI_FIRST - can't start the shadow instance
We are in the process of upgrading our ERP system from EhP4/NW701 to EhP5/702. The current phase is MAIN_SHADOW/START_SHDI_FIRST. SAPehpi is having problem starting the shadow instance. We tried to manually stop and start it as well, but of no help. The log files 'STARTSFI.LOG' and 'DEVTRACE.LOG' don't seem to provide any useful information. I looked through the files under the work directory for the shadow instance and still couldn't find any helpful information. Where else should I look? Please help!
Thanks,
Jonathan Yun
Hi Srikishan,
Thanks for your reply. dev_disp didn't show much helpful information. However, dev_w0 did show error that I didn't except to see.
Do you know if EhP5 installation require oracle 11g client to be installed?
We ran into a problem at the beginning of the installation where /usr/sap/put/EHPI/abap/exe/dboraslib.o couldn't be loaded because it was looking for symbol strcat. We did a dump of the header for it (dboraslib.o) and saw it reference oracle 11g client so we put the 11g client libraries out there for it to reference but didn't officially install it and change the libpath for the original system. And now, dev_wo is complaining about not able to load /usr/sap/put/EHPI/abap/exe/dboraslib.o because it couldn't find strcat from the 10g client. I tried manually changing the libpath so the 11g client path appears before the 10g client path and stop and start the shadow instance manually. However, no matter what I set the libpath to, the error is the same.
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/put/EHPI/abap/exe/db
oraslib.o") FAILED
" 0509-130 Symbol resolution failed for /usr/sap/put/EHPI/abap/exe/dborasl
ib.o because:
0509-136 Symbol strcat (number 149) is not exported from
dependent module /oracle/client/10x_64/instantcl" (errno=8,E
xec format error) [dlux.c 445]
B *** ERROR => Couldn't load library '/usr/sap/put/EHPI/abap/exe/dboraslib.o'
[dbcon.c 5632]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1487]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c 11295]
Thanks,
Jonathan Yun
Similar Messages
-
Urgent: cannot start the shadow instance at phase STARTSAP_TRANS
We are upgrading to NW2004s (ABAP only) from 640.
<u><b>How to re-start the shadow instance?</b></u>
At this point, <b>anyway we cannot start the shadow instance.</b>
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
<b>The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]</b>
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
<b>The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]</b>
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:20:45 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since Mar 22, 2007 1:20:49 PM
> MOUNT POINT 12 = D:\D12\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 23 = D:\D23\51032247
> MOUNT POINT 18 = D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
> MOUNT POINT 15 = D:\D15\NW_2004s_SR2_Upgrade_Master
> MOUNT POINT 09 = D:\D9
> MOUNT POINT 14 = D:\D14\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 01 = D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 08 = D:\D8\SAP_CRM_5.0_SR2_Languages
> MOUNT POINT 20 = D:\D20\NW_2004s_SR2_Languages
> MOUNT POINT 03 = C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 06 = C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 10 = D:\D10
> MOUNT POINT 17 = D:\D17\51032257
> MOUNT POINT 21 = D:\D21\NW_2004s_SR2_Languages
> MOUNT POINT 19 = D:\D19\51032257
> MOUNT POINT 05 = C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 04 = C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 11 = D:\D11\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 07 = D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
> MOUNT POINT 24 = D:\D24
> MOUNT POINT 02 = C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 22 = D:\D22\NW_2004s_SR2_Languages
> MOUNT POINT 16 = D:\D16\BS_2005_SR2_SAP_Installation_Master
> MOUNT POINT 13 = D:\D13\SAP_CRM_5.0_SR2_Installation_Export
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:24:47 PM
> cancel
Connection to SAPup was closed
Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:28:34 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
Reading data from "Upgrade Master CD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:43 PM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:50 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:28:54 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:28:56 PM
> Parameter input initial yes
You selected the following PREPARE modules:
Parameter input
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since Mar 22, 2007 1:28:59 PM
> execute
Execution of PREPARE module Parameter input begins at 20070322142901
>> 14:29:01 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 14:29:01 PREPARE: END OF PHASE BEGIN_PRE
>> 14:29:01 PREPARE: START OF PHASE KEY_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 961511
? SAPup keyword =
Waiting for input since Mar 22, 2007 1:29:02 PM
> SAPup keyword = 19327784
>> 14:37:23 PREPARE: END OF PHASE KEY_CHK
>> 14:37:23 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
Done.
