EHS Waste Maangement - Function modules for entry doc WAE01
Hi All,
What are the function modules to be assigned for the fucntions which will be visible/avialable in entry document creation WAE01. Pls let me know what are the FMs should be configured for the following functions in SPRO (IMG->EHS->Waste mgmt->Disposal procesing->Basic setings for disposal processing->specify functions.)
A. Functions for application tool bar like 1.Post, 2. Split Document, 3. Post change 4. Transfer location 5. Clear, 6.Purchase Order, and 7.cancel material document
B. Simillarly for functions in function list 1. Display document for partner, 2.create purchse order, 3.display material, 4.display purchase requisition, 5.display waste, 6.stock overview, 7.display master data for generation, 8.stock for waste in WM, 9.Easy entry, 10.Assign partner, 11.create document with approval and 12.create disposal document
I know it is painful job for you guys but it is very urgent for me.
Regards,
Ram
Hi Ram,
Select the function (POST, CLEAR, etc.,) and assign the Document Category (under Display functions per Document Category)
The other possibility may be with Authorization.
Or
Check the attachment (Screen shots)
http://sapehs.googlepages.com/WM_ICON.doc
Regards
Srinivas Nookireddy
Similar Messages
-
Function Module for search help Exit
How to create a function Module for search help exits?
please explain in details with step by step process.Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
translate_to_upper = 'X'
tables
dynpfields = dynfields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
others = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
importing
output = p_vbeln.
select posnr matnr arktx into table help_item
from vbap
where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'POSNR'
dynprofield = 'P_POSNR'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you************* -
Function Module For Item Level Details of a Sales Order
Hi Guys,
I have to get the item level details for a particular sales document no ..I want to know if there is any function module existing for the same.
Also I need any function module for getting the contact information such as contact form (KNVK-ANRED),contact name(KNVK-NAM1),contact name(KNVK-NAMEV),Contact number (KNVK-TELF1).
Please let me know if anyone is aware of it.
Thanks in Advance,
Mayank<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
Is their any function module for deleting condition record i am trying
Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure -
Sample Outbound Function Module for IDocs
Hello All,
Does anyone have sample code for an outbound function module for an IDoc - they created themselves. Custom or extended? Weblogs, sample code will be useful
ty, dd
Message was edited by:
Demi DouglasHi,
Check this program:
REPORT zmatmas_idoc.
INCLUDE zmatmas_idoc_top.
INCLUDE zmatmas_idoc_selscreen.
INCLUDE zmatmas_idoc_formroutine.
START OF SELECTION
START-OF-SELECTION.
PERFORM get_data.
PERFORM create_idoc.
PERFORM distribute_idoc.
TABLES
TABLES: mara.
Structures
*Header
TYPES: BEGIN OF gs_h_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
aenam TYPE mara-aenam,
pstat TYPE mara-pstat,
END OF gs_h_mara.
*Item
TYPES: BEGIN OF gs_i_makt,
spras TYPE makt-spras,
maktx TYPE makt-maktx,
maktg TYPE makt-maktg,
matnr TYPE makt-matnr,
END OF gs_i_makt.
TYPES: BEGIN OF gs_i_mbew,
lvorm TYPE mbew-lvorm,
lbkum TYPE mbew-lbkum,
salk3 TYPE mbew-salk3,
vprsv TYPE mbew-vprsv,
verpr TYPE mbew-verpr,
stprs TYPE mbew-stprs,
peinh TYPE mbew-peinh,
matnr TYPE mbew-matnr,
END OF gs_i_mbew.
TYPES: BEGIN OF gs_i_mvke,
vkorg TYPE mvke-vkorg,
vtweg TYPE mvke-vtweg,
lvorm TYPE mvke-lvorm,
versg TYPE mvke-versg,
bonus TYPE mvke-bonus,
provg TYPE mvke-provg,
matnr TYPE mvke-matnr,
END OF gs_i_mvke.
