EHPI and DB2 DMS storage management
Hi Guys,
I am having a trouble with Enhancement package installer while applying enchancement packs to ABAP instances in DB2 environment. I am using DMS storage managementmethod in DB2 for tablespace management. While applying the enhancement pack1 for netweaver the installation tool asks for creation of new tables and I create the required tables spaces as I needed. The tool fails with insufficent space in tablespaces. However the tablesspaces are setup to grow when required not like assigned free space in a tablespace.The file system has total 16GB available and it only needs about 3GB. Since it can't see some required freespace available with in the tablespace it can't proceed.
1) Did any one face this issue. IF so how to overcome this issue.
2) Is there anyway we can bypass this check and cotinue with installation. In some steps we can jump with a password but there is no such thing to this step.
Your early reply is highly appreciated.
Regards
Srini
EHPI tool itself check how much space you needed in a tablespace. You have to add that space in tablespace then only you can proceedd otherwise it will always show the error...
thank sunny
Similar Messages
-
XSAN and TSM (Tivoli Storage Manager)
Hello,
I wanted to know if anybody had already used the TSM (Tivoli Storage Manager) solution from IBM to backup an XSAN?
From what I have read on the IBM tech guide, the solution is fully compatible.
Best regards,
CédricHello Cedric.
I have used IBM TSM 5.2 with XSAN for a whole year without problems.
Our Xsan environment have 15 mixed INTEL&PPC Workstation, 2 Intel MDC, OSX-OSXSERVER 10.4.9, XSAN 1.4.1
We have a 3584 LTO library with 2 frames, 4 drives LTO2 and 2 LTO3. But we use only LTO3 with TSM from MAC. Our IBM TSM Server is a PSeries 630.
Now we are looking for a MAM system that can manage a proxy version of our archive. Parcial restores features could be very helpful for us.
CCL -
About DB2 Automatic Storage Management
Does it mean that DB2 will create/resize containers of table spaces automatically if we use Automatic Storage Management to manage?
If yes, when DB2 will create new container within a table space?
If yes, when DB2 will resize containers within a table space?
Please advise. thanks so much.
JamesThanks for you reply, I still have some questions.
Q1: When the size of table space need to be increased, by default, which one will occur, (1)DB2 will increase the size of existing container, or (2)add new container?
Q2: When DB2 add new container, whether the new container is added as new stripe set, or added as existing stripe set. I think it should be new stripe set since it can avoid rebalance.
Q3: What's the threshold to trigger size increasing? Can we configure it?
Thanks so much
James -
[Solved] RAID 0 with Arch Linux and Intel Matrix Storage Manager
I just bought a brand new DELL Studio desktop and it has 2 500 HD's which I would like to run in RAID 0. I've setup the BIOS to run the RAID 0. Now I want the arch linux installation to recognise the volume. I followed the guide on the wikipage
http://wiki.archlinux.org/index.php/Ins … _Fake-RAID
but /dev/mapper doesn't show anything after modprobing the modules and installing dmraid. My controller is a intel matrix storage controller, so what module should I modprobe because sata_sil isn't the right one.
Regards
André
Last edited by fettouhi (2008-12-15 10:57:18)you have a separate /boot partition, so your menu.lst must say :
root (hd0,0) # the partition including /boot
kernel /vmlinuz26 ... # without leading /boot
initrd /kernel26.img # without leading /boot
(in grub, / is the root of the partition that was set with the root command, your vmlinuz26 and kernel26.img are in (hd0,0)/, not in (hd0,0)/boot/)
did you install from core CD or from FTP ?
there was a dmraid update few weeks ago that modified device names that dmraid creates :
it add "p" before the number of the partition (your iws...Volume0 don't change, but your iws...Volume0# change to iws...Volume0p#)
if you installed from core CD, you will only need to add this "p" when you will upgrade dmraid (or the full system)
(you will then need to edit both /boot/grub/menu.lst and /etc/fstab)
if you installed from FTP, you need to add this "p" now, as you installed last version of dmraid -
P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?
Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date 2009-07-27
Your System OS XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description Ver: 8.9.0.1023
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date 2009-02-23
Your System OS Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date 2007-11-02
Your System OS Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager. -
Oracle's 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network
devoted to the same topic. Whats new may be said ?
The target of message is to highlight the optimal sequence of steps
required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.
Oracleasm library install is done immediately after creating "oracle"
linux account and "dba" group to be ready for ASM Instance creating during
the first Installer run supposed to build it. ASM instance for disks and disks
group management is created the first by Installer along with the disks group
for database supposed to be built during the second run of Installer and to be
placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors.ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.
With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM
using standard Linux I/O system calls.It requires to create RAW devices for all
disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml[oracle@casa database]$ df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 70557084 8674712 58298272 13% /
none 387852 0 387852 0% /dev/shm
/dev/hdc 656964 656964 0 100% /media/cdrecorder1So, you have 58298272 bytes available, which is 55MB, and the installer asks for 60 ;) You should probably use df -h instead of df -k...
PS where are you planning to install to with only 55MB available anyway?
~Jer -
Oracle 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected]Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected] -
my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do
it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing -
Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit
I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Managing files and space in storage repositories
What options are available for moving virtual machine images and resources between storage repositories in OVM 2.2? The documentation does not seem to mention this at all.
As the root repository is nearly full, I have added a second repository. I expect there is little automation here so that I also need to manually move some disk images from the root repo to the new auxiliary repository.
Is there a special procedure I need to be aware of, or can I simply shut down a VM, move the folder and start the VM?
Can multiple disk images belonging to the same VM be distributed across multiple repositories, or must they all reside in the same folder?
Thanks,
Royroynor wrote:
Is there a special procedure I need to be aware of, or can I simply shut down a VM, move the folder and start the VM?I usually follow this process:
1. Shutdown the VM
2. Unregister the VM from Oracle VM Manager (but DON'T delete the files)
3. Manually move the VM directory from one running_pool folder to another.
4. Discover the VM in Oracle VM Manager
5. Start the VM
Can multiple disk images belonging to the same VM be distributed across multiple repositories, or must they all reside in the same folder?Oracle VM Manager will only create disk images in the same folder as vm.cfg. Shared disks will be created in the repository that has the most amount of free space available. You can use this to your advantage by creating/discovering shared disks in any repository and attaching them to your guest. Just remember not to attach the same shared disk to multiple guests! -
What is data archiving and DMS(Data Management System) in SAP
what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PMHi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards. -
Storage Manager and Windows 2012 Deduplication
Does anyone have Storage Manager working with the deduplicated volumes in Windows 2012? It works fine on 2012 itself, but when I attempt to move data to or from a deduplicated volume I get the following error:
182: the requested operation is not supported.
The error seems pretty self explanatory. But I'm really hoping there's a way to get it working. We're planning to do a complete teardown and rebuild of our storage and this could be a deal breaker for whether we use Storage Manager at all to manage user data.
Engine Version: 3.1.0.4
Windows 2012 Standard
Active Directory Schema Not ExtendedOn 4/17/2013 10:46 AM, scunha wrote:
>
> Does anyone have Storage Manager working with the deduplicated volumes
> in Windows 2012? It works fine on 2012 itself, but when I attempt to
> move data to or from a deduplicated volume I get the following error:
>
> 182: the requested operation is not supported.
>
> The error seems pretty self explanatory. But I'm really hoping there's
> a way to get it working. We're planning to do a complete teardown and
> rebuild of our storage and this could be a deal breaker for whether we
> use Storage Manager at all to manage user data.
>
> Engine Version: 3.1.0.4
> Windows 2012 Standard
> Active Directory Schema Not Extended
>
>
scunha,
Could you send an email to [email protected] explaining what
you're doing and providing some details of your deduplication settings?
We'd like to look at this in more detail.
- NFMS Support Team -
DMS and cFolders for requirements management
Hello SAP Gurus
Iam suggesting SAP DMS and cFolders for requirements management for an Automobile OEM client.
The requirements documents consist of software, hardware, mechanical etc...
Did any of you implement these modules for a similar scenario?
I want to know the expert feedback in this scenario.
