EIS outline load with error 1130203

Hi, All
Help me please with this trouble:
We use Essbase Integration Services 9.3.1 , data source is Oracle DB. One of the base dimension include about 1000000 members , and on this base dimension we need to use 15 attribute dimension. When I try to load outline, always have error “Analytic Services Error Number 1130203.Failed to save outline” But if I decrease number of source member to about 600000 – all right, cube is loaded. All recommendation which I find in document “Essbase error messages references” are checked and all source data is correct.
OS – Windows 2003 SE
RAM – 3 GB
Thanks

If you wish to compact/restructure the outline, you could refer the Thread: Can't update and save the ASO outline because of error 1130203
GlennS has suggested to compact the outline,
Go into EAS and right click on the outline and select compact. I think it really only started to work properly in 9.3.1.2
I have suggested the way to resize the outline in the same thread, just see if it helps.
1..Create an new application and database xx and add the Dimensions. Lets consider the Outline size to be 736KB (xx.otl)(This is considered to be template outline.)
2.Take the back up of the Template outline.
3.Run the application.
4.During the first refresh,the outline size will be minimum, say 180 MB (xx.otl)
5.During next refresh the outline size will increase to 350 MB. In order to avoid this increase in outline size, we have to stop the application and replace the current Outline file with Template Outline before refreshing.
6.Start the Application. Now the Outline size is only 736KB
7. After the cube refresh, the outline size become 180 MB.
8.Follow the same procedure for further refresh , then Outline file size will not exceed 180 MB.

Similar Messages

Data Load Transaction Aborted With Error [1130203]

I can't to load data by using rule file . How can I fixthis problem? it shown error message "Data Load TransactionAborted With Error [1130203]".My Essbase is ver 7.0.0.

Don't have that message. Have you lookedin the Application log to see if there is any more information - this is the best place to start. Is the file that you are trying to load the same format as previous files loaded - has anything changed ? maybe you need to open the load rue, and then open the file to see if teh data lines up with the expected format and setup of the load rule .

Get message "loaded with errors on the target and was closed" but there are no errors in the vi.

Hi,
Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed"
The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
Any guidance to find the issue would be greatly appreciated!
Thanks,
Conor
Attachments:
Labview error.JPG ‏43 KB

Some tips:
1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
3. Try to recompile top-level VI and its dependencies. Deploy.
4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
5. Close the project. Restart RIO. Open project. Deploy.
6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
7. Take another computer. Deploy from it.
8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
10. Contact NI Support. Send them your project. Make them Deploy it.
The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps.

Page opening hangs ,and loads with errors

page opening hangs ,and loads with errors,
terry.

Terry,
You need to be much more descriptive when posting. We have no idea what "page" you are referring to.

.vi loaded with errors on the target and was closed

When I intend to run my RT (communicating with an FPGA on a cRIO) it only runs one time. The second trial leads to the following error:
NI_AALBase.lvlibine Wave.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library lvanlys.*ineWaveCIN:C on RT target device.
After reseting the FPGA and Labview it runs again, but also only for one time.
Thanks for solutions!
Thomas Vogl

Error 'found'.
Process (one day working on it!):
1- 'Disabled' .vi cutting it into small pieces.
2- Locate code that provokes 'not defined error' by enabling and running.
3- Finally located.
My case:
I've designed a communication system. To send data uses a PDU containing a 'variant' and 'ring'. This ring indicates type of data to convert variant with necessary typedef. The system defines 4 default msgs on ring (NULL, ACK, NACK, PING).
The receptor works well, but as I have a lot of data types, I need a case structure. (rings do not work with case at least on 2011) Then I do next thing:
Explicit cast to a typedef enum with all my data values... (This system is designed for our purposes and could not be the better solution)
... UNDEFINED ERROR ON PXI ...
Solution:
Instead using explicit typecast use "coercion dot" casting. Like here.
I receive an U16 data that PXI cast to my enum on 'data out' indicator (you can't see coercion dot because pink and red are 'very different' colors)
No more errors.
Conclusions:
Labview has issues working with explicit type-casting to enums. I can't work more on it, but is necessary to debug this kind of issues because can affect projects at last steps of the development and drives LVdevelopers crazy.
The only think I do with the enumeration is to add new element and all the system fails...
Thank you for your reply Schmitz!
I hope that this information could help somebody that in the future needs to investigate how LV works... xD
Probably this is not the only issue related with ".vi loaded with errors on the target" (known as the "well defined error").
Cheers

