"Either 10 sec with no data" or "Insufficient bandwidth"

Have been trying for past two weeks since I got this computer to successfully video iChat with someone. I live in Orange County, New York (ISP Cable - Road Runner) and my family lives in Tacoma, WA. They have the identical system I have - they have cable as well with Comcast. I talked them through all measures I have taken with my system. I have opened up all needed ports on my NETGEAR WGR614v2 router using port forwarding, set the QuickTime streaming speed to 1 Mbps and checked for updates. I checked my speed and get from 2000-4000 down and 300-500 up. I have had no success with my family or others available for testing such as [email protected] What else can I do?

Jay, good to hear it's sorted. Perhaps something in the router needed a jolt - routing tables somewhat end up corrupt, causing issues such as the one you suffered.
..k

Similar Messages

Insufficient bandwidth through airport.

Hi, I'm trying to set my folks up with iChat on their iMac G5. The ethernet connector is loose and unreliable. Rather than pay to fix it, they're using airport through the wireless router to the cable modem. If you connect via a cable (and hold it just right) I can audio chat fine. But if you try to audio chat with airport, I get insufficient bandwidth. What could be different?
Thanks for any suggestions...
Steve

There could be a problem with the wireless connection in terms of signal strength, or there could be a problem with the wireless function on either the router or on the iMac G5.
Test the signal strength by making the wireless connection from point-blank range. If that's not the problem, try another Mac computer with a wireless connection or try another wireless router.

Insufficient Bandwidth when trying for video/audio chat?

When my Dad is away, I like to talk to him on iChat.
When my Dad tries to invite me to a video/audio chat, it comes up with a message, saying: insufficient bandwidth to run this conference.
I have tried altering the bandwidth on Preferences, but it doesn't seem to work!?!?!
Any answers to my question?
Thanks.

What is your actual Internet Speed Up and Down ?
http://www.speedtest.net/
Other sites http://www.ralphjohns.co.uk/page5.html#_speedtests
Thanks to Defcom for finding them
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
8:39 PM Friday; July 4, 2008

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

Excel Workbook with Excel Data Model stored on SharePoint - daily refresh

I'm not sure if this is exactly the right forum but I'm hoping that someone here can either answer or point me in the right direction.
I have an Excel Workbook with an Excel Data Model.
The Excel Data Model uses SQL to contact our data warehouse and pull through data into tables.
We are storing the Workbook on a SharePoint site and viewing it using Excel Services.
The data in our data warehouse is updated daily and so I would like to refresh the workbook daily and remove the option to refresh the data in the browser.
Is this possible with a workbook that has an Excel Data Model (I've seen lots of posts that relate to workbooks with connections to tabular models).
Thanks
Paul

Hi Paul,
I have answered this issue in this thread that you posted in SQL Server PowerPivot for SharePoint forum, please see:
http://social.msdn.microsoft.com/Forums/en-US/9627939c-e9f1-48ae-a6ed-0c238d8f2d69/excel-workbook-with-excel-data-model-stored-on-sharepoint-daily-refresh?forum=sqlkjpowerpointforsharepoint
Furthermore, this issue is more related to PowerPivot for SharePoint. If you have any more questions about PowerPivot for SharePoint, I would sugget you open a new thread in the forum below for better support:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlkjpowerpointforsharepoint
Thanks for your understanding.
Regards,
Elvis Long
TechNet Community Support

Why does my phone use data with cellular data turned off?

I have problems with my iPhone 5 using data on its own. It usually happens at night, with all the apps closed and plugged in to charge (should be connected to my wifi). Recently, I started turning off my cellular data any time I'm at home out of desperation to save my data. Last night, my phone used 6MB of data with my data off, plugged in. I use My Data Manager to track, it matches up with AT&T's record of my data usage, so I'm pretty sure the app is not wrong. I have the 200MB plan, so I have to be very careful and it's incredibly frustrating to wake up and find 6MB gone when cellular data was turned off. Does anyone know what's going on? I haven't bothered calling Apple or AT&T, I never get anywhere with either one.

