EIONode.xnode the governing library for this node cannot be found

I have a question concerning the LabView FPGA I/O-Node.
I want to use an FPGA I/O-node to analyze data coming from an analog input. But everytime I try to insert the I/O-node into my vi, LabView tells me it cannot find the file "EIO_TerminalDirection.ctl", which seems to be needed by "EIONode.xnode", if i got it right.
Some time ago, i could actually use this node without any problems. I'm not sure, but i think in the meantime i did a mass compile on the whole LabView directory, because LV kept asking me to do so (i had several other problems then, which disappeared after the mass compile)
If you have any ideas, anything, please post, because i cannot find any hints anywhere and i do NOT want to install the whole environment again!

Hello choluteca,
wich LV version do you use? Did you try to repair the LV version? Open system control under XP (Start/Programme/Systemsteuerung). Switch to entry software and move to National Instruments (repair). Please do this for lv, lv fpga and lv rio and try again the LV FPGA I/O node.
Kind regards,
Elmar

Similar Messages

Getting error REP-1352: The fonts specified for this report cannot be found

Dear Friends,
I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
I searched internet and found the reason for the issue i.e., as follows.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
Please help me ASAP.
Thanking you.
With Kind Regards,
Senthil Alagu .P.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

REP-1352: The fonts specified for this report cannot be found for the char

We have migrated all our character reports to oracle 10g - sun solaris machines.
Now, these reports give us an error....
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG
Does anyone have suggestions.
desformat - DELIMITED
mode - character
Thanks

Hi,
Did you check this DocId:203781.1. I think it will help you problem.
Moreover does your X-server or vnc server on HP work fine.
In the past with HP version 11.0 there was always problem with HP x-server. just check that your x-server is runinig will ex. x-clock.
Cheers,
Hamdy

While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

DCDIAG /test:dns result is pested here.
C:\Users\administrator.SUD>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MUM-ADS-01
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: Connectivity
         ......................... MUM-ADS-01 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... MUM-ADS-01 passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sud
   Running enterprise tests on : sud.in
      Starting test: DNS
         Test results for domain controllers:
            DC: MUM-ADS-01.sud.in
            Domain: sud.in
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Forwarders/Root hints (Forw)
                  Error: Root hints list has invalid root hint server:
                  a.root-servers.net. (198.41.0.4)
                  Error: Root hints list has invalid root hint server:
                  b.root-servers.net. (128.9.0.107)
                  Error: Root hints list has invalid root hint server:
                  c.root-servers.net. (192.33.4.12)
                  Error: Root hints list has invalid root hint server:
                  d.root-servers.net. (128.8.10.90)
                  Error: Root hints list has invalid root hint server:
                  e.root-servers.net. (192.203.230.10)
                  Error: Root hints list has invalid root hint server:
                  f.root-servers.net. (192.5.5.241)
                  Error: Root hints list has invalid root hint server:
                  g.root-servers.net. (192.112.36.4)
                  Error: Root hints list has invalid root hint server:
                  h.root-servers.net. (128.63.2.53)
                  Error: Root hints list has invalid root hint server:
                  i.root-servers.net. (192.36.148.17)
                  Error: Root hints list has invalid root hint server:
                  j.root-servers.net. (192.58.128.30)
                  Error: Root hints list has invalid root hint server:
                  k.root-servers.net. (193.0.14.129)
                  Error: Root hints list has invalid root hint server:
                  l.root-servers.net. (198.32.64.12)
                  Error: Root hints list has invalid root hint server:
                  m.root-servers.net. (202.12.27.33)
               TEST: Delegations (Del)
                  Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                  [Missing glue A record]
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000006] Intel(R) PRO/1000 MT Network Connection:
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     gc._msdcs.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     gc._msdcs.sud.in
               Warning: Record Registrations not found in some network adapters
         Summary of test results for DNS servers used by the above domain
         controllers:
            DNS server: 128.63.2.53 (h.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.63.2.53
            DNS server: 128.8.10.90 (d.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.8.10.90
            DNS server: 128.9.0.107 (b.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.9.0.107
            DNS server: 192.112.36.4 (g.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.112.36.4
            DNS server: 192.203.230.10 (e.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.203.230.10
            DNS server: 192.33.4.12 (c.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.33.4.12
            DNS server: 192.36.148.17 (i.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.36.148.17
            DNS server: 192.5.5.241 (f.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.5.5.241
            DNS server: 192.58.128.30 (j.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.58.128.30
            DNS server: 193.0.14.129 (k.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 193.0.14.129
            DNS server: 198.32.64.12 (l.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.32.64.12
            DNS server: 198.41.0.4 (a.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.41.0.4
            DNS server: 202.12.27.33 (m.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 202.12.27.33
         Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
            Domain: sud.in
               MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
         ......................... sud.in failed test DNS

