EIC web client

Hi
i have installed SAP ECC 6.0 and wants to use EIC web client. can any one tell how to enable or use EIC web client?
when i am using Transaction code HREIC then system shows another window where after login through SAP login system gives time out message.
kindly help
regards
Mohit

There is a bunch of configuration that is required which you can access using the IMG. It is to much to detail in this forum but should be pretty straightforward if you go through the IMG.
I would also check out www.eicexperts.com as they have participated in several implementation and have some valuable information on their website.

Similar Messages

EIC Web Client Timeout value

Hello, I am trying to help our EIC users with a request. They say that the web client times out and closes on them after about 5 minutes of inactivity. They would like to increase the timeout value. Unfortunately the person who implemented this is no longer here and I am not finding a place to configure the timeout. Is this value configurable, and if so where? Thanks very much!

Hi Jim
There is no time out configuration values within EIC as it follows the overall SAP environment time out which is typically controlled by the basis team. If you are finding that EIC is timing out at a different schedule than production SAP they may be something custom that was built for your company that you will want to review.
Hope this helps.
Jarret

Not able to access the Oracle I/PM web client.

I have started the Administration server and the Oracle I/PM Managed Server. Now I'm trying to access the Oracle I/PM web client at this URL: http://hostname:16000/imaging. But when I hit this URL, the following error comes up:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I'm also posting a part of the logs from the IPM_server log file:
####<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <01hw311161> <IPM_server1> <main> <<WLS Kernel>> <> <> <1369026172860> <BEA-000360> <Server started in RUNNING mode>
####<May 20, 2013 10:32:53 AM IST> <Info> <J2EE> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1369026173516> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173641> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173750> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173766> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:33:51 AM IST> <Info> <Health> <01hw311161> <IPM_server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1369026231604> <BEA-310002> <85% of the total memory in the server is free>
What configuration am I missing?
Thanks in advance
Pradeep

Hi Srinath,
I have checked that as well, it is showing the IPM_server in running mode.
Also it doesn't show any deployment failure in the command line. Here is what it shows:
<May 20, 2013 10:32:51 AM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
ebLogic Managed Server "IPM_server1" for domain "base_domain123" running in Deve
lopment Mode>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
I feel there is some issue as this log is suggesting:
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
But I don't know how to resolve it.
Thanks
Pradeep

Long time to start Java Web Client (Analyzer 6.2.1)??

Does anyone know why Analyzer(6.2.1) takes a long time to start Java Web Client. Sometime it's even take more than 5 minutes. I think it is the Java Plug-in starting on the client computer. Any solution?

The key to Analyzer 6.2.1 running correctly is the version of Sun Java Plugin. The ideal version (most optimal) is 1.3.0_02.Secondary to this if Analyzer performs OK once you are logged in then it could be down to the speed of your connection. The applet compiles at runtime (unlike Analyzer 5 which was a one time download). The delay in getting to the login screen could be this download.Hope this helps.Paul ArmitageAnalitica Ltd.www.analitica.co.uk

How to develop web app by ADF Faces rich web client ?

i want developer web app by adf face rich
but have not adf rich tag library in jdev 10.1.3
how to develop by adf rich?

Hi,
don't know what you mean by ADF Faces rich web client, but if you mean our Ajax component set, then this is not yet available outside of Oracle. If you mean ADF Faces as we have it in JDeveloper 10.1.3, create a JSF page and step through the creation process, toggle the ADF Faces libraries to make ADF Faces available
Frank

Spaces disappear from folder name when opened thrugh Web Client

Hi,
I am opening a pdf or word document through method EXECUTE of class CL_GUI_FRONTEND_SERVICES.
Now if there are more than one space in the path (ex. D:tes t.pdf ) then file gets opened sucessfully if I log in through WIN client in SAP.
But if i log in through SAP WEB client ,then only one space is retained in the URL and rest of the spaces are removed by method and I get a message "Path D:\tes t.pdf" not found.
Any suggestions welcome?
Regards,
Mukul Sharma.

Delete localstore.rdf or rename the file to localstore.rdf.sav in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] to test if the file is corrupted.
See http://kb.mozillazine.org/Corrupt_localstore.rdf
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)
Note:
Deleting the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] will reset the customizations of the toolbars to the defaults.
You can rename "localstore.rdf" to "localstore.rdf.sav" to test if that solves it.
Then you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if it didn't work.

