EIC Authentication-Error occurred while data was read from your ERP system

Hi everybody,
hope someone can help me with this issue in a EP 7.0 Portal (SP 08):
In ESS --> Personal Information --> EIC Authentication when I click on the service, I get the following message in roadmap step 1 (overview), :
"An error occurred while data was read from your ERP system. Contact your system administrator."
I appreciate your help! Thanks and best regards,
Jasmin

Hi,
Found similar threads.It ma help u.
/message/3652173#3652173 [original link is broken]
/message/3652594#3652594 [original link is broken]
Regards,
Manoj.

Similar Messages

  • Error occurred while data was being converted.

    hi all,
    i am gettting a run-time error (dump) in this line of code,
                netval = wa_tb_str_ekpo-ktmng  *  wa_tb_str_ekpo-netpr.
    ktmng is data type QUAN and has reference field MEINS of EKPO table
    while netpr is data type CURR and has reference field WAERS of EKKO table.
    ABAP ERROR ANALYSIS SAYS :
    Error occurred while data was being converted.
    Please help me.
    Thanks.

    hi prasad,
                 you  can pass this value to the char field. then pass it to the field. and let me know the result.
    regards,
    venkat.

  • Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

    ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
    MESSAGE, READS  a network error occured while attempting to read from the file  C:WINDOWS\installer\iTunes.msi

    All sorted now just needed to repair itunes from control panel

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

  • Trying to update to iTunes 10.4.1 and I get a message "A network error occured while attempting to read from the file C:|Windows|Installer|iTunes.msi"  Running WIndows 7 with all updates done.  I  have never had an issue with iTunes updating before.  Anyo

    iTunes has tried to update itself and runs into an error and tells me to manually install.  When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
    "A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
    Anyone know what is creating this error message?  Thanks for the help...

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to update iTunes but get this box message comes up, "Network error occurred while attempting to read from the file: c:/windows/installer/itunes.msi" I have be told to uninstall all iTunes then reinstall, if I do this will I lose my Library

    Looking on the net to solve this problem, it says
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    I have save all my iTunes on a CD.
    If I uninstall iTunes, will I lose my iTunes library and video and apps and inturn will I lose this off my phone..
    I have tryed to update my iPhone firmware as they said there is a new update firmware, it would not install this and put my phone into recovery mode and I had to use iPhone recovery fix to get it out of recovery mode, my iPhone did a back-up before it tried to update the firmware.
    Any idea's are welcome

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • An error occured while trying to read data

    Hi RoboHelpers,
    While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
    I then got this error when I tried to reopen the .XJP file:
    "An error occurred while trying to read data from
    <D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
    I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
    I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
    My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
    <?xml version="1.0" encoding="utf-8"?>
    <rhpml majorversion="2" minorversion="0">
        <folders/>
        <topics>
            <topic>
                <name>Tool_ID.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Description.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Hardware.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Hardware_Introduction.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>List_of_Available_Tools.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Tool_Type.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_trax_calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Probes.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Partial_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_File_Name.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>User_Defined_Calibration_Order_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Search_Override_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Optical.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Showing_an_Animated_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>print_list.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>example_printout.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Defining_Machines.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Deleting_the_LOADMACHINE_Command.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Ball.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>collision_tolerance.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Optical_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Setup.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>autocalibrate_probe.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Specifying_Collision_Tolerances.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Using_Existing_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_4_-_Begin_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_3_-_Define_Ports.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_8_-_Measuring_Port_2.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_7_-_Measuring_Port_3.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_FCR25_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_the_No_Machine_Item.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Deleting_the_Machine.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>defining_probe_changers.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Adding_Custom_Fixtures.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>add_tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>With_Averaging.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Shank_Optical_Vector_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Fast_Probe_Mode.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>X_Y_and_Z_Center.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Delete_Tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ScanRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>available_tip_types.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Thickness_of_the_ball_tip.htm</name>
                <name>PrbRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Edit.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Shank_Vector_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>edit_probe_components.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Edit_Tool.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <name>To_delete_a_wrist_angle.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Probe_Setup.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Measure.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Disk_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>PrbRdv.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Previewing_your_Probe_Configuration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_unit_calibration_data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>New_Angles_List_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>calibration_date_and_time.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Global_Used.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Individual_Angle_Data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>calibration_date_and_time.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Equally_Spaced_Angles_Data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Reset_Tips.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Disk_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>use_unit_calibration_data.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>dmis_label.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>add_angles.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Notes_on_the_Add_Angle_option.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Working_with_the_Angle_Grid.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>available_tip_types.htm</name>
                <name>calibration_date_and_time.htm</name>
                <name>Results.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Spherical_Tool_and_Ball_Tip.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Reset_Tips.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Diameter_Length.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Previewing_your_Probe_Configuration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>User_Defined_Calibration_Order_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Wrist_Map_If_Available_check_box.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Diameter_Length.htm</name>
                <name>Use_Wrist_Map_If_Available_check_box.htm</name>
                <name>Probe_Description.htm</name>
                <name>List_of_Available_Tools.htm</name>
                <name>Probe_File_Name.htm</name>
                <name>use_trax_calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_2_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Use_Partial_Calibration.htm</name>
                <name>Probe_Description.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>autocalibrate_probe.htm</name>
                <name>Search_Override_I_J_K.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Disk.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_ACR1_Probe_Changer.htm</name>
                <name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>example_printout.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>defining_probe_changers.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Calibrating_the_CW43_Probe_Changer.htm</name>
                <name>Optical.htm</name>
                <name>example_printout.htm</name>
                <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
                <name>defining_probe_changers.htm</name>
                <name>Inserting_Quick_Fixtures.htm</name>
                <name>Shank.htm</name>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
                <name>Step_5_-_Prepare_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
                <name>Probe_Setup.htm</name>
                <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <name>Step_9_-_Review_Calibration_Results.htm</name>
                <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
                <name>Step_6_-_Measuring_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
                <name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Selecting_the_No_Machine_Item.htm</name>
                <name>Deleting_the_Machine.htm</name>
                <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
                <name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Showing_an_Animated_Probe_Changer.htm</name>
                <name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
                <name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_4_-_Define_Ports.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_6_-_Measure_Port_1.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_7_-_Measure_Port_8.htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
                <comments></comments>
                <frameset>0</frameset>
            </topic>
            <topic>
                <name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
                <name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
                <name>ACR1_Step_10_Review_Calibration_Results.htm</name>
        </topics>
    </rhpml>
    Thanks,
    Jared

