EHP5 Stack File is invalid: component 'EA-HR' (stack release 600 source .

Hi all . . .
Attempting to install EHP5 on ERP ABAP stack. Currently on EHP4 SPS5.
During the configuration roadmap step, the Stack configuration overview told me that "for the following components, a Component Upgrade/Installation and/or Support Packages will be included according to the selected EhP stack configuration . . . " and it proceeded to list the various compoents and their intended releases. During that, I did take note that it wanted to move EA-HR to 600 SPLevel 0059 . . . I was surprised by this, yet I pressed on.
Now, during the Information Gathering phase (PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION) I received the error:
Last error code set: Stack file is invalid: component 'EA-HR' (stack release 600 < source release 604)
I understand that it is trying to tell me that the component is trying to install a release lower than what is already installed. The problem is, I do not know how to go about fixing it.
Any suggestions?
Thanks,
Bryan Montgomery

Hello Bryan,
I believe the best and fastest way to have EA-HR upgraded to 605 is to unselect this usage type in MOPZ, regenerate the XML without it, upgrade the rest of the system to EhP5 level and, afterwards, upgrade only EA-HR to 605 level using SAINT.
Please make sure to check the EHP5 manuals:
http://service.sap.com/swdc
  -> Ramp-Up Releases and Beta Software
    -> Installation and Upgrade
      -> EHP5 FOR SAP ERP 6.0
       -> Technical Documentation
and these notes:
#1323537 - Release Info SAP Enhancement Package 5 for SAP ERP 6.0
#1304648 - SAP ERP Enhan.Pk.5 SP Stack 01(10/2009) - Release Information Note
Best regards,
Tomas Black

Similar Messages

  • Stack file is invalid: 'SEM-BW' (stack release 600 source release 602)

    Hi experts,
    I encountered the following error while patching my BCS SEM system using EHPi.
    Servere error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
    Last error code set: Stack file is invalid: component 'SEM-BW' (stack release 600 < source release 602)
    The BCS SEM system is currently installed with SEM-BW 602. But the xml stack file generated by solution manager contains SEM-BW 600. From SMSY, under the Software Components tab, the release for software component SEM-BW is 602.
    Where does solution manager obtain the data when calculating the xml stack? How can I generate a xml stack with SEM-BW release 602?
    Thanks,
    Tzyy Ming

    Hi.
    When installing this system you have used an installation guide. If i were you i would try to configure the system described in the guide. SAP note 852447 talks about an IInstallation SEM-BW 600 on SAP NW 2004s AS ABAP;
    So why not try to configure this system as netweaver as abap in smsy and add the add-ons as relevant. But i am not completely sure - i am at home and can not look to our SolMan system.
    I do not think that the configured system should be the problem. You said, the smsy contains the correct data. Did you refresh the product data in your solution manager. That could be the reason why the queue ist not calculated correct ly.
    regards,
    Martin

  • EhP4 Stack file format error in xml

    Hi all,
    My intention is to Upgrade an sap system 4.6C to Ecc6 including EhP4.
    i am running through many problems since now
    Here is my newest one:
    In solution manager i calculated a stack.xml. After that, i copied the files to the test system which i am upgrading. Now in phase "Stack configuration" i must provide the xml-file.
    when i click next, i get an error:
    The selected configuration file ("M:InstCds
    w70ehp1SMSDXML_P01_20090520113757.307.xml") is not useable.
    Reason: "File format error"
    Update ....
    OK my fault.
    in SAP Note Number: 1022704 is the info that in case of start release BELOW 4.6, you cannot use the xml-file, you have to choose the txt-file
    Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
    i tried different files but every time the same error ...
    Any idea ?
    regards,
    Bjoern
    Edited by: Björn Trabes on May 20, 2009 4:23 PM

    Sorry,
    As i wrote
    Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
    is work for the txt-files in this way, that the stack can be read.
    It is a little bit confusing, as the german note says: as of 4.6 and lower
    but the english note says: lower than 4.6
    so there is a little diffrence
    But now i have the Problem, that the generated Stack-file from the solution manager is invalid:
    "# Error message set: 'Stack file is invalid: keep version w/o component upgrade'"

  • EHP4 upgrade -- Error at loading stack file

    Hi guys,
    I have come across an error while upgrading to EHP4, after making a stack file from solution manager maintainance optimiser, I got the error of "no access to solution manager then I gave the path of stack file and it worked. Now it has sever error : Stack file is invalid. (stack release 2005_1_700 < source release 2008_1_700). Thats because after installing EHP4 ready the level of ST-PI is 2008_1_700 and the solution manager is calculating it 2005_1_700.
    Any sugestions on it....