NeeBeans - Form loaded with errors

Using NetBeans 6.00 Windows.
I created a form class extending JPanel and inserted the class in Palette.
public class ObjPrivUser extends javax.swing.JPanel Then, I created a second class extending JPanel, including the first class.
public class GrantsByUser extends javax.swing.JPanel {
private void initComponents() {
objectPrivUser = new ObjPrivUser(db);
private GUI.Panels.ObjPrivUser objectPrivUser;
...Everything was ok, when I open the second class I can visualize all components. Until yesterday, when I opened the class and receive a message "form loaded with errors".
I recreated both classes, but today the same error has occurred.
Any sugestion?
Xks,
Fornari

Recompile from your source, something is not nice in your file.

Outline Load Utility error using Hyperion Planning 11.1.2

I am using Outline Load Utility to extract outline from Hyperion Planningin .csv format.
We have three planning cubes and I am trying to extract a dimension that is only a standard dimension in the third cube. However, I get this error message:
Error: Unable to obtain dimension information and/or perform a data load: com.hyperion.planning.sql.HspMember cannot be cast to com.hyperion.planning.sql.HspTimePeriod
When I check Shared Services, the dimension is not part of standard dimensions in Global Artifacts for the app. I can see it under the specific Plan Type as a standard dimension.
When I try to extract any of the dimensions under the Global Artifacts, the command is successful. Here is the syntax I type for outline load command:
OutlineLoad /A:HFPlan2 /U:admin /-M /E:c:/position_export.csv /D:Position /L:c:/outlineLoad.log /X:c:/outlineLoad.exc
Please advise if I need to add something else to the command or totally use any other tool.
Thanks!

Log an SR with Oracle, because that is a varchar field with I think 2000 char limit.
Is that happening for just that application (do you have other apps, or can you create a sample application)
Regards
Celvin

Loading Data Using Outline Load Utility - Error

Trying to load some data using Outline Load Utility. I followed the Oracle documentation on this and Under the Administration -> Manage Data Load area I defined Accounts as data load dimension, and period as driver dimension. I then added Jan - Feb as driver members. I wanted to load data for Jan. My data header looks like this:
Accounts,Jan,Point-of-View,Data Load Cube Name
acct1, 768, "2010, Ver1, Actuals, entity1, etc" Plan1
The command i typed is this:
C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1>outlineload /A:Plan1 /U:Admin /M /I:C:\MockData2.txt /D:Accounts /L:C:\dataload.log /X:c:\dataload.exc
I get the following errors:
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Jan".
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Point-of-View".
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Data Load Cube Name".
[Mon Nov 22 11:03:02 CST 2010]Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
[Mon Nov 22 11:03:02 CST 2010]Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
This is version 11.1.2. What am I doing wrong here? I also find it interesting that the command for data load and metadata load is the same as per oracle docs. I guess Planning knows if we're trying to load data or metadata based on the CSV file header?

