EIM / WIM 4.3.2 Agent Bulk Import UCCE

When one runs the integration wizard all the agents in UCCE are also imported. The thing is that we can only run the wizard once. So every time I add agents to UCCE and want them to use EIM / WIM  I have to manually map them. It there a way to do this in bulk  or does this have to be manually done? Its ok to do this manually for few agents but the problem is when there are many agents.
Victor

Hi
I dont believe there is any standard way of doing this other than mapping the agents manually.
When doing an install though it is best to create a Non-Production/Test deparment first. You can run the integration wizard against this department and bring in a couple of test agents. Once happy you can then create more departments and then run the integration wizard again against the new departments. Remember you cannot delete a department once you have created it.
Thanks,
Matt

Similar Messages

  • Installing EIM/WIM 4.3(2) with UCCE 7.5

    I am looking to install EIM/WIM for a customer with an exisiting UCCE 7.5 installation. Would really like to installed EIM/WIM 4.3(2) as it has support for IE 8. But...
    According to Cisco Unified Contact Center Enterprise (Unified CCE) Software Compatibility Guide only version 4.3(1) is compatible with UCCE 7.5.
    It seems that UCCE 8.0 is the only version that is compatible with 4.3(2).
    Has anyone tried EIM/WIM 4.3(2) with UCCE 7.5?
    Thanks,
    Richard

    However given time and cost constraints for the project, unfortunately we might have to go with 4.3(1) and consider a upgrade later.
    In that case, you can apply ES4 (going from memory, so I hope this is the right ES) to 4.3(1) as this supports agents using IE8. That was its main purpose because there was a little delay in bringing out SR2 and customers wanted the IE8 support. That said, SR2 has a host of bug fixes. SR2 will complain if someone on IE6 tries to use the Agent Desktop, while ES4 will not,
    Regards,
    Geoff

  • EIM/WIM: How to install MeadCo Security Manager?

    Hi,
    While logging into an EIM/WIM agent console an agent does not get the following message:
    This site might require the following ActiveX control: 'MeadCo's Security Manager from ... Click here to install...'
    As a result we cannot use the two-way cobrowsing feature of EIM/WIM.
    Please note we set cobrowsing attributes in the department and partition settings accordingly to allow that feature and in IE7 as well.
    What is wrong? How do we launch cobrowsing?
    Thanks.
    Igor

    [email protected] eGain, true cobrowsing is done with another product that you install. This was available with 4.2.x and could be used with 4.3 early release, but CoBrowse is not included in the 4.3 product set from Cisco. CoBrowse is a difficult problem because of dynamic content management and all the rules and security settings required, and by understanding is that Cisco did not think it was ready. My understanding is that it will be added later, along with pro-active chat etc.Just to make sure we are talking about the same thing .... what is it you wish to do? Follow me browsing driven by the customer?Regards,Geoff
    Hi Geoff,
    Thanks for your help.
    Yes, we do want to use cobrowsing driven by an agent or a customer, i.e. the "follow me" feature.
    So, if I understood you correctly we have to wait until Cisco implements this feature.
    Thanks.
    Igor

  • EIM/WIM: Displaying open hours

    Hi,
    We have just installed EIM/WIM and try to check a situation where there are no agents available to respond to cusomer's request for a chat. When a customer clicks on the Chat button in a Web browser he/she gets the following message:
    Thank you for your inquiry. Our service hours are 9am-5pm PST, Monday-Friday. If you are trying within the service hours and still getting this message, please try after some time, as all our agents might be busy or unavailable at this time.
    Then we have created a calendar with open hours from 01:00 AM to 11:00 PM, but again customers get the same message, i.e. the part of this message indicating open hours does not correspond the open hours in the calendar. We have restarted the EIM/WIM server but again no luck.
    What's the cause of it? How can we workaround this problem?
    Thanks.
    Igor

    Igor,
    This is a static message (not a macro based message) that why it keeps showing the same message
    This can be changed in the Chat Template (Department > Your Department > Chat > Templates) in the Options->Off Hours tab. Kindly refer to the EIM/WIM Administration Console User Guide (page 177 - 181). I think it should be the same for both v4.2(x) and v4.3(1).
    Thanks!
    -JT-