TYPES: BEGIN OF gs_i_mlan,
aland TYPE mlan-aland,
taxm1 TYPE mlan-taxm1,
taxm2 TYPE mlan-taxm2,
taxm3 TYPE mlan-taxm3,
taxm4 TYPE mlan-taxm4,
matnr TYPE mlan-matnr,
END OF gs_i_mlan.
*Segment & control record
DATA: gs_segment_h LIKE zmara_h,
gs_segment_i1 LIKE zmakt_i,
gs_segment_i2 LIKE zmbew_i,
gs_segment_i3 LIKE zmvke_i,
gs_segment_i4 LIKE zmlan_i,
gs_control_rec LIKE edidc.
Internal Table and work area
*Header & Item
DATA: gt_h_mara TYPE STANDARD TABLE OF gs_h_mara,
gt_i_makt TYPE STANDARD TABLE OF gs_i_makt,
gt_i_mbew TYPE STANDARD TABLE OF gs_i_mbew,
gt_i_mvke TYPE STANDARD TABLE OF gs_i_mvke,
gt_i_mlan TYPE STANDARD TABLE OF gs_i_mlan.
DATA: gw_h_mara TYPE gs_h_mara,
gw_i_makt TYPE gs_i_makt,
gw_i_mbew TYPE gs_i_mbew,
gw_i_mvke TYPE gs_i_mvke,
gw_i_mlan TYPE gs_i_mlan.
*EDIDD & EDIDC
DATA: gt_edidc LIKE TABLE OF edidc WITH HEADER LINE,
gt_edidd LIKE TABLE OF edidd WITH HEADER LINE.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
*& Include ZMATMAS_IDOC_FORMROUTINE
*& Form get_data
FORM get_data .
SELECT matnr ersda ernam laeda aenam pstat
FROM mara
INTO TABLE gt_h_mara
WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
MESSAGE e003(zkaren_msgclass).
No data found according to the selection criteria
ENDIF.
IF gt_h_mara IS NOT INITIAL.
SELECT spras maktx maktg matnr
INTO TABLE gt_i_makt
FROM makt
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT lvorm lbkum salk3 vprsv verpr stprs peinh matnr
INTO TABLE gt_i_mbew
FROM mbew
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT vkorg vtweg lvorm versg bonus provg matnr
INTO TABLE gt_i_mvke
FROM mvke
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT aland taxm1 taxm2 taxm3 taxm4 matnr
INTO TABLE gt_i_mlan
FROM mlan
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
ENDIF.
ENDFORM. " get_data
*& Form create_idoc
FORM create_idoc .
*Control data
gs_control_rec-mestyp = 'ZKAR_MATMAS_MSG_TYPE'. "Message type
gs_control_rec-idoctp = 'ZKAR_MATMAS'. "IDoc
gs_control_rec-rcvprt = 'LS'. "Partner type of receiver
gs_control_rec-rcvprn = 'T90CLNT810'. "Partner number of receiver
LOOP AT gt_h_mara INTO gw_h_mara .
*Header data.
gs_segment_h-matnr = gw_h_mara-matnr.
gs_segment_h-ersda = gw_h_mara-ersda.
gs_segment_h-ernam = gw_h_mara-ernam.
gs_segment_h-laeda = gw_h_mara-laeda.
gs_segment_h-aenam = gw_h_mara-aenam.
gs_segment_h-pstat = gw_h_mara-pstat.
*Header segment
gt_edidd-segnam = 'ZMARA_H'.
gt_edidd-sdata = gs_segment_h.
MOVE gt_edidd-sdata TO gs_segment_h.
APPEND gt_edidd.
WRITE:/ gs_segment_h-matnr, gs_segment_h-ersda, gs_segment_h-ernam,
gs_segment_h-laeda, gs_segment_h-aenam, gs_segment_h-pstat.
*ITEM 1
LOOP AT gt_i_makt INTO gw_i_makt.
IF gw_i_makt-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i1-spras = gw_i_makt-spras.
gs_segment_i1-maktx = gw_i_makt-maktx.
gs_segment_i1-maktg = gw_i_makt-maktg.
