EHS SVT for UVCB Substance ( REACH REGULATION)
Hello,
I hope someone of you can help me.
I'm working for a new client ( oil refinery - benzine and so on), the aim of the project is to implement the EHS SVT module.
The substance involved in the process are UVCB substances, this means that based on REACH regulation they are substance of unknown or variable composition.
I don't know if is possible to track substance ( SVT module) without having information about component ( poor substance) and limits.
The description of component are ofter generic, like "linear fatty acid C8-C16", or like "A complex combination of hydrocarbons consisting primarily of paraffins, cycloparaffins, aromatic and olefinic hydrocarbons having carbon numbers predominantly greater than C3 and boiling in the range of 30°C to 260°C (86°F to 500°F)"
What i'm asking is: Do you know how to track this king of substance, which value assignment type I must use, with property tree and most of all how i can manage the composition??
Please someone of you let me know something or at least where I can find more information about.
Thanks in advance
Anto
Hello Anto
This is an option do go on:
UVCB substance: you need to establish in EH&S a "specification". You should use some identifier to describe the UVCB. You could prepare in customizing a new spec type (e.g. Z_UVCB) if necessary.
Then you prepare the REAL_SUB with the attached materials. In EH&S SVT Customizing you need to specify which property of type composition is to be used in the filling of the EH&S SVT tables (as well as the usage). Then you need simply to prepare the data record in the property.
Now in filling the CCRCT_EHS_COMP table will get a simple entry. If now one of the materials attached to your REAL_SUB is "imported" or "produced" (according to your set up of EH&S) the "UVCB" will be taken into account like a "LIST_SUB" or "PURE_SUB". IN EH&S SVT it is not of "interest" which spec type the substance have which need to be taken into account regarding REACH (please take a look on definition of CCRCT_EHS_COMP).
So from a technical point of view the UVCB will be tracked (if necessary). Now from legal point of view the topic is different. As now REACH is effected (01.12.2010 deadline) you must have preregistered or registered anything which need to preregistered/registered or you are not allowed to import/produce any more in REACH area And therfore you need to register the UVCB as well (which is possible "without" problems)
Now once again back to your questions:
1.) What i'm asking is: Do you know how to track this king of substance => Create composition of REAL_SUb with e.g. LIST_SUB or PURE_SUB
2.), which value assignment type I must use => a matter of decision in EH&S SVT set up; in other words: it is your choice! SAP EH&S SVT is shiped with some "standard customizing"
3.) , with property tree => make sure that you have implemented any !! OSS note related to EH&S SVT because there are some new properties to be included; if you use SAP standard tree and if you have prepared the new proeprties according to OSS etc. you will find them in "STANDARD" tree
4.) and most of all how i can manage the composition??
If have no idea what the problem can be (I do not understand your question)? Simply create one composition. E.g. you could define: 80 % aceton and 20 % UVCB
5.) Please someone of you let me know something or at least where I can find more information about.
=> there is a very good guideline available in a SAP OSS on SAP marketplace (Note 905726).
With best regards
C. B.
PS: may be you should switch FORUM. EHS is discussd here: SAP Environment, Health, and Safety Management (SAP EHS Management)
Edited by: Christoph Bergemann on Dec 2, 2010 8:47 PM
Edited by: Christoph Bergemann on Dec 2, 2010 8:48 PM
Edited by: Christoph Bergemann on Dec 2, 2010 8:49 PM
Edited by: Christoph Bergemann on Dec 2, 2010 8:51 PM
Edited by: Christoph Bergemann on Dec 2, 2010 8:53 PM
Edited by: Christoph Bergemann on Dec 2, 2010 8:54 PM
Similar Messages
-
Count for item records reaches 999 the second idoc gets triggered!
Hi Experts,
I have an issue. Sender is file and receiver is idoc with a header and item level records. Only one header and n number of records can be there.
Now we want to make this way that as soon as the count for item records reaches 999 the second idoc gets triggered.