  • I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description fie

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

  • Error in QP: Bulk Import of Price List

    Hi All,
    I am trying to import price list records using the concurrent program 'QP: Bulk Import of Price List'. I am facing one issue in this...below is the error detail:
    7164262/PRL/QP_INTERFACE_LIST_LINES//RAGH-L-3 A price break child line must have at least one pricing attribute.
    The header and Qualifier records are getting imported sucessfully, the issue is with the line and it's attributes. Below are the fields on interface tables whcih i m populating:
    INSERT INTO QP_INTERFACE_LIST_LINES (
    ORIG_SYS_LINE_REF,
    ORIG_SYS_HEADER_REF,
    LIST_LINE_TYPE_CODE,
    START_DATE_ACTIVE,
    END_DATE_ACTIVE,
    ARITHMETIC_OPERATOR,
    OPERAND,
    PRIMARY_UOM_FLAG,
    PRODUCT_PRECEDENCE,
    INTERFACE_ACTION_CODE,
    PROCESS_FLAG,
    PROCESS_STATUS_FLAG,
    PRICE_BY_FORMULA,
    AUTOMATIC_FLAG,
    REPRICE_FLAG
    --PRICING_GROUP_SEQUENCE
    ) VALUES
    'RAGH-L-3',
    'RAGH-H-3',
    'PLL',
    sysdate,
    NULL,
    'UNIT_PRICE',
    150,
    'Y',
    230,
    'INSERT',
    'Y',
    'P',
    NULL,
    'Y',
    'Y'
    --0
    INSERT INTO qp_interface_pricing_attribs
    orig_sys_pricing_attr_ref,
    orig_sys_line_ref,
    orig_sys_header_ref,
    PRODUCT_ATTRIBUTE_CONTEXT,
    product_attr_code,
    product_attr_val_disp,
    product_uom_code,
    interface_action_code,
    process_flag,
    process_status_flag,
    PRICING_ATTRIBUTE_CONTEXT,
    PRICING_ATTRIBUTE,
    PRICING_ATTR_VALUE_FROM_DISP,
    COMPARISON_OPERATOR_CODE,
    PRICING_ATTR_VALUE_TO_DISP )
    VALUES
    'RAGH-ATTR-3',
    'RAGH-L-3',
    'RAGH-H-3',
    'ITEM',
    'INVENTORY_ITEM_ID',
    'CM13139',
    'EA',
    'INSERT',
    'Y',
    'P',
    'ADS_PRICING',
    'COST',
    '25',
    'BETWEEN',
    '30' );
    Using the above process I am getting the error as mentioned:"7164262/PRL/QP_INTERFACE_LIST_LINES//RAGH-L-3 A price break child line must have at least one pricing attribute.".
    If I am not using the pricing attributes PRICING_ATTRIBUTE_CONTEXT,PRICING_ATTR_CODE, Pricing_attr_value_from,COMPARISON_OPERATOR_CODE, PRICING_ATTR_VALUE_TO I am able to import the line records also.
    The script provided by Oracle also uses the same columns in the interface table, kindly help me if any one have any idea regarding this issue.

    Hi Luko,
    I tried the same script given by oracle, but it is giving me the error as I mentioned earlier. When I am not using the pricing line attributes, it is working fine. The error is coming only when I am passing the pricing attribute parameter(PRICING_ATTRIBUTE_CONTEXT,     PRICING_ATTR_CODE,     PRICING_ATTR_VALUE_FROM_DISP,
    COMPARISON_OPERATOR_CODE,     PRICING_ATTR_VALUE_TO_DISP).
    I am passing the values as shown below:
    PRICING_ATTRIBUTE_CONTEXT-Code fro pricing context i.e PRICING ATTRIBUTE
    PRICING_ATTR_CODE-code for attribute i.e. FREIGHT_COST
    PRICING_ATTR_VALUE_FROM_DISP-200
    PRICING_ATTR_VALUE_TO_DISP-300
    COMPARISON_OPERATOR_CODE-BETWEEN
    Thanks!

  • How to use QPXVBLK: QP: Bulk Import of Price List?