I'm not familiar with My Data Manager but from the name I would think it would tell you what app or apps have used the data and that might help narrow down the problem. If it doesn't have that information, you can go to Settings > Cellular > Use Cellular Data For and that shows usage by each app and if you click on System Services in that list it will also give details of that usage. The numbers are since you last reset the statistics (bottom of that screen). With a little time and detective work you may be able to identify the cause.
Also, there have been many discussions on various internet forums of AT&T (and other) reporting of the time of data usage not matching the actual time of the use. The usage numbers over a number of days for example are accurate but usage reported at 2AM may actually be a summary of some types of use that happened the previous day.

Problem with Runtime Workbench and with sending data from XI to SLD

Hello 
 
Could I have a little help, a hint in the two following topics: 
 
1. I run Runtime Workbench -> Component Monitoring -> Display All and I get this error: 
 
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
 
In filesystem log I can find like this: 
 
XIRWB.com.sap.aii.mdt.frames.jsp_error [SAPEngine_Application_Thread[impl:3]_40] Fatal: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
Thrown: 
MESSAGE ID: com.sap.aii.rwb.agent.server.rb_LCRAgent.landscapeCommunicationError 
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access
 at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117) 
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
Root cause: 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
 at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
 at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:280)
 at com.sap.lcr.api.cimclient.CIMOMClient.performBatchOperation(CIMOMClient.java:1251)
 at com.sap.lcr.api.cimclient.CIMClient.performBatchOperation(CIMClient.java:2268)
 at com.sap.aii.utilxi.sld.MRSldProxy.stage1(MRSldProxy.java:989)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadComponents(MRSldProxy.java:918)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadSld(MRSldProxy.java:907)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:373)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:434)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:764)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117)
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
 
 
 
I don't know what is wrong. 
I have configured: 
- SLDCHECK work properly, 
- none of the users PI* type not lock, 
- password to the PI* users in exchangeProfile entered correctly, 
- In VA in the JCo RFC Provider I have properly configure: AI_RUNTIME_JCOSERVER, LCRSAPRFC, SAPSLDAPI_SID - from the ABAP I can connect to this programs ID 
- In VA in SLD Data Supplier I have properly configure bookmarks HTTP Settings and CIM Client Generation Settings. CIMClient Test is OK 
 
I do not know what else I can see, what else I have properly configured ... I looked at the notes:: 936093 jak i 721548... 
 
 
2. I can't send data from XI to SLD, ie makes me a system definition in Web As Abap and Web as Java but nothing appear to me in Exchange Infrastructure. Exchange Infrastructure is empty - what is wrong?? 
I carried out the recommendation by 764176 and 1031321 notes 
 
I restart below applications (no effect)... 
com.sap.xi.directory (Integration Builder/Configuration) 
com.sap.aii.af.app (Adapter Engine) 
com.sap.xi.rwb (Runtime Workbench) 
com.sap.xi.repository (Integration Builder/Design) 
 
Can I ask for help and guidance in these topics? 
 
Regards 
RP 

I increased logging in the NWA (Configuration -> Log Configuration) - and increased the some things here to log ALL. So that from the NWA (Monitoring -> Logs and Traces) I see a little more information (but does not follow that with which the user is a problem). 
 
Here are some interesting logs ... 
I was most rash or irritation of those that say about the lack of credentials u2013 I must use Viusal Administrator and set good service ... 
 
What do I have done: 
In the Visual Administrator -> Cluster -> Server -> Services -> SLD Data Supplier 
I have set in the HTTP Settings tab the host and port SLD, the user name and password is also entered as it is in the SLD. To be sure, already have set for the user entered here such roles as: 
SAP_SLD_ADMINISTRATOR 
SAP_SLD_CONFIGURATOR 
SAP_SLD_DEVELOPER 
SAP_SLD_GUEST 
SAP_SLD_ORGANIZER 
Maybe we are talking in this place about a different user? 
 
Similarly, when it comes to tab CIM Client Generation Settings - here's all the same thing done. CIMClient test shows that everything is OK. 
When I click the button: This trigger the transfer of data to the SLD gets the message that everything was shipped correctly. Indeed, I received an instance of JAVA in SLD 
Also clicked on this icon: Assign application roles to user group - got information that everything is attached properly. 
 
By ABAP side, the connections: INTEGRATION_DIRECTORY_HMI, SAPSLDAPI, LCRSAPRFC, AI_RUNTIME_JCOSERVER and AI_DIRECTORY_JCOSERVER work correctly, ie I can perform the test - which means that programs ID are properly positioned in JCO Provider in VA. 
 
