EIT Changes after it has been registered

Hi,
I have a case where a Person EIT has been registered as single row. Now, the client wants to convert this to a multiple row EIT .
Is there any standard/recommended way of modifying the registration details of an EIT once it has been registered?
I was hoping to avoid a direct update to per_people_info_types table or creating a brand new person eit segment to replace the existing one..
Regards,
Abhijeet

I dont think there is any API / process available. You need to directly update the table per_people_info_types directly.

Similar Messages

  • How to forbid any further changes for PO (QTY and price ) after it has been

    Hi,
    How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

    Hi,
    Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
    But quantity can be changed at any time.
    So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
    Ramesh

  • How to settle the expenses after AUC has been capitalised.

    Hi All,
    I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
    I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
    Can you tell me how to create a new settlement rule in this case. It is Urgent
    Regards
    VK

    Hi Vijay,
    This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
    Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
    You can then settle using CJ8G or CJ88 but CJ88 is a better option.
    I think, I have answered the same query.
    Regards
    Bharat

  • AVReceive2 gives error:  No format has been registered for RTP Payload type

    Hello,
    I am using the AVReceive2 program (http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVReceive.html#requirements) as posted to hopefully play back RTP in real time. I have it set to receive a known good RTP stream and I receive the following error:
    No format has been registered for RTP Payload type 8
    I have seen posts for a similar error but it seemed to be in the context of an A-law add on which am I not doing. Am I missing a plug-in or modification to the code?
    thanks in advance,
    Erich

    Hi Erich,
    I have the same problem when I using AVReceive2.java .Could yuo describe your solution in order to solve the issue?
    In order to create the RTP stream I used VLC and is impossible to change the encapsulation method and then the payload type .
    What kind of streaming server are yuo used?
    My e-mail address is [email protected]
    If you can , please write me your proceeding in order to solve the problem.
    Thank you

  • After password has been reset how do I reset keychain?

    After password has been reset how do I reset keychain?

    That article is a great help if you remember your OLD login password.
    If not, the bad news is in this article:
    OS X: Keychain Access asks for keychain "login" after changing login password
    read it carefully, It explains how to change your keychain by using the OLD password.
    If you don't remember your original (former) account password
    If you don't remember your original password, you'll need to delete the keychain. Deleting a keychain also deletes all the password data saved in that keychain.
    If this applies, it means is that your old saved passwords are lost.
    You will have to start collecting them anew and adding them to the new keychain. Use Web mail and log in to your email with a Browser. Get them to send you your old password or reset it, then record the new one in Mail Preferences, and it will be saved in the current login keychain.
    You will have to do a similar exercise with your other saved passwords.

  • I got the message "Your handheld has been registered with the wireless network" from blackberry?

    So I got my curve 9360 about 3 months ago and last night I got a message from blackberry saying "Your handheld has been registered with the wireless network". I don't have a data plan but after I got this message I was able to go on the internet without wifi.. I thought it was extremely weird and I was scared my carrier, Rogers, will charge me so I turned my data off. I asked my dad today and he said I could use it and we won't pay if they charge me.. I'm still really worried that I'll get a ridicous bill at the end of the month. So why did I randomly get data and will it charge me? What should I do? 

    I've heard through the Rogers support forums that Rogers is offering a free data trial to its users.  I haven't seen anything official yet, but I've heard that on atleast two occasions so far.
    For that reason, I would go ahead and enjoy your free data while it lasts.  If you're really worried about it, call Rogers to confirm it.  Just remember, you never signed a data plan agreement with them so they can't charge you for it.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

    Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. If "Set Cursor.vi" is replaced with "Set Busy.vi" the same error occurs.Is there a workaround for this problem other that setting the cursor image manually in user32.dll? I must be able to open more than 30 panels and set them all to busy. In the test case I used a single VI, simply to demonstrate the error.
    Message Edited by Jerred on 05-04-2007 10:06 AM
    Attachments:
    LabVIEW_Cursor_TestCase.vi ‏68 KB
    SimpleVI.vi ‏13 KB