    Hi Jared.
    I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
    <topic>
        <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    <topic>
        <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    <topic>
        <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
        <comments></comments>
        <frameset>0</frameset>
    </topic>
    There are others.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • Error occured while service was processing- seeing this error often

    I have Oracle EBS 12.1 installed and have a LDAP directory on the other side. data to directory is sent using soap protocol. Often while doing some operation like add user i get the following error
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <env:Header/>
    <env:Body>
    <env:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    <faultcode xmlns="">SOAP-ENV:Server</faultcode>
    <faultstring xmlns="">Error occured while service was processing.</faultstring>
    </env:Fault>
    </env:Body>
    </env:Envelope>
    </output>
    restarting the ebs services solves the problem. What is causing this?

    According to the XSD of the service, p_validate is an integer:
    <element name="P_VALIDATE" type="int" db:index="1" db:type="INTEGER" minOccurs="0" nillable="true" />

  • Error occured while service was processing while invoking Emp WS

    Getting error <faultstring>Error occured while service was processing.</faultstring> while invoking the Employee pl/sql webservice. Below is the payload I am sending to the webservice that is deployed in R12.1 instance using iRep. Please help.
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:hr="http://xmlns.oracle.com/apps/per/soaprovider/plsql/hr_employee_api/" xmlns:cre="http://xmlns.oracle.com/apps/per/soaprovider/plsql/hr_employee_api/create_employee/">
    <soapenv:Header>
    <hr:SOAHeader>
    <hr:Responsibility>SYSTEM_ADMINISTRATOR</hr:Responsibility>
    <hr:RespApplication>SYSADMIN</hr:RespApplication>
    <hr:SecurityGroup>Standard</hr:SecurityGroup>
    <hr:NLSLanguage>AMERICAN</hr:NLSLanguage>
    <hr:Org_Id>204</hr:Org_Id>
    </hr:SOAHeader>
    <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <wsse:UsernameToken wsu:Id="UsernameToken-Vm6jzMWeZx220sdBFHZ93A22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <wsse:Username>SYSADMIN</wsse:Username>
    <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">x</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    </soapenv:Header>
    <soapenv:Body>
    <cre:InputParameters>
    <cre:P_VALIDATE>false</cre:P_VALIDATE>
    <cre:P_HIRE_DATE>17-JUN-07</cre:P_HIRE_DATE>
    <cre:P_BUSINESS_GROUP_ID>202</cre:P_BUSINESS_GROUP_ID>
    <cre:P_LAST_NAME>Employee</cre:P_LAST_NAME>
    <cre:P_SEX>M</cre:P_SEX>
    <cre:P_PERSON_TYPE_ID>13</cre:P_PERSON_TYPE_ID>
    <cre:P_PER_COMMENTS>Test</cre:P_PER_COMMENTS>
    <cre:P_DATE_EMPLOYEE_DATA_VERIFIED></cre:P_DATE_EMPLOYEE_DATA_VERIFIED>
    <cre:P_DATE_OF_BIRTH>01-JAN-1981</cre:P_DATE_OF_BIRTH>
    <cre:P_EMAIL_ADDRESS>[email protected]</cre:P_EMAIL_ADDRESS>
    <cre:P_EMPLOYEE_NUMBER>123421</cre:P_EMPLOYEE_NUMBER>
    <cre:P_EXPENSE_CHECK_SEND_TO_ADDRES></cre:P_EXPENSE_CHECK_SEND_TO_ADDRES>
    <cre:P_FIRST_NAME>ORACLE FORUM 3</cre:P_FIRST_NAME>
    <cre:P_KNOWN_AS>Raj</cre:P_KNOWN_AS>
    </cre:InputParameters>
    </soapenv:Body>
    </soapenv:Envelope>