Puzzling is this message: 
The SLD data is inconsistent. 
 
Strange also that the message (from the ABAP everything is available in SMGW no errors): 
Connect to SAP gateway failed 
 
And what is this error: 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
 
Below is a list of some interesting logs ... 
 
########### 
 
Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'. 
 
############# 
 
SLD is not accessible. Check SLD Data Supplier service settings. 
 
########### 
 
"Warning","2012-02-22","07:53:50:986","Data get on com.sap.sldserv.data.GetSAPBCCentralServiceInstance class processing failed. htThe SLD data is inconsistent. This is an internal processing problem.","/System/Server/SLDService","com.sap.sldserv.DataCollector","n/a","saptest2","Server 0 60_36694", 
 
######### 
 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 
################ 
 
Full Message Text
CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://saptest2.unx.era.pl:56000/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xit.saptest2), due to: HTTP 503: Service Unavailable
 
################## 
 
Full Message Text 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457) 
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015) 
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238) 
at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:101) 
at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1288) 
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:195) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.readProfile(ExchangeProfilePropertySource.java:177) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.sync(ExchangeProfilePropertySource.java:165) 
at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:582) 
at com.sap.aii.af.service.sld.SLDAccess.syncExchangeProfile(SLDAccess.java:43) 
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:52) 
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:167) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
Import of software component version list from component repository failed 
Thrown: 
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access 
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577) 
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341) 
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198) 
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:443) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:747) 
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:980) 
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateInstances(SAP_SoftwareComponentAccessor.java:204) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateSAP_SoftwareComponentInstances(SAP_SoftwareComponentAccessor.java:239) 
at com.sap.aii.ibrep.server.sldaccess.interfaces.CRAccess.getSwcLinks(CRAccess.java:82) 
at com.sap.aii.ibrep.server.extobjects.SwcAccessor.getEoLinks(SwcAccessor.java:59) 
at com.sap.aii.ib.server.extobjects.EOAServiceImpl.getEoLinks(EOAServiceImpl.java:75) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceBean.getEoLinks(EOAServiceBean.java:66) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0.getEoLinks(EOAServiceRemoteObjectImpl1_0.java:527) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0p4_Skel.dispatch(EOAServiceRemoteObjectImpl1_0p4_Skel.java:232) 
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) 
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) 
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) 
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) 
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
An exception was thrown in the UME/ABAP user management connector. Message: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=localhost SYSNR=60 GWHOST=localhost GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner '127.0.0.1:sapgw60' not reached 
TIME Thu Feb 23 07:28:06 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 16

How can I make a report of all records with the date in the last two weeks?

Hi!
I have records with a date field, I want to create a report that only includes records with a date which is within the last two weeks of the system date, is this possible? Surely this is a basic database function, I would have thought, but I can find no help about it and there's very little in Mac Help about doing anything other than simple stuff with reports.
I'm not a genius with databases, so help with any required formula or what have you would be great!

Hi Jonathan,
Here's a formula you can use with the Match function. 'Date' is the name of the date field, which must be a "Date" type field.
'Date'>NOW()-14
Match will select (highlight) all records matching the query. You'll then need to use Organize > Hide Unselected to show only the matches.
Unfortunately, I haven't found a way to make the NOW() function work in a Find request, and neither Match requests nor Hide Unselected can be included in a recorded search, either of which would reduce repeating the report to a one-button operation.
Regards,
Barry

How to Create a Table in Oracle with XML data type.

Dear ALL,
What are the requirements for creating a table with xml datatype in Oracle: The steps would help very much to know the scripting of the table and how to query and either insert/update and remove data from that table.
Any help, direction, advise would be highly appreciated.
Thanks.

