EIS data load issue (04/24).

Hi,
I am trying to load data using EIS 7.1 to an ASO cube. The log says load was done successfully and that aggregation failed. However, there is no data at the zero level after the load (which could be why aggregation failed). It was running successfully earlier. I changed a dimension from Multiple Hierarchy to Dynamic...not sure if this caused the problem. What are the potential causes? Please help.
Thanks.

Hi,
Try this:
1. Backup model and metaoutlines
2. Open model, delete connection (and dimension for which You are having a problem)
3. Save model (open again and add the dimension)
4. Open one of Your metaoutlines and do the same with this dimension
5. save it and make test
Please let me know if it works fine (I have such a problem and usualy it was the right solution :) )
regards
Karol

Similar Messages

EIS data load issue

I have a dimension in the metaoutline as given below heirrachyORG ~ -> State ~ -> Division ~ -> Agency ~ -> Agent ~ I am able to build the heirrarchy in this order , but the data that I load needs a diffirent filter on each dimension level for example : For state load data where type = 5For division load data where type = 4For agency load data where type = 3For Agent load data where type = 2 When I put a filter on each level it uses the 'AND' operator which I do not want. Please advice how this can be accomplished in EISThanksande

Load the member data in four different passes and set the appropriate filter for each pass. The filter on the first pass would be where type = 5, on the second pass where type = 4, and so on.

Data Load Issue "Request is in obsolete version of DataSource"

Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
Samit

Hi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu.

TileList data load issue

I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

EIS data load via rules file

Hi,
PLease let me know the process to control the EIS data load into essbase using a rules file. I did not find the option in EIS. please help me.
Thanks,
pr

In EIS
1) You have to define the Logical OLAP Model connecting to the relational source.It defines the joins between fact table and dimension tables.
2) Based on the OLAP Model You have to create meta outline which defines the rules for loading members and data into essbase.

Demantra Data Load Issue

I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
Thanks

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

EIS data load slow

Greetings all,
Windows Server 2003 SP2. SQL Server 2000 SP3. Hyperion 9.3.1.
I am running an EIS data load, and the load time is progressively longer depending on the number of records loaded.
For example, when doing a data load of 1,000,000 records, it takes 2 minutes to load the first 500,000 records but an additional 10 minutes to load the next 500,000 records.
Is there any reason for this, and can I do anything about it?
Regards,
Paul.

Since non-Streaming mode is the only mode that EIS leverages to load data, it's not surprising that- Data loads are slow.
If you want to continue using EIS for data loads, I believe- All you can do is- To refine/tune your User-defined SQL.
You've mentioned about just few million records. However, in the volume-intensive environments where records are in the order of hundreds/thousands of millions, the majority would think of using EIS only for Metadata load & deferring data load to the flat file data extracts, which is way faster. At the same time, you'd have to consider if the extraction time required is not too much that it defeats the very purpose.
- Natesh

Error in 0EMPLOYEE Master Data Load Issue

Hi,
We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
Can you please advice, how can we fix this issue ASAP as its a production issue?
Thanks!
Best regards,
Venkata

> Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
Cheers,
Sree

Master data loading issue

Hi gurus,
 Presently i am working on BI 7.0.I have small issue regarding master data loading.
 I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
 How can i handle this.
Best Regards
Prasad

Hi Prasad,
Following is happening in your case:
Loading 1st Time:
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
Loading 2nd Time:
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi

EIS Data load

Hi all,
I am bit confused about loading data via EIS. We have two process one is to load data via rule file hisdld created by EIS and second is using user defined sql query. Are both these methods independent of each other or not?
When i say independent i mean if we make some changes in user defined sql and load data are those changes first refelected in the rule file and then data load process occurs using this rule file or data load occurs just via sql quey we run
It would be great if somebody could clarify the same.
Thanks in advance!!

