Either the Macromedia application server(s) are unreachable or none of them has a mapping to process

We have an IIS install on Windows R2 Standard with a few different websites, 2 of which use ColdFusion 9 successfully.
I've added a new website, but could not get CF to work, getting the message above. To troubleshoot, I've done the following:
Restarted the web server
Manually adding the mappings for cfm, cfml, cfc, cfr etc. and restarted the webserver
Removed the mappings, restarted, then readded
These are the mappings that were in the other 2 websites (I also incrementally increased the numbers to avoid duplicates):
*.cfm, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27348
*.cfml, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27349
*.cfc, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27350
*.cfr, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27351
*.cfswf, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27352
Not sure what I am doing wrong and what worse - not sure where to find information to help troublshooting.
TIA to anyone who can point me in the right direction.

Let me make some guesses: is this is 9.0.1 or above, on IIS 7 (not running in IIS 6 compatibility mode), and had you chosen to add “all sites” when installing CF or later running the web server config tool? If so, it used to be that in doing that, any newly added site would inherit CF settings, but with the above configuration you can no longer rely on that. Instead, you have to rerun the web server config tool to again add “all sites”.
This is indeed a radical change in behavior from prior release. It is in fact discussed in the installer (if you do “all sites” during installation), as well as in the CF Admin and Config manual, and in the online help for the CF admin. But there’s not too much talk about it, so people only trip over it when they move to IIS 7 (and 9.0.1 or above, which was the first release to formally support IIS 7 other than in IIS 6 compat mode.)
Let us know if that helps, or if, perhaps this is NOT the problem, in which case it could be any number of things. Even then, if you run the web server config tool and connect that site to CF (or again redo the “all sites” config), does it help?
/charlie

Similar Messages

Server Error Either the Macromedia application server(s) are unreachable or none of them has a mappi

Server Error Either the Macromedia application server(s) are unreachable or none of them has a mapping to process this request.I got this error.I installed coldfusion 8 on windows 7 64 bit.What should I do?Can't I use coldfusion?Is there any suggestion???

Yes I google before and I tried to do all advice.But there is nothing change.Can you explain or send a link for solving this?

Server Error - Macromedia application server(s) are unreachable

For my test environment, I've got a ColdFusion 8 instance
running on Windows 2003 Server. Everything was fine until I
rebooted the server. Then I started getting an error message:
quote:
Either the Macromedia application server(s) are unreachable
or none of them has a mapping to process this request.
My first thought was an application mapping error or
something happened to the .cfm mappings. Everything checked out
fine though. So I looked in the wsconfig log files and saw this.
quote:
2008-06-04 16:54:58 jrISAPI[ 760:1048] could not initialize
proxy for 127.0.0.1:51800
2008-06-04 16:54:58 jrISAPI[ 760:1048] Couldn't initialize
from remote server, JRun server(s) probably down.
Something was definitely running on port 51800 though since I
could telnet to it. No clue why it couldn't initialize. Any ideas?
Thanks.
Steve

From what I can tell, this error displays when the web server connector exists, but JRUN (coldfusion) server is not running.
I have spent 3 days trying to repair this error message on my Windows XP CF9 Standard Edition.We had coincidentally made some network changes which I assumed right away was the culprit. When I would try and start the JRUN server manually (jrun.exe) it would fail and the log would specify an error to the effect of:
"RMI transport layer does not exists." <---- not the whole error. But it should be specific enough for someone else with the same trouble to find.
I deleted the web server connector from wsconfig.exe and tried to re-add it. Which also failed:
"Could not connect to any JRun/ColdFusion servers on host xxxxx.
Possible causes:
-Server not running:
-----Start Macromedia Jrun4 or ColdFusion 9 server
-Server running:
-----JNDI listen port in jndi.properties blocked by TCP/IP filtering or firewall
-----host restriction in security.properties blocking communication with server"
I knew then (since JRun was not running) I wouldn't be able to re-add the connector until I resolved the JRUN "RMI transport layer does not exists" error. After 2 days of unsuccessfully making sure I had done everything I could to allow the ports that JRUN needed, I was still convinced this was a port issue. I also noticed that MSSQL Express (unrelated service) was not starting either. STRANGE!!
Decided to run MalwareBytes and after a "Quick Scan", it did find a few infections. I removed the infections and MalwareBytes requested a reboot, rebooted, and VIOLA!! Working.
If your ColdFusion configuration was working (in my case for at least a year) prior to a reboot, and then suddenly can't start itself, be sure to run a scan to remove any infections. I'm assuming my infection was blocking the ports that JRun needed to startup. Good Day!!!

