EInsight - Accessing Fault information when Catch All is used

When you do a Catch all from a Scope, is it possible access the Fault information, so that it may be passed on to the caller of the process?
-Mario

yes you can access fault information in the catch block of BP and this can be set to pass back to the calling source.

Similar Messages

  • Is there a way to access photo information when viewing on iPhone?

    Using iPhone 5S/ IOS 7.1.1.   In iPhoto I have edited my pictures with information (i.e., name of photo, description).  I would like to access (at least) the name of photo/file on my iPhone.  Any way to see the photo file name on phone?

    I cannot believe this problem hasn't been rectified yet!
    If I use the pre installed ringtone as an alarm and set it low so I don't jump out of my skin, then my call volume is too low the next day, so have to change it.
    If I use a song as an alarm, I have the same problem, but its when I watch a video. I set it quiet, then jump out of my skin the next morning if I've left it tuned up after watching YouTube. Also works the other way if I've watched a video with the sound down, and forget to turn it back up, then I don't hear my alarm, which makes me late!
    It could also do with an ascending volume option, so it starts nice and quiet to wake you gradually. My old phones from pre iPhone days had these features and they worked great.
    Surely this isn't that much of an issue to sort out. Yet I've seen posts back as far as 2006 complaining about it.
    Come on apple pull your finger out!

  • How do you use family share when we all currently use the same Apple ID but different iCloud accounts?

    our family is currently using all the same Apple ID so we don't have to purchase thing twice, but now I want to set up the family share. Do we all have to have our own Apple ID to set up the family share? We do all have separate iCloud's accounts, I'm not sure if that even makes a difference.

    Hello me1002,
    That is a good question. Everyone will need their own Apple ID that is signed into iCloud and iTunes. When setting this up, someone will need to be the Organizer so whom ever it is will champion this. Then everyone else will need to sign in to each respective accounts and then the organizer will need to send out invites to join Family Sharing. If you get that all setup, remember that when making purchases from those Apple ID will belong to that specific Apple ID so if anyone leaves, others will not have access to that purchased content. 
    Start or join a family group using Family Sharing
    http://support.apple.com/en-us/HT201088
    Regards,
    -Norm G. 

  • No internet access for laptop when another device is using wifi

    we have both an airport and an at&t "2wire" modem. The airport is plugged into the wall outlet, the modem is connected by a wire to the airport. The modem has a wifi network and that's the network that we connect each of our apple devices to (laptop, iphone, a couple of ipads). when the ipad or iphone is using the wifi, we can't get internet access on our laptop. we just get an error message like "another device is currently using your wireless." any idea why this is happening? the only way to then fix the problem and get internet access on the laptop is to turn off the wifi on the other device, unplug and then plug in the airport, and restart the laptop. 

    Thanks for the update. If you want to use the AirPort Express to extend the range of the wireless network provided by the 2Wire modem (actually a combination modem & wireless router or gateway) that is possible. What you would have then is a single network with greater range to cover your entire home (hopefully.) This should also resolve the issue with not all of your network clients being unable to connect.
    Since you have the two network devices already interconnected by Ethernet (wire), you just need to configure them both for a "roaming" network. Please check out the following Apple Support article for details.

  • Can't access some sites after doing all suggestions using FF 15 and XP SP3..What to do?

    Shut off anti-virus software, including firewall. Tried all settings of
    proxy selections; cleared cache, etc...all things advised on this site
    and elsewhere. Reset Firefox. Quit Firefox and tried IE. Nadda.
    Been trying to access some sites and fix the problem for about a
    month, now.
    Hell, I can't even access mosilla forums.

    Hi Punice
    first try to disable JavaScript from : Firefox button (or Tools menu) > Options > Content panel > '''UNcheck''' Enable JavaScript.
    if the above does not help check with a few malware/virus scan programs for virus. You need to use all programs because each detects different malware. Make sure to update each program to get the latest version before doing a scan.
    http://housecall.trendmicro.com/ - Trendmicro online
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/antivirus-partners/windows-xp.aspx
    check also for a rootkit infection with TDSSKiller.
    http://support.kaspersky.com/viruses/solutions?qid=208280684
    thank you

  • Is there a way of programmatically accessing fault/error/BIT information from the PXI-6723 during runtime?