    hi,
    i'm trying to create a script for import price lists. i've read that this concurrent program "QPXVBLK: QP: Bulk Import of Price List" is what i need. i've been able to successfully create the script to populate the interface tables:
    QP_INTERFACE_LIST_HEADERS
    QP_INTERFACE_LIST_LINES
    QO_INTERFACE_PRICING_ATTRIBS
    but i'm getting an error.
    3436374/PRL/QP_INTERFACE_LIST_HEADERS/24934 Cannot perform Insert, as record with orig_sys_header_ref 24934 already exists for the list_source_code .
    i figured it has something to do with the ORIG_SYS_HEADER_REF, ORIG_SYS_LINE_REF and ORIG_SYS_PRICING_ATTR_REF columns.
    below are values i'm currently passing.
    QP_INTERFACE_LIST_HEADERS TABLE
    - ORIG_SYSTEM_HEADER_REF = LIST_HEADER_ID
    QP_INTERFACE_LIST_LINES TABLE
    - ORIG_SYS_LINE_REF = LIST_LINE_ID
    - ORIG_SYS_HEADER_REF = LIST_HEADER_ID of parent record in QP_INTERFACE_LIST_HEADERS TABLE
    QP_INTERFACE_PRICING_ATTRIBS TABLE
    - ORIG_PRICING_ATTR_REF = PRICING_ATTRIBUTE_ID
    - ORIG_SYS_LINE_REF = LIST_LINE_ID of parent record in QP_INTERFACE_LIST_LINES TABLE
    - ORIG_SYS_HEADER_REF = LIST_HEADER_ID of parent record in QP_INTERFACE_LIST_HEADERS TABLE
    if these are not correct, what values should be passed on this columns?
    thanks
    allen

    hi all,
    ii would like to add a follow up question on this.
    what fields are required when inserting records into the interface tables for the QP: Bulk Import of Price List?
    i've been running some tests and while some price lists are imported with no issues, some are not and some only partial. i'm not receiving any errors on the import which makes this harder for me to debug.
    any thoughts?
    thanks.
    allen

  • Bulk import error - Missing required attribute ‘fullname’

    Folks,
    I am having trouble trying to bulk import some users.
    I have the following file for import (cut down from what I really want to import):
    command,user,waveset.resources,password.password,password.confirmpassword,global.firstname,global.lastname,global.fullname
    Create,”user1”,”myLDAPresourcename”,”passwd”,”passwd”,”myfirstname1”,”mysurname1”,” myfirstname1 mysurname1”This works using “Accounts->Launch Bulk Actions” with Action set to “From Action List” and everything else on that page left at the default value. The correct data appears in IDM and the LDAP resource.
    Now if I try to import the following file, in which the user does not have a first name, I get in to trouble:
    command,user,waveset.resources,password.password,password.confirmpassword,global.firstname,global.lastname,global.fullname
    Create,”user2”,”myldapresourcename”,”passwd”,”passwd”,””,”mysurname2”,”mysurname2”
    The error message is:
    com.waveset.Util.WaveSetException: An error occurred adding user ‘uid=user2,…..’ to resource “myLDAPresourcename”.
    com.waveset.util.WavesetException:  Missing required attribute ‘fullname’Clearly the import file contains a column for ‘fullname’ (column 8) and a value for ‘fullname’ in the only row of data “mysurname2”. As far as I am concerned it is perfectly valid for a user not to have a ‘firstname’; but they must have a ‘fullname’.
    I have tried using an import file without a value for ‘fullname’, but with a ‘firstname’ and ‘lastname’ like this
    command,user,waveset.resources,password.password,password.confirmpassword,global.firstname,global.lastname,global.fullname
    Create,”user3”,”myLDAPresourcename”,”passwd”,”passwd”,”myfirstname3”,”mysurname3”,””This works. The correct data appears in IDM and the LDAP resource and IDM has generated a ‘fullname’ value of “{Firstname} {Surname}”. Trying to leave out the ‘firstname’ and the ‘fullname’ gives the same error as above.
    The configuration of my resource (in summary) is
    objectclasses:
         top
         person
         inetOrgPerson
    Account Attributes:
         accounted     -> uid               [required]
         password     -> userPassword
         firstname     -> givenname
         lastname     -> sn               [required]
         objectClass     -> objectClass
         fullname     -> cn               [required]
    As an experiment I have tried reconfiguring the resource so that ‘fullname’ is not marked as required.
    Importing user1 and user3 still works and still creates the correct data in IDM and the LDAP resource.
    Importing user2 now gives a different error:
    com.waveset.Util.WaveSetException: An error occurred adding user ‘uid=user2,…..’ to resource “myLDAPresourcename”.
    javax.naming.directory.SchemaViolationException: [LDAP: error code 65 – Object Class Violation]I don’t understand why, during the import of a user without a ‘firstname’ IDM will not generate a ‘fullname’ or use the supplied ‘fullname’.
    Can anyone help?
    Regards,
    Gavin

    After further testing it turned out that I couldn't create a user without a firstname from the IDM GUI and this in turn was because of the way fullname was generated by the user form.
    I've got the user form changed and now user creation (from the GUI and via bulk import) is working as hoped.

