EHP5 Portal Nakisa Iview creation

Hi Friends,
Could anyone share me the steps to create Nakisa IView for (Org chart, career planning and Succession Planning) in portal EHP5.
And also let me know the URI for nakisa.
Thanks in advance
seranjeeve

1.     Content Administration > Portal Content
2.     Right click on folder where you want to create iView
3.     New > iView
4.     Select iView template and click Next
5.     Select URL iView and click Next
6.     Enter iView Name (free text, appears on screen), iView ID (no spaces, unique identifier), and iView ID prefix (for identification) and click Next
7.     Enter URL and click Next
        OrgChart URL is in format: http://<server>:<port>/OrgChart/default.jsp
        CareerPlanning URL is in format: http://<server>:<port>/CareerPlanning/default.jsp
        SuccessionPlanning URL is in format: http://<server>:<port>/SuccessionPlanning/default.jsp
8. Click Finish
9.     iView editing properties appear on screen. I recommend you change the size of the tray to Automatic or Full Page and under the property category Appearance u2013 Tray set the u201CShow Trayu201D to No and u201CTray Typeu201D to Transparent.
10.     Save and Close when you are done.
Stephen

Similar Messages

Portal Installed - Slow iView creation etc

Hi,
We have just completed the installation of the production EP 7 (2004s) on a new blade server.
Config
4 Swap Drives of 5GB each
OS - 2003 Server standard edition SP1 on C Drive (12GB)
EP instance installed on a separate netapps drive (40GB)
*4GB RAM
In creating a simple new iView it takes 3-4 minutes.
What could be the reason? Is there a mechanism to improve performance?
In our previous portal implementation (EP 6) the iView creation etc is very fast. (with a hardware configuration inferior to the one specified above)
Any advice would be highly appreciated,
Thanks and Regards,
Antony.

Hi,
Nope actually, we are still encountering this problem. But there is a workaround. Say you have created an iview, you can copy such iview and change the relevant parameters later including the ID, name and all other particulars in order to create new iviews rather than creating new iviews altogether through the wizard.
The copying activity takes just a couple of seconds.
Hope this helps..
Antony.
P.S. : Reward points would be appreciated.

PAR file missing in PAR selection list during iView creation

Hi Gurus
I created a jsp file and exported it through NWDS export option. But i dont get this par while iView creation. Its present when i searched in the support desk . Can anybody tell me the steps how to create a simple jsp in NWDS and test the same in Potal as iViews.
Thanks in advance

Hi,
Use NWDS wizards:
1) File -> Mew Project -> Portal Application -> Create a Portal Application Project
2) Right click on the project you created -> New -> Other -> Portal Application Project -> Create a new Portal Application Object
3) Select Portal Component -> JSPDynPage
4) Write your code ...
5) Deploy the par file & create iview from it.
Omri

WD Java iView Creation Question/Issue - CE 7.1 EHP 1 Trial

Hi all,
Im posting this question here seeing as that the issue has arrised on an installation of the AS JAVA and EP shipped with CE 7.1 EHP1 Trial.
When attempting to create an iView for a deployed custom WD Java app on the trial Portal I am taken straight to the iView template selection without being given the options for iView creation( ie. create from template, portal component or WD Java app). Is this by design ( WD Java iView creation has changed from previous Portal versions or is limited in Trial installation), is this an issue with the components shipped with the Trial or an issue on my installation only?
Currently my only solution for deploying WD java content is to copy the actual application and paste it as Portal content which then creates a WD Proxy page with a single WD Proxy iView (that of the copy pasted WD app). This is fine for single app scenarios but becomes an issue with multiple apps on one page and drag and relate scenarios.
Kind regards,
Willem.

