EIS - Fact Tables, Drill Through Reports & User Defined SQL
I have built a model using two factables. (Virtually one table as the two are combined in the OLAP Model.) I then built my metaoutline and I have specified an ASO cube. I built the cube and the drill through reports and then tried to load the cube.
Intially the standard SQL generated no records. I tweeked it a bit and it then loaded. However, once I tweeked the SQL I could not get any drill through reports.
Does anyone know how the SQL for the drill through reports is populated? Does it run off the user defined SQL?
I've figured it out. FYI to those curious.
The SQL for the drill through reports are specified on how the model is set up. The User Defined SQL is only for the data load.
Similar Messages
-
Drill-Through reports in EIS 7.1.X
Hi,<BR><BR>We had some problem migrating to EIS 7.1 from 6.5.4. EIS seems to ignore all the dimension tables defined in the model whenever executing the drill-through reports, and only using fields in fact table in the "where" clause. The same report/"intersection points" works perfectly in 6.5.4.
<p>Hi,</p><p> </p><p>I am also facing few issues related to AIS:</p><p> </p><p>I am unable to use Drill Through</p><p> </p><p>(1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck</p><p> </p><p>(2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further</p><p> </p><p>Can anybody help me?</p>
-
Hi,
Working with Drill Through reports on essbase 9.3.1. I have defined 10 drill thru reports in EIS because of mulitple hierarchies in some dimensions that needed to be specified. I created 1 from scratch and then copied it and modified OLAP intersections as needed, typically it was just 1 dimension that I needed to delete and re-add using a different child.
Some simple drill thru retrievals are working just fine, while others are causing me to receive an error...
{ESSNET MESSAGE} Network error [10054]: Cannot Send Data
Why would some report retrievals work, and others get this message?
Any ideas?
TIA,
RobertNot a problem.. http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Remember, you have to reboot the machine(s) where you make changes for them to take effect.. If your EIS server is also Windows (and on a different server), do the same thing there.
We see this issue all the time with the Outline Extractor as it makes many, many requests to the Essbase server (and each one uses a port that is not released by Windows for some time).. In fact, I am currently writing some new caching functionality into our Dodeca-Essbase server and am putting a configurable delay into the code so the code doesn't call the server too quickly (but, of course, this is something that runs in the background, so performance isn't a huge issue in that case)..
Let us know if it fixes your issue.
Tim Tow
Applied OLAP, Inc -
Problem with EIS drill through reporting
Hello,<BR><BR>Please help me with this.<BR><BR>We are using Drill Through reports with EIS 7.1 and Essbase 7.1 in AIX environment. (These are the IBMDB2 Olap versions, not directly from Hyperion.) For some reports when retrieved on a member with more number of children, the Integration server gets killed and we get the following error<BR><BR>ESSDTU<BR>{ESSNET MESSAGE} Network error [10054]: Cannot Send Data<BR><BR>Following is the information in the server log file:<BR><BR>[Thu Jul 13 4:39:04 PM 2006] /IS/Listener/0/Informational/1051001/Build-EIS71B168<BR>Received client request Login<BR><BR>[Thu Jul 13 4:39:04 PM 2006] /IS/Coordinator/0/Informational/0/Build-EIS71B168<BR>Executed client request 'Login' in 0 seconds<BR><BR>[Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Initialization completed, 'Worker' service is online.<BR><BR>[Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Received client request Get Drill-Through report<BR><BR>[Thu Jul 13 4:39:04 PM 2006] /IS//0x0/1152826749/Informational/0/Build-EIS71B168<BR>Successfully loaded the OLAP Model 'OM1'<BR><BR>[Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051034/Build-EIS71B168<BR>EssbaseAPI: Logging in user [User1]<BR><BR>[Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051035/Build-EIS71B168<BR>EssbaseAPI: Last login on Thursday, July 13, 2006 4:24:33 PM<BR><BR>[Thu Jul 13 4:39:06 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Executed client request 'Get Drill-Through report' in 2 seconds<BR><BR>[Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Received client request Get Drill-Through report attributes<BR><BR>[Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Executed client request 'Get Drill-Through report attributes' in 0 seconds<BR><BR>[Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Received client request Get Drill-Through report data<BR><BR>[Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168<BR>Drill Through Report for Essbase Server:Server1.corp.com Application<img src="i/expressions/face-icon-small-happy.gif" border="0">T1 DB<img src="i/expressions/face-icon-small-happy.gif" border="0">B1 User:User1<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Unknown flag [JDBC DSN] found, ignoring it/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Found Q command line parameter and a value of 128 is set to it/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Setting configuration variable, server home, to 'c:\ibm\db2olap\is'/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Setting configuration variable, temporary directory, to 'C:\DOCUME~1\malkar\LOCALS~1\Temp'/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Setting configuration variable, log file name, to 'c:\ibm\db2olap\is\log\olapisvr.log'/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0<BR>Setting configuration variable, Essbase message database, to 'C:\ibm\db2olap\bin\essbase.mdb'/Build-EIS71B168<BR><BR>[Thu Jul 13 16:39:17 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168<BR>Invalid session identifier, please log in to Essbase Integration Services Server again.<BR><BR>[Thu Jul 13 16:39:28 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168<BR>Invalid session identifier, please log in to Essbase Integration Services Server again.<BR><BR><BR>Please let me know if this is something to do with the EIS limitations or some setting<BR>Thanks<BR>Kris
Normally if the drill through report fetches a wrong combination of members or huge amount of members than the way it was designed in the Drill through Report template. The database may fail due to improper query. Check the database and table status. Also fetch the report with proper combination of members.
