EHP5 Installation: Error in Phase PREP_INPUT/KX_CPYORG
Hi there,
happy new to year to all of you
I have a problem with the EHPI (latest version). In Phase "PREP_INPUT/KX_CPYORG" i get the following error:
KX_CPYORG.LOG:
1 ETQ200 Executing actual phase 'PREP_INPUT/KX_CPYORG'.
1 ETQ399 Source directory: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
1 ETQ399 optional list file 'dbclient.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'igsexe.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'sapcrypto.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 Using copy list: instance.lst
1 ETQ399 Using copy list: instancedb.lst
1 ETQ399 Copying files from 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' to 'D:\usr\sap\EHPI\abap\exe'
2 ETQ399 Reading list file 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64\instance.lst'
The problem here is its an unicode System - ever was! and there is no path D:\usr\sap\BIL\SYS\exe\ nuc \NTAMD64 but a D:\usr\sap\BIL\SYS\exe\ uc \NTAMD64
The Systems' profile parameter OS_UNICODE says: "uc". DIR_CT_RUN says "D:\usr\sap\BIL\SYS\exe\uc\NTAMD64"
So why does the EHPI think this is a Non-Unicode system?
Any ideas?
regards,
Markus
When i check the files "BIL_DVEBMGS00_BILBO.PPR" and "START_DVEBMGS00_BILBO.PPR" from the EHPI directory D:\usr\sap\EHPI\abap\log\ i do find entries like
2 DIR_CT_RUN User: SAP: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
and
2 OS_UNICODE User: SAP: nuc
But the question remains. Where does it take these ones from? The System profiles do not refer to "nuc" anywhere but always to "uc".
Similar Messages
-
EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi,
Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
Thanx,
SBS Administrator. -
EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi
Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
Best regards
Mischa -
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG!
We are installing the EHP4 on a ERP 6.0 EHP4 ready ABAP system. ( MSCS
Installation)
We are using SAP EHP INSTALLER 7.00 .( latest version)
However , while in extraction phase we are getting following
error "evere error(s) occured in phase PREP_INPUT/KX_CPYORG!
Last error code set: Failed to copy 1 files, check 'KX_CPYORG.LOG' for
details"
We have checked that user SIDADM user has full rights over the
directory "
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64"
Please advice where to look for errors and how to resolve them. Just an information i DID NOT stopped any services on both of nodes , as its an MSCS installation and i am running ehpi tool at server on which CI was installed and running the tool from CI /usr/sap/sid/ehpi directory.
There is no error in KX_CPYORG.log file .
2 ETQ399 Reading list file '
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64\dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'dbatoolsora.mf'.
3 ETQ399 Copying file 'brarchive.exe'.
3 ETQ399 Copying file 'brbackup.exe'.
3 ETQ399 Copying file 'brconnect.exe'.
3 ETQ399 Copying file 'brrecover.exe'.
3 ETQ399 Copying file 'brrestore.exe'.
3 ETQ399 Copying file 'brspace.exe'.
3 ETQ399 Copying file 'brtools.exe'.
3 ETQ399 Copying file 'libsbt.dll'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'ntenv2reg.exe'.
3 ETQ399 Copying file 'ARCHIVE_OFF.BAT'.
3 ETQ399 Copying file 'ARCHIVE_ON.BAT'.
3 ETQ399 Copying file 'ARCHIVE_TST.BAT'.
3 ETQ399 Copying file 'strdbs.cmd'.
3 ETQ399 Copying file 'CPIO.EXE'.
3 ETQ399 Copying file 'DD.EXE'.
3 ETQ399 Copying file 'MT.EXE'.
3 ETQ399 Copying file 'MKSZIP.EXE'.
3 ETQ399 Copying file 'UNCOMPRESS.EXE'.
1 ETQ399 Copied 915 files.
1EETQ399 Failed to copy 1 files.
Please advice
Regards
Edited by: Tech GCCIA on Oct 14, 2010 1:52 PMIn my case, it cannot overwrite some files, i could found it in the log.
See :
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicudata50.a': Text file busy
3 ETQ399 Copying file 'libicui18n40.a'.
3 ETQ399 Copying file 'libicui18n50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicui18n50.a': Text file busy
3 ETQ399 Copying file 'libicuuc40.a'.
3 ETQ399 Copying file 'libicuuc50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicuuc50.a': Text file busy
I've just renamed these files for _bkp and runned again.
It works!
Thanks and I hope help you !!!
regards,
Eddie -
EHP6 - Severe error(s) occurred in phase PREP_INPUT/KX_CPYORG!
