EHS-Error while editing Report template
Hi Gurus
I am getting a vague error while trying to cancel release of existing report template. I need to edit the same. Hence i am cancelling the release. Please let me know if any of you have got this error before and how did you solve it?. Also i have done changes in Dev and QA. But i get this error only in prod.
The error details are as below.
Unable to write log record for document 1
version 00
"Unable to write log record for document 1050010 version 00"
Message no. C$760
Diagnosis
You attempted to change the status of a document. The system creates a
log record for this activity. However, the system was unable to create
this log entry.
System Response
The system is unable to write the log entry.
Procedure
Notify your system administrator.
TIA
Regards
Murali
Hi
I have solved this issue. It was an authorization issue. I didnt have authorization for CV02N.
Thanks and Regards
muralidharan
Similar Messages
-
Timeout error while running Report
Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
VishalAs Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30. -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Broadcast Error while broadcasting a template
hi...
I am facing error while broadcasting a template as a PDF file.
Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
I cant find any other details for this error.
I am able to broadcast the query.But i am not able to broadcast the template which includes the same query.
When i tried to assign a different query to thesame template, its working.It means that template is working fine.
The problem is the combination of the actaul query and actual template is not working.
I also checked with the support desktool and the configuration settings which are fine.
There are no error logs found. When we execute the template for broadcast it should initially communicate with the BW system and then from there we wil recieve mail.
But here when i am executing i am not able to see any logs in BW syetem, the report is not getting communicated with the BW system.
There are 4 queries with their corresponding templates for which templates are not getting broadcasted. The queries are designed for top n customers. These queries have offsets and also for one of the query there are exit variables.
I want to know that is there any problem with the query or some setting problem which will make the combination of query and template work properly i.e broadcasted properly.
Can anyone please provide some inputs????this seems that the Portal engine set up with your companys portal and Web application designer is not working...
u mighte need toa pply OSS notes.
have you checked it on SAP service market place. -
RWI 00236 error while opening report in PDF mode
Hi All,
I'm getting the RWI 00236 error while the report is opened in PDF mode.I have searched on this error but couldn't got the answer so far.My report is quite a large one and i wont get any error while running simple reps.If this is something to do with temp files deletion at server side ,pls let me know which temp files needs to be deleted bcoz there quite few temp files at server level.Ofter getting this error msg ,the report browser hangs up and i needs to logout completely from infoview.
Im using BO X1r2 version and service pack is SP4.Hi,
Are you able to open other reports in PDF Mode or not
If you are not able to open any report in PDF format then try to follow below mentioned steps.
1. Open Adobe Acrobat Reader. Click Edit > Preferences.
2. Click Internet in the Categories column of the Preferences property sheet.
3. Choose Display PDF in browser check box as shown below.
4. Click Ok, Adobe will reconfigure the setting, close Reader.
5. Now, when we view in pdf format in IE, we might see one message
6. So, when IE is launched, go to Tools>Manage Add-ons>Enable or Disable Add-ons and then enable
"Adobe PDF Reader Link Helper" add-on. Click Ok, restart IE.
Cheers,
Suresh Aluri. -
Property Tree IN Edit Report Template
Hi Expert,
I am working on labels in WWI, and wanted to generate a report for which I need my customize property tree in CG42. Please suggest how to get property tree in Edit report Template(CG42). Attaching the screenshot for the same.
Advance Thanks,
Mayank AgrawalDear mayank,
You can create a new node in the property tree only by customizing.
First you need to know what characteristics it should have as this is part of a class.
I have listed the steps below which might be helpful.
First Create a characteristic(s) for the node which is actually a Value assignment type using CT04.
Create a Class using CL01 with class 100 and Assign all the characteristics to this particular class.
identify under which property tree, your node should appear.
for eg: Goto the txn CG02, select any real substance, in the property tree of IH, select any value assignment type under a node Limit values and regulations such as labelling(EU) and press F1 to view its description and u will find the Value assignment type as SAP_EHS_1023_001.
In customisizing, Select Setup Property trees under EHS - basic data tools - specification management - Specification database structure - Settings for value assignment type .
Select your property tree eg IH, select value assignment type assignment and insert your node.