Thanks for the reply.
Yes i am talking about sql query within EIS so if i understood it right by your post if i make changes to that user defined sql code(within EIS ) it will make the changes in the data load rule file created by EIS i.e "hisdld". So If we talk of a data load process within EIS the User defined sql is used to create data load rule "hisdld" and hence they are dependant on each other.
Edited by: user10859098 on Jan 29, 2009 10:54 AM
Edited by: user10859098 on Jan 29, 2009 10:54 AM
Edited by: user10859098 on Jan 29, 2009 10:56 AM

EIS data load problem

Hi,
I use user defined sql to do a data load using EIS 7x
When i run the sql in toad just to see the data I see 70000 rows
But when I use the same sql in the userdefined sql and try to load data...I dont know why EIS says that it loaded around 69000 rows and also I see no rejections...
I even made some sql changes to find out what are the records that are not being loaded..and I see some rows when I run a sql in toad and if i use the same in EIS its not loading those rows which I can see in toad for the same sql ...
This is very strange.. Can any one help me with this,..??

Glenn-
I dont think there is anything unique about the missing rows..
Actually the a part of code has been added to the previously working view(which i use to load data) to bring in some additional data...
I took that part and tried to load data...and I see no data being loaded or rejected..
It just says that records loaded "0"..rejected 0...
but the same part brings in the required additional data... when exectued in toad..
and about the excel sheet lock and send..I did that a week and as you said to my surprise it loads everything....
This was the test bu which I figured out that EIS is not even able to load a part of data...and I found the exact part of data by going through it closely..
So I think this is something to do with sql interface..
And I did not understand the last lines in your post...
/////I know when I do regular Sql interface some data types don;t load and I have to convert them to varchar tto get them to work. If the Excel file and Flat file loads work, look at that//////
what did convert to varchar???
Excel load works fine..So I think its something similar to what you mentioned in your post...
Can you please explain it ...

Data Loading issues in PSA and Infocube

Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bs

hi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R                56             100
R                53             200
S                54              200
after aggregation u will have
custname                kf1
R                            300
S                           200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy

DSO data Load issue

Hi all,
i have some issue with DSO data load , while loading the data data comming to psa perfectly 238 ware comes, but when i trigger that DTP, i am getting only 6 records.
Please any one suggest me.
Thanks,
Gayatri.

Hi Gayatri,
if you have already loaded some data to DSO & now if you are trying to do Delta, it is possible that it is taking only Delta Data??
(or)
If you have any Start/End routines/Rule Routines written for deleting any records based on some conditions.
(or)
Also It depends on the keyfield you have selected in the DSO. If the keyfield which you have selected is having some repeated values, then while loading into DSO, it will be aggregated i.e if you have 10 rows for keyfield with value say 101, then in the DSO it will be loaded with only one row with value 101 (10 rows becoming 1 row) & with the keyfigure either Summation/Overwritten depending on what you have selected in the rule details for the keyfigure(you can check it by right click on Keyfigure mapping> Rule Details> here you can see whether it is Overwrite/Summation).
Also as mentioned in above posts you can check the DSO --> manage --> Check the number of rows transferred & number of rows added.
Hope it is clear & helpful!
Regards,
Pavan

0HR_PY_PP_2 - data load issue

We have 0HR_PY_PP_2 which pulls deltas weekly. On 29th of June the data load failed with error posting runs are locked, try the transfer again. So we did repeat delta. The load was successful but it got 0 records. But the R/3 guys said there was data. When the chain ran next week i.e. on 6th July, it got all the data including the data which was supposed to be brought in the previous weeks load. Did any one face such an issue. We do not understand what could be the problem.Can some one please help.
Thank you!

You should have run a normal delta run (no repeat delta) instead for
the following reason:
When you run the extractor in a situation when posting data is
still locked (by the actual posting process), the extractor stops
extraction immediately before it calculates any record and
puts it to the delta queue. However, a "repeat delta" run is a process,
that simply takes whatever it finds in the delta queue for the
specific extractor as the result of the last delta run, and resends
all these records to BW. It does not even invoke the application
specific extraction logic again. In this specific situation
this means, that 0 records are sent again and the timestamp is not
touched.
In other words, the correct procedure after a detection of a lock
of the posting data is to run a regular delta again when posting
has been finished."
regards,
Colin Moloney

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

EIS data load issue (04/24).

Similar Messages

Maybe you are looking for