EHP5 Upgrade - Getting error in MAIN_NEWBAS/STARTSAP_NBAS
Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_SYSTEM_FAILURE (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=accagtci, GWSERV=sapgw19, SYSNR=19
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.69.18.210:3319' not reached
TIME Tue Oct 18 11:10:31 2011
RELEASE 720 COMPONENT NI (network interface)
VERSION 40 RC -10 MODULE nixxi.cpp
LINE 2897
DETAIL NiPConnect: 10.69.18.210:3319
SYSTEM CALL connect
ERRNO 239 ERRNO
TEXT Connection refused
COUNTER 7
System start failed
I tried system is Up, I also stopped & restarted it manually but same problem.
Can any one help in this regard,
Sriram
Edited by: skb2909 on Oct 19, 2011 7:21 AM
Hi found the cause for the error
more stderr1
(11990) New Child Process created.
(11990) Starting local Command:
Command: ms.sap<SID>_DVEBMGS19
pf=/usr/sap/<SID>/SYS/profile/<SID>_DVEBMGS19_acc<sid>ci
MSG_SERVER died => MsSInit failed,
But not getting the solution what to do? can any one give some idea
Regards,
Sriram
Edited by: skb2909 on Oct 19, 2011 5:06 PM
Similar Messages
-
Unable to install photoshop cs4 upgrade. getting error message
unable to install photoshop cs4 upgrade. getting error message
but the error message says that Apple Power PC apps no longer supported.
You still need to contact the manufacturer. You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software -
Error in MAIN_NEWBAS/STARTSAP_NBAS Upgrade EHP1
Hi
We have errors in this downtime phase of our BI upgrade. It looks like the KERNEL hasn't updated correctly ?
When I run R3INLPGM the environment variables do not show.
The SCS 00 instance started o.k. and Instance 01 is partially up with DISPATCHER JCONTROL SDM SERVER0
WATCHDOG only running.
I've followed all recommendations of note 1165462.
The error I see on the SDT tool is below together with the errors I see when I try to STOPSAP for manual intervention on 00 or 01
I forced an end of the subsystem to do a manual APYSAP of kernel 69 but this has the same results.
Please advise thanks
David
SDT error
Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM DEST=BID, GWHOST=SATURN, GWSERV=sapgw03, SYSNR=03
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'SATURN.NFOODS.NET:3303' not reached
TIME Wed Jun 23 21:49:08 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2779
DETAIL NiPConnect: 10.222.40.91:3303
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 78
System start failed
STOPSAP Errors
stopsap bid 01
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Checking input parameters...
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
collectSystemInfo: found central instance DVEBMGS03 on host SATURN but
central instance already exists as DVEBMGS01 on host SATURN.
StopInstance: Stopping instance 01 of system BID on host SATURN is not
possible. System configuration can not be retrieved.
O4STPSAP: Stopping instance 01 of system BID on host SATURN failed.
Errors occurred in command.
Errors occurred in command.
CausedHi Miguel,
her wanted to say, that either the shadow during uptime or later the real instance during downtime restarts SAP several times and ALWAYS start saposcol as well. If this fails - which is a really crazy behviour - SAP shuts down again !
=> The easiest - especially during an upgrade - is to just comment the saposcol start in the start profile
Then you have repeat the upgrade after shutting down the instance completey with killing all proceeses and it should work fine ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de -
Error during MAIN_NEWBAS/STARTSAP_NBAS
Hello,
We are upgrading from 4.7 to ECC 6.0 EHP 5 and we are getting an error on phase MAIN_NEWBAS/STARTSAP_NBAS.
Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=ocean71, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.100.100.71:3300' not reached TIME Mon Jan 9 12:00:18 2012 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 2898 DETAIL NiPConnect: 10.100.100.71:3300 SYSTEM CALL connect ERRNO 79 ERRNO TEXT Connection refused COUNTER 866 System start failed Earlier, validating the profile failed, see INSTANCE.OUT
In the phases.log I see the following
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="ocean71", GwService="sapgw
00"
4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="ocean71", GwService="sapgw
00"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="ocean71", GwService="sapgw
00"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-1"
2EETQ354 Starting system failed, rc="0"
4 ETQ010 Date & Time: 20120109120018
Any help is appreciated.