    >
    Sunny Pahuja wrote:
    > Hi Jawad,
    >
    > have you checked your Shadow system is up or not ? I think your shadow system is down ..Please check..
    >
    > Thanks
    > sunny
    >
    Sunny Pahuja wrote:
    > Hi Jawad,
    >
    > have you checked your Shadow system is up or not ? I think your shadow system is down ..Please check..
    >
    > Thanks
    > sunny
    Hi Sunny,
    the sahdow system is running fine, the rfc is also connected but now it has error on phase MAIN_SHDRUN/ALTNTAB_FILL.
    here are the logs
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ010 Date & Time: 20090616080047 
    4 ETQ265 Starting report "RDDNT2MT" with variant "SAP_INIT" in batch
    4 ETQ359 RFC Login to: System="ID2", Nr="01", GwHost="win-2cc-s-042", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ311 Batch job "RDDNT2MT" with job count "08011600" scheduled
    4 ETQ359 RFC Login to: System="ID2", Nr="01", GwHost="win-2cc-s-042", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ010 Date & Time: 20090616080622 
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    *1EETQ248 Missing log file(s) of report "RDDNT2MT", matching "RDDNT2MT\.ID2"*
    1 ETQ207 Executing post-phase DB specific actions.
    1 ETQ207 Executing post-phase OS specific actions.
    4 ETQ010 Date & Time: 20090616080622

  • Stack File for JSPM when using Maintenance Optimizer

    Hello,
    As you know JSPM looks for a stack file when applying a support pack stack.  When using maintanance optimizer I see no way to get a stack file.  I end up having to do the work twice:  once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
    Am I missing something?  Is this double work really necessary?

    Hello John,
    It seems that you are doing double work.
    If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
    You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
    Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
    A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
    Regards
    Amit

  • Imports - EHP5 - Ignore Invalid Component Versions option

    Hello,
       EHP5 has introduced an additional option - "ignore invalid component version" import option. What is the code equivalent while using this unconditional mode option.
    tp import help says:
    U<nnn>                specify one or more unconditional modes
    <nnn>       umode digits, i.e. 0,1,2,..,9
    Which umode digit corresponds too  "ignore invalid component version"

    Hi,
    Meaning for the different unconditional modes with tp command:
    http://help.sap.com/SAPhelp_nw70/helpdata/en/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm
    U mode 2 overwrite original objects could correspond to ignore component version option.
    Regards,
    Srikishan

  • Error while downloading the stack file

    Hi,
    I'm in the process of upgrading my EhP4 system to EhP5.
    While trying to generate the file via MOPZ, I just can't seem to "Continue" with the Enhancement package installation option.
    The error's as follows:
    "Successor installed for SAP SNC 2007."--Check SMSY. (SMSY is perfectly reflecting whatever's installed on the ECC system.)
    I just can't figure out where SNC has cm in from.
    I do have the component ECC-SE on 604...does this have anything to do with it?
    Pls. help..
    Thank You,
    Saba.

    Hi Saba,
    I've had the same problem as you building the stack file for an EHP5 upgrade and have CPRXRPM version 400 installed. I used you idea of adding SAP SNC 7.0 as an installed product under the ERP system which enabled be to continue the mopz config and build a stack file.
    Now when attempting the upgrade I get :-
    "The Installation/Upgrade Package for Add-on SCMSNC rel. 700 is not available"
    This is not that surprising I guess as its not installed.
    Did you also come across this, if so were you able to bypass this?
    Thanks
    Warren

  • Renaming files with invalid characters in their names on NTFS partitions, introduced by operating systems other than Windows