  • Is there a way to bulk import/edit SMTP Proxy Adresses in Unity Connection 10?

    I'm looking for a way to perform a bulk import of SMTP Proxy Addresses. BAT doesn't seem to have a way to do it.  I have 3,000 users, not looking forward to doing it manually!  Any suggestions?
    Thanks

    Is there a reason you think it wont work with BAT? BAT has a field called 'SmtpProxyAddresses' which can be used to populate it. You will have to export your existing user data, massage it a little and add the SMTP Proxy address and use the Update option to make the changes. You can also set the "Generate SMTP address......" in the template for new users.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmacx/8xcucmacappa.html

  • How to bulk import data into CQ5 from MySQL and file system

    Is there an easy way to bulk import data into CQ5 from MySQL and file system?  Some of the files are ~50MB each (instrument files).  There are a total of ~1,500 records spread over about 5 tables.
    Thanks

    What problem are you having writing it to a file?
    You can't use FORALL to write the data out to a file, you can only loop through the entries in the collection 1 by 1 and write them out to the file like that.
    FORALL can only be used for SQL statements.

  • Trouble creating a csv file to bulk import users

    Hi Guys,
    I'm trying to put a .csv file together to bulk import users. I'm practicing with one user right now. This is my CSV header:
    GivenName,Name,SamAccountNAme,Description,Department,OU,Enabled,Accountpassword,PasswordNeverExpires,CannotChangePassword
    This is my first line:
    newuser,newuser,newuser,newuser,Group2,OU=Group2,DC=CONTOSO,DC=COM,$True,P@ssw0rd,$True,$True
    When I test my file this is the output:
    GivenName                      : newuser
    Name                               : newuser
    SamAccountNAme            : newuser
    Description                       : newuser
    Department                      : Group2
    OU                                    : OU=Group2
    Enabled                            : DC=CONTOSO
    Accountpassword             : DC=COM
    PasswordNeverExpires    : $True
    CannotChangePassword : P@ssw0rd
    I obviously need to state the OU in the csv otherwise because the values are not in the correct place right now. Putting OU=Group2,DC=CONTOSO,DC=COM between brackets "..." doesn't help. Then all values are stated at 'GivenName'.
    Please help:-)

    Thank you Mahdi,
    When I do that, I get this:
    GivenName            : newuser,newuser,newuser,newuser,Group2,"OU=Group2,DC=contoso,DC=com"$True,P@ssw0rd,$True,$True
    Name                 :
    SamAccountNAme       :
    Description          :
    Department           :
    Path                 :
    Enabled              :
    Accountpassword      :
    PasswordNeverExpires :
    CannotChangePassword :
    There is one (,) missing between path and $true. I tested it and it works fine. However I am glad you found your way.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or
    to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • Account Relationships. Is it possible to do bulk imports?

    Hi,
    I would like to know if it´s possible to import csv files with information about Account Relationships. I need to create different types of accounts and then I need to import relationship between them (For instance: Company A will be a Suplier of CompanyB or CompanyB will be a customer of CompanyC).
    Is there any way to do bulk imports with this type of information?
    Also, what about reporting, is it possible to do reports or extractions of data to obtain this info?
    Thanks in advance

    Hi Antonio_A,
    Just in case you are looking for an alternative to CSV upload, you can actually perform the imports of Account Relationships via Web Services.

  • Maintain Sequence During Bulk Import

    I'm doing 'Mass Import' in transaction SOLMAN_WORKCENTER->START_IMPORT for a CTS project. But, I noticed that it triggers all the transports at once and import depends on the size of objects in the transport and not sequence.
    For example, if I've the following TRs in sequence and each TR is dependent on the previous one.....
    1 TR1
    2 TR2
    3 TR3
    If I trigger Bulk import for these TRs and TR1 has bulky objects, TR2 and TR3 will be imported before the dependent TR1, which will cause failure in import.
    Is there any way to trigger a mass import sychronously? So that TR2 will be moved only if TR1 is successful and TR3 will be moved only after if TR2 is successful.
    I'm facing the same issue in imports. The only solution to this problem was to move the TRs manually in STMS, one by one as per the sequence. It worked. But, it's not feasible for scenarios where the no of TRs in queue for imports are quite high.I checked the SAP help as well, but got no information on the same.
    Kindly suggest.