-
EIS Drill through reports should be disabled at #MISSING data cell
Hi,
I have working on Oracle Essbase Integration server(EIS) 11.1.1.3. I have developed the 2 drill-through reports.
Every thing is working fine. Using smart view, users are able to access the drill-through report.
As an another requirement, if there is no data(#MISSING) for any member combination in Essbase, Drill through report should not be enabled for this combination in smartview at retrieve.
How can I handle this requirement? In OLAP Intersection levels, only dimensions’slevel/generation can be specified.
Please help me on this. It is very urgent for us. Quick help will be highly appreciated.
Thanks & Regards,
Mohit JainHi Gary,
I think its the latter. I've been asked on more thant one project to code things that prevent users from doing things that otherwise wouldn't make sense to do. Within the last year I was actually asked to configure things "as if I was providing functionality for 2 ^nd^ graders". At least, based on experience, this is how I relate to the OP's request.
I agree, its absolutely silly (and frustrating ) that users would try to drill through on a #missing cell and not see anything. What's worse, depending on where the drill through goes, and how its set up, users might drill on #Missing and actually see data! Yikes! Now in an experiential sense, the users can expect to see data where data ought not be.
So sometimes its just easier to just remove the button altogether than to have to explain when and why it can be used, and why when it's not used that way it did what it did. And users being part of the driver behind project requirements, don't want to hear "because you're not supposed to".
Hopefully the OP will clarify and we can provide what s/he's looking for.
regards,
Robb Salzmann -
EIS drill through reports in Analyzer
I'm having trouble pulling SQL drill through reports defined in EIS when using Analyzer. I can pull the report when I'm in Excel, but when I go into Analyzer and double click, I get the related content box to open, but no links to the drill through report.<BR><BR>I did some searching on the Hyperion support site and found an entry in the knowledge base that said the Grid API option had to be turned on for this functionality to work. Of course there was no mention of how to turn the Grid API on and I have not been successful in finding anything in the install guide or the admin guide.<BR><BR>I'm using Essbase 7.1.5 with EIS 7.1.2 and Analyzer 7.2.5.<BR><BR>Is anyone using Analyzer to successfully pull EIS drill through reports?<BR>Did you have to turn on the Grid API option?<BR>How is this feature turned on?<BR>Or, any other suggestions?<BR><BR>TIA
<p>Hi,</p><p> </p><p>I am also facing few issues related to AIS:</p><p> </p><p>I am unable to use Drill Through</p><p> </p><p>(1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck</p><p> </p><p>(2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further</p><p> </p><p>Can anybody help me?</p>
-
EIS drill through report build
Hi,<BR><BR>I want to create multiple drill through reports using EIS. But looks like I need to create all the required reports before I build and load the cube. Once I have built the cube using EIS, I cannot go in the metaoutline and add new drill through reports. Is this true, or am I missing something? <BR>So whenever I need to add new reports for drill through, do I need to build the cube all over again?<BR><BR>Thanks<BR>RMP
No, you can open your metaoutline and build your drill through report and then run an update that just refreshes the drill through reports without having to rebuild or reload the cube.
-
Drill through report with parameters that user can change
Hi Team,
Need to provide user the ability to select the parameters in drill through report.
But even after changing parameters to different values and click view reports.Its getting reset to the parameter that being passed from main report.
Is there any way we can override these parameter values in drill through reports so that It can also work as normal report.