I don't usually bother with loading data using the outline load utility but as a test on 11.1.2 using the planning sample application I gave it a quick go.
In planning, went to Administration > Data Load Settings > Picked Account as the data load dimension, Period as the driver dimension and selected Jan as a member
I created a file :-
Account,Jan,Point-of-View,Data Load Cube Name
TestMember,100,"Local,E05,Actual,NoSegment,Working,FY11",Consol
And used the following command line from the directory with the planning utilities
OutlineLoad /A:plansamp /U:admin /M /N /I:F:/temp/dload.csv /D:Account /L:F:/temp/outlineLoad.log /X:F:/temp/outlineLoad.exc
The log produced :-
[Tue Nov 23 10:02:01 GMT 2010]Successfully located and opened input file "F:\temp\dload.csv".
[Tue Nov 23 10:02:01 GMT 2010]Header record fields: Account, Jan, Point-of-View, Data Load Cube Name
[Tue Nov 23 10:02:01 GMT 2010]Located and using "Account" dimension for loading data in "plansamp" application.
[Tue Nov 23 10:02:01 GMT 2010]Load dimension "Account" has been unlocked successfully.
[Tue Nov 23 10:02:01 GMT 2010]A cube refresh operation will not be performed.
[Tue Nov 23 10:02:01 GMT 2010]Create security filters operation will not be performed.
[Tue Nov 23 10:02:01 GMT 2010]Examine the Essbase log files for status if Essbase data was loaded.
[Tue Nov 23 10:02:01 GMT 2010]Planning Outline load process finished (with no data load as specified (/N)). 1 data record was read, 1 data record was processed, 1 was accepted, 0 were rejected.
There you go no problems.
Cheers
John
http://john-goodwin.blogspot.com/

Hierarchy from flat file loading with errors - duplicate node names

Hello experts,
I am loading a product hierarchy from a flat file into a custom hierarchy
object. The issue is that it errors out saying I am loading
duplicates within nodes, however all node IDs within a level are unique.
It seems to be looking at the node name to determine uniqueness and I know
we have some duplication within the text there especially when you factor
in the 32 character limitation for the node name. Does anyone have an idea
as to whether it is possible to have it only consider the node ID instead
of the node name to determine uniqueness?
A colleague suggested using the link ID to fix this problem but I don't know how that field works or how to populate it.
I'm working in a BI 7.0 environment (I don't know if that makes a difference since you still have to use the 3.x objects to extract the hierarchy).
Any help would be appreciated.
Nancy

Hi Nancy,
You may wish to check this OSS Note 1026749 - Hierarchies: Consistency check for duplicate nodes and 912115 (old one)
Symptom -
When you load or activate a hierarchy it terminates with error message RH 109 or RH 211. The hierarchy contains duplicate nodes and this is not allowed. The long texts of messages RH 109 or RH 211 do not describe the reason for the problem sufficiently or they are partially incorrect.
There is uncertainty about in which cases duplicate nodes exist in a hierarchy and in which cases duplicate nodes are allowed.
Hope this helps,
Bye...
Naga Timmaraju

Safari extremely slow and pages load with errors

Not sure if this is related to other Safari posts, but when I try to load a page from many sites, including this one, the speed is extremely slow and there are invariably errors reported on the bottom status bar. I'm on a new Mac Pro, and I haven't added any add-ons to Safari or changed system settings. My internet connection is DSL on ethernet, and there are no problems with email or on my old G4 using Explorer 5.1. At this point G4's Explorer is light years faster than Safari on this machine. I'm going to try Mozilla Firefox, but is there any hope for Safari?
Thanks,
Peggy

Hi Peggy
Welcome to Apple Discussions
Try this to speed up Safari.
First, make sure you are not using Rosetta. Go to Safari's info panel (Application folder>Safari.app>Single click>Apple Key I). If Rosetta is selected, uncheck it.
Network Connection
Go to the System Preferences>Network panel
- Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
- Next, click on the "Show" drop down menu and select Network Port Configurations. Only Ethernet ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
- Back to the "Show" menu, depending on your connection select "Ethernet". Click on the TCP panel. There, enter 4.2.2.1 and 4.2.2.2 (separate lines) in the DNS servers box and select "apply".
Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations.
In the Finder, go to your Utilities folder and select "Terminal". Once the screen is open enter lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
Post back

Images won't load or they load with errors.