Hints / Solutions Pls.
Regards,
Arnab .incorporate mapping logic such that for every 999 item records create new IDoc node
check with this UDF for IDoc node mapping, item records will be input to UDF
int count = a.length;
int k=999;
result.addValue("");
for(int i=0;i<count;i++)
if (i>=k){
result.addValue(""); // if records > 999, add IDoc node
k=k+999;
Do rest of the mapping accordingly -
How to set automatic e-mail alert for 90% threshold reach for MAXDBdatabase
Hi,
I want to set automate e-mail alert for 90% threshold reach for MAXDB database i.e. data area. I want to know where i can set the automate e-mail alert for data area in MAXDB database? As i have already have script for oracle tablespace alert if tablespace reaches 90% it sends me an auotmated e-mail.
Please let me know where to do the settings or any script available for MAXDB database data area automate e-mail alert....
Thanks,
NarendraHello,
What is the version of your database?
Are you SAP customer?
Please see the MAXDB documentation,
Review the Standard Events at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Glossary -> Event
And u201CMonitoring Free Memory in the Data Areau201D section at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Database Administration
-> Monitoring Databases
see example at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Tutorials ->Database Manager CLI Tutorial
-> Using the Event Dispatcher Function
-> Event-Controlled Sending of E-mails
Thank you and best regards, Natalia Khlopina -
Workflow erro: maximum number of nodes for a session reached
Hi
a number of workflows went into error with message maximum number of nodes for the session reached 11000 . what can be the reason . is there some settings thats need to be made in production . because it is working in dr3 and qr3Hi,
Check the condition on the loop for you workflow. It seems its getting into infinite loop.
Also check for the possibility FM which might be triggering your workflow is getting executed in an infinite loop. So it might trigger multiple instances of the same workflow.
Regards,
Niraj -
GR for controlled substance in WM
Is there a way to separate the receipt of controlled substances from the normal receipt in the GR area(storage type 902). We receive both types on same PO type. We have separate material handing processes once the PO is received. Controlled substances are sampled and handled by different personnel.
Is there way other than using special movement indicator or using fixed bin locations?
We are on ECC6.0
Thanks for your helpHi,
you can set up a separate WM movement type which can define separate storage type for GR area.
this movement type can be linked to IM movement type via OLMR. you can use a special movement indicator to reach that. special movement indicator is defined in the customizing and exist in the WM1 view of material master.so you can control the movement type according to different material.
if you do not like to use the special movement indicator, you have to create a new IM movement type for your GR which links a new WM movement type. and set this IM movement type for the user default in MIGO.
but why do not like special movement indicator?
Best regards,
Cliff -
SVHC checks not executing for pure substance
When checked for REACH SVHC for the Vend substances, check results shows as Compliance not ascertainable and calculated compliance status differs from existing status. These Vend substances have a DCT pulled in the production system and do not have any SVHC.
getting Errors like
Compliance data for product is missing from supplier
Speccification is not a ascertainable because of deeper level of product structure.
Calculated compliance status differs from existing status.
Kindly help
IsmailDear Anshul
SAP is using at many places "identification listings" of different kind. E.g. for hit list, for composition/spec listing, hazard inducer etc.purposes. For DG filling in most cases a different ident listing is used. Now it depends on how do you use SAP. There is a "standard" ident. listing to be used for DG purposes; you need therefore to compare the different ident listings and may be adapt the set up.
Any SAP standard is starting with "D_" in customizing (e.g. D_HITLIST etc.):
C.B.
PS: e.g. check: Identification Listing
Error in DG Filling
https://help.sap.com/saphelp_erp60_sp/helpdata/en/03/34981109d311d286e6080009b98822/content.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/EHSDGP/LOEHSDGP.pdf -
How do I write a URL correctly so that it works for me to reach a website?