Regards
Prasad KHi Prasad,
Given the way i understand 'Requirements Management', it's a holistic approach which includes identification, documentation, analysis, prioritization and agreement on requirements and then controlling the changes and communicating it to relevant internal and external stakeholders.
This is an ongoing process throughout a project.
In this perspective, DMS(for handling documentation),c-folders(collaboration,communication wrt ERP objects like docs,BoM et-al),c-projects(colloborative pjt mgmt) and ECM(managing changes) would be an ideal proposition to handle requirements management in Automitive sector effectively. You may explore other solutions for a finer degree of control.
Regards,
Pradeepkumar H. -
Install Real Application Clusters (RAC) and Automated Storage Management (A
Do I have to install Real Application Clusters (RAC) and Automated Storage Management (ASM) for ETL
I have installed Oracle 10g Release 1 on WIndows 2000 with datawarehousing option.
Is it ok
Or do I need to install Oracle database again.
Please helpGreg,
From what you describe you did exactly the right thing. The runtime platform service will by default run on DWH01, but you can shut it down on that node and have it run on DWH02 (in case you wanted to bring down DWH01 but still run Warehouse Builder processes). Note that we strongly recommend using the net service name in the location registration in the deployment manager (so that you automatically take advantage of the client-side load balancing feature of RAC (as well as the server-side load balancing)).
Thanks,
Mark. -
Difference btw SAP Records managements and SAP DMS?
can some one pls tell me wat is the difference between records management and sap dms...
thank you.Hi Vivek,
perhaps some remarks to SAP Records Management. SAP Records Management (and SAP Case Management) is a powerful infrastructure for creating cross-component application since you can organize any SAP and Non-SAP information object as a record (tree) in a role based view.
One classical application is the HR personnel record. You collect documents (archived documents as well as DMS documents (with versioning)) together with personnel master data and other information. For each employee there is a record instance.
Another application is a machine record for a machine producer. It is a collection of SD objects and of engineering documents.
A record can also be business partner record collecting information about the business partner and for example other records that refer to the business partner.
Since SAP Records Management is designes as a Service Provider Framework you can integrate any kind of information objects both in SAP and in non-SAP systems.
So, also SAP DMS services can be wrapped as SAP Records Management service provider and hence be used in SAP Records Management applications.
The focus of SAP DMS is the handling of engineering documents and their behaviour in production. Based on SAP Knowledge Provider it is more a document management service.
SAP Records Management is stressing the aspect of building cross component applications and their business flow. SAP already provides a lot of standard service providers but you can also build your own service providers and hence integrate your own objects.
For more information, see the documentation and get a first flavour by starting the transactions ORGANIZER and SRMREGEDIT.
By the way in contrast to SAP DMS, SAP Records Management is part of NetWeaver.
Best regards
Torsten
Maybe you are looking for
-
Whenever i try to sync music, apps, videos etc. on to my ipod touch from my home computer it wont let me apply where it says 'apply' as it is sort of shaded out. This started happeneing when i downloaded IOS5 so i got a replacement and it did not wor
-
Acrobat 9.4.2 won't "save"
When I open PDF documents in Adobe Acrobat Pro 9.4.2, the "Save" option is grayed out. It will let me "Save As ..." It's not a major issue, but it's annoying! I'm running Windows 7 Home Premium 64-bit edition. Any ideas would be welcomed. Thanks. Tim
-
How to open a form of an already opened Access project from another application?
Dear forum members, I have this problem: I have multiple modules in both Excel and Outlook that open Access forms. Therefore is use simple codes like these: Sub Regelopenen() ActiveWorkbook.FollowHyperlink "\\SERVER\Documenten\JBO\" & Environ("comput
-
ITunes Store not updating my podcast feed
Feedburner is updating my feed but it is not registering in iTunes or Stitcher. Any ideas why? http://feeds.feedburner.com/unbelievablepodcast
-
Issue with appletalk, can't reinstall printer, help!
Hi all, Right now I'm having an issue with my older laser printer not showing up. It's installed, but when I go to print, I get a message that AppleTalk is inactive. So I go to the networking area and lo, the AppleTalk is indeed active. What is one t