Hi Meinolf,
Please find the IP Details as well as DNS test results.
C:\Users\Administrator.SCI>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MDCDCDNS
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: Connectivity
         ......................... MDCDCDNS passed test Connectivity
Doing primary tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
ERROR: NO DNS servers for IPV6 stack was found
         ......................... MDCDCDNS passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sci
   Running enterprise tests on : sci.com
      Starting test: DNS
         Test results for domain controllers:
            DC: MDCDCDNS.sci.com
            Domain: sci.com
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000009] Microsoft Virtual Network Switch Adapter:
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     gc._msdcs.sci.com
               Warning: Record Registrations not found in some network adapters
               MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
         ......................... sci.com passed test DNS
C:\Users\Administrator.SCI>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MDCDCDNS
   Primary Dns Suffix . . . . . . . : sci.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : sci.com
Ethernet adapter Local Area Connection 7:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : External Internal Virtual Network
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.64.7.1
   DNS Servers . . . . . . . . . . . : 10.64.7.32
                                       10.64.7.35
                                       10.20.33.72
                                       10.20.33.71
   NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection 6:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : TEAM : Team #1
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
42A}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
901}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Please check and revert back for any queries..
Thanks...
Deva Self-trust is the first secret of success.

AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
C:\Users\Administrator>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = R210_1_2K12
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: Connectivity
         ......................... R210_1_2K12 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\R210_1_2K12
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... R210_1_2K12 passed test DNS
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : bcas-tbf
   Running enterprise tests on : bcas-tbf.local
      Starting test: DNS
         Test results for domain controllers:
            DC: R210_1_2K12.bcas-tbf.local
            Domain: bcas-tbf.local
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server 172.16.0.202:
                     gc._msdcs.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     R210_1_2K12.bcas-tbf.local
                     Warning:
                     Missing AAAA record at DNS server ::1:
                     gc._msdcs.bcas-tbf.local
               Warning: Record Registrations not found in some network adapters
               R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
         ......................... bcas-tbf.local passed test DNS
IPCONFIG info:
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : R210_1_2K12
   Primary Dns Suffix . . . . . . . : bcas-tbf.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : bcas-tbf.local
Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
) #36 - Virtual Switch):
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
   Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
   IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 172.16.0.1
   DHCPv6 IAID . . . . . . . . . . . : 335554233
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
   DNS Servers . . . . . . . . . . . : ::1
                                       172.16.0.202
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
I'm unsure of what the problem is or what to do next. Thank You.

Disable IPv6 according to Pauls blog:
Disabling
IPv6 on Windows 2008
After disabling run:
ipconfig /flushdns
ipconfig /registerdns
restart the netlogon service or reboot.
For co-existence from IPv4 and IPv6 see:
Configuring DNS for IPv6/IPv4
Coexistence
IPv6
for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
IPv6 for the Windows Administrator: IPv6 Fundamentals
Hopefully, that fixes your issue. Added some links to read in cause you want to.
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Cisco TCS "the overview for this server cannot be found"

Hi,
I have a problem on my TCS server, a message is displayed "The overview for this server can not be found"
This error message appears when I last reinstalling the usb image provided by Cisco,
Thank's
Billel

Hello Billel -
I presume because you mention USB image, you're running a 3rd generation TCS appliance?
Have you tried to repair the TCS application through Add/Remove Programs to see if that resolves the issue? I've had that issue myself once on a 2nd Generation TCS appliance, I tried a repair and uninstall/reinstall of the TCS application, eventually managed to get it back up and running, though I don't recall my actual steps.
Also just in case, because you did a reimage, did you back up the serial number, checksup, and release/option keys from the registry located in HKLM > SOFTWARE > Wow6432Node > TANDBERG > TCS. If you're missing any of that, you can obtain release and options keys from Cisco License Portal, select "Get Other Licenses", then "TelePresence Licenses to Resend". You can get the checksum by contact TAC.