*Item segment
gt_edidd-segnam = 'ZMAKT_I'.
gt_edidd-sdata = gs_segment_i1.
APPEND gt_edidd.
ENDIF.
ENDLOOP. "at gt_i_vbak
*ITEM2
LOOP AT gt_i_mbew INTO gw_i_mbew.
IF gw_i_mbew-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i2-lvorm = gw_i_mbew-lvorm.
gs_segment_i2-lbkum = gw_i_mbew-lbkum.
gs_segment_i2-salk3 = gw_i_mbew-salk3.
gs_segment_i2-vprsv = gw_i_mbew-vprsv.
gs_segment_i2-verpr = gw_i_mbew-verpr.
gs_segment_i2-stprs = gw_i_mbew-stprs.
gs_segment_i2-peinh = gw_i_mbew-peinh.
*Item segment
gt_edidd-segnam = 'ZMBEW_I'.
gt_edidd-sdata = gs_segment_i2.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
*ITEM3
LOOP AT gt_i_mvke INTO gw_i_mvke.
IF gw_i_mvke-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i3-vkorg = gw_i_mvke-vkorg.
gs_segment_i3-vtweg = gw_i_mvke-vtweg.
gs_segment_i3-lvorm = gw_i_mvke-lvorm.
gs_segment_i3-versg = gw_i_mvke-versg.
gs_segment_i3-bonus = gw_i_mvke-bonus.
gs_segment_i3-provg = gw_i_mvke-provg.
*Item segment
gt_edidd-segnam = 'ZMVKE_I'.
gt_edidd-sdata = gs_segment_i3.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
*ITEM4
LOOP AT gt_i_mlan INTO gw_i_mlan.
IF gw_i_mlan-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i4-aland = gw_i_mlan-aland.
gs_segment_i4-taxm1 = gw_i_mlan-taxm1.
gs_segment_i4-taxm2 = gw_i_mlan-taxm2.
gs_segment_i4-taxm3 = gw_i_mlan-taxm3.
gs_segment_i4-taxm4 = gw_i_mlan-taxm4.
*Item segment
gt_edidd-segnam = 'ZMLAN_I'.
gt_edidd-sdata = gs_segment_i4.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
ENDLOOP. "at gt_h_kna1
ENDFORM. " create_idoc
*& Form distribute_idoc
FORM distribute_idoc .
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = gs_control_rec
TABLES
communication_idoc_control = gt_edidc
master_idoc_data = gt_edidd
EXCEPTIONS
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
OTHERS = 5.
IF sy-subrc <> 0.
WRITE:/ 'Error'.
ELSE.
LOOP AT gt_edidc.
WRITE:/ gt_edidc-docnum.
ENDLOOP. "at gt_edidc
ENDIF.
ENDFORM. " distribute_idoc -
Function module for BSEG table
Hi Guru's,
SELECT bukrs
belnr
gjahr
budat
monat
waers
awkey
FROM bkpf
INTO TABLE i_bkpf_data
WHERE bukrs EQ pa_bukrs AND
budat IN so_budat.
SORT i_bkpf_data BY bukrs belnr gjahr.
IF i_bkpf_data[] IS NOT INITIAL.
SELECT bukrs belnr gjahr koart dmbtr wrbtr pswsl
kokrs kostl hkont aufnr lifnr ebeln buzei shkzg
FROM bseg
INTO TABLE i_bseg_data
FOR ALL ENTRIES IN i_bkpf_data
WHERE
bukrs EQ pa_bukrs AND
belnr EQ i_bkpf_data-belnr AND
gjahr EQ i_bkpf_data-gjahr AND
kostl IN so_kostl AND
lifnr IN so_lifnr AND
hkont IN so_hkont.
ENDIF.
I got performance issue on this Query..while accessing the data from BSEG table,its makes performance issue in my program so i want to improve performance of the program.i was analysed that BSEG table makes performance issue..