Hi All,
We are at the "extraction" stage of our EHP6 upgrade for pre-prod system, this serves as rehearsal for the execution of the same upgrade in production system.
However, SUM is stopped due to below error.
SUM - EXTRACTION phase stops at PREP_INPUT/KX_CPYORG, showing the error message below:
Severe error occurred in phase PREP_INPUT/KX_CPYORG!
Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
And checking from log, it shows "4EETQ399 Source file 'exe_syb.lst' missing!". This file doesn't exist anywhere in the system. Also, checking from logs of previous EHP6 upgrade in our DEV and QAS systems, this file doesn't exist. And instead of "exe_syb.lst", what has been copied from previous upgrades is 'exe_db6.lst'. We are at HP-UX and DB6.
Logs:
4EETQ399 Source file 'exe_syb.lst' missing!
1 ETQ399 Copied 821 files.
1EETQ399 Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
1EETQ204 Upgrade phase "KX_CPYORG" aborted with severe errors ("20140721180154")
Please advise how to fix.
Regards,
PhilipHI,
Kindly share 'KX_CPYORG.LOG files for analysis.Meanwhile try to patch the kernel with latest available at SMP and recheck for permissions and ownerships under kernel directory.
Regards,
Gaurav -
Error during the PREP_INPUT/KX_CPYORG in the EXTRACTION roadmap step
Dear Gurus,
We are on SUSELinux 10 SP2
Oracle 10.4 and
I am in the process of applying EhP4 on top of my ECC 6.0 SR3 server and i m in the Extraction roadmap step and at a phase PREP_INPUT/KX_CPYORG which gives me the following error
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG! on my SAPEhPGUi screen and no log gives a clear explaination of this error, i have checked the log KX_CPYORG.LOG and it is as below
======================================================================================================
2 ETQ399 Reading list file '/usr/sap/KDV/SYS/exe/run/dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'brarchive'.
3 ETQ399 Copying file 'brbackup'.
3 ETQ399 Copying file 'brconnect'.
3 ETQ399 Copying file 'brrecover'.
3 ETQ399 Copying file 'brrestore'.
3 ETQ399 Copying file 'brspace'.
3 ETQ399 Copying file 'brtools'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'libsbt.so'.
1 ETQ399 Copied 784 files.
1 ETQ399 Failed to copy 1 files.
But doesnt say which file..
======================================================================================================
Apart from that i have also checked the log file SAPehpichk.log, which is as below
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20091004010834
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from /usr/sap/KDV/SYS/exe/run.
...begin dialogue at 20091004010846
======================================================================================================
i have also checked the files and the size of the /usr/sap/KDV/SYS/exe and /ehp4/EhPInstaller/EHPI/abap/exe folders and they look alike and no size difference among them.
Can anyone please help me come out of this situation.
I have re-run the Phase (repeated) many a times with no luck.
Awaiting any inputs on the same,
Million thanks in advance,
BasoDear All,
The issue is resolved and i did the following
1) Cancelled the Ehp4 installation
2) Deleted EHPI directory
3) Downloaded latest EhPI (which is released on 1 Oct)
4) Restarted the EhP4 installation
5) Changed the icmbnd file permissions in the source directory to 777 and owner to SIDadm
6) Copied it manually with the same permissions into the target exe directory (ehp4/EHPI/abap/exe)
7) After the phase reset the file permissions back to original in the source directory (/usr/sap/SID/SYS/exe/run)
Only one good suggestion is download the latest EhP installer
Hope this helps
Thanks to all
Regards
Hunky -
ERP - EHP5 upgrade - error in phase Preprocessing - MAIN_SHDRUN/DDIC_UPG
Dear SAP,
I have started my upgrade from ERP EHP4 to EHP5.
During phase PreProcessing - the phase MAIN_SHDRUN/DDIC_UPG fails for the following reason :
In TP.SAV, I have this error :
ERRORS: Highest tp internal error was: 0232
TRACE-INFO: 32: [ dev trc,00000] OCIServerAttach(OCI_DEFAULT) failed with SQL error 12537: 58 0.045050
TRACE-INFO: 35: [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '12537' 32 0.045096
TRACE-INFO: 36: [ dev trc,00000] set_ocica() -> SQL error code 12537 15 0.045111
TRACE-INFO: 38: [ dev trc,00000] OCIErrorGet -> SQL error code: 12537 51 0.045175
TRACE-INFO: 41: [ dev trc,00000] SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537. 28 0.045221
TRACE-INFO: 43: [ dblink ,00000] ***LOG BY2=>sql error 12537 performing CON 60 0.045304
ERRORS: Highest tp internal error was: 0232
I have already changed the R3trans and tp executable.