    According to the XSD of the service, p_validate is an integer:
    <element name="P_VALIDATE" type="int" db:index="1" db:type="INTEGER" minOccurs="0" nillable="true" />

  • Content Library Explorer error -error occurred while trying to read the package metadata (can't find package in console)

    I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
    the following error: An error occurred while trying to read the package metadata. The package
    PackageID is invalid and must be redistributed from the Configuration Manger console.
    Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
    The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
    I'm not very familiar with 2012, so not sure what I've done.
    Any help or advice appreciated.
    Thanks
    Jane

    Hi Torsten,
    thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
    this mean it is supported?)
    however, on those 2 DP's in that class, the suspect package ID is not listed!???
    Any more ideas?
    Many thanks
    Jane

  • Error 1316.A network error occurred while attempting to read the file .msi

    Hi to all,
    this is my first post on OTN forum! anyway...
    My attempt to install Essbase-ExcelAddin-11121 Fail. During the execution of Spreadsheet Add-in the process generate this issue:
    Error 1316.A network error occurred while attempting to read the file ...AppData\Local\Temp\_is711B\Setup.msi
    i've seen also seen that in the directory AppData\Local\Temp\_is711B\ there is no file called Setup.msi but AppData\Local\Temp\_is711B\Setup.INI
    i have to modify the installer?how? anybody resolve this problem?
    I checked on google but, at this moment, no results.
    thanks for all support
    Gaetano

    Hello Gaetano,
    It sounds like you are using Windows 7 and/or Vista.
    When running the installation try to right click on the executable and select "Run as Administrator".
    Regards,
    John A. Booth
    http://www.metavero.com

  • Can't download itune 10.5. it says window installer error occurs while i was installing . what should i do???

    can't download itune 10.5.
    it says window installer error occurs while i was installing it.
    what should i do?? i tried everything. i just can't download it.

    I have the same problem, PC with windows 7 and 64 bit.  Don't know how to fix yet

  • How do I troubleshoot "A non-SQL error occurred while requesting a connection from DSN ." errors?

    Hello,
    Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
    We have 2 load balanced app servers:
    Windows Server 2008 R2 (virtualized)
    ColdFusion 8, Enterprise
    And a database server:
    Windows Server 2008 R2
    SQL 2012
    The error in “coldfusion-out.log” is:
    A non-SQL error occurred while requesting a connection from <DSN>.
    Timed out trying to establish connection
    This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
    The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
    I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
    Thanks for your help!

    I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

  • Compile for Debug Results in "Error: No more data to read from socket"

    I am testing the debugger in SQL Developer, and although I can compile objects normally (using the menu/tool bar options), when I compile a procedure for debug, I get this message:
    Error: No more data to read from socket
    There is no sql error message, just this statement.
    I am using 1.5.1.54.40 on an XP SP2 machine. The database is hosted remotely.
    Any advice is appreciated.
    Thanks, Wolf Moritz

    Weird, I was going to say that these are network or port issues, but then a quick look around popped this up. It may be related. SQL error 17410 No more data to read from socket

Maybe you are looking for

  • How long are emails stored in iCloud

    How long are e-mails stored on iCloud servers after they have been read? Is there a way to ensure they are kept indefinitely? Most mail seems to disappear after a month or so.

  • Itunes could not connect. unknown error -54

    The itunes store is not working for me. Also, the App store has the same problem and i have trouble doing updates.

  • NAT and secondary IP

    We got a new block of 10 ip addresses from our ISP. The five we had were not enough. We are no longer using the original five. I binded the new IP address to the public interface and put in the public to private addresses in the NAT table but it won'

  • How can i turn off siri because it is blocking its normal operation?

    How can I turn off siri? my iphone 4s was still functioning perfectly but but when siri was accidentally turned on I can no longer access it.How can I solve this problem?

  • Macbook a1181 2.16 intel shuts down 1 min at idle.

    The macbook works fine when using never shuts down.then at idle 1 minute or so shuts down and then restarts no problems and work until at idle again.I installed window 7 on bootcamp and it never shuts down and runs great.switch back to os x 10.6.7 an