By this way, U will be able to insert your node in the property tree. Now exit the screen and goto txn CG02 to find your node listed in property tree.
Go to Set Up Property Trees under SPRO; select the standard property tree and click on Value Assignment Type and assign the Class to a Node under which you want to.
i.e adding a node in a property tree.
Prerequisites for adding an node to a property tree.
Creation of class (T_code CL02) & Charactertics (T_Code CL04)
Assigning the charactertics to class.
Assigning the VAT to the Property Tree
Now you need to assign the VAT to the property tree, make sure you give the correct ID & level so that the new node appears in the exact level as you desired.
Check the following threads as well.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/286ec70a6c11d28a220000e829fbbd/content.htm
http://help.sap.com/saphelp_470/helpdata/en/a7/286d1d0a6c11d28a220000e829fbbd/content.htm
http://scn.sap.com/docs/DOC-40989
Regards
Dhinesh -
Error while generating report in RAR
Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DKHello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
I am getting following error while displaying report in sap business one-
<b>Internal error (-101) occured [Message 131-183]</b>
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.Hi Yogesh,
I haven't installed any patch on my client machine.
Regards,
Dilip Kumbhar -
Error while running code template mapping between two oracle tables
Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin -
Error while instantiating report Z_RD_ABSENCE_REPORT
Hi Guys,
we have just patched BWD, and while testing the broadcast setting i came across the following error.
Error while instantiating report Z_RD_ABSENCE_REPORT
Notification Number RSBOLAP 014
I am opening report designer and when i publish via Bex Broadcaster this message is shown. I have checked SDN and sap market place but most of the soultion seem to focus on WAD.
My feeling is that it is a JAVA error and is somethng basis might be able to fix.
Please can anyone let me know if they have come across this problem before, and help would be much appriciated.
Thanks
ForhadHello Forhad,
RSBOLAP 014 is a issue regarding communication between ABAP (backend ) VS BI Java side.
Read the note 937697 and follow his manual instructions.
This note will start the BI Diagnostics. There you will see a red mark with RSBOLAP issue. COrrect this red mark following the recommendation on "Action" field.
Good luck.
Edward S. John -
Error while opening report in Infoview
I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at javax.xml.parsers.SAXParser.parse(Unknown Source)
at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
RameshHi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne -
ORA-29861 Error while editing or adding search keywords in a File Item
Hi,
We are getting the following error while editing or adding search keywords to a file item:
ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
DAD name: portal30 PROCEDURE : PORTAL30.wwv_edit_tab.edititem
Can you please tell us what went wrong.
ThanksVikas,
From the server error messages reference:
Cause: An attempt has been made to access a domain index that is being built or is marked failed by an unsuccessful ODCIIndexCreate or is marked unusable by a DDL operation.
Action: Wait if the specified index is marked LOADING Drop the specified index if it is marked FAILED Drop or rebuild the specified index if it is marked UNUSABLE.
It's possible you were loading the document while the index was being rebuilt. Search all_indexes where DOMIDX_STATUS <> 'VALID' OR DOMIDX_OPSTATUS <> 'VALID' to find the offending index and rebuild it.
Regards,
Jerry
null -
Error while running report 10g
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid -
Getting error while posting reports on Unix Process Scheduler Server
Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas.
Maybe you are looking for
-
Clicking a link will not open a new tab
On a Win7 computer, Firefox 34.0.5 works fine for the administrator account. For the user account however, a new tab will not open when clicking on a link in a web page. The settings under options / tabs are all checked properly. I have uninstalled F
-
Without warning, ATV2, after plugging in to different television, begins boot process, Apple appears onscreen, then shuts off and begins reboot, and then cycles continuously thjis way. Starts to bbot, cuts off, then tries reboot. Can't
-
Is the purchase order number and purchase document numer both are same
is the purchase order number and purchase document numer both are same or different? thanks.
-
Is there anyway to create new folders to store photos on the Itouch 4th gen?
-
Slideshow photos don't show up-however they appear on the lower scrolling menu and
In IPhoto 11.. I can't see any of my 379 pictures in the slideshow format, however when I scroll down the sidebar they appear momentarily, and then vanish, they also appear in the bottom scrolling menu on the slideshow screen. I haven't had this pro