Any help is very welcome.
Best regards
SAP NetWeaver AdminHi,
The phase is stopped with the following error
ERROR => CONNECT failed with sql error '12537'
SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537.
***LOG BY2=>sql error 12537 performing CON
***LOG BY0=>ORA-12537: TNS:connection closed
1AETW000 ===> HALT: reconnect to DB failed Please contact the SAP support.
4 ETW000 End of Transport (0016)
This issue is caused by misconfigured parameters for Oracle. The main
ones are the parameters: PROCESSES and SESSIONS.
Please check SAPnote # 1431798 and correct/increase the parameters.
then repeat the phase to proceed further with the upgrade.
Thank You.
Regards,
Deepika -
TREX Installation, Error in phase - Install TREX web resources and finalize
Hello,
Platforms:
SO - Win 2008 (R2) X64
During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
I searched for this error and I found the following SDN forum:
SAPNW EHP1 SR1
I already press the retry button but it always show me the same error.
During this phase the SAPInst window show some information and in there I see this two:
creating sap start service of instance TSM/TRX02...
service not correcttly installed.
It is very weird thing!
I will post some log files such as sapstartsrv.exe and sapinst.log.
sapstartsrv.exe:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed
sapinst.log:
INFO 2012-01-20 16:29:24.446
Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
INFO 2012-01-20 16:29:24.457
Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
WARNING 2012-01-20 16:31:41.182
Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed.
ERROR 2012-01-20 16:31:41.380
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.381
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.470
FCO-00011 The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
Can you help me please, how can I solve this?
Kind regards,
JDimasHello Arjun Venkateswarlu,
1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
- As I said the windows firewall is disable (OFF)
2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
- All the created users during this installation belongs to local admins. This isn´t a domain installation!
3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
- I already did that... but it continues to show me the same error!
Any other tip?
Kind regards,
JDimas -
ECC5 installation error during phase "Create Database"
We are installing ECC5 on IA64 using Oracle 9207.
At phase 'Create database' the sapinst aborts reporting errors executing the oradim -NEW SID command.
The oradim.log contains one row only : "DIM-00019: error creating service".
The OracleServiceSID is created, but it does not start.
If we try to run manually the command "Oracle.exe SID", so the same command that is started by the OracleServiceSID service a popup appear saying:
"The entry point kdr9ir2_pop could not be located in the dynamic link library oracle oracommon9.dll"
Any idea ? Are there problems with the oracle 920 sw installation or what ?
regardsHi,
Sounds like oracle problem.
- Please post the last few error statement from sapinst_dev.log.
- Check if the the following key is in the registry:
HKEY_LOCAL_MACHINE\system\currentcontrolset\services\OracleService
- check oracle alert<SID>.log, see if there is any significant errors.
- see note #602843
- if "DIM-00019: error creating service", does it mean that an Oracle service with the same SID already exist? if so, use command "sc delete [service name]" to delete the service and then restart the installation.
Hope this helps.
cheers,
Vincent -
ERROR in phase PREP_INPUT/SCANDIR_EXTRACT
i am upgrading my sap system to ehp4, in PREP_INPUT/SCANDIR_EXTRACT phase , an error occurred , it says " no entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT.
checked the log files
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303145435
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
...begin dialogue at 20110303145816
...end dialogue at 20110303150425
..answered at 20110303150425.
-> decided to try again.
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303150425
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
...begin dialogue at 20110303150807
2 ETQ399 Field DELI_DATE is '20081001'.
2 ETQ399 Field DELI_TIME is '092652'.
2 ETQ399 File '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' determined as 'COMPONENT=EA-APPL,COMP_REL=603,EPSSUBJECT=EA-APPL===603,PATCH_TYPE=ACP,TO_REL=0002,type=PATFILE'.
3 ETQ399 Entry for file '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' was updated.
1 ETQ399 Scanning PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT':
2WETQ399 Unrecognized PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT'!
2WETQ399 File '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT' could not be recognized!
please help..Hi
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
Check space in EPSINBOX
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
Check that all files .SAR and .CAR is uncar in EPSINBOX, uncar any file manually that not found in EPSINBOX and try again phase.
Other option is that restart EHPI and ensure that all package .SAR and .CAR is in download directory and that this files are OK.
Kind Regards
William Neira -
Installation Error: ImportABAP Phase
Hello,
I am installing Nerweaver 2004s SR2 in my Desktop, I got following error in middle.
OS:windows 2003 server
DB: Oracle 10g
SAP: Netweaver 2004s SR2
When Installation is going on ( Phase No: 19, ImportABAP) unexpected power got shutdown my system . Again i started the installation " Old Intsallation" i got the following error:
Error in SAPInst:
ERROR 2009-08-12 17:03:11
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-08-12 17:03:11
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Error in import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 14, failed 0, total 19.