How do I wwrite a URL so that I can reach my desired website for a movie?
frank
You can make a slideshow in iPhoto and use the Share -> Send to iDVD command. You can also make a slideshow in iDVD. The help on both apps is pretty good, have to checked it out at all?
Regards
TD -
Waiting for status to reach "Differential sync"
Hey guys, I recently set up MMA and created a couple of virtuals to migrate to Azure. Everything went OK, I was able to push the mobility service, and wanted to migrate the VM to Azure, but I've been waiting for the status to reach "Differential sync"
for some time now.
I know this is question is answered in the FAQ over here:
http://blogs.technet.com/b/srinathv/archive/2014/10/09/migration-accelerator-faq-and-known-issues.aspx but it just tells me to wait. I've been waiting for 24hrs now, and the information under "Volume Protection" isnt very clear to me. I
want to know what the status is, and how long it's going to take before I can start the migration. Now, for example; the resync in transit number. Yesterday, when I left the office, it was at 85. I thought it was 85% so I was hoping to migrate today,
but now it's at 800-something. Is this value expressed in bananas, or megabytes, or what?Hi Tom.
could you please share screenshot of the replication progress?
if you have still same problem. please send email to mmasupport. one of our engineer will connect with you through remote session and will assist you in this.
Thx-Gopi. -
Moisture value for Ingredients/Substance in Recipe Management
Hi All,
I have a scenario to capture Moisture as one of the Nutrient Value in a Nutrient group for all the ingredients which goes in the recipe and ultimately the Primary output should have the moisture value calculated...
- right now i am using the Total Solids layout of the formula to see the final Products Total Solids% and minus it with 100 to get the moisture value !!
- i tried with Moisture as value one value assingment in the nutrient group and entered the moisture value for all the ingredients similar to other nutrients like Carbohydrates, protein, fat etc....
but i did not get the expected value for Moisture (i believe this might not be the correct way!!) whereas other nutrients Carbohydrates, protein, fat etc... are coming as expected
my question in brief is there any other way to capture Moisture otherthan calculating it from the Total Solids% ?
many thanks in advance
yasarI'm not quite sure I follow exactly what your asking. But I think you are asking about two methods of calculating moisture.
You currently use 100 - Total Solids % = %Total Moisture.
But you looked at using Moisture of Carbohydrates + Moisture of protein Moisture of fat + etc..etc...
You are not getting the same values between these two methods.
Is that the question?
I wouldn't expect that you would. For one, water might actually be an ingredient in a receipe. It wouldn't show up as mositure from fat, protein or other ingredients. During the processing different amounts of the water might evaporate. The mixture might absorb water from the air. Some ingredients like eggs would contain free amounts of water. Every receipe could be different. In fact, every batch would be different. They migh be similar, but usaully never the same.
I would think your original method would be more accurate. But not really knowing the exact process and chemisty of what you're making its hard to know.
FF -
Substance from DG Handling for SVT
Hello EH&S Experts,
I would like to know if I´m right, so following situation:
We have implemented the EH&S Submodule Dangerous Goods Management, we don´t have a data provider for the substances.
Our current configuration is that we have the substances for as Spec. Type LS_UN_SUB. For each substance we have created a classification DG_CL_SUB where the materials are linked.
Now, we create the DG Master Records with the transaction DGE5. So everything is good.
Now I get a further requirement, to check if it is possible to implement the Substance Volume Tracking (SVT) in EH&S.
So, my question now is: is it possible to use the existing substances (LS_UN_SUB) for the SVT?
Or do I have to create new substances?
The main problem is that we don´t have a data provider and we create everything manually.
Thank you in advance and best regards.
ThomasHello Thomas
you can not use LS_UN_SUB specifications whcih you have generated to handle DG topics to handle the SVT topic. Normally you will use either the PURE_SUb or the LIST_SUBs in SVT.
PLease refer to data model on online help or SAP Note 905726 regarding SVT.
With best regards
C.B.
There is a chapter "Substance Volume Tracking " in online help of SAP. Here you will find basic information regarding this.