    Hello.
    Would you answer the following question:
    Have you already developed the program for transport requests import into a target (especially Productive) system ?
    With the possibility to maintain the requests sequence ?
    If so, then inform me, pls., how.
    Best regards,
       Vlad Beloglazov

  • CSCue79218 - Add support for multiple managers for EIM/WIM users

    Hi Cisco BU,
    Which release of Cisco EIM/WIM will this feature be introduced in?
    Thanks,
    Yav

    I honestly have no clue. Not a product I have any contact with.

  • EIM WIM v4.3(1) installation error

    Hi all,
    In my current setup
    a) 3 servers running app/msg/serv, database and web server all within the same domain
    b) broadcom hotfix was deployed
    c) windows authentication was used
    d) installation was done on the 1st server where all components were selected except web server.
    e) did a reinstallation of jdk & eim/wim was but unsuccessful as well
    Some errors were seen in the install log file. The main one seem to be related to application server <-> database server communication. The 3 databases (master, active, archive) were created by the installation. Subsequently there are few other errors (attached)
    <@> ERROR <@> [51:Thread-15] <@> ProcessId:588 <@> PID:0 <@> UID:12 <@> HttpSessionId:  <@> com.egain.platform.framework.dataaccess.dbconnectionfactory.DBConnectionFactory <@> initialize <@> I18N_EGPL_DATAACCESS-DRIVER_NOT_FOUNDcom.inet.tds.TdsDriver <@>
    java.lang.ClassNotFoundException: com.inet.tds.TdsDriver
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at com.egain.platform.framework.dataaccess.dbconnectionfactory.DBDataDriver.initialize(DBDataDriver.java:74)
    at com.egain.platform.framework.dataaccess.dbconnectionfactory.DBConnectionFactory.initialize(DBConnectionFactory.java:191)
    at com.egain.platform.framework.dataaccess.dbconnectionfactory.DBConnectionFactory.initialize(DBConnectionFactory.java:100)
    at com.egain.platform.framework.dataaccess.dbconnectionfactory.DBConnectionFactory.<init>(DBConnectionFactory.java:73)
    at com.egain.platform.framework.dataaccess.dbconnectionfactory.DBConnectionFactory.getInstance(DBConnectionFactory.java:92)
    at com.egain.platform.framework.dataaccess.DataAccess.getDBConnection(DataAccess.java:4207)
    at com.egain.platform.framework.dataaccess.DataAccess.executeDirectUpdate(DataAccess.java:689)
    at com.egain.platform.module.installer.ConfigureDatabaseServer.updateDatabaseTables(ConfigureDatabaseServer.java:150)
    at com.egain.platform.module.installer.ConfigureDatabaseServer.<init>(ConfigureDatabaseServer.java:54)
    at com.egain.platform.module.installer.ConfigureeGainService.install(ConfigureeGainService.java:50)
    at com.zerog.ia.installer.actions.CustomAction.installSelf(DashoA10*..)
    at ZeroGabm.run(DashoA10*..)
    Thanks!
    -JT-

    RK,
    Does the c:/users/rkm/x/apex/images folder exist?
    Does it contain lots of images?
    If not, what is the full path where /apex/images was unzipped?
    The parameter to the apxldimg script needs to point to the folder that contains the apex folder.

Maybe you are looking for

  • Newbie ?  Recording real instruments

    I have recorded an audio file (background music). I now want to record an instrument while the background music is playing. How do I do this? Do I need an audio interface? Bronko Powerbook G4   Mac OS X (10.4.7)  

  • Can I use a netgear DG834N rather than HH with inf...

    I'm either really stupid, or my HH is not performing as I would expect. The firewall doesn't seem to want to trun off, port forwarding appears to be intermittent, DMZ doesn't seem to work as documented. Is it possible to switch back to my old router

  • MSS BP shows runtime errors in every MSS iView

    We are running EP6 SP2 Patch 3 HF 7. We loaded MSS version BUSINESS PACKAGE FOR MANAGER SELF-SERVICE_60_1_2 with Service Pack. Every single iview under MSS gives Portal Runtime Errors. Here is a snippet from the log. We are running SAP J2EE 6.20 vers

  • Backing up your mac to external drive and how to access individual files

    I have managed to back up the information on my computer to a external drive as a whole but need to access different files, projects so that i can then delete them from my computer to save space. how do I access the different files on my external dri

  • Old business, New Website design problem

    I am attempting to build an entirely new website for an old business using Dreamweaver MX. (version 6).  I want a very basic site on which to advertise my menu and to which I can post a few pictures. Obviously, I want it somewhat professional looking