Reffer to this Note.243554.1.
In a nut shell you will need to run catqm.sql

PDF Generation with LiveCycle Data Services

Hi everybody!
I am using LiveCycle Data Services to generate a dynamic pdf. I worked with this tutorial : livedocs.adobe.com/livecycle/es/sdkHelp/programmer/lcds/pdfgen_1.html and i adapted the code to my own example.
I created a pdf template with livecycle designer and i succeed to generate the pdf thanks to LiveCycle Data Services.
Here is my problem :
In LiveCycle Designer i create a table and bind my data connection (from xml source) to this table and i bind subforms to repeating data.
It works when i try to open an overview of the pdf with LiveCycleDesigner.
But when i try to generate the pdf with livecycle data service, there is no repeat of my data. There is only a number of items corresponding to the minimum of repeating i set in livecycle designer binding window...
Is it possible to generate repeating data with LiveCycle DS ?
an example of my xml source :
<item id="1">
<data>blabla</data>
</item>
<item id="2">
<data>blabla</data>
</item>
In livecycle designer, if i set the minimum of repeating to 1, LiveCycle DS generate a pdf with only one item.
if i set the minimum of repeating to 2, LiveCycle DS generate a pdf with only 2 items. etc.
I don't know how to generate an indeterminate number of items...
Thanks in advance for your help.
Bye
Guillaume

Hi Guillaume,
there is no limitation. Dynamic PDF files can be generated with Livecycle Data Services.
You should have a look at the XML file generated by your Flex code. Try to save it and see how the XML file behaves when you generate a PDF preview with Designer. You can go to the menu: File > Properties > Preview > Use XML test data...
With the XFAHelper class, you can either load a PDF or a XDP file. Have you tried with a XDP ?
I've attached a dynamic PDF file that I've created for a customer. I generate a dynamic PDF file using LiveCycle Data Services. Maybe you'll find some clues within the file.
Michael

Problem in working with Japanese data

Hello,
We have an application, which should work for both English and Japanese languages. Our application is working fine for English data but in case of Japanese, we are facing problems. In the application, there is a language setting, where the user can select either English or Japanese. This changes the language of the labels to English or Japanese. We are handling this thru' ResourceBundles. But the data that is entered can be independent of this. In English setting also, the data entered or diplayed could be Japanese. Now we are facing problems at vaious places -
1. When we enter Japanese data and save it, it gets copied into the bean and if there is any error in the saving, the same data from bean comes back on the screen. This data doesn't appear properly in Japanese.
2. When we try to retrieve the already saved data from database, it doesn't show poperly in Japanese.
We are using our own 'toUnicode' function, which converts the data to Unicode before saving the data to database. Similarly, we have tried different encodings like SJIS / Shift_JIS / ISO-2022-JP at various places i.e. in 'Page' directive or in HTML Meta tag or various combinations of these two. Nothing is working reliably. Sometimes for some combination, data retained in the first case is correct but it can't be saved. Sometimes it works with Unicode, sometimes without Unicode. Some combination affects the Japanese labels as well. Otherwise the labels at least are displayed properly.
The same code with just Shift_JIS setting in 'page' directive, worked well in IIS Server for both English and Japanese.
What could be the problem in WebLogic? Does it matter if WL is installed on English or Japanese machine?
Kindly answer ASAP, since the project is getting delayed.
Thanking in anticipation...
-Medha

Hi,
is there a difference in handling Japanese and Chinese chars? If not I
might be able to give you some hints.
Daniel
-----Original Message-----
From: JSB [mailto:[email protected]]
Posted At: Monday, February 12, 2001 6:22 PM
Posted To: internationalization
Conversation: Problem in working with Japanese data
Subject: Re: Problem in working with Japanese data
Have u solved this yet, and how ?
Medha <[email protected]> wrote in message
news:[email protected]...
>
Hello,
We have an application, which should work for both English andJapanese
languages. Our application is working fine for English data but in case
of
Japanese, we are facing problems. In the application, there is a
language
setting, where the user can select either English or Japanese. This
changes
the language of the labels to English or Japanese. We are handling this
thru' ResourceBundles. But the data that is entered can be independent
of
this. In English setting also, the data entered or diplayed could be
Japanese. Now we are facing problems at vaious places -
1. When we enter Japanese data and save it, it gets copied into thebean
and if there is any error in the saving, the same data from bean comes
back
on the screen. This data doesn't appear properly in Japanese.
2. When we try to retrieve the already saved data from database, itdoesn't show poperly in Japanese.
We are using our own 'toUnicode' function, which converts the datato
Unicode before saving the data to database. Similarly, we have tried
different encodings like SJIS / Shift_JIS / ISO-2022-JP at various
places
i.e. in 'Page' directive or in HTML Meta tag or various combinations of
these two. Nothing is working reliably. Sometimes for some combination,
data
retained in the first case is correct but it can't be saved. Sometimes
it
works with Unicode, sometimes without Unicode. Some combination affects
the
Japanese labels as well. Otherwise the labels at least are displayed
properly.
The same code with just Shift_JIS setting in 'page' directive,worked
well in IIS Server for both English and Japanese.
What could be the problem in WebLogic? Does it matter if WL isinstalled on English or Japanese machine?
Kindly answer ASAP, since the project is getting delayed.
Thanking in anticipation...
-Medha