>> 14:40:10 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 14:40:10 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:40:10 PM
> INSTANCE NUMBER = 59
> SAP SYSTEM HOST = damascus
> SAP SYSTEM ID = ADC
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since Mar 22, 2007 1:43:59 PM
> DATABASE HOST = damascus
> DATABASE ID = ADC
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since Mar 22, 2007 1:44:03 PM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since Mar 22, 2007 1:44:14 PM
> BATCH HOST = damascus
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since Mar 22, 2007 1:44:16 PM
> R3TRANS PROCESSES = 3
> MAXIMUM SYNC TIME = 120
> MAXIMUM UPTIME PROCESSES = 1
The password for Operating System account .\SAPServiceADC:
? PASSWORD =
Verification of the password for Operating System account .\SAPServiceADC:
? PASSWORD =
Waiting for input since Mar 22, 2007 1:44:19 PM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 14:44:43 PREPARE: END OF PHASE INITPUT_PRE
>> 14:44:43 PREPARE: START OF PHASE DBCHK_PRE
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since Mar 22, 2007 1:44:45 PM
> no
>> 14:44:49 PREPARE: END OF PHASE DBCHK_PRE
>> 14:44:49 PREPARE: START OF PHASE CONFCHK_IMP
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:44:50 PREPARE: END OF PHASE CONFCHK_IMP
>> 14:44:50 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since Mar 22, 2007 1:44:50 PM
> continue
? SAP Solution Manager Key =
Waiting for input since Mar 22, 2007 1:44:53 PM
> SAP Solution Manager Key = 12D8B10981
>> 14:45:14 PREPARE: END OF PHASE SOLMAN_CHK
>> 14:45:14 PREPARE: START OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: END OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: START OF PHASE HIAV_CHK
>> 14:45:14 PREPARE: END OF PHASE HIAV_CHK
>> 14:45:15 PREPARE: START OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: END OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: START OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: END OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: START OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: END OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: START OF PHASE INIT_CBU
>> 14:45:15 PREPARE: END OF PHASE INIT_CBU
>> 14:45:15 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20070322144515
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Parameter input' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:45:15 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:45:23 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:45:26 PM
> Initialization initial yes
You selected the following PREPARE modules:
Initialization
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:45:30 PM
> execute
Execution of PREPARE module Initialization begins at 20070322144532
>> 14:45:32 PREPARE: START OF PHASE INITCURENV
>> 14:45:32 PREPARE: END OF PHASE INITCURENV
>> 14:45:32 PREPARE: START OF PHASE DBCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:45:34 PREPARE: END OF PHASE DBCHK_INI
>> 14:45:34 PREPARE: START OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: END OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: END OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: END OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: START OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: END OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
>> 14:46:00 PREPARE: END OF PHASE DBCONNCHK_INI
>> 14:46:00 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: START OF PHASE UCMIG_DECISION
Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
Upgrade and Unicode Conversion.
In this case, several of the migration preparation steps can be done already on the start release
or on the upgrade shadow system.
For further information, please refer to OSS note 928729.
Do you want to perform a combined Upgrade and Unicode Conversion?
? Yes
? No
Waiting for input since Mar 22, 2007 1:46:06 PM
> No
>> 14:48:04 PREPARE: END OF PHASE UCMIG_DECISION
>> 14:48:04 PREPARE: START OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: END OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: START OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: END OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: START OF PHASE INTCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
>> 14:48:15 PREPARE: END OF PHASE INTCHK_INI
>> 14:48:15 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 14:50:38 PREPARE: END OF PHASE ADJ_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: END OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: END OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: START OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: END OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: START OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: END OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 14:50:38 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 14:50:39 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 14:50:39 PREPARE: END OF PHASE SPACECHK_INI
>> 14:50:39 PREPARE: START OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: END OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: START OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: END OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: START OF PHASE EXECCV
>> 14:50:44 PREPARE: END OF PHASE EXECCV
>> 14:50:44 PREPARE: START OF PHASE EXECAV
>> 14:50:50 PREPARE: END OF PHASE EXECAV
>> 14:50:50 PREPARE: START OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: END OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: START OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: END OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: START OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: END OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: START OF PHASE ADDON_SPEC1
>> 14:50:55 PREPARE: END OF PHASE ADDON_SPEC1
>> 14:50:56 PREPARE: START OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: END OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: START OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: END OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: START OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: END OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: START OF PHASE ACE_CHK
>> 14:51:01 PREPARE: END OF PHASE ACE_CHK
>> 14:51:02 PREPARE: START OF PHASE CRM_BILL
>> 14:51:02 PREPARE: END OF PHASE CRM_BILL
>> 14:51:02 PREPARE: START OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: END OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20070322145102
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Initialization' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:51:02 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:51:41 PM
> continue
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:51:41 PM
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:58:46 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:58:53 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:58:56 PM
> Import initial yes
You selected the following PREPARE modules:
Import
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:59:00 PM
> execute
Execution of PREPARE module Import begins at 20070322145902
>> 14:59:02 PREPARE: START OF PHASE REQIMPORT
The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:59:02 PM
> continue
>> 14:59:05 PREPARE: END OF PHASE REQIMPORT
>> 14:59:05 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
Trying to find archive files ...
Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
>> 14:59:40 PREPARE: END OF PHASE READDATA
>> 14:59:40 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
>> 14:59:41 PREPARE: END OF PHASE READDATA_EXT
>> 14:59:41 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
>> 14:59:42 PREPARE: END OF PHASE TOOLFIX_CHK
>> 14:59:42 PREPARE: START OF PHASE CPYFIL0_CBU
>> 14:59:42 PREPARE: END OF P -
Not able to start the shadow instance in java only system
Hi All,
we are upgrading our portal system from 7.0 to 7.3EHP1 in oracle with HP-UX OS. We have started the upgrade and currently is in deploy shadow instance step of per-processing phase.we are getting error in deploy shadow instance step as below.
====================================================
Could not update components. Deployment of queue Queue_2014.07.17 at 17:00:17 completed with error Deployment error. See log /download/SUM/sdt/log/SWITCH/deploy_api.0.log for details. java.lang.RuntimeException: com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started. com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started.
===========================================================
We have observed that, shadow instance service only is not running. we tried to start the shadow instance services manually, same failing again .Only shadow central instance services(SCS) came up and running .Still shadow service is not coming up.
Please find the shadow instance service status.
==========================================================
epqas:eq1adm 50> sapcontrol -nr 02 -function GetProcessList
18.07.2014 01:48:11
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
jstart, J2EE Server, GRAY, Stopped, , , 14997
epqas:eq1adm 51>
===========================================================
Kindly find the attached deploy shadow instance log and shadow work directory files. Please suggest me, if you came across this issue.
Kubendran Aplease remove the archive, because if you use cache_archive, you can not use archive at same time for the same jar file.
Cooljavaus -
I've installed Premiere Pro, but can't start the program.
I have a subscription to creative cloud, and I've installed Premiere Pro CS6 but the app isn't clickable so therefore I can't even open the program.
How do I troubleshoot this to get the program to work?Thanks for your consideration. I apologize for being so vague. I'll try again.
After installing the creative cloud desktop app on my computer,
Windows 7 Enterprise Service Pack 1 32 bit
AMD Phenom II X6 3.20 GHz
8 GB RAM
I click on the little creative cloud icon at the bottom,
When the popup of my apps appears, I see Premiere Pro has been installed.
I can click (the hand icon appears in place of the regular pointer arrow) on the Illustrator CC icon and the program starts and I can create something.
If I hover over the Premiere Pro CS6 icon, My pointer does not change into the hand icon (which means something underneath is clickable) and I am not able to start the program.
I though there may have been a problem in the installation so I tried uninstalling all apps, then uninstalling the creative cloud desktop app, and just reinstalling Premiere Pro. This did not work. Then I installed Illustrator so see if any other programs would work.
My next step it to try re-installing my operating system.
Thanks for considering and reading this post! -
Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks.
SvenProblem solved. Copied latest file of iTunes Library.itl from Previous iTunes Libraries and replaced it with the original in Music - iTunes-folder.
-
Can't start the web site of Reports Services
Does anybody know how to fix this problem?
After installation of the 9iAS, can't start the web site of
Reports Services
and Form Services from the URL listed in the postinstallation
guide using
default port no 1950. The dev60html and devdem60/demo
directories are not
existing, the runrep.htm and runform.htm files are in the
directory
tools/web60/html. I also tried to replace the dev60html with
tools/web60/html
in the URL but it won't work.
During the installation the discoverer and portal tools failed,
the portal
hanged at 100%, and the discoverer didn't install the util
directory. But we
can login to the portal from the URL.
Below is the message when I start from the command line: I am
not sure if it is
working.
$ reports60_server start
Stopping Reports Server Rep60_abc.com processes...
kill -9 5647
Reports Server Rep60_abc.com stopped.
Starting new Reports Server Rep60_abc.com .
rwmts60 name=Rep60_abc.com
Stopping Reports Server Rep60_abc.com processes...
kill -9 5910
Reports Server Rep60_abc.com stopped.
$ reports60_server start
Stopping Reports Server Rep60_abc.com processes...