Keep in mind: based on you rSAP release you have further options in SVT. With Enhancement PAckage 5 new functionaliyt is available in this area
Edited by: Christoph Bergemann on Feb 28, 2010 12:44 PM -
Hi All,
I am new in EHS and I would have a look at it. Would you please share with me any start point (Link, document and so on) if you have? How and from where should I start?
I found just a book on Amazon but unfortunately it was out of stock
Thanks in advance,
OmidDear Omid
I have only shortly googled to get ideas about SAP HCM. I am sorry to say that I was not able to detect any overlap to SAP EHS solution; SAP EHS does have "only" some interface to SAP HR. So your starting position in EHS is "not very good". But that should not hinder you to consider SAP EHS as a potential interesting future option. If you drill down this FORUM you will find many similar examples. That means consultants from SAP FI and othere areas are interested as well in learning SAP EHS.
Only some short feedback regarding:
"EHS can affect MM or SD procedures"; this is a link in both directions. To use SAP EHS (for some purposes) you need to link SAP EHS and SAP MM; SAP SD is linked to SAP EHS mainly in the area of SDS/MSDS distribution and Dangerous goods handling; but other integration options do exist as well.Check may be:
Substance Volume Tracking using SAP EHS MANAGEMENT
Examples of Integration of SAP EHS Management into other SAP Solutions
The main integration points are quite good explained here::
Environment, Health and Safety (EHS) - SAP Library
and here:
Extension 5.0 for SAP EHS Management – SAP Help Portal Page
The topic of training / certification etc. is mentioned as well in document: "SAP EHS Management for Beginners".
E.g. SAP FI etc. links to EHS are discussed here: Error
or here: EHS : Waste Management ( Why PO is created)
As SAP EHS is a "big" module it is nearly impossible to give you additional guidelines. The main "hint" is: Component Extension solution is getting now a "hype"; therefore mans project seem to come up; SAP EHS classic is "old" to a certain extent; in most case there is only the need to prepare "small" changes and I assume most chemical companies using SAP do use SAP EHS since years and the REACH and GHS hype is "over" to a certain extent. Clearly on regular basis changes are needed; but no real "big projects"
So if you are interested in SAP EHS you should may be check "Component Extension" solution. Here the link to SAP HR is "very" closed (as we talk about Incident and risk handling for persons etc.
C.B -
Technical details of EHS REACh module
Dear Experts,
I am working in SAP EHS module for a chemical industry client.The module is Product Safety REACh, basically it is European standards compliance for environmental safety.
I am new to EHS module and technically,I find this module is a little different with class,characteristics and in ways of data fetching and display.
I would like to request SDN experts to share some technical material on EHS-Product Safety-REACh and commonly faced issues in this module.Folks who have worked in this module, kindly help.
Thanks in advance.
Cheers,UshaHi,
Mostly we will be working on the exits/badis.
Hope you have seen this link.
http://help.sap.com/saphelp_rc20sp02/helpdata/en/3b/9ad2e9683440c897d438c82fce7866/frameset.htm
Also you can check the pdf available at this link
https://cw.sdn.sap.com/cw/docs/DOC-118155
MOstly we will be referring to the function modules under package /TDAG/CP. You can have a look at them.
If you have any specific technical issues,please post it here.
Regards
Keerthi -
EHS Substance Volume Tracking RREGCH_VT program
Hi experts,
I am using SVT for volume calculating in the PRO scenario and it is not working as desired.
1. I execute RREGCH_FILL to get data from the specifications property tree and it is working properly.
2. I executre RREGCH_VT to get aggregate volume information but it is not getting any results.
The configuration I have done for "Specify Selection Criteria for Volume Tracking":
REACH / PRO / AUFK / AUTYP / 1 / Include / Equal to / 10
REACH / PRO / AUFK / AUTYP / 2 / Include / Equal to / 40
REACH / PRO / MKPF / VGART 0 / Include / Equal to / WF
Do you know any reason why this can be?