Thanks
ScottHello Scott,
Please take a look at dispatcher and latest work processes trace files for the reason of this problem. Try to start the instance manually and see.
This problem might occur when your system does not have latest kernel installed. Do you have the latest target kernel?
If not, please update kernel and resume the upgrade. It should be working fine.
Thanks,
Siva Kumar -
New mac 21.5, tried to upgrade to Yosemite get error, what's up
Just bought an iMac, tried to download Yosemite upgrade, get error, what to do.
Since it's a new machine, contact Apple's Support and let them deal with the problem. You have 90-days free phone support
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
Ehp5 Implementation - System fails to start at MAIN_NEWBAS/STARTSAP_NBAS
Hello,
I'm running an Ehp5 implementation from ERP 6.0. Ehpi is stuck in step Downtime during phase MAIN_NEWBAS/STARTSAP_NBAS with the following error:
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=sapapt01, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.10.1.21:3300' not reached
TIME Mon Jan 16 23:03:11 2012
RELEASE 720
COMPONENT NI (network interface)
VERSION 40 RC -10
MODULE nixxi.cpp LINE 3286
DETAIL NiPConnect2: 10.10.1.21:3300
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 226
System start failed
I checked the system instance and it was down. When I try to start up it manually with startsap, I do not get any error:
sapapt01:ippadm 16> startsap
Checking IPP Database
Database is running
Starting Startup Agent sapstartsrv
OK
Instance Service on host sapapt01 started
starting SAP Instance DVEBMGS00
Startup-Log is written to /home/ippadm/startsap_DVEBMGS00.log
/usr/sap/IPP/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Start
Instance on host sapapt01 started.
The problem is that no work process is started nor dispatcher or message server. When I look at the instance work directory I see that the only files that are written are the following:
available.log
sapstartsrv.log
logsave.bin
dev_tp (but it's empty)
The content of sapstartsrv.log is the following:
trc file: "sapstartsrv.log", trc level: 0, release: "720"
pid 29149
[Thr 47879647924784] Tue Jan 17 00:51:54 2012
No halib defined => HA support disabled
CCMS agent initialization: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
SapSSLInit failed => https support disabled
[Thr 1079777600] Tue Jan 17 00:51:56 2012
AutoRestart thread started
Starting WebService thread
Webservice thread started, listening on port 50013
Trusted http connect via Unix domain socket '/tmp/.sapstream50013' enabled.
trusted unix domain socket user is starting SAP System at 2012/01/17 0:52:04
The startsap_DVEBMGS00.log at the sidadm home directory shows the following:
Trace of system startup/check of SAP System IPP on Tue Jan 17 00:51:54 ART 2012
Called command: startsap start
00:51:54
Starting Startup Agent sapstartsrv
00:52:04
Instance Service on host sapapt01 started
00:52:04
starting SAP Instance DVEBMGS00
00:52:04
Startup-Log is written to /home/ippadm/startsap_DVEBMGS00.log
00:52:04
/usr/sap/IPP/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Start
17.01.2012 00:52:05
Start
OK
00:52:15
Instance on host sapapt01 started
The /var/log/messages content is the following:
Jan 17 00:51:56 sapapt01 SAPIPP_00[29149]: SAP Service SAPIPP_00 successfully started.
I can't find any clue why the system processes are not starting. The phase is the next after kernel upgrade from 700 to 720, so I believe it is related to the switch and maybe my kernel is not correctly updated or something is missing.
Please let me know any suggestion to know why the system is not starting.
Regards,
AlejandroHi,
No object was removed with the cleanipc command, anyway I've rebooted the server and then started db and sap again. Now the dev traces are written.
Output of the cleanipc command:
sapapt01:ippadm 42> ./cleanipc 00
Show/Cleanup SAP-IPC-Objects V2.3, 94/01/20
===========================================
+----+
| To inhibit destruction of valid SAP-IPC-Objects |
| during shutdown, this program requires now |
| special options for removing IPC-Objects. |
+----+
Running SAP-Systems (Nr)...:
---- Show IPC-Objects of Sap-System 0 -
Number of IPC-Objects...........: 0
Summary of all Shared Memory....: 8802.0 MB (may be incomplete when not in superuser mode)
Number of SAP_ES files found:.............: 0
Number of SAP_ES files removed:...........: 0
dev_w0 trace file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid IPP
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 29183
M
M
M Tue Jan 17 03:23:58 2012
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000
-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 29183) [thxxhead.c 1290]
M ThInit: running on host sapapt01
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '/usr/sap/IPP/SYS/exe/run/dboraslib.so' ...