    This bug is fixed in LabVIEW 8.0 and later.  Unfortunately, I know of no workaround in LabVIEW 7.x.  When I encountered this bug in one of my UIs in LabVIEW 7.x, my "fix" was simply to ignore the error outputs from the cursor VIs, and to live with the fact that I had no custom cursors after 30 windows had been opened.
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • How do i get back my stateful session bean after it has been passivated

    hi ,
    How do i get back my stateful session bean after it has been passivated by container.
    i'm confused that is it possible or not .......give me answer
    i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
    now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
    java.rmi.NoSuchObjectException: no such object in table
    java.rmi.NoSuchObjectException: no such object in table
         at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
         at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
         at sun.rmi.server.UnicastRef.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
         at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
         at $Proxy1.makeNewAcc(Unknown Source)
         at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

    Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
    Chuck

  • Serial number has been registered before!

    I bought a new macbook pro and was trying to register the product online. it is a sucsessful registration on the product. However when i try to update the MAC OS X to Lion, it cannot be updated and request to use the up-to-date program to submit some of the information.
    I did submit twice on the up-to-date program. Cause the first email was reflected that the attached receipt was illegible. Hence, i upload another with a more high and clear pixel jpg. by right it should be clear enough. It still doesn't work out.
    I call up to apple support to ask. With the Serial number check, found out that my serial number has been registered before with another person name, and is not under my name. moreover that the purchase date is on April 2011. Which cause my warranty to be expired on the April 2012.
    I very doubt that my macbook pro is not new. Or been used before and return to the store.
    DId anyone experience that same problem?

    If the item is brand new out of the box then it may just simply be someone accidentally registered their system serial with yours by spelling mistake (S instead of 5, B instead of 8, etc..)
    Best way to resolve this is just call AppleCare and provide them with your proof of purchase and the serial number, I'm sure they can sort it out if you get to the right department.
    Link:
    http://www.apple.com/support/contact/

  • After Firefox has been running a while, every link opens a new window

    After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
    This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
    I have no add-ons installed in Firefox.
    My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
    I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

    If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
    And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

  • HT201653 We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    Since the only thing needed in that box is the small piece of paper with the (very long) registration code on it (usually found inside the booklet), see if that is actually there and, if it is, call Apple at 800-275-2273 and ask to be transferred to the Applecare department. Here is the link to the Applecare plan - just in case you may need it, see the fax numbers listed under para. 9 (Cancellation).
    http://www.apple.com/legal/sales-support/applecare/appmacnaen.html