    In fact can you access fault information for all PXI cards?  How do i detect that there is a fault with a board from within the software so i can report this to a higher level application?
    Thanks
    Martin

    Hi Robert,
    So in essence what you're saying is that if a component on the device fails there is no way to know this as long as the device is still communicating with the PC? It would appear that the Self Test function is a bit of a misnomer - it doesnt actually do what it says on the tin.
    So which of the 2000 errors can actually be returned by this function call?  I appreciate that there are a broad range of errors but I would like to know which one(s) can in reality be returned by this function.  I need to somehow categorise the errors into whether or not the device is healthy so i can communicate this to our customers software (wo have no knowledge of internal NI error codes) so they can decide whether the board needs replacing.  Of the 2000 error codes which of these could potentially relate to a hardware failure of some sort as opposed to a software configuration error.
    I have found this thread which details some error codes on a NI 446X device (is there something like this for all errors on all devices?):
    http://digital.ni.com/public.nsf/allkb/95328C2FAF9DA99A862576E200785C11?OpenDocument
    Lastly where in the NI DAQ help references are the list of error codes and meanings as listed in NIDAQmx.h.  For instance what does DAQmxErrorPALThreadControllerIsNotThreadCreator actually mean?  I don't want to wait for the error to occur in my system before I get information on what it means - it would be useful to know and understand before I write the software what errors may occur on each device.
    Thanks
    Martin

  • Renewing Flash Access Certs when a HSM is used

    Hi
    our operations team came across a potential problem in the process of renewing Flash Access certs for
    When a HSM is not used: old certs are referenced in the FA config file so that they can be used to decrypt content that has been encrypted with the old certs. We have done this in the past and works fine.
    When a HSM IS used: the FA config file needs to be able to reference old certs stored on the HSM. It looks like the FA application is unable to do this. It is not possible to remove the private key from the HSM and so it is not an option to store the old certs locally on the license server (not that we would want to do that anyway).
    I’m not sure if it’s an option to point FA to the HSM to look for the certs. Any ideas how this can be done?
    thanks