Hi..Anybody give the solution imporving this Query or give some function module for accessing BSEG table..
Note..I want to pass my selection inputs also into function module..i was seen some function module for BSEG,those are not satisfying the my inputs so those also making performance issue..
Regards
P.Senthil KumarHi Everybody,
About how to use this function Does anyone have an idea?
I've found it.
call function 'FI_DOCUMENT_READ'
exporting
i_awtyp = 'VBRK'
i_awref = vbfa_tab-vbeln
i_awsys = vbrk-logsys
i_bukrs = vbrk-bukrs
i_gjahr = vbrk-gjahr
tables
t_bkpf = xbkpf
t_bseg = xbseg
exceptions
wrong_input = 1
not_found = 2.
But this is not enough.
Best Regards Rasim. -
Hi Guys,
Can anyone give me the function module for CF23
Thanks and regards
Thamizhchelvan GDear Thamizhchelvan,
Check with this,
CF_UT_USAGE_FHM_ORDER_TEST Test whether PRT master is used in an order
CF_VB_AFFH_FROM_BT_FILL PRT allocation order: Fill database structure frm.Doc.Table structure
CF_VB_AFFH_POST PRT: Update PRT data order
COFD Order: PRTs detail screens
CO_FD_FHM_DETAIL_CALL Detail screens PRT management in orders
COFU Order: PRT overview
CO_FU_FHM_DETAIL_EDIT Call PRT detail screen of the order
CO_FU_FHM_LST_EDIT Maintain PRT overview in orders
CO_FU_ORD_AVAILABILITY_CHECK Availability check PRT in the order
Regards
Mangalraj.S -
Functional module for automatic creation of pur requisition & pur order
hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar rajuHi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore -
Function module for calculating planned and actual cost of production order
Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
SriniHi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran -
How to create the INBOUND Function Module for INBOUND IDOCs
Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
GaneshHello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe -
How to config Check Digits function module for Student Number Validation
Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi -
Function Module for FB01 Vendor line items postings in 3.1 Version
Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
SubbaHi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful. -
Function Modules for uploading the file
Hi experts ,
I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
Prompt replies will be rewarded.
TIA
AbhishekHi Abhishek,
How to use INSERT Statement..
Check this Sample Program..
TABLES:MARA.
DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
ITAB-MATNR = '123ABCDA'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
ITAB-MATNR = '123ABCDB'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
LOOP AT ITAB.
INSERT MARA FROM ITAB.
MODIFY MARA .
ENDLOOP. -
Function modules for the following
Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
AmitHi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY ,
p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY,
p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list
par_year = p_list1
IMPORTING
par_days = ws_n_days.
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list2
par_year = p_list3
IMPORTING
par_days = ws_n_days1.
For Concatenating the month and year into the date format
CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
<b>RP_CALC_DATE_IN_INTERVAL</b> Add/subtract years/months/days from a date
<b>SD_DATETIME_DIFFERENCE</b> Give the difference in Days and Time for 2 dates
<b>Also for checking valid date:</b>
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith. -
Function Modules for Data and Time
Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
Thanks in advanceHi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
<b>If its usefull reward points
</b>
Maybe you are looking for
-
Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and l
-
Monitor not detecting connection after installing TI4200 8X
Attempting install of GForce4 TI4200-VTD8X (MS-8894). Searched through the manual and says it can support 4x agp but when I put it in the computer the monitor cannot detect a connection to computer but behind the message saying so I can make out acti
-
Signature Verification won't "stick"
I have a document with some signature fields that I'm testing before putting into use in our office. When I sign one of the fields, Designer puts my signature in it and makes me save a copy of the document. BUT when I open this document, the signatur
-
This morning when I opened up my mail application all my mail that was received prior to today disappeared. I have mobileme and all the mail is still in my web mobileme mailbox. Why is it not displayed in my inbox on my computer? I just got my iMac a
-
Can i replace Nvidia 9400m on mbp 13' with 320 m ??????
can i replace Nvidia 9400m on mbp 13' with 320 m ??????