Thanks!The user is interfacing with the main report so add the needed subreport parameters to both reports. In the main report, select the subreport > properties > Parameters. add the subreport parameters and set the value to the same parameter in the main
report by clicking expression builder (fx) and selecting the appropriate parameter.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek. -
Drill-Through Reports using EIS
Hello -
Is there a document to guide us through the steps to create drill-through/Hybrid Analysis reports using EIS 9.3.1? I couldn't find it in sysadmin or dataprep documents ..
Thank you!You can check in EIS document however producing drill through report is fairly straight forward. Select Tools -> Drill Through and then design SQL which you want to execute. I don;t have tool access so can;t give exact steps.
Let me know if you have any issues.
Thanks, -
*****EIS : Drill through Report Error while excel data retre
Dear All,
could you please help me in the below error . When i tried to get the drill through reports in excel add-in ,
i am getting the below error . When i had look into EIS log, its generating dynamic query for this drill through reports .
[NCR][ODBC Teradata][Teradata Database] Syntax error- expected something between the word '<<Databasename>>' and the word 'ai'.Unable to get catalog string.
Thanks in advance .
MYou are saying the dynamic query was generated, did you copy the query and tried to execute it in the database client. Check the SQl for any errors and also in the did you see any SQL errors?
-
EIS 6.5.1 Drill through Reports - Urgent
Hi all, Is there any limitaion on number of fields in the EIS drill through reports. It seems it accepts only 10 columns, rest of the column data is not properly displayed. Please update me on this.thanksSels
We ran into this problem a while ago. It seems that after 10 columns, formatting get really odd. We submited it as a bug a number of months ago.Glenn S.Narratus [email protected]
-
EIS 6.5.1 - Drill through report
Hi all,Is there any limitaion on number of fields in the EIS drill through reports. It seems it accepts only 10 columns, rest of the column data is not properly displayed.
We ran into this problem a while ago. It seems that after 10 columns, formatting get really odd. We submited it as a bug a number of months ago.Glenn S.Narratus [email protected]
-
Create drill through report in EIS
Hi
I am new in EIS
Could somebody guided me how can i create drill through report in EIS and how connect them to essbase spreadsheet ad-in
Thanks
Edited by: Softperson on 28/5/2010 17:55i found answer on my question by myself
-
EIS and Drill Through Report Video
Hello,
If you want to learn Essbase Integration Service and Drill through report features, here is the videos tutorial of 2 hours.
EIS & Drill through : http://www.box.net/shared/qlj6ba8gf3
Amit
learnhyperion.wordpress.comHi,
I could not play the movie. Which player is suitable to run the movie?
Thanks in advance -
Enable/Disable Drill-Through Reporting?
Hi,
We have a BSO app which has Drill-through reports (defined in EIS).
Reports are working fine.
Is there a way to disable/enable drill-through reporting on an App/DB using MAXL?
Appreciate your thoughts.
Thanks,
Ethan.Glenn,
Thank You for the response.
I am not exactly able to understand how this whole drill-through reporting concept works technically.
We define meta-outlines in EIS. Define Drill-through reports for Meta-outlines.
We build the cubes in Essbase using the EIS Meta-outlines.
Drill-through reports are available for these cubes from excel Add-in.
I am clear till now, now starts my confusion...........
I assume there will be a connection to EIS whenever user does a drill-through through Excel Add-in.
When I rename the Application in Essbase, I see drill-through reports are still available.
Are there any files/artifacts (like filters or scripts) on the Essbase app that correspond to drill-through reports?
Is there a way to tell if the app is created using EIS or not, just by looking at the app in EAS?
I believe I am asking the complete concept :).
Appreciate your response.
Thanks,
Ethan.
Maybe you are looking for
-
How to change setlinewidth on a given page?
We have our PostScript printer driver send a text file with some extra instructions. Among other things, this file establishes a custom "6 setlinewidth" mainly for fractional divider lines. The custom value is apparently reset to the default value of
-
Can we have a Signature in the Adobe Send? also can it remember our passed email recipients address like SendNow did?
-
Expand items on a material document
The system allows to post 100 items per material document and after that it create a new document. How can we have the system to allow more than 100 items per material document? Is there any configuration/developement?
-
How do you install photoshop elements 8 on a macbook air?
I bought a bamboo capture that come with bundle softare including photoshop elements 8. Is there any way I can donload the driver for the program online?
-
Imessage stops working on iPhone but works on iPad
Hi there! My imessage will be working perfectly fine on my iPad and iPhone and then suddenly it will stop working on my iPhone but work on the iPad. Over tried restarting my iPhone and the internet connection is fine as all other apps work fine on th