  • Tiles- Cannot forward after response has been committed Error

    I am trying to use following approach for my tiles implementation but i am getting error like
    java.lang.IllegalStateException: Cannot forward after response has been committed.
    I have gone thorugh the other posts regarding the same error but not helping me.
    Any clues greatly appreciated.
    Thanks,
    Sachin
    "I haven't found a way to directly dispatch to a tiles definition, but you can eliminate the need for multiple "wrapper" JSPs by creating a single "tilesDispatch" JSP that is able to dispatch to different tiles definitions, and establishing a convention for mapping URLs to that JSP, and identifying the tiles definition you want to load.
    For example, you could use the following convention to identify a tiles definition:
    /tiles/defName
    where "defName" is the name of the tiles definition (from tiles.xml) that you want to use. The code for the tilesDispatch.jsp would be as follows:
    <%@ page contentType="text/html;charset=UTF-8" language="java" %>
    <%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
    <%
    String tilePath = request.getRequestURI();
    int slashIndex = tilePath.lastIndexOf('/');
    if (slashIndex >= 0) {
    tilePath = tilePath.substring(slashIndex+1);
    %>
    <t:insert definition="<%=tilePath%>" flush="false"/>
    The scriptlet code takes the request URL (e.g. /tiles/defName), strips off everything up to and including the final slash (e.g. defName), then the tiles "t:insert" tag is used to look up and insert the corresponding tiles definition.
    In order to map all URLs of the form /tiles/* to the tilesDispatch.jsp, you would need to add the following to your web.xml:
    <servlet>
    <servlet-name>tilesDispatch</servlet-name>
    <jsp-file>tilesDispatch.jsp</jsp-file>
    </servlet>
    <servlet-mapping>
    <servlet-name>tilesDispatch</servlet-name>
    <url-pattern>/tiles/*</url-pattern>
    </servlet-mapping>
    Note: You may need to insert a slash before tilesDispatch.jsp in the <jsp-file> element. I am using pre-compiled JSPs, so my configuration is a little different. So if <jsp-file>tilesDispatch.jsp</jsp-file> doesn't work, try <jsp-file>/tilesDispatch.jsp</jsp-file>.
    Once you have this set up, you can refer to tiles definitions using the /tiles/defName convention in your faces-config.xml. For example, if you have two tiles definitions in your tiles.xml file: tile1 and tile2, you could have something like the following in faces-config.xml:
    <navigation-rule>
    <from-view-id>/tiles/tile1</from-view-id>
    <navigation-case>
    <from-outcome>success</from-outcome>
    <to-view-id>/tiles/tile2</to-view-id>
    </navigation-case>
    </navigation-rule>
    Note that when I have used this convention, I also have used the prefix mapping for JSF. That is, when linking to a JSF page, based on a tiles definition, from a non-JSF page, the URL would be as follows:
    /faces/tiles/defName
    In this case, the Faces servlet is initially invoked, which sets up the JSF environment. Then the /faces prefix is stripped off, and the remaining URL (/tiles/defName) is routed to the tilesDispatch.jsp, which strips off the /tiles/ prefix, and inserts the "defName" definition.
    We are currently using this approach in a number of web apps, and it is working very reliably. I hope this helps.

    Hi gimbal2,
    I hope to better explain.
    In my JSF code I have the next:
    <html xmlns="http://www.w3.org/1999/xhtml"
    xmlns:ui="http://java.sun.com/jsf/facelets"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:rich="http://richfaces.org/rich"
    xmlns:a4j="http://richfaces.org/a4j"
    xmlns:fn="http://java.sun.com/jsp/jstl/functions">
         <h:body>
              <ui:composition template="/template.xhtml">
                   <ui:define name="page">
                        <h:head>
                             <h:outputStylesheet ...
                        </h:head>
                        <h:form id="form1">
                             <rich:dataTable      id="table"
                                            value="#{listBeanRequest.elements}"
                                            var="element">
         </h:body>
    </html>
    In the listBeanRequest class, the method getElements() has a line, Integer h = Integer.valueOf("a");, which efforts the java.lang.NumberFormatException
    An in my web.xml I have:
    <filter>
         <filter-name>SecurityFilter</filter-name>
         <filter-class>my.filter.SecurityFilter</filter-class>
    </filter>
    I'm using JSF 1.2 running on Apache Tomcat 6

  • Workflow Shows as 'In Progress' after Workflow has been completed.

    Hello All,
    I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
    so on. The users that the item must be approved by are set when the item is submitted initially.
    Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
    My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
    under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
    Thank you to anyone who is able to help me with this,
    James

    Hi,
    According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
    To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
    Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
    To see the running workflow, you need to select an item, right click the title, and then select the workflow.
    However, each workflow enstance can only start once on an item.  In other word, you can not start the same workflow again untill the previous one is completed.
    As you said, workflow shows as 'In Progress'.
    Please make sure all the users have approved the tasks.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    You have to restore the iPad in order to unlock it using these instructions.
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

  • HT1212 how to enable my iphone after it has been disenabled?

    How to enable my iphone after it has been disabled?

    You have to restore the iPad in order to unlock it using these instructions.
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

Maybe you are looking for