While trying to upgrade, I get this error message on the license aggreement window pup-up: The license folder for this version cvannot be found.

When prompted to upgrade, I get an error message on the License agreement pup-up window.
Consequenty, I connot continue with the normal aggrement procedure to accept and instal.
== It started when I was prompted to upgrade.

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

The Licence for this music cannot be found

When I try to play any tracks on OVI player I get the error shown in attachment error1.jpg.
I have followed the instructions and accessed my account and in downloaded history I can see the album as shown in attachment error2.jpg
When I click on the album i am shown a list of tracks which all show a price against them as shown in attachment error3.jpg
Comes With Music was sold to me on the grounds that I could keep the music forever, and all I can say is that it appears to not be true. Beginning to believe I have been conned.
Has any one had the same issue and have they managed a fix yet.
I have had a reply from the UK and Ireland contact centre which does not fix the fault.
The reply is as follows:-
Thank you for contacting Nokia Email Care.
In response to your concern, please be advised that your account has already expired, that is why when you go to Music Store and Download Music, it shall ask you to pay. However, if you will download these files from your download history, you will not be asked for any payment.
To download from history, please follow the steps below:
1) Go to Account
2) Download History
3) Subscription
4) Select track
5) Download
For future reference, please feel free to check our website. Kindly refer to the link below:
http://www.nokia.co.uk/home/support
You may also call our Customer Care Hotline at 0845-045-5555, Mon-Fri 9am-7pm (except bank and public holidays).
Please do not hesitate to contact us again if you have any further questions.
Yours sincerely,
Patrick C.
Nokia Service Professional
UK & Ireland Team
Nokia Care
[THREAD ID:1-55RSLZW]
All the suggested fix does is suggest what i told them I had already tried.
Come on Nokia get a grip.
Attachments:
Error1.jpg ‏19 KB
error2.jpg ‏7 KB
error3.jpg ‏27 KB

So you have Comes With Music/Ovi Music Unlimited?
If you have changed your PC or installed a new version of Windows on it, then the identity with which the PC identifies itself to the service will have changed, and because the DRM is linked to the older PC or OS, your PC needs to be updated in the service. of Ovi Player doesn't offer you the chance to register your new PC when you log in, you'll need to call Nokia to get the old PC link manually released.

Volume for "Untitled DVD" cannot be found

HELP!
im trying to back up my pictures , and when i insert my blank disk, the message "Volume for "untitled DVD" cannot be found."
do you know any way to burn pictures?

Wow...
That's so simple.
Thx Kappy

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

When I try to open ITunes it brings up a box that says the iTunes Library. itl file cannot be found or created. the default location for this fie is in the itunes folder in the music folder How do I solve this

My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says
The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folder.
an I cant figure out what to do to get itunes to load so I can't use itunes at all which ***** since it also means I right now I can't add music to my ipod or apps or anything. So hopefully someone can tell me what happened and how to fix it or solve it

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

I need help every time my iTunes library updates i get this error messege: The iTunes.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. but the file should be there.

Every time I have to upgrade iTunes it gives me this messege:'The default location for this file is in the "iTunes" folder in the "Music" folder.' the file should be there but I don't understand why it does this every time Apple upgrades the Itunes library. Its on the computer somewhere but it only affects this login on my computer (meaning on this Windows Account). Why does my iTunes do this? Then I have to spend hours placing all my libraries back together and all my music back into the library. Which usually takes me a few days to sort all out. What is wrong with my iTunes? The iTunes folder is a folder in my Music folder where I store the iTunes music/files/libraries at on my computer so I can have all of the iTunes files in one place on my computer.

I have a Windows 7 operating system my computer runs from.

EIONode.xnode the governing library for this node cannot be found

Similar Messages

Maybe you are looking for