Hi Williem
Please check the SAP CE 7.1 EHP1 documentation for more information.
[CE 7.1 documentation|http://help.sap.com/saphelp_nwce711/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm]
[CE 7.1 iViews |http://help.sap.com/saphelp_nwce711/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm]
Hope this will helps you.
Thanks
Arun Jaiswal

How to use Application Integrator for iView Creation

Hi all
any one can help me how to create an iView(webshop b2b iview) by using the Application integrator in portal
Regards
sunil

1) creating URL ivew , for that you can refer this
URL iView Creation
2) You can directly deploy your .net project from the Visual Studio itself(sound's amazing right!!). SAP have provided a add-on to deploy directly from VS 2003/2005.
For that you need
SAP Portal Add-in 2.5 for Visual Studio 2005 - Hotfix 1.exe
SAP Portal Runtime 2.5 for Microsoft .NET - Hotfix 1.exe

Portal Transaction iView not opening in browser but its open in R/3 screen

Hi
I have 2 senario.
First Scenario:
I login only into the portal and not login into R/3. I could access the portal transaction iview in the new broser portal window. And this is the expected behaviour.
second senario
I login into Portal as well as R/3 through SAP logon Pad (SAP GUI).
Now if I access Transaction Iview through portal , this transaction Iview is opened in R/3 side window not in portal browser window .And also same time we can see only new blank portal window iopen n portal side.
My question is that whichever transaction iView we access through portal we want to see that transaction iView in portal browser window like in first senario not in R/3 window.
Please help me to resolve this problem
Regards
Ruturaj

Hi Shanti
Thanks for replying.
The problem is that when our user trying to do same things in our system with his credentials means UID and PWD its working fine.But when he do the same things in his system with his credentials problem occured as per the senario 2.
This problem is not only that user but also whole their team member.
Regardfs
Ruturaj
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:20 AM
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:25 AM

Portal Activity iview error

Hi Experts,
I am not getting the actual output when i trigerred Portal Activity iview......
For ex: If I am looking for Number of logged in users .....it always shows Zero.......
Even for the number of entries made in iview..getting the same value zero.......
Please throw some clue on this issue.
Higher points rewarded for the valuable inputs
Thanks in Advance,
Dharani

Hi Dharani,
What version are you working in? There were significant changes around SP15 in 2004.
Why you may not see data:
Data collection service is off
Data aggregation application is not installed or running
You have selected a period of time that has not been aggregated (like you want all logins for 10-noon today, with hourly interval, but this period has not completed. You will see zero.
Start by checking the database tables starting with WCR_ and see if there is in fact data.
Hope this helps.
Daniel

Portal Language Iview

Hi,
I need to add portal language iview in the personalized link, Where can i get this language iview. This is required to change the language of the users.
Regards,
Sanjeev Mourya

Hi,
I am using EP 6.0 SP15
Personalized page has been modified earlier, now I need to add local language iview or page in the personalize link.
How to do it? If I check the standard role, I am able to see the local page, but when I check the delta link, It is not poing to the exact page, It is inhertited by defualt page and point to that page only.
Please reply...
Thanks
Regards,
Sanjeev

Portal Transaction iView Button disabled

Hello expert,
I wish know why the button on menu of Pop-Up Portal are disabled.
I created a SAP Portal Transaction iView:
Image:
http://img718.imageshack.us/img718/7001/helpsdn.jpg
And the button NEW WINDOW is disabled, but if I put on the field where we type transaction: /ose37
then, a new window will open because I used /o
My question is: Why this button - NEW WINDOW is disabled? How can I enable this?
thanks.

The solution for other versions is explained in the same note. However the note says that the procedure is NOT recommended and NOT supported by SAP.
You will need to editi the WinGuiRenderLayer.properties and set -wp=false in the SSDCommandTemplate
For NW04 realease and above the WinGuiRenderLayer.properties can be found at:
../usr/sap/< SID>/<InstID>/j2ee/cluster/server< server#> /apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.appintegrator.sap/property/transaction
(Make these changes in all the server nodes. A restart of the portal might be required after making these changes.)
Please note that if you change anything in this property file, it will be overwritten if a new version of application com.sap.portal.appintegrator.sap.par is delivered or when a new SP is applied.
It is also recommended to keep the original archive com.sap.portal.appintegrator.sap.par in a temporary folder and redeploy it if you encounter any side effects.
Have a look at this thread also:
WinGUI create new session option not available
Thanks,
Shanti

Portal Favorites iView is not appearing !!!!!!