Could not find running instance of Reports Server
Rep60_abc.com
Starting new Reports Server Rep60_abc.com .
rwmts60 name=Rep60_abc.com
ThanksHi,
Dumb question : is one of your server listening on port 7001 ? If not, should it ?
What is the expected behavior ? A managed trying to connect to the admin server ?
Check the value for ADMIN_URL value, set in the startManagedServer.sh or cmd.
Another dumb question : do you have a firewall ? -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
Can't start the runInstaller for Oracle 8.1.7 on Red Hat 7.2 Linux
I can't start the runInstaller for Oracle 8.1.7 under Red Hat Linux 7.2 (enigma).
Please Help Me!I have the same problem as you had,but my one is that after typing ./runInstaller it will terminate, when you run ps -ef | grep oracle , there are still some backend process running over there.
Does any one has experience to install Oracle8i on Linux? Pleae give us help.
Jeff -
I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?
Well first off you shouldn't have had to pay for a download (just an assumption from the word "purchased".
If you are trying to install iOS 5 on your iPod touch, it won't work they arent compatible. I suggest checking what version of software you are trying to install and posting it in this forum so people can have a better understanding. -
I*ve just installed PS CC but whwn I start the program it says somthing aboout PS CC has stopped to work
Nobody can tell you anything without proper system information and details like the crash logs from your Event Viewer.
Mylenium -
Can i start only Java Instance
HI,
I installed both JAVA+ABAP stack in Nw2004s.can i start only Java STACK(java instance) with out starting the ABAP instance from SAP MMCHi Surya,
Under normal circumstances the persistence store for an ABAP+JAVA stack is the ABAP system, therefore, your system may not work without the ABAP stack. If you need just the java stack, I would recommend that you install a JAVA only system.
Sajit -
I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?
It shows up in the store as a universal app, so you should be ok to go.
-
I have two versions of Lightroom installed on my computer, can I uninstall the older version?
While looking at the "Programs and Features" folder on my Windows 7 computer I discovered that I have two versions of Adobe Lightroom installed on my system. One is Lightroom 5.2, installed on 9/19/2013, and the other is Adobe Photoshop Lightroom 5.5 64-bit, installed on 7/5/2014
- Can I uninstall the older version?
- Will uninstalling the older version cause any problems with the newer version?
- If yes to either question, is there anything I need to do before doing the uninstall (i.e. deactivating, etc.)
Any advice on how to correct this problem is gratefully appreciated.
PS; I have the same issue with Muse CC. See: I have two versions of Muse CC installed on my computer, can I uninstall the older version?Jim,
I thought it was odd that I had two versions of Lightroom installed as well. I have been able to track the issue back to an apparent "bug" in the Lightroom 5.2 update that installed a second version of Lightroom in addition to updating the existing version on my computers. At the time, I posted about it at Lightroom 5 installed twice on my laptop. While I never got an answer to my question, which was "Is this normal?" I did hear from others in the forum the experienced the same problem and had the same question. As time passed, later releases updated one of the two installations, but did not effect the second. Hence, two different versions of Lightroom 5 installed on the same computer.
Uninstalling the older version solved the problem. Thanks -
I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?
Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
what do i do if i receive this message while trying to instal skype, etc
You can't open the application "Skype.app" because it is not supported on this architecture. This also occur while trying to instal some other....Hello,
This would indicate your trying to install a version for the Mac which require the Intel processor. (MacBook)
You need to install Skype for PPC Mac
Maybe you are looking for
-
Song names do not show up on itunes from my own cd's
When I load a cd into my computer it does not show the album name or the song names. Does anyone know what I ma doing wrong
-
Cross Company STO w/billing through 3rd Company Code
We have the following situation with our Plants and Company Codes: 1) Company Code 1, Plant 1 (Manufacturing and Distribution), US 2) Company Code 2, Plant 2 (Manufacturing), Asia 3) Company Code 3, Plant 3 (Distribution), Europe
-
Open Form Based On A Table in same window
Hi All, First to make things clearer I'll explain what I CAN do: Create a page which queries a session variable at the start and then depending on its value outputs different HTML, but always in the same format and more importantly the same window, t
-
My hd makes clicking noises...
I just got the 30GB iPod video yesterday and I noticed at the start and finish of a video, and occasionally while playing music, the HD makes quite obvious clicking noises. The reason I'm worried is because I though HD's only make the noise of starti
-
Ipod Disconnects In the Middle of Uploading Session!!!
when i upload anything (songs, photos, movies) the ipod will upload them halfway, or three fourths of the way and then disconnect. the icon from itunes disappears, as well as the do not disconnect sign on the ipod. what do i do, to complete the uploa