EIBCALEN not correctly informed in TMA-CRM environment

Hi,
We have found that the EIBCALEN field is not correctly informed in the program invoked from DFHMIRS when invoked from a tpcall from Tuxedo.
The IEBCALEN value is always higher than the length informed in both lengths (ilen and olen) of the tpcall with CARRAY type. In fact, ilen=olen, in our case.
What is wrong? why EIBCALEN is not equal to ilen=olen?
Our setup is this one:
Red Hat Linux x86_64
Application runs in a 'Tuxedo Version 12.1.1.0, 32-bit, Patch Level 015' that executes tpcall to Mainframe.32 bits is a constraint of the app
TMA runs in ' Tuxedo Version 11.1.1.2.0, 64-bit, Patch Level 094'. It is a domain specifically configured to allow the application to connect to the MainframeTuxedo 11.1 is a constraint in the Mainframe side
z/OSCRM ''CRM 11.1, May 3 2012 01:28 Build TMACRM"
Thanks in advance
Jose Luis Cutanda

Please try to set environment variable:
SNAX_ALIGN_COMMAREA_LENGTH=y
If yes,GWSNAX will set the common area length as the maximum of (INBUF,OUTBUF) COPYBOOK size for a outbound DPL call.
And, make sure your SNAGW patch level is RP20 or later, you can see it from ULOG, for example:
150317.bej301159!GWSNAX.13595.3461277584.0: LIBGWS_CAT:2201: INFO: Tuxedo Mainframe Adapter for SNA 11.1.0 Patch 024
Regards.

Similar Messages

Software Deployment - the status is not correct

Hello everyone,
My company is running SCCM to manage clients and deploy software. I found that almost computers got installed successfully but report and deployment status show not correct information. This is quite weird. Please take a look at screenshot.
Anybody has idea on it?
Le Nhut Minh PwC Vietname Limited.

Hi,
Please check software distribution logs to find some useful information.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog
If the status forward successfully, MP_Status.log also need to be examined.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

I'm trying to sync my iphone in IPhoto. I get this message "our MobileMe account information is not correct. The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there. Help please.

I'm trying to sync my iphone in IPhoto. I get this message "your MobileMe account information is not correct". "The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there. Help please.

Mobile me has been discontinued for over a year. What system and iPhoto versions are you running?
How are you trying to sync? With Photo Stream or thru iTunes?
Do you have an iCloud preference pane in your System preferences?
Do you meet the minimum requirements for iCloud and Photo Stream?
iCloud: System requirements
iCloud: Photo Stream FAQ
OT

Mail notifications for Eudora clients not displaying correct information in message subject

I have been using PMDF from Innosoft with Netscape Calendar Server 4.0. I
recently upgraded from Calendar Server 3.51 to 4.0, and I am using the
sendmail command to
send out email notifications. When I send out email notifications, clients
who use Eudora and who are on a Windows platform do not see the correct
information in the Subject line of the emails. This problem does not occur
with other email clients, including Eudora clients on Macintosh platforms.
This problem also does not occur when I send email using the natives endmail
binary.

The following line is an example of the Subject line that is displayed when
a Eudora client on Windows views an email notification: 
Subject: Wallace (xsw),Brian SmlhbiBT

Is there is a way to configure how Calendar Server writes the Subject lines
for email notifications?

Check the setting for the character set that is being used for the content
portion of email messages. This setting is in the Calendar Server
configuration file, which is located at 

/users/unison/misc/unison.ini

The mimecontentcharset
parameter under the [CWS]
section determines what character set is used to encode the content and subject
portion of a (MIME) email message. 

The accepted values for the mimecontentcharset
parameter are as follows: 

ISO-8859-1
Shift_JIS
MSCP932

The default value is ISO-8859-1
. 

For more information about the steps for configuring the Calendar Server,
please see the Netscape Calendar Server 4.0: Administrator's Guide at
 

http://docs.iplanet.com/docs/manuals/calendar/ncs40/ag/chapter7.htm#1019632

Try first disabling any custom rules you may have, and see whether that makes a difference. If the problem persists, proceed as follows.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

TS1368 On iBooks when I try to download my book it tells me my credit card information is not correct. I know it is

Says credit card not valid

The credit card is registered to exactly the same name and address (format and spacing etc) as you have on your iTunes account, and you are currently in that country ? If you are getting a message about the card being declined or the security code on it being invalid then you could also check with your card's issuer - from http://support.apple.com/kb/TS1646
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT1918 I bought a game which called ( Top Eleven ). Then i wanted to buy something from it but i couldn't, because as they said that my credit cards information is not correct...

I bought a game which called ( Top Eleven ). Then i wanted to buy something from it but i couldn't, because as they said that my credit cards information is not correct...

You may try to follow this article: http://support.apple.com/kb/TS1646

Try to publish ical - error "your .Mac account information is not correct"

I try to publish a calendar from my home computer so that I can see it on my work laptop (both Macs); and I get an error "Your .Mac account configuration is not correct. Calendar could not be published. Your .Mac account information is not correct. You cannot publish to .Mac until you have configured your .Mac account." Its setup and configured. Any ideas?