Macromedia application server is unreachable

Hi, we are running a virtual server (p2v) copy of our
production and dev CF6MX sites.
The virtual copy of the dev server, works fine.
However, in production we are getting the dreaded "Macromedia
application server is unreachable or it does not have a mapping to
process this request" server error. Our prod server was installed
differently as it was originally intended to be a load-balanced
server so the services in prod have "Macromedia" in their names,
not in dev.
I've re-booted the server, restarted IIS, ran the
bin/jrun.exe utility, and am still getting the error. The jrun
utility yielded this message: "warning Could not find valid
replication peer- assuming this server is first server running in
replication group." I'm not sure if this is a show-stopper or not.
I also looked at the server log and nothing looked awry.
Any other ideas ? I've checked the forum here, and someone
posted a link for this, but the link was dead...

"warning Could not find valid replication peer-assuming htis
server is first server running in replication group" is telling you
this is the first instance to start up. Not a big deal (unless
you're expecting other instances to be there already or this wasn't
the first instance you expected to start).
If you changed the name of the server or IP addresses during
your p-to-v process then the xml files may be trying to contact the
wrong IP addresses.
When I get the application server is unreachable error, a
quick iisreset or restarting the World Wide Web Publishing service
will fix it. Sometimes a race condition happens and IIS and JRun
seem to grab the connector at the same time and that error ends up
showing up.

What is macromedia application server is unreachable

I have tried repeatedly to reach a website which I have visited previously, but continue to get an error message that reads:
macromedia application server is unreachable

Adobe bought out Macromedia years ago. Try the Adobe support forum. <br />
http://forums.adobe.com/index.jspa

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

The BPM application server is not available

Hello there
I have installed and configured Aqualogic Enterprise for
Weblogic from scratch following the manual http://edocs.bea.com/albsi/docs57/adminguide/index.html.
I have my weblogic server started and have started servicing all requests for wlj2eedeployer.
But when i click on the leaf button for my engine ear or any ear in Engines/EditEngine/J2EE Application server files,the install icon is not coming.The BPM application server is not available is the message displayed.Please help.

yup.I can see the hiperspace with my processes in it.
As you said i installed and configured from scratch.
But when i click on the process application
"Component execution error.
Note: In order to send the administrator the information he needs to solve this problem, complete the following steps:
With the error message still displayed in your browser, go to the File menu of the browser and select the option 'save as'.
A dialog to choose the directory where to save the file will be displayed. Browse until you get to the directory which you would like to save the page with error.
Give the file a name and click 'save'. By doing this, you are saving the error message to a file from which the administrator can identify the problem by looking at its code" is getting displayed.I tried the sample hello world process also.I got the same error.But am very happy that i can view my processes.thanks for all the help.

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

JSP and the Sun Application Server. Is it really nessecary?

Downloaded Creater 2, and love it. I really didn't realize how easy JSP is. Though I would be interested in knowing: Does the Sun Application Server needs to be running in order to use JSP.
Talking to my Hosting Provider, they have a plan in which JSP is included but the Sun Application Server is not. If I decide to get their JSP Hosting plan, do I truly need the Application Server to run my JSP forms and all the other great things that Creater 2 has to offer?
Thanks in Advance!
Josef

No you don't. You're app will run in any JEE server like Tomcat, Jetty, JBoss, Jonas, etc. If you are using EJBs, however, the server you choose must have EJB support.

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

Can't connect to the window application server.

I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.

Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob

Either the Macromedia application server(s) are unreachable or none of them has a mapping to process

Similar Messages

Maybe you are looking for