Import Monitor jobs: running 2, waiting 3, completed 14, failed 0, total 19.
Import Monitor jobs: running 3, waiting 2, completed 14, failed 0, total 19.
Import Monitor jobs: running 4, waiting 1, completed 14, failed 0, total 19.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 14, failed 2, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 14, failed 3, total 19.
Import Monitor jobs: running 1, waiting 1, completed 14, failed 3, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 14, failed 4, total 19.
Error in import_monitor.log
ERROR: 2009-08-12 16:12:37 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Please give me the Solution for this.
Regards,
Sanjeeva
*<subjectmodified>*_
Edited by: Juan Reyes on Aug 12, 2009 1:22 PMHi,
My installation stopped over there.
SAPAPPL0.log History:
:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090826054453
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090826061014
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090826061016
Can you fix my issue?
Thanks in advance
Regards,
sanjeeva -
Installation error in phase " Install DBA Tools "
Hi All,
I go for distributed system installation.
OS: lINUX
DATABASE : ORACLE
I go to DB instance installation.I got stck in 16th step "Install DBA tools" and error log is
tail -f sapinst.log
ERROR 2009-01-12 09:58:34
FSL-02007 Unable to set access rights of /sapmnt/RTD/exe/brarchive.
ERROR 2009-01-12 09:58:34
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-01-12 09:58:34
FCO-00011 The step setPermissions with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|setPermissions was executed with status ERROR .
my brtools permissions are :
-rwxrwxr-x 1 rtdadm sapsys 589928 Apr 2 2006 ABAP.pad
-rwsrwxr-x 1 orartd dba 3272519 Mar 1 2006 brarchive
-rwsrwxr-x 1 orartd dba 3365157 Mar 1 2006 brbackup
-rwsrwxr-x 1 orartd dba 4448144 Mar 1 2006 brconnect
-rwxrwxr-x 1 orartd dba 3648470 Mar 1 2006 brrecover
-rwxrwxr-x 1 orartd dba 1297202 Feb 28 2006 brrestore
-rwxrwxr-x 1 orartd dba 4500065 Mar 1 2006 brspace
-rwxr-xr-x 1 orartd dba 1693010 Mar 1 2006 brtools
KIndly suggest for the same.
regards,
AmitHi
Download the latest DBA Tools from market place uncar it and paste it in the run folder and rerun the installation it will work out
Support Packages and Patches>SAP NetWeaver> SAP NETWEAVER> SAP NETWEAVER 7.0> Entry by Component-->Application Server ABAP
DBATL700O10_39-20000968.SAR
Thanks
Uday -
DB6 Installation - error on phase VIEW (CREATE VIEW "/BEV1/LAVMVA1_V)
Dear all,
I install LNX X86_64, DB6 - ERP 6.0 EHP4, during phase IMPORT ABAP I've got error in SAPVIEW.log:
usr/sap/SID/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/SID/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Dec 25 2009 23:46:01
/usr/sap/SID/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP VIEW "/BEV1/LAVMVA1_V" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "/BEV1/LAVMVA1_V" ( "MANDT", "BSTNK", "VKORG", "VTWEG", "SPART", "VKBUR", "VKGRP", "KUNNR", "ERNAM", "BSTDK", "AUART", "VBELN" ) AS SELECT T0001."MANDT", T0001."BSTNK", T0001."VKORG", T0001."VTWEG", T0001."SPART", T0001."VKBUR", T0001."VKGRP", T0001."KUNNR", T0001."ERNAM", T0001."BSTDK", T0001."AUART", T0002."VBELN" FROM "VBAK" T0001, "VBUK" T0002 WHERE T0002."MANDT" = T0001."MANDT" AND T0002."VBELN" = T0001."VBELN" AND ( T0002."VBOBJ" = 'A' OR T0002."VBOBJ" = 'L' ) )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/SID/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SID/SYS/exe/run/R3load: END OF LOG: 20100119153412
I have changed R3load, sapinst to newest version, space is enough, tablespaces are not full.
Do you have any idea what is cause of error and how to solve it?
Any help is appreciated.
Regards,
RomanHi Frank,
thanks for your very fast hints.
I have checked .log files SAPxxxx.log (SAP0000, SAPAPPL0, SAPAPPL1, ...) but there isnt any entry with VBAK.
When I entered under <sid>adm command: db2 describe table sap<sid>.VBAK it takes a long time wihtout any result.
Thanks a lot for your help.