Error while trying to invoice the delivery doc with future date

Hi Gurus,
I am trying to create the Invoice document with future date with reference to delivery document,but the system is not allowing to do and its throwing the error message billing date is greater than current date not authorized.How to resolve this issue.
Thanks and Regards,
hari Challa.

Dear Hari
Curious to know why you are trying to maintain a future date in billing when you yourself very well know that it is WRONG. Logically, the invoice date should be either Actual GI Date from Delivery or the system date.
Coming to your question, in VTFL, for your item category if routine 11 is maintained for the field Data VBRK/VBRP, you cannot achieve what you want.
thanks
G. Lakshmipathi

A serious problem with JTable to update with new data.

I am customizing a JTable. In the table 3 rows and row wise same data presents. After every 30 sec table will be update with new data. But a exception is coming like: ArrayIndexOutofBound 4>=0. Exception is not coming so frequently some time it comes within 1 min or after 1 hour of program running and each time *4>=0* is varies with different number.
Here is the model i am using and to update table i am calling setTableData( ) with updated vector as a argument.
public class MyModel extends AbstractTableModel {
 protected Vector m_vector;
 public MyModel(Vector m_vector) { this.m_vector = m_vector; }
 public int getColumnCount() {
 return m_vector==null ? 0 : m_vector.size();
 public int getRowCount() { return 3; }
 public String getColumnName(int col) { return null; }
 public Object getValueAt(int row, int col) {
 if (col < 0 || col>=getColumnCount())
 return null;
 try{
 MyData column = (MyData)m_vector.elementAt(col);
 switch (row) {
 case 0: return column.gate;
 case 1: return column.time;
 case 2: return column.status;
 }}catch(Exception e){
 System.out.println("Error is here");
 e.printStackTrace();
 return null;
 public Class getColumnClass(int c) {return getValueAt(0, c).getClass(); }
 public boolean isCellEditable(int row, int col) {
 if (row == 1) { return false; } else { return true; }
 public void setTableData( Vector mData)
 this.m_vector = new Vector(mData);
 fireTableStructureChanged();
 }Please help me out.

This is the exception:
java.lang.ArrayIndexOutOfBoundsException: 4 >= 3
 at java.util.Vector.elementAt(Vector.java:431)
 at javax.swing.table.DefaultTableColumnModel.getColumn(DefaultTableColumnModel.java:277)
 at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1047)
 at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
 at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
 at javax.swing.JComponent.paintComponent(JComponent.java:541)
 at javax.swing.JComponent.paint(JComponent.java:808)
 at javax.swing.JComponent.paintChildren(JComponent.java:647)
 at javax.swing.JComponent.paint(JComponent.java:817)
 at javax.swing.JViewport.paint(JViewport.java:722)
 at javax.swing.JComponent.paintChildren(JComponent.java:647)
 at javax.swing.JComponent.paint(JComponent.java:817)
 at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4787)
 at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4740)
 at javax.swing.JComponent._paintImmediately(JComponent.java:4685)
 at javax.swing.JComponent.paintImmediately(JComponent.java:4488)
 at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
 at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)and Column may increase/decrease depending upon data retrieved.