I bought a new pc a couple of weeks ago, since then images won't load properly or simply won't load. Most of the time it happens with images hosted on imgur.com but happened a couple of times with other hosts too.
It seems to be a Firefox problem, because images are well displayed on Chrome & IE. Also it's odd because sometimes I cannot see an image, but if I try a few hours later I can view them perfectly.
A few examples, the originals and how I see them:
<pre>
http://i.imgur.com/fgxY56P.jpg
http://i.imgur.com/5r5ELRN.png
http://i.imgur.com/JWsLLTu.jpg
http://i.imgur.com/b8FNb1N.png
http://i.imgur.com/SIIfgVc.jpg
http://i.imgur.com/wo2FbUT.png
http://imgur.com/gallery/3ULJn
http://i.imgur.com/e3pta66.gif</pre>
I tried disabling all addons, but I still got errors. I'm using Firefox 28.0 on Win7 Ultimate SP1 x64.
Excuse my poor english and thanks in advance.

Resetting Firefox seemed to be the only solution, worked fine.
Thanks for your help Aman : )

Apache2 Loads With Errors

I have a new install of SLES10sp2 OES2SP1.
I was able to unload and load Apache2 yesterday.
Today I receive the following error when I run the command rcapache2 start:
httpd2-worker: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 27 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib/apache2-worker/mod_proxy_connect.so into server: /usr/lib/apache2-worker/mod_proxy_connect.so: undefined symbol: ap_proxyerror
I have looked at both of these files. There does not appear to be any syntax errors. Also all modules are in the /usr/lib/apache2-worker directory.
I am able to get to NRM on port 8008 and 8009 and the DHost HTTP Server on port 8030.
I have not patched anything. However our backup team did install Data Protector.
Is this fixable or should I just reinstall Apache.

Originally Posted by kbannister
I have a new install of SLES10sp2 OES2SP1.
I was able to unload and load Apache2 yesterday.
Today I receive the following error when I run the command rcapache2 start:
httpd2-worker: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 27 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib/apache2-worker/mod_proxy_connect.so into server: /usr/lib/apache2-worker/mod_proxy_connect.so: undefined symbol: ap_proxyerror
I have looked at both of these files. There does not appear to be any syntax errors. Also all modules are in the /usr/lib/apache2-worker directory.
I am able to get to NRM on port 8008 and 8009 and the DHost HTTP Server on port 8030.
I have not patched anything. However our backup team did install Data Protector.
Is this fixable or should I just reinstall Apache.
check the modules you are loading. With apache2.2 there are some modules that have to be loaded before others. Had the same problem try adding basic proxy first (not sure the exact module name) and if that still doesn't work add proxy_balance.
Hope that helps.

Won't load with error 2738

iTunes will not update because of error 2738. It also said something about quicktime not updating or loading either. I am about to recieve and iPhone and it will not sync with my version of iTunes, so I need help!
Windows Vista Windows Vista

same problem. tries to install, gives the same error code (with no explanation) for both quicktime and 7.3. then takes me back to the install prompt after telling me the install could not be completed. I have Vista Home Premium, which I knew had issues with some software, but this is ridiculous. Apple even made me create a whole profile just to get into these discussions and get help so I could use my shiney new iPod I got for a gift. great customer service. thanks, Apple, for your wonderful systems.

Logic Pro 9 will not load with error message MINOR PROBLEM IN DATA (3)

Logic 9 will not load for me. I am using version 9.3 and have not changed anything on my setup.
It just crashes and will not repair issue. Any help would be appreciated.

How is this drive formatted? What's on it? How are you opening Logic: by doubleclicking the app or by doubleclicking a project? What project was it supposed to open? have you tried starting Logic by doubleclicking a different project?

IMAQ setup pattern matching 2 loaded with errors on the target and was closed

Hi , guys. has any of you nice people ever seen something like that ... in deployment progress?
labview 2010
sbRIO -9631
Thanks in advance.
Attachments:
deployment progress.jpg ‏43 KB

Hi, Oli
thanks for your help. I re-installed the IMAQ software, it seems working.
but i have some similar errors now, and i dont know which module i should re-install, could you tell me where the problem is, please.
the name of which module would be great.
thanks a lot.
Attachments:
0.jpg ‏55 KB
1.jpg ‏52 KB
2.jpg ‏52 KB

EIS outline load with error 1130203

Similar Messages

Maybe you are looking for