Roman
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM -
Phase Create Database Error in ECC 6.0 EHP5 Installation on SuSe10/Oracle11
Hi,
I have following error ecnounter During Create Databse Phase. Have applied the latest patch after Oracle Installtion.
/oracle file system has the permissions 755.
Environment : ECC 6.0 EHP5 Installation on SuSe10/Oracle11.
Please advise
sapinst_log:-
INFO 2011-08-27 20:36:38.900
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.901
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.908
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:38.915
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:36:38.927
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.927
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.933
Real group ID set to 1001.
INFO 2011-08-27 20:36:39.497
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.498
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.510
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:36:39.510
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:39.543
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:37:58.173
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:37:58.174
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:38:02.167
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.168
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.172
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:38:02.190
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.192
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.198
Copied file '/Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel'.
INFO 2011-08-27 20:38:02.217
Authorizations set for /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.217
Removed file /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel.
INFO 2011-08-27 20:38:04.407
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.3.xml'.
INFO 2011-08-27 20:38:06.213
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.2.xml'.
INFO 2011-08-27 20:39:33.662
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.670
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:33.674
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.686
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:34.589
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:34.600
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:39.720
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:39.733
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:41.685
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.2.xml'.
INFO 2011-08-27 20:39:51.367
Execute step createDatabase of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
INFO 2011-08-27 20:39:57.971
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.1
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:58.26
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.71
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:40:00.256
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:40:00.278
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
ERROR 2011-08-27 20:40:08.434
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-08-27 20:40:08.437
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2011-08-27 20:40:08.585
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step: SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.).
INFO 2011-08-27 20:40:09.446
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.ora_sql results log:::
2011-08-27, 19:40:31 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 19:40:31 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 19:40:31 SAPINST ORACLE stop logging
2011-08-27, 20:27:43 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:43 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:50 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:50 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:50 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:52 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:00 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:05 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:05 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:05 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:40:07 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:08 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:08 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:08 SAPINST ORACLE stop logging -
Error in start of phase PREP_INPUT/PROFREAD
Hi Team,
We are facing the follwing error while 'RESET PREPARE' and it is not accepting the DDIC and SAPServiceER4 password also...
>> 2009/09/29 18:31:04 START OF PHASE PREP_INPUT/PROFREAD
>>>> Passwords <<<<
Enter the password for SAP user DDIC in client 000:
DDIC PASSWORD [***********]: ***********
Enter the password for the operating system account .\SAPServiceER4:
OS PASSWORD [***********]: ***********
ERROR: DDIC password does not work: RFC call to failed with key RFC_E
NICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM DEST=ER4, GWHOST=hydhtc100381d, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'hydhtc100381d:3300' not reached
TIME Tue Sep 29 18:31:38 200
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 3143
DETAIL NiPConnect2: 10.136.175.23:3300
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed o.
Please suggest the solution...
Also please let me know that for upgrading ECC 6.0 can we use EHP Installer version more than 7.0 ?
Waiting for your response...
VibhorHi Vibhor,
In resetting of upgrade you don't need DDIC user and sapservice<sid> password.
You can reset upgrade by using below command:
Change to the EHPI/abap/bin directory (Windows: EHPI\abap\bin)
Enter the following command:
./SAPehpi reset prepare (Windows: .\SAPehpi.exe reset prepare)
Delete the EHPI directory.
Start SAPehpi again.
Also, In order to upgrade ERP to EHP4 you cannot use EHPI of version higher than 7.0.
Thanks
Sunny
Maybe you are looking for
-
Javascript alert box due to inactivity
Can anyone give me an example how to use javascript to display an alert box after a certain time of inactivity?
-
Display messed up when mirroring through macbook pro
When I mirror my macbook pro the tv only shows the top left area of my computer screen like its zoomed in. anyone know how to fix it?
-
The application firefox quit unexpectedly
"the application firefox quit unexpectedly". The latest place I visited was my local DMV when this occured. What do I need to do to make it not do that again. It is very aggravating trying to get somewhere only to have it die midstream. Will the late
-
Problemas con Photoshop CC 2014 y SONY UP-DR200 funcionando con windows 8.1.
Hola. Tengo una impresora SONY UP-DR200 funcionando con windows 8.1. Todos los programas que tengo trabajan con ella y Photoshop CC (la version anterior) tambien, pero desde que he instalado esta version (CC 2014) no puedo imprimir con ella desde Pho
-
Datasource set to NONE after classic to EPMA conversion
Hello everyone. We recently transformed a classic Hyperion application to EPMA. Everything seems to be alright and the application is working fine after conversion. However, when performing application deploys, we've noticed that the datasource appea