Hi
the Portal favorite iview is not appearing.
We have transported all KM content from dev to test server.
The Portal favourite iView itself is not coming.i have checked in Contemt Administration> KM content> root> entry point> favorites.
the favourite folder is there, but iView is not appearing.
Need help.
Regards
Disha

Hi Disha,
Check whether the Portal Favorites iView is enabled and set to Visible under
Portal Content ® Portal User ® Standard Portal Users ->
Tool Area iView and choose Open - > Portal Favorites
Regards,
Venkat.

Portal favorites Iview Displaying twice in detailed navigation iview

Hi All,
I am facing one issue in portal...
In all the roles Portal Favorites Ivew is displaying twice in the detailed navigation iview. And the options in the Iview are different like details, refresh, Open a new window....
I have only one default framework assigned to my desktop....
I cldnot trace out which is causing this issue...
Could someone adivse me on this...?
Thanks & regards
Sireesha.

Hi Munna,
This is the PCD-PATH of the second portal Favorites Iview.
Portal Component: com.sap.km.cm.navigation
Object ID:
fpn:DJP_FPN_JAVA/pcd:portal_content/SCOPP/RENAULT_Administration/SCOPP_DISPLAY/SCOPP_CCTS_Desktop/frameworkPages/SCOPP_CCTS.frameworkpage/com.sap.portal.innerpage/com.sap.km.PortalFavorites_0:rn4p6qvmOIw3xqr6ngdRBQ%3D%3D:1:
Regards
Sireesha.

Portal Favorites iview always appear in detailed navigation

Hello,
I have a problem regarding the Detailed Navigation with the Portal Favorites iview.
The iview always appears in the Detailed Navigation, although the only thing it shows is the message "there are no items to display" (meaning that there are no favorites). This causes the detailed navigation to always appear even when there is no need for it (no navigation links and no other content attached to it).
I tried removing the Portal Favorites iview (because we don't use that iview in the portal and have no need for it) from the innerpage of the default framework page, and it works, but after the next restart of the portal, the iview returns.
Is there any way to remove it completely so that it won't appear again?
We're running EP7 SP14.
Thanks in advance,
Tal.

Hi,
Create a new framework page by creating a delta link of the original page and then modify that framework page.
Also you will have to create a new portal desktop and use the modified page and also set the desktop rules accordingly.
Thanks,
GLM

Difference between "Favorites"- & "Portal Favorites"-iView

Hi SDN
Can anybody tell me the difference between the km-iView "Favorites" and "Portal Favorites"?
Also, when I enable the "Favorites"-iView a caption between the Favorites-entries and the Tray is added. How can I remove this?
And: The layout of the Favorites-iView-entries is different from those of the Portal-Favorites-iView-entries (the space between the list-dot and the text). It seems not to be affected the same way by the Complex Items -> Tree settings in Theme Editor.
Thanks in advance
Michael

As I found out the LayoutSet-Setting is responsible for the display.
In Favorites-iView the default LayoutSet was LinkListExplorer. After I changed it to PortalFavoritesExplorer the space between dot-and-text vanished along with the "Favorites"-caption - but sadly the "Organize Entries" Link on the bottom disappeared, too...
I think I have to play around a bit with LayoutSets
Main parts of the question already answered...
What still remains is the question about the acutal difference between these iViews.
Michael

Translated content in Portal Favourites iView

Hi All,
I have Portal roles in two languages English and German. I set the browser language to check the translations. Initially the browser language is English. When we add the role to Portal Favourites and then change the browser language to German, the text in the Roles is changed but the text in the Portal Favourites iview still remains in English. Can anyone tell me how to translate the content of Portal Favourites iview?
Thanks,
Priya

Hi,
You can upload an Image or an HTML file in the KM Repository and then create an iview pointing to that file. Assign that to a role and and make the entry point YES.
Assign that role to user.
Whenever that user logs in the image will be displayed.
Hope this helps!
Regards,
Atul Shrivastava

How to customise portal favourites iView

Hi,
Could you please let me know the name of par file for favourites iView in portal. I need to customise this iView.
Thanks,
ksk

com.sap.km.cm.navigation.par.bak
this is the Portal Favorites iView related PAR which presents you option for adding internal or extrernal links. I hope you are talking about this one only?
Regards,
Shubhadip

EHP5 Portal Nakisa Iview creation

Similar Messages

Maybe you are looking for