    Essentially, Linux created some files with colons (:) in the name on a NTFS partition where I have Windows installed. I have since uninstalled Linux, but now I can only view these files in Windows Explorer. I can't open them, I can't even rename them to
    correct the problem. It's as if they don't exist, because of the invalid search paths.
    If I try to rename them in Windows Explorer I get following message.
    The file name you specified is no valid or too long.
    Specify a different file name.
    Well isnt' that something?... isn't that nice? Windows is able to display these files, but it doesn't allow me to open them and it certainly doesn't like me to rename them. So why is it whining about it then, when I'm trying to help? It says "try a different
    file name". Yeah, right! Like I haven't tried that one already! It doesn't matter what file name I input it will never accept it.
    So what am I supposed to do now? Ditch Windows and go back to Linux? Surely, Microsoft doesn't like the sound of that. Sure, I could reinstall Linux or run a Linux live system to correct the problem. But what good is Windows then? I might as well switch to
    Linux altogether.
    After doing some research I now know by fact that it's (kind of) possible to rename files from UNIX and UNIX-like operating systems to those compliant with Windows by using something called file name character translation. To some level this is essential and
    necessary for Windows interoperability with other operating systems (Windows is not the only operating system in the world). But this seems to be very complicated and I can't get my head around it. My brain is in overload. I don't know where to start.
    Once there was a...
    There's the Windows Services for UNIX (SFU) 1.0, 2.0, 3.0, 3.5. The first two versions were based on MKS Toolkit, a package licensed by Microsoft from MKS Inc. The later versions were based on the similar Interix product, after Microsoft purchased the company
    that made it.
    Then there's the new Subsystem for UNIX-based Applications (SUA). These are services for UNIX components. They are supposed to have Client for NFS v3 included as well. But the server components from the SFU line is missing (e.g. Server for NFS). These are included
    in Server editions of Windows.
    Then there's the Microsoft Knowledge Base article
    289627: "How to Enable File Name Character Translation". This article seems to describe exactly my situation.
    Windows and UNIX operating systems have restrictions on valid characters that can be used in a file name. The list of illegal characters for each operating system, however, is different. For example, a UNIX file name can use a colon (:), but a Windows
    file name cannot use a colon (:). If a UNIX user attempts to create a file with a Windows illegal character on a Windows Services for UNIX network file system (NFS) share, the attempt is unsuccessful and the UNIX client computer receives an input or output
    error.
    It goes further than that. At first glance, this KB article also seems to offer a solution to this exact problem, with examples as shown below.
    For example, the following maps the UNIX colon (:) to a Windows dash (-):
    0x3a : 0x2d ; replace client : with - on server
    I checked these values in charmap.exe and they are correct. Except for 2D not being a "dash", it's rather a hyphen ("hyphen minus" to be exact), but these two have pretty much the same appearance and they get interchanged a lot, I'm sure
    they are used to it by now. (Yes, the characters! They don't mind.)
    Then there's this registry key.
    HKEY_LOCAL_MACHINE\Software\Microsoft\Server For NFS\CurrentVersion\Mapping
    Well, of course, I don't have Server for NFS. So this is a dead end. Well, actually, it was a dead end from the beginning...
    1. First of all, I'm not working with a network share on a NAS or SAN storage. The files are on the local disk drive where Windows is installed, so that's a DAS for you.
    2. I don't have SFU! Well obviously, I'm on Windows Vista! So that means SUA!
    3. SUA are service components only. No server components. Can you guess what that means? Yeah... no "Server for NFS" since it's a server component.
    4. Windows Vista is a client side operating system! Server for NFS is only offered for use with Windows Server systems.
    5. Back to square one!
    So there you have it. They all lived happy for the rest of their lives...
    I'm stuck here. Can someone tell me what to do? I mean beyond the obvious option to use Linux to fixa a Windows problem? The NTFS file system itself supports colons in file names. It's Windows that doesn't, and so by default it proclaims it invalid character.
    Surely, even a Windows client operating system like Windows Vista should be able to allow the user to at least rename files with invalid characters to something more sensible (from the system point of view) and valid, if not being able to open them as they
    are. Just add some crazy voodoo code to it and it will work. If you can make it possible on Windows Server with UNIX user-mode subsystem on NT kernel, then what's stopping you from giving the Windows client system the same benefit?
    So what now? Purchase a Windows Server 2012 R2 license, copy my invalid files to a NAS share with NFS on a UNIX or Linux system, and have a go at the Windows registry and Server for NFS? Yeah... you're right, it's probably a bit over the top...
    On a second thought... I might as well install Linux again. There are countless situations where Linux has helped me solve problems related to, and more often than not caused by Windows.