I had the same thing and did the following two things which got it to publish. Not sure which one fixed it but give it a go.
1. Open your .mac pane in system preferences. Sign out and sign back in.
2. Change the name of the calendar you're trying to publish.
Good luck!

TS1307 I am holidaying in Auckland using my daughters orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says orcon offline. I have spent half an hour with Orcon putting in correct

I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
Any advice appreciated.

On the Mail menubar > Mailbox, make sure Take all accounts online is selected.

MB56 does not display correct information

Hello,
All 3 plants, use transaction MB56 for traceability. This shows the components that used to manufacture the product and also where the product was shipped, depending on whether you select top/down or bottom/up. I have found an error in the transaction. When you execute for Bottom up to see where the product was shipped, the information is not correct.
The number of pcs is correct for the total amount shipped, but it does not display all of the deliveries that the product was shipped on. Please see the attachment for details of one example. I have executed this for 4 different materials and I have the same problem everytime.
Could you tell me what went wrong?
Thanks
JJ

Hi John,
MB56 will not display data because there is pre-requisite of it.
You must have to compile the inventory documents by MB57 first.
Only you need to execute MB57 t.code.
Specify from & to date & execute it. (It will take some minutes).
Then check it by MB56. You will find traceability.

IPod is not showing correct information

I recently updated both my iTunes and my iPod. Now I have iTunes 12.0.1 and I have iOS 8.1.2 When I sync my music, either manually or automatically, the information appearing on my iPod is wrong. If I sync an artist that has 5 albums with songs reaching into the 100's, the iPod will read that it has 1 album with 4 songs. I even watched iTunes go through and copy the songs onto it but it doesn't show properly.
Sometimes, I will uncheck and check the artists then sync, and the album covers are missing. It happens to some of my artists and I even went through the process of backing it up from an older backup and it still won't work. One album has three songs but when I search the iPod for the missing ones, they're there but aren't showing up in the album. It just bothers me when half of the cover images are gone and it doesn't say the correct information nor show all of my songs.

For artwork:
http://www.mcelhearn.com/deleting-the-itunes-album-artwork-cache-folder-may-reso lve-problems-with-album-art-displaying/
Also:
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Compliance on content status not correctly updated on CAS

We have a new SCCM 2012 R2 CU1 environment with a CAS and multiple primary sites.
We noticed that the compliance percentage
for some applications are not correctly (50%) updated on the CAS for a site with a primary site server with a DP role and a site system with a DP role. It is shown correctly (100%) on the primary site server.
On the CAS you can see the message "detail will be available when server finishes processing the messages" on the content status asset details for some applications.
We have verified that these applications are distributed. The compliance percentage is corrected if we go to an application on the CAS and redistribute it. It only takes a second to finish. So it looks like a bug on the CAS.
Since we are doing our proactive checks on the CAS, it is important for us that the information is shown correctly. We have rebooted the CAS with no result. Also we have all updates installed. We have not found a solution for this yet.
Is there anyone else with this issue? What can we do to troubleshoot or fix this issue?

Hi ,
As it is related to System Center 2012 Configuration Manager, you can create a new post on the configuration manager forum to ask for more information:
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
More experts will assist you, then you will get more information relation to your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

[PI 7.11 SP3] PI components not correctly registering themselves after AS restart

Hi Experts,
We have planned a system backup shutdown and restart every night for our PI environment.
In a random manner, some PI components as XI AF or Integration Directory are not correctly registered to SLD after that restart : for example, Integration Directory registers but it is not assigned to a PI domain.
It is good to mention that PI instance is actually using its own SLD (local SLD) for registration.
When the problem occurs, I follow sap note 1117249 to manually register PI components within SLD and this solves the issue.
But the definitive solution will be to avoid incomplete SLD registration at restart … But I have not yet found any sap note for that kind of solution.
Il someone can help J
Thanks a lot
Nadir