    Hi DeclanK,
    Take a look at the flashaccess-refimpl.properties file.  The bottom of it should have all sorts of HSM-only configuration settings that you can modify to suit your needs.  You'll see that there are several additional server certificates (ServerCredential.Alias.1=, etc...) that you can set for your license server.  This is where your older certificates go.
    HOWEVER, please note that your license server will not work unless you also have a non-expired certificate set (ServerCredential.Alias=).
    cheers,
    /Eric.
    # HSM Properties #
    # Enables or disables the packager use of HSM. If this is set to true, then set up all the HSM related properties.
    RefImpl.HSM.Enabled=false
    # Full path of configuration file name passed to sun.security.pkcs11.SunPKCS11(configFile)
    RefImpl.SunPKCS11.ConfigFileName=[pkcs11-filename.cfg]
    # HSM partition password ** See note above regarding passwords **
    #RefImpl.HSM.PartitionPWD=[your-hardware-password]
    # Alias of Adobe-issued server transport credential (certificate and private key) stored on HSM
    # When HSM is enabled, use this property instead of HandlerConfiguration.ServerTransportCredential and
    # HandlerConfiguration.ServerTransportCredential.password
    #RefImpl.HSM.HandlerConfiguration.ServerTransportCredential.Alias=[transport_cert_alias]
    # Aliases of additional Adobe-issued server transport credentials (certificate and private key) stored on HSM
    # When HSM is enabled, use this property instead of HandlerConfiguration.AdditionalServerTransportCredential.n and
    # HandlerConfiguration.AdditionalServerTransportCredential.n.password
    #RefImpl.HSM.HandlerConfiguration.AdditionalServerTransportCredential.Alias.1=[transport_c ert_alias]
    #RefImpl.HSM.HandlerConfiguration.AdditionalServerTransportCredential.Alias.2=[transport_c ert_alias]
    # Aliases of authorized Domain CA certificates stored on HSM
    # When HSM is enabled, use this property instead of HandlerConfiguration.DomainCAs.n
    #RefImpl.HSM.HandlerConfiguration.DomainCAs.Alias.1=[domain_ca_cert_alias]
    #RefImpl.HSM.HandlerConfiguration.DomainCAs.Alias.2=[domain_ca_cert_alias]
    # Alias of Adobe-issued license server certificate stored on HSM
    # Used to verify validity of Machine Revocation List
    # When HSM is enabled, use this property instead of RevocationList.verifySignature.X509Certificate
    #RefImpl.HSM.RevocationList.verifySignature.X509Certificate.Alias=[license_server_cert_ali as]
    # Alias of Adobe-issued license server credential (certificate and private key) stored on HSM
    # When HSM is enabled, use this property instead of LicenseHandler.ServerCredential and
    # LicenseHandler.ServerCredential.password
    #RefImpl.HSM.LicenseHandler.ServerCredential.Alias=[license_server_cert_alias]
    # Aliases of additional Adobe-issued license server credentials (certificate and private key) stored on HSM
    # When HSM is enabled, use this property instead of AsymmetricKeyRetrieval.ServerCredential.n and
    # AsymmetricKeyRetrieval.ServerCredential.n.password
    #RefImpl.HSM.AsymmetricKeyRetrieval.ServerCredential.Alias.1=[license_server_cert_alias]
    #RefImpl.HSM.AsymmetricKeyRetrieval.ServerCredential.Alias.2=[license_server_cert_alias]
    # Alias of Adobe-issued domain CA credential (certificate and private key) stored on HSM
    # When HSM is enabled, use this property instead of DomainRegistrationHandler.ServerCredential and
    # DomainRegistrationHandler.ServerCredential.password
    #RefImpl.HSM.DomainRegistrationHandler.ServerCredential.Alias=[domain_ca_cert_alias]
    # Alias of Adobe-issued Packager credential (certificate and private key) stored on HSM
    # This parameter is used when converting FMRMS 1.x metadata to Adobe Access format.
    # When HSM is enabled, use this property instead of MetaDataConverter.SignatureParameters.ServerCredential
    # and MetaDataConverter.SignatureParameters.ServerCredential.password
    #RefImpl.HSM.MetaDataConverter.SignatureParameters.ServerCredential.Alias=[packager_cert_a lias]
    # Alias of Adobe-issued License Server Certificate stored on HSM
    # When HSM is enabled, use this property instead of V2KeyParameters.KeyOptions.AsymmetricKeyOptions.Certificate
    #RefImpl.HSM.V2KeyParameters.KeyOptions.AsymmetricKeyOptions.Certificate.Alias=[license_se rver_cert_alias]
    # Alias of Adobe-issued server transport certificate stored on HSM
    # When HSM is enabled, use this property instead of V2KeyParameters.LicenseServerTransportCertificate
    #RefImpl.HSM.V2KeyParameters.LicenseServerTransportCertificate.Alias=[transport_cert_alias ]
    # Alias of Key Server's Adobe-issued license server certificate stored on HSM
    # When HSM is enabled, use this property instead of HandlerConfiguration.KeyServerCertificate
    #RefImpl.HSM.HandlerConfiguration.KeyServerCertificate.Alias=key_server_cert_alias

  • Mail 4.5 not retrieving catch-all mail from Pop Server.