    Essentially, Linux created some files with colons (:) in the name on a NTFS partition where I have Windows installed. I have since uninstalled Linux, but now I can only view these files in Windows Explorer. I can't open them, I can't even rename them to
    correct the problem. It's as if they don't exist, because of the invalid search paths.
    If I try to rename them in Windows Explorer I get following message.
    The file name you specified is no valid or too long.
    Specify a different file name.
    Well isnt' that something?... isn't that nice? Windows is able to display these files, but it doesn't allow me to open them and it certainly doesn't like me to rename them. So why is it whining about it then, when I'm trying to help? It says "try a different
    file name". Yeah, right! Like I haven't tried that one already! It doesn't matter what file name I input it will never accept it.
    So what am I supposed to do now? Ditch Windows and go back to Linux? Surely, Microsoft doesn't like the sound of that. Sure, I could reinstall Linux or run a Linux live system to correct the problem. But what good is Windows then? I might as well switch to
    Linux altogether.
    After doing some research I now know by fact that it's (kind of) possible to rename files from UNIX and UNIX-like operating systems to those compliant with Windows by using something called file name character translation. To some level this is essential and
    necessary for Windows interoperability with other operating systems (Windows is not the only operating system in the world). But this seems to be very complicated and I can't get my head around it. My brain is in overload. I don't know where to start.
    Once there was a...
    There's the Windows Services for UNIX (SFU) 1.0, 2.0, 3.0, 3.5. The first two versions were based on MKS Toolkit, a package licensed by Microsoft from MKS Inc. The later versions were based on the similar Interix product, after Microsoft purchased the company
    that made it.
    Then there's the new Subsystem for UNIX-based Applications (SUA). These are services for UNIX components. They are supposed to have Client for NFS v3 included as well. But the server components from the SFU line is missing (e.g. Server for NFS). These are included
    in Server editions of Windows.
    Then there's the Microsoft Knowledge Base article
    289627: "How to Enable File Name Character Translation". This article seems to describe exactly my situation.
    Windows and UNIX operating systems have restrictions on valid characters that can be used in a file name. The list of illegal characters for each operating system, however, is different. For example, a UNIX file name can use a colon (:), but a Windows
    file name cannot use a colon (:). If a UNIX user attempts to create a file with a Windows illegal character on a Windows Services for UNIX network file system (NFS) share, the attempt is unsuccessful and the UNIX client computer receives an input or output
    error.
    It goes further than that. At first glance, this KB article also seems to offer a solution to this exact problem, with examples as shown below.
    For example, the following maps the UNIX colon (:) to a Windows dash (-):
    0x3a : 0x2d ; replace client : with - on server
    I checked these values in charmap.exe and they are correct. Except for 2D not being a "dash", it's rather a hyphen ("hyphen minus" to be exact), but these two have pretty much the same appearance and they get interchanged a lot, I'm sure
    they are used to it by now. (Yes, the characters! They don't mind.)
    Then there's this registry key.
    HKEY_LOCAL_MACHINE\Software\Microsoft\Server For NFS\CurrentVersion\Mapping
    Well, of course, I don't have Server for NFS. So this is a dead end. Well, actually, it was a dead end from the beginning...
    1. First of all, I'm not working with a network share on a NAS or SAN storage. The files are on the local disk drive where Windows is installed, so that's a DAS for you.
    2. I don't have SFU! Well obviously, I'm on Windows Vista! So that means SUA!
    3. SUA are service components only. No server components. Can you guess what that means? Yeah... no "Server for NFS" since it's a server component.
    4. Windows Vista is a client side operating system! Server for NFS is only offered for use with Windows Server systems.
    5. Back to square one!
    So there you have it. They all lived happy for the rest of their lives...
    I'm stuck here. Can someone tell me what to do? I mean beyond the obvious option to use Linux to fixa a Windows problem? The NTFS file system itself supports colons in file names. It's Windows that doesn't, and so by default it proclaims it invalid character.
    Surely, even a Windows client operating system like Windows Vista should be able to allow the user to at least rename files with invalid characters to something more sensible (from the system point of view) and valid, if not being able to open them as they
    are. Just add some crazy voodoo code to it and it will work. If you can make it possible on Windows Server with UNIX user-mode subsystem on NT kernel, then what's stopping you from giving the Windows client system the same benefit?
    So what now? Purchase a Windows Server 2012 R2 license, copy my invalid files to a NAS share with NFS on a UNIX or Linux system, and have a go at the Windows registry and Server for NFS? Yeah... you're right, it's probably a bit over the top...
    On a second thought... I might as well install Linux again. There are countless situations where Linux has helped me solve problems related to, and more often than not caused by Windows.