Hey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK

Need Help: Not able to invoke fusion crm webservice using SOAP UI

Hi,
I am trying to invoke fusion crm webservice by using SOAP UI, but I am getting Invalid seccurity tocken exception.
I have followed below steps specified in the oracle support document.
In Soap UI, Go to File>Preferences ,select the "HTTP Settings' tab on the lower left panel, then select the checkbox 'Authenticate Preemtively'.
2. From the wsdl extract the content from above wsdl between the tag/elements <dsig:X509Certificate> and </dsig:X509Certificate>
3. Create a file called certificate.cer ( in local Drive) with above encrypted data enclosed between -----BEGIN CERTIFICATE----- and -----END CERTIFICATE-----, file content shown below ( note: encrypted data
 for example
 -----BEGIN CERTIFICATE-----
MIICCzCCAXSgAwIBAgIETy
 -----END CERTIFICATE-----
4. Identifiy the java.home of SOAP UI , navigation (Help – System Properties) ,example ( it may be something like D:\SOAP UI download\soapui-4.5.1\jre)
5. Find the location of cacert file in SOAP UI ( example D:\SOAP UI download\soapui-4.5.1\jre\lib\security\cacert)
6. Use following keytool command to add the certificate file certificate.cer into keystore cacert , sample command given below for reference
 keytool -importcert -alias rcpt-key-alias -file "D:\certificate.cer" -keystore "D:\SOAP UI download\soapui-4.5.1\jre\lib\security\cacerts"
 at command prompt when prompted enter password as changeit
7. Restart SOAP UI and create a new project with https version of WSDL of organizationService
8. In SOAP UI , in Auth tab , provide the user name and password.
9. Invoke the Webservice
I have used following request XML in SOAP UI
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://xmlns.oracle.com/apps/sales/opptyMgmt/opportunities/opportunityService/types/" xmlns:opp="http://xmlns.oracle.com/apps/sales/opptyMgmt/opportunities/opportunityService/" xmlns:rev="http://xmlns.oracle.com/apps/sales/opptyMgmt/revenues/revenueService/" xmlns:not="http://xmlns.oracle.com/apps/crmCommon/notes/noteService" xmlns:not1="http://xmlns.oracle.com/apps/crmCommon/notes/flex/noteDff/" xmlns:rev1="http://xmlns.oracle.com/oracle/apps/sales/opptyMgmt/revenues/revenueService/" xmlns:act="http://xmlns.oracle.com/apps/crmCommon/activities/activitiesService/" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:soap="soap" xmlns:ns1="http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/">
 <soapenv:Header>
 <fmw-context xmlns="http://xmlns.oracle.com/fmw/context/1.0"/>
 <wsse:Security soap:mustUnderstand="1">
 <wsse:UsernameToken>
 <wsse:Username>userName</wsse:Username>
 <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Password</wsse:Password>
 </wsse:UsernameToken>
 </wsse:Security>
 </soapenv:Header>
 <soapenv:Body>
 <typ:createOpportunity>
 <typ:opportunity>
 <opp:BudgetedFlag>1</opp:BudgetedFlag>
 </typ:opportunity>
 </typ:createOpportunity>
 </soapenv:Body>
</soapenv:Envelope>
It would be great help if someone guide me on this...
Thanks & Regards
Samanta Mishra

For reference here is an example of a SOAP envelope I commonly use with SOAP UI to "query" employee data from HCM:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://xmlns.oracle.com/apps/hcm/employment/core/workerService/types/" xmlns:typ1="http://xmlns.oracle.com/adf/svc/types/">
 <soapenv:Header>
 <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
 <wsse:UsernameToken wsu:Id="UsernameToken-2" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
 <wsse:Username>username</wsse:Username>
 <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">password</wsse:Password>
 <wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">jwCzGGijT90Wml6eZe4cxg==</wsse:Nonce>
 <wsu:Created>2012-07-04T06:49:48.981Z</wsu:Created>
 </wsse:UsernameToken>
 </wsse:Security>
 </soapenv:Header>
 <soapenv:Body>
 <typ:findWorker>
 <typ:findCriteria>
 <typ1:fetchStart>0</typ1:fetchStart>
 <typ1:fetchSize>1</typ1:fetchSize>
 <typ1:filter>
 <typ1:conjunction>And</typ1:conjunction>
 <typ1:group>
 <typ1:conjunction>And</typ1:conjunction>
 <typ1:upperCaseCompare>false</typ1:upperCaseCompare>
 <typ1:item>
 <typ1:conjunction>And</typ1:conjunction>
 <typ1:upperCaseCompare>false</typ1:upperCaseCompare>
 <typ1:attribute>PersonNumber</typ1:attribute>
 <typ1:operator>=</typ1:operator>
 <typ1:value>123456</typ1:value>
 </typ1:item>
 </typ1:group>
 </typ1:filter>
 </typ:findCriteria>
 <typ:findControl>
 <typ1:retrieveAllTranslations>false</typ1:retrieveAllTranslations>
 </typ:findControl>
 </typ:findWorker>
 </soapenv:Body>
</soapenv:Envelope>
This example works fine for our Fusion Applications Cloud test instance, without any SSL setup or setting credentials on the request properties as the target service supports policy without message protection.
Based on the your steps your service has message protection policy, so the above will not work rather you need to do additional configuration. Please check the policy on your service to confirm how the call needs to be made. Here are few links and documents:
"How to invoke Fusion Application TCA webservice from SOAP UI (Doc ID 1496071.1)" documents how a service with message protection can be called from SOAP UI. Your steps seem identical so presumably they are based on this document.
"Oracle Fusion Sales Cloud Web Services (Doc ID 1354841.1)" contains information about the CRM web services including examples on the certificate import and sample payloads.
Please provide:
The security policies defined on the service (check the wsdl)
The exact error message the you get
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Hi i would like to know why when i put my serial number of lightroom, i have a message who say me this serial is not correct. I m sure i put the right serial

Hi when i put my serial number of Lightroom, i have a message which say it's not correct
i m sure i put the right number

Without posting private information in a public forum, are you sure you have a serial and not a redemption code?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504

EIBCALEN not correctly informed in TMA-CRM environment

Similar Messages

Maybe you are looking for