A Web application + API for non web clients

Hi there,
I am new to the java enterprise world, i have a query regarding the application i am developing currently, I am not sure this is the exact category to ask this question but please help me on this.
In very simple terms my applications job is to give a listing or view of files distributed across network.
For this I need to have a webApp which can provide a view to all web clients. (where view is nothing but listing of files independent of there location)
Because this view tells nothing more than files , and i am as data center administrator cannot tell much about data, so we need to provide APIs so other applications (WebAPP or anything else)
can present the view in more data specific terms.
The webapp part is fine with me, but how do i support API being on an application server like glassfish.
Please help me on this.
Thanks in advance
AP

Dear all,
Anyone can help me to clear this problem ?

Web client and desktop client not available for Interactive reporting 11.1.2.2

Hi team,
Currnetly we are usning EPM 11.1.2.2 , we are trying to install and configure
Interactive reporting in Linux 64 bit system.
we are few questions jotted below:
Interactive reporting studio client & Interactive reporting Dashboard Development Studio client are disabled.
post installation we are not able to see IR Client folder in <EPM HOME> location.
while launching workspace we are not able to see the WEB Client Interactive reporting under TOOLS-->INSTALL.
we read in a blog, which states it Interactive reporting needs a license. whether it needs any special License for using it?
we downloaded the Entire Dump of EPMS 11.1.2.2 from Oracle Edelivery website.
Kindly let us know we are missing any where?
we are strucked at this point.
Regards
Chinu

If you want the 11.1.2.0 assemblies you will need to contact Oracle as they have been removed from edelivery.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to use the OCWST or Web Client to connect to the calendar Server

While trying to log into the calendar using the web client i am getting the error :
An error occurred during processinig
Information: Cannot retrieve node information
While connecting using the OCWST i am getting the error; I am using WSAD to do the coding. and i have coppied the soap.jar given by apache.
at org.apache.soap.rpc.Call.getEnvelopeString(Call.java:208)
     at org.apache.soap.messaging.Message.receiveEnvelope(Message.java:144)
     at oracle.calendar.soap.client.Calendarlet._$4978(Calendarlet.java:277)
     at oracle.calendar.soap.client.Calendarlet.Search(Calendarlet.java:149)
     at com.altexia.ocal.test.OCalPimTest.main(OCalPimTest.java:76)
Please help!!!!!!!
Joyce

The full error message while calling
CalendaringResponse response = cws.Search(search.getElement());
is>>>>>>>>>>
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html; charset=iso-8859-1", must be: "text/xml". Response was:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>500 Internal Server Error</TITLE>
</HEAD><BODY>
<H1>Internal Server Error</H1>
The server encountered an internal error or
misconfiguration and was unable to complete
your request.<P>
Please contact the server administrator,
[email protected] and inform them of the time the error occurred,
and anything you might have done that may have
caused the error.<P>
More information about this error may be available
in the server error log.<P>
<HR>
<ADDRESS>Oracle HTTP Server/1.3.22 Server at 192.168.10.128 Port 7777</ADDRESS>
</BODY></HTML>
     at org.apache.soap.rpc.Call.getEnvelopeString(Call.java:208)
     at org.apache.soap.messaging.Message.receiveEnvelope(Message.java:144)
     at oracle.calendar.soap.client.Calendarlet._$4978(Calendarlet.java:277)
     at oracle.calendar.soap.client.Calendarlet.Search(Calendarlet.java:149)
     at com.altexia.ocal.test.OCalPimTest.main(OCalPimTest.java:76)

Drill Through in Analyzer 5.0.3 Web Client

I have an EIS created Essbase cube with drill through reports. I can access the reports using the Excel add-in and via the Analyzer Windows client and they work as expected. In the Analyzer Web client, I see the LRO indicator, but when I click on the cell I get "Cell ___ cannot be drilled on". Does the Web client support drill through, and is there additional configuration necessary to make it work?Thanks,Jim Burnham

I didn't have the Essbase setting of "Use Grid API" turned on for the user I was testing with.Jim