Problem with bool data type in overloading

Please find the following error.
I did following typedef:
typedef bool Boolean;
typedef signed int Sint32;
Problem description:
This error is occurring because Sun CC 5.9 or Solaris 9 g++ considers bool data type as signed Integer, when passed as an constructor argument. First, it is overloading the constructor with �bool� data type and when it comes the turn of �signed integer� to overload constructor, the compiler is giving an error �cannot be overloaded�. The error �redefinition� is also due to bool data type.
Could please let me know, whether i need to add ant compiler option on Sun CC
ERROR in g++:-
( /usr/local/bin/g++ -DSOLARIS_PLATFORM -DUNIX -DPEGASUS_PLATFORM_SOLARIS_SPARC_GNU -DPEGASUS_OS_SOLARIS -DPEGASUS_HAVE_TEMPLATE_SPECIALIZATION -DEXPAND_TEMPLATES -DPEGASUS_USE_EXPERIMENTAL_INTERFACES -Wno-non-template-friend -DTEST_VAI -D__EXTERN_C__ -Dregister= -D_POSIX_PTHREAD_SEMANTICS -Wno-deprecated -DAUTOPASS_DISABLED -DCLUSTER_GEN_APP -DSTAND_ALONE_INTEG -I"/TESTBUILD/p2.08.00/TESTsrc" -I/TESTBUILD/pegasus/src -I"/TESTBUILD/p2.08.00/TESTCommonLib" -O -c -o /TESTBUILD/p2.08.00/TESTobj/TESTBase.o /TESTBUILD/p2.08.00/TESTsrc/TESTBase.cpp );
In file included from /TESTBUILD/pegasus/src/Pegasus/Common/Array.h:74,
from /TESTBUILD/pegasus/src/Pegasus/Common/CIMName.h:40,
from /TESTBUILD/pegasus/src/Pegasus/Client/CIMClient.h:39,
from /TESTBUILD/v2.08.00/TESTsrc/TESTVAIInterface.h:4,
from /TESTBUILD/v2.08.00/TESTsrc/TESTCaVAI.h:24,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.h:11,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.cpp:1:
/TESTBUILD/pegasus/src/Pegasus/Common/ArrayInter.h:49: error: redefinition of `class Pegasus::Array<Pegasus::Boolean>'
/TESTBUILD/pegasus/src/Pegasus/Common/ArrayInter.h:49: error: previous definition of `class Pegasus::Array<Pegasus::Boolean>'
In file included from /TESTBUILD/pegasus/src/Pegasus/Common/MessageLoader.h:42,
from /TESTBUILD/pegasus/src/Pegasus/Common/Exception.h:44,
from /TESTBUILD/pegasus/src/Pegasus/Common/CIMName.h:41,
from /TESTBUILD/pegasus/src/Pegasus/Client/CIMClient.h:39,
from /TESTBUILD/v2.08.00/TESTsrc/TESTVAIInterface.h:4,
from /TESTBUILD/v2.08.00/TESTsrc/TESTCaVAI.h:24,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.h:11,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.cpp:1:
/TESTBUILD/pegasus/src/Pegasus/Common/Formatter.h:114: error: `Pegasus::Formatter::Arg::Arg(Pegasus::Sint32)' and `Pegasus::Formatter::Arg::Arg(Pegasus::Boolean)' cannot be overloaded
In file included from /TESTBUILD/pegasus/src/Pegasus/Common/CIMProperty.h:40,
from /TESTBUILD/pegasus/src/Pegasus/Common/CIMObject.h:42,
from /TESTBUILD/pegasus/src/Pegasus/Client/CIMClient.h:41,
from /TESTBUILD/v2.08.00/TESTsrc/TESTVAIInterface.h:4,
from /TESTBUILD/v2.08.00/TESTsrc/TESTCaVAI.h:24,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.h:11,
from /TESTBUILD/v2.08.00/TESTsrc/TESTBase.cpp:1:
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:92: error: `Pegasus::CIMValue::CIMValue(Pegasus::Sint32)' and `Pegasus::CIMValue::CIMValue(Pegasus::Boolean)' cannot be overloaded
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:147: error: `Pegasus::CIMValue::CIMValue(const Pegasus::Array<Pegasus::Boolean>&)' and `Pegasus::CIMValue::CIMValue(const Pegasus::Array<Pegasus::Boolean>&)' cannot be overloaded
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:291: error: `void Pegasus::CIMValue::set(Pegasus::Sint32)' and `void Pegasus::CIMValue::set(Pegasus::Boolean)' cannot be overloaded
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:323: error: `void Pegasus::CIMValue::set(const Pegasus::Array<Pegasus::Boolean>&)' and `void Pegasus::CIMValue::set(const Pegasus::Array<Pegasus::Boolean>&)' cannot be overloaded