    I use email fowarding for a domain (hosted at Godaddy) to forward to my verizon email account. For example: [email protected], [email protected], and [email protected] are forwarded to [email protected]  The Mail 4.5 client on my MacBook Pro (OSX 10.6.8) retrieves all this forwarded email correctly from the Verizon Pop3 server.
    I also have one of the domain email aliases setup as a catch-all account. For example [email protected] is configured as the catch all. Mail addressed to [email protected] is also retrieved from the Pop3 server correctly.
    But any mail directed to the catch-all account because the email address is invalid such as [email protected] is not retrieved by Mail 4.5 client.
    The 'catch-all' email is being forwarded correctly to my Verizon Pop server. If I log in to Verizon Webmail I can see the forwarded 'catch-all' emails in the Webmail Inbox. Also if I use Outlook 2010 on my PC to retrieve my Pop mail, it correctly brings down the 'catch-all' email.
    It certainly appears like something internal to Apple Mail is filtering the 'catch-all' email and not retrieving it from the Pop3 Server.
    If you can understand what I'm trying to report - can you help me figure out what is wrong?

    I now do want to catch all email as it has become my lives work to report spam.
    So I figured out an easier way to catch all email using simply the serveradmin command-line tool (this only takes email that would otherwise bounce):
    sudo serveradmin settings mail:imap:lmtp_luser_relay_enabled = yes
    sudo serveradmin settings mail:imap:lmtp_luser_relay = catchallusername
    sudo postfix reload

  • Support for  catch all email address

    Does anyone know if mail server has support for  catch all email address

    I now do want to catch all email as it has become my lives work to report spam.
    So I figured out an easier way to catch all email using simply the serveradmin command-line tool (this only takes email that would otherwise bounce):
    sudo serveradmin settings mail:imap:lmtp_luser_relay_enabled = yes
    sudo serveradmin settings mail:imap:lmtp_luser_relay = catchallusername
    sudo postfix reload

  • Fault information from bpel process when exception happens

    How to extract all the fault information from bpel process when exception happens?
    Are there any other methods other than "ora:getFaultName(), ora:getFaultAsString()"
    When I use "ora:getFaultName(), ora:getFaultAsString()", I get the below message,so I am wondering whether
    I can get any more information about the exception as mentioned below - "detailed root cause described in the exception message" -> how do I get it?
    Check the detailed root cause described in the exception message text and verify that the XPath query is correct.

    Hi,
    As far as I know, it's not possible to get the exception message with a catch all. You need to catch each exception separately, and the you will be able to get each message.
    Regards
    Gustavo

  • I accidently loaded my daughter's itunes and apps into my iphone 4.  How can I delete all of her information and be able to use my itunes login and password again so that I can access my apps?

    I recently purchased an Iphone 4 and was not aware that I had to have separate ITunes account.  My daughter and I share a computer and apparently she is using the main account on the computer.  I went to download some songs from her ITunes and it not only downloaded all of her songs on my phone but also her apps.  I do not want her apps.  When I went to use the apps that I had on my phone before downloading her ITunes information, they would not open and only go back to the main screen.  When I access her apps, they work.  Help!!! How can I restore my settings and just take all of the information that I downloaded from her ITunes out and set my own ITunes on the same computer.  Any help would really be appreciated.

    Create your own user account on your computer, open iTunes, log into your iTunes account on the iTunes Store then sync your iPhone.
    http://support.apple.com/kb/HT1495

  • BPEL catch all block doesn't catch fault

    Hi,
    I have a catch all block in my BPEL process. One instance tried to write to the Oracle database without success throwing a fault which wasn't taken by BPEL's catch all. I see an error on invoke but it does not go to catch all block.
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'merge' failed due to: DBWriteInteractionSpec Execute Failed Exception. merge failed. Descriptor name: [writeCountry.Country]. Caused by java.sql.SQLRecoverableException: No more data to read from socket. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered retriable, likely due to a communication failure. Because the global transaction is rolling back the invoke must be retried in a new transaction, restarting from the place of the last transaction commit. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "17410" to your deployment descriptor (i.e. weblogic-ra.xml). ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    Global retry rollback fault thrown.
    The current JTA transaction is aborting due to an user rollback fault being thrown. The upstream component should retry in a new JTA transaction upon catching this fault.
    This exception was caused by a global retry fault being thrown from downstream component. The user had directed the BPEL engine to roll back the current JTA transaction and retry within new JTA transactions for the specified number of times and retry interval.
    There is no action recommended.
    Ah, I have one more question, I have a BPEL process wich write to the database to the table X. Some time ago i extended the table X and add one more column. Why does BPEL lost all data in dbadapter and does not sygnalize any error when invoked adapter? Usually when I drop or alter table i get an error message. This time I see that the transformation which was before invoke to dbadapter was done correctly but I can see no data in invoke which should be written
    All environment is on 11.1.1.6, BPEL 2.0
    Edited by: 863909 on 2012-08-29 01:05