  • Select appreciate components on Mopz for XML.Stack file on CD51033594 1-3

    Dear Experts !
    I have install ERP 6.0 EhP 4, then I use SAPehpi 7.0 tool to update software components from CD51033594 1-3, but in processing, It have error XML.Stack. Please show me how to select right component for XML.Stack from CD51033594 1-3.
    Thanks and Best Regards. I hope, you can support for me as soon as possible

    Dear Expert !
    Fist thank you very much for your answers ! I have installed a ABAP System on ERP 6.0 EhP 4 product with CD source from SAP Market : 51036888_13,51036902,51036767_5. And I need update my system from CD source 51033594 by SAPehpi 7.0 tool. But when processing update by SAPehpi 7.0 tool, It required a XML.Stack file. So how to I can select right XML.Stack file for my system ERP 6.0 EhP 4 on Solution Manager Maintenance Optimizer. Please help me as soon as possible. Thanks and Best Regards !

  • Stack File

    All:
    We are upgrading our ECC environment to EHP4. We are creating stack file in Solution Manager to download required packages. We created stack file for our Development environment and trying to use same file with replacing SID and Message server name for our QA environment.
    Can we copy existing stack file and use for other system? EHPI tool is not recognizing copied stack file.
    Thanks,
    Miral.

    Hello,
    Next time, when you select the product version and then you get a choice of systems, you may select all the systems in a given logical component. This is the way to generate the XML for the three systems.
    Right now you still may select the QAS and PRD system and save yourself the trouble of running Maintenance Optimizer three times, one for each XML.
    Best regards,
    Miguel Ariñ

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • I own a website and my customers download zipped files. Until yesterday everything worked great. All of the sudden they are getting a message that the file is invalid or corrupt. This does not happen in Chrome.

    I own a website selling digital files. My customers receive an email after they place their order with a download link. Up until yesterday (for the past 3 years to be exact) everything worked smoothly. I have not changed one thing on my site or cpanel. Now customers get an error that the file is invalid or corrupt when they try and download with firefox. The links work fine with chrome. Please tell me there is a solution. This is causing major trouble!!!

    You can get a "Corrupted Content Error" error if there are multiple location redirects send via the HTTP response headers.
    *http://www.mozilla.org/security/announce/2011/mfsa2011-39.html
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances
    A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • CS5 no longer loads: preferences file is invalid. [was: need tech help]

    My copy of CS 5 no longer loads. get a message stating ".... could not initialize Photoshop because the preferences file is invalid 9 it was deleted ) " how do I fix this ????

    If its just that the Preference files are corrupt you can have Photoshop Delete them and generate a new set. Start PS an immediately press and hold Ctrt+Alt+Shift reply yes to Photoshop Prompt about deleting your preferences.

  • Video rendering : Could not complete the Render Video command because the settings in the file are invalid. What is this?

    not sure how to get past this?

    0s x 10.9.5
    2.9Ghz Intel Core i7
    16gb ram
    Intel HD Graphics 4000 1024 MB graphics
    Adobe CC 2014
    When I was half way through exporting it. That message came up.
    Could not complete the Render Video command because the settings in the file are invalid.

  • File name invalid/too long error

    When I try to import folders purchased from eMusic into iTunes, I sometimes get a message: "Attempting to copy to the disk "C:\" failed. File name invalid or too long. Some of the tracks may transfer, but others may not. Can anything be done about this? Thanks for any suggestions.
    Precision   Windows XP Pro  

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

Maybe you are looking for

  • Can Encore Use Premiere's Preview Files?

    I've got some very heavy PP projects that render very slow in Premiere.  8 hour export for 30 minute video if previews aren't used, and 1 hour if preview renders are used. Is there a way to use those previews from Premiere in Encore instead of reproc

  • Pages froze while working on a document and doesn't respond anymore. What can I do to reopen it ?

    Pages froze while working on a document and doesn't open anymore. What can I do ?

  • REPORT ON PROJECT

    Hi PS gurus, Any report is there which can give details about a)Total cost incurred for material procured for perticular project b)Total cost incurred for Activities for the same project till date? thanks in advance

  • Java.lang.StackOverflowError - Weblogic 9.1

    We have enabled SSL configuration in our Weblogic 9.1 and see below StackOverflow exceptions with com.certicom messages. <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1240850236463> <BEA-000802

  • Help "packaging" a XE DB

    Hi, I just finished working on a small java application that uses XE as its database. I want to email my app to friends to test it, however the only solution I found is to have them download XE, install it, run my SQL creation scripts, and then they