Capture SY-UCOMM from IC Web Client in SAP R/3

Hi Experts,
I have a requirement in which i am Changing Requested Delivery Date in CRM IC Web Client, when i save the Sales Order in CRM IC Web Client , Based on date the Corresponding Field in VBAK-KVGR2 has to be Updated.
When the Order is created through IC Web Client , the User Exit USEREXIT_CHECK_VBAK is triggered and i have put a condition SY-TCODE is initial and T180-TRTYP = 'V' and then Checking SY-UCOMM = SICH currently the SY-UCOMM is getting cleared and because of this i am not able to change the VBAK-KVGR2 field.
Is there any other way to capture the SAVE button Command from IC Web Client in USEREXIT_CHECK_VBAK .

look at blog
/people/raja.g/blog/2007/01/24/displaying-r3-transaction-in-icwc-application

Error while creating Business Agreement from IC web Client

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & sucessfully replicate the same to ISU as a COntract Account.
But when I Try to create the Business Agreement from ICWebClient I am gwtting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Hi,
Try maintaining an entry with blank risk class.
Regards
Prasenjit

Error While Creating Business Agreement via IC Web CLient

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & successfully replicate the same
to ISU as a Contract Account.
But when I Try to create the Business Agreement from ICWebClient I am
getting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Problem solved mainatain Risk Class as " "

Error while creating return order(Complaint) in IC web client

Hi SAP Experts,
I am getting following Error while creating return order(Complaint) in IC web client.
Error when processing your request
What has happened?
The URL http://sapcrd.comfort.com:8000/sap/bc/bsp/sap/crm_ic/default_delta.do was not called due to an error.
Note
The following error text was processed in the system CRD : Exception condition "NON_EXISTING_HANDLE" raised.
The error occurred on the application server sapcrd_CRD_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: PRC_PD_HEAD_ADD_COND of program SAPLPRC_PRICING_API
Function: CRM_PRIDOC_UPDATE_EC of program SAPLCRM_PRIDOC_COM_EC
Form: EXECUTE_CALLBACKS_PLANNED of program SAPLCRM_EVENT_OW
Function: CRM_EVENT_SET_EXETIME_OW of program SAPLCRM_EVENT_OW
Function: CRM_ORDER_COMPLETE_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_MULTI_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN of program SAPLCRM_ORDER_API
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
Method: IF_EX_ORDER_SAVE~PREPARE of program CL_EX_ORDER_SAVE==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcrd_CRD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server sapcrd_CRD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 330 -u: VORUSX -l: E -s: CRD -i: sapcrd_CRD_00 -w: 2 -d: 20080324 -t: 021723 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Maximum points will be awarded for useful information.
Thanks,
Rony

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

Invoking a SyncAsync Process from a Web Client

I implemented a SyncAsync pattern as documented on the BEA website which allowed me to invoke an async process from a stateless process.
This works as a syncasync wsdl gets generated and is used by the stateless invoker process to form a web service control to invoke the async process.
What i would like to do now is call the async process via its syncasync wsdl from a web client. Does anyone know how to create a web service client from the syncasync wsdl which I can use from a web client ?

Hello,
Here is the code I use:
Properties props = new Properties();
Locator locator = null;
props.put("orabpel.platform", "ias_10g" );
props.put("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory" );
props.put("java.naming.provider.url","opmn:ormi://host:port/orabpel" );
props.put("java.naming.security.principal", "adminuser" );
props.put("java.naming.security.credentials", "mdp" );
String securityCredentials = "adminuser";
String selectedDomain = "default";
locator = new Locator(selectedDomain,securityCredentials,props);
IBPELProcessHandle procs[] = locator.listProcesses();
The error is:
Exception in thread "main" java.rmi.UnmarshalException: Error deserializing return-value: java.io.InvalidClassException: com.oracle.bpel.client.BPELProcessHandle; local class incompatible: stream classdesc serialVersionUID = 5429682712928177644, local class serialVersionUID = 8176841433835717563
at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:82)
at com.oracle.bpel.client.Locator.listProcesses(Locator.java:309)
Thanks for help.
Edited by: 857737 on 14 sept. 2012 10:00

EIC web client

Similar Messages

Maybe you are looking for