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:377: error: `void Pegasus::CIMValue::get(Pegasus::Sint32&) const' and `void Pegasus::CIMValue::get(Pegasus::Boolean&) const' cannot be overloaded
/TESTBUILD/pegasus/src/Pegasus/Common/CIMValue.h:409: error: `void Pegasus::CIMValue::get(Pegasus::Array<Pegasus::Boolean>&) const' and `void Pegasus::CIMValue::get(Pegasus::Array<Pegasus::Boolean>&) const' cannot be overloaded
*** Error code 1
make: Fatal error: Command failed for target `/TESTBUILD/v2.08.00/TESTsrc/TESTBase.or'
Same ERROR in Sun CC:-
palace /TESTBUILD/p2.08.00/TESTobj-> make -ef Make_SolarisVAICC TESTVAIrun
( /sun-share/SUNWspro/bin/CC -DSOLARIS_PLATFORM -DUNIX -DPEGASUS_PLATFORM_SOLARIS_SPARC_CC -features=bool -DPEGASUS_USE_EXPERIMENTAL_INTERFACES -DTEST_VAI -DEXPAND_TEMPLATES -D__EXTERN_C__ -DPEGASUS_INTERNALONLY -DPEGASUS_OS_SOLARIS -DPEGASUS_USE_EXPERIMENTAL_INTERFACES -DPEGASUS_USE_DEPRECATED_INTERFACES -Dregister= -D_POSIX_PTHREAD_SEMANTICS -DCLUSTER_GEN_APP -DSTAND_ALONE_INTEG -I"/TESTBUILD/v2.08.00/TESTsrc" -I"/Pegasus/pegasus-2.5/src" -I"/TESTBUILD/p2.08.00/TESTCommonLib" -O -c -o /TESTBUILD/p2.08.00/TESTobj/TESTBase.o /TESTBUILD/p2.08.00/TESTsrc/TESTBase.cpp );
"/Pegasus/pegasus-2.5/src/Pegasus/Common/ArrayInter.h", line 47: Error: Multiple declaration for Pegasus::Array<int>.
"/Pegasus/pegasus-2.5/src/Pegasus/Common/Formatter.h", line 103: Error: Multiple declaration for Pegasus::Formatter::Arg::Arg(int).
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 90: Error: Multiple declaration for Pegasus::CIMValue::CIMValue(int).
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 145: Error: Multiple declaration for Pegasus::CIMValue::CIMValue(const Pegasus::Array<int>&).
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 289: Error: Multiple declaration for Pegasus::CIMValue::set(int).
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 321: Error: Multiple declaration for Pegasus::CIMValue::set(const Pegasus::Array<int>&).
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 375: Error: Multiple declaration for Pegasus::CIMValue::get(int&) const.
"/Pegasus/pegasus-2.5/src/Pegasus/Common/CIMValue.h", line 407: Error: Multiple declaration for Pegasus::CIMValue::get(Pegasus::Array<int>&) const.
Thank and Regards,
Dileep

In Sun C++, type bool is not equivalent to signed int. I don't think g++ makes it equivalent either.
Please show an example of source code that is causing the problem.

PDF flyer with attached Data Form how do i upload pdf and submit data simultaneously?

Scenerio user downloads pdf flyer template with attached data form. user customizes flyer and fills out form. user clicks on custom "Submit" button to send form data to php form.
On submit, how can i upload the pdf flyer to our server AND still send the form data to php form?
maybe the local file(pdf) address is sent to the php form along with the form data, then i can use php to upload the file automatically.
any sugguestion???

Hi Mr AP,
are you trying to do this in Reader or in Acrobat? If you're using Reader it won't work unless the form is reader-extended by either LC Reader Extensions on the server or by running it through Acrobat manually and extend the capabilities of the form for reader users (careful - the license of the latter is limited to 500 form recipients).
If you did try it in Reader with a non-extended form the behaviour you'd see is that it just won't work, so that might be your issue.
Cheers
Kai

"Either 10 sec with no data" or "Insufficient bandwidth"

Similar Messages

Maybe you are looking for