B Library '/usr/sap/IPP/SYS/exe/run/dboraslib.so' loaded
*B *** ERROR => Version mismatch between kernel (700.08) and DBSL shared library*
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c 10524]
M
M Info for wp 0
M
M pid = 29183
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
The kernel version seems to be 700 here, I don't know why because when I check the disp+work -version is 720.
Regards,
AN -
Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase
We are upgrading from 4.7 to NW 7.0 (SP#5)
SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
\usr\sap\T03\DVEBMGS15\work
The upgrade tool reports this error.
Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
Last error code set: RFC call to subst_get_uvers failed with key
RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'CSIAS9:3315' not reached
TIME Wed Aug 31 15:09:36 2011
RELEASE 720 COMPONENT NI (network interface)
VERSION 40 RC -10
MODULE nixxi.cpp
LINE 2898
DETAIL NiPConnect: 165.156.101.209:3315
SYSTEM CALL connect
ERRNO 79 ERRNO TEXT Connection refused
COUNTER 550
Thanks
MattThanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
Thanks -
Getting error while upgrading rpd to 11g from 10g
Hello,
I have a rpd using obiee 10g.I want to open the same in obiee 11g,but getting error like need to run one file.
obieerpdmigrateutil.exe.
So i just run with -i,-u and -o option, that now i am getting this error->
The file 'DBFeatures.INI' is required for RPD migration and could not be located. Please ensure that ORACLE_INSTANCE is pointing to a valid instance directory.
ThanksHi akshara,
Firstly you need to upgrade from 10g to 11g,you need to run a .bat file from the path and follow some steps like collecting the artifact files like NQSconfig.ini,instanceconfig.xml,DBfeatures.ini with RPD and catalog to upgrade to 11g.
Here is the step by step process to upgrade and some artifact files manually given in step 2 of this blog http://prolynxuk.com/blog/?p=424
http://www.biconsultinggroup.com/images/VideoAlbum/OBIEE11gUpgrade11-4-10.pdf
(OR) standard documentation Start here http://download.oracle.com/docs/cd/E1457101/bi.htm_
If still the problem exists you manually update the DBfeature.ini file going to the specific location in 10g and copy them to 11g path.
hope helps you.
Cheers,
KK -
I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?
Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden -
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy -
When Upgrading From Ver.3.6.2 To Ver 3.6.3, Get error message (Platform Ver 1.9.2.2 Not Compatible With miniversion>=1.9.2.3
maxVersionDo a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010. It worked fine before with iCloud 2.1.2. Any solutions? I'm on Windows 7, Outlook 2010.
HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS
-
Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?
Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086
-
while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9. -
I am getting error 1001 on my ipad 2 while upgrading updates
When click to upgrade updates on my ipad 2 i get error 1001 and says please try again later.
What iOS version is currently on your iPad?
The error number is not included in the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
Problem with up-arrow on a long command line
I often use the "terminal" window to open up a connection (via ssh) to linux and unix boxes. While I'm logged into the remote computer and I try to edit a previous command, I notice that my display gets all fouled up if the command that I'm trying ed
-
Multi-channel digital audio HDMI with Onkyo pre-pro
Trying to get the HDMI to play nice with my home theatre pre-processor, an Onkyo Pro PR-SC886. so far: 1. I am setting the Sound Pref Output to the Onkyo, which it sees. 2. Setting the Midi Pref to HDMI/Onkyo which it sees. 3. I would like to get a d
-
Replace multiple pages en masse in an index template
We have an index page already set up and from time to time we need to replace the pages under each index. Is there any way that we can drag ALL the replacement pages so that it will automatically line up with the existing index. Each replacement pag
-
I have asked why the time for my receivements of mails is wrong, and someone told me that is because I have not set the clock in Thunderbird correct. But I cannot find where to do that???
-
Hello everybody, I am working on the following problem and I cant find a solution. Maybe you have an answer. I shot some footage on a 5D and cut the whole stuff in premiere cc. Then I used the link to speedgrade to do my grading. Now I have to do the