    Aye. My catch all block is defined for a parent scope. Just some arrors are not catch by catch all block (the same as for OutOfMemoryError for java - which will never be catched). I just wonder, because my red invoke activity in the EM sygnalizes error and throw error message but catch all block does not get it. Process stoped on error invoke and not go into catch all.
    Change table aspect. I don't have a problem, because i deleted old and implemented new adapter. It works. I just wonder why when I deleted an atribute (column) from DB I got en error and process stops, but when I extended a table, my process were runing to the end and was marked as finished completely. Something is wrong here, because adapter didnt write all data it should write. Process were going and was finished without throwing an error.
    Edited by: 863909 on 2012-08-29 04:14

  • Instance status set to Faulted when catching an Exception in a BPEL flow

    Hi,
    I have a question regarding BPEL & catch (SOA 11.1.1.4.0). When the composite catch an exception (using catch-all block), the status of the composite is set to Faulted immediately even when the flow continue to run. In this specific case in the flow, the problem is handled in the catch flow and I want to continue with the flow.
    So when I'm looking at the Enterprise Manager console, I see many Faulted instances and I don't really know the "correct" status.
    Is there a way to actually use the catch-all block but still have the status set to Completed ? If not, are there any consequences. For example, is the recovery of instances continue to work ?
    Thanks,
    Ronen

    Hello,
    1403 is out of range for the return value, see https://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1342602684748
    We can raise errors in a given range but the shell will only keep an
    unsigned byte in the status return value (values 0..255).  It takes our exit file and
    just looks at that last byte.
    It also shows how to get around this limitation.
    Regards
    Marcus

  • I had to take my hp back to factory setting and reinstall itunes, when I tried to use Itunes match it said i had to Deauthorize all my computers. I am using the same computer and desperately need access to my music.

    I had to take my hp back to factory setting and reinstall itunes, when I tried to use Itunes match it said i had to Deauthorize all my computers. I am using the same computer and desperately need access to my music.

    When you reset to factory settings, the computer is de-authorised.
    In iTunes menu Store > View Account > sign in > App Store > Deauthorise All.
    Once done, authorise this computer iTunes.
    Note: you can only do that once a year.

  • My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    You need to connect to iTunes and restore.
    iOS: Not responding or does not turn on
    You may need to put the device into recovery mode, this is covered in the link on this page.
    Did you back up the device?

Maybe you are looking for

  • Sed Request Regular Expression Format

    A quick question.... There are lots of different syntaxes for regular expressions and lots for SED. With the sed_request and sed_response filter I have tried different syntaxes for marking word boundaries, but don't know which to use. The \b syntax i

  • H.263 and MPEG-4 codec

    Hi All, I badly require java source codes for H.263 and MPEG-4 codec. If anybody can help me to find these, I greatly appreciate. Even some help to develop one by my own would be a great help. Thanks in advance. Eranga

  • Regarding "EXIITS".

    Hi To All! I don't know about User exits. Can you please help tell me about User Exits and how can I learn User Exits fast! 1. how to find the transaction code for the particular user exits in smod. 2. how to view the menu exits,Screen exits,field ex

  • Can i enlarge the fonts in the history palette or info palette?

    Hi is there a tweak to enlarge fonts in the histrory palette or info palette in photoshop cs3? thanks

  • How can I reset an iPhone 4s calendar from the Heisei calendar back to a US calendar?

    Equipment is an iPhone 4s running iOS 7.0.4.  The calendar pops up on my wife's phone as "25 Heisei".