Many thanks and regards,
AlbertoHola,
Una consulta colega, mira dentro del arbol propiedades, en la clase de SVT, no me figura la sub-clase SAP_EHS_1023_057, que es una clase del sistema STANDAR de SAP.
Trabajo con el sistema ECC 6.0 y Package 09.
Debería estar, no la puedo visualizar con CL01, CL02, CL03, no me permite visualizarla, ni modificarla, ni crearla, nada; lo raro es que deberia aparecer sus caracteristicas, pero para el sistame no existe esta clase, ni sus caracteristicas y esto no puede ser por que es un elemento del Standar.
Con otro colega de otra copañia verficamos y en su sistema si esta por defecto esta Clase: "Registration (Company Specific): SAP_EHS_1023_057".
Que puede estar pasando, por que mi sistema no reconoce esta clase del standar?
Cualquier idea o comentario, te lo agradecería.
Saludos.
Alejandro González. -
Implementation questions for EHS
Hi All,
We will be implementing complete EHS module for our client. Does anyone has complete list of the questions one should be asking the business people to map them in SAP, Please forward that to me at [email protected]
Thanks in advance.
Best regards
KalingeriDear Vikram,
How to execute that BAPI. what are all the prerequisite to execute. we are using ECC 6.0. Are you using this BAPI to identify the questions?
With Regards,
Balachander -
Hi,
This is satya i want know about SAP EHS certification & course details in Hyderabad can anybody help me
Message was edited by: Colleen Lee - moving from Careers to Certification spaceDear Vinod
any of your question have been still addressed here. Check: SAP EHS Management for Beginners
Coming back to your questions:
1. Considering my profile can you give your honest opinion weather this would be the right time for to do the training in SAP EHS? => Currently there is a "hype" with Component Extension for SAP EHS Management; you will find job opportunities if you just use "google" and other platforms
2. I was told by one of the training institutes, based in Chennai, that currently there is no SAP Certification Exam for EHS, is this true? => yes: no certificate
3. What is the present Job Scenario for SAP EHS freshers in India & abroad, how one can target the global market? => refer to answers above; many companies do have locatons in India which deal with SAP (and SAP EHS as well); job opportunities come and go especially in area of EHS
4. Is online SAP EHS training advisible as i am short of time due to the work challange. => I do not have any experience with the online trainings; based on feedback of the community: training options in India seems to be limited, expensive and sometimes will not help for your career
5. Is thier only SAP EHS or something else & does SAP EHS covers the market requirement.
For Chemical industry (and related businesses) as well knowledge in SAP GTS is asked for often; Knowledge in the area of SAP BW and similar areas is helpful (topic of "EHS reporting" of any kind)
C.B.
Maybe you are looking for
-
How can i place more than one photo on the print sheet
im trying to place more than on photo on a sheet of photo paper, how do I do this
-
Happens when going to print.coupons.com. I click the "learn more" button on the message that the plugin has crashed, and I get sent to the Adobe Flash plugin crash info page on Firefox. They say just to reload the page. There is a button for this. I
-
Group Header not displaying on conditional suppression
I have a report that is used to audit controlled medications. It is grouped by patient and then by medication order ID. I only want to display the data when the patient has had their medication ordered more than once. I have a test patient who is
-
O visual do meu website ficou embaralhado no Firefox 12
The look of my website was scrambled in Firefox 12. My website appears correctly in Chrome and Internet Explorer, but in Firefox 13 he gets all jumbled at the bottom of the page. Can anyone help me? My website address: http://www.kitganhedinheiro.net
-
Uninstall an Adobe Master Collection after my computer failed
Hello, I bought an Adobe Creative Suite Master Collection CS5 in 2010. I get two licenses and I have installed it on my two mac devices: a mac book pro and a mac pro. A few days ago, my mac pro failed. I brought it to the Apple Store's Genius Bar but