EJB Mapping Parent child persistance not working in javax.persistance

Hi,

Container managed injections can only work in resources that are container managed. You mention RESTEasy so I assume JAX-RS - that was added to the JEE spec since JEE6, which JBoss 5.1 does not service (it is a JEE5 server). If you want this to work you likely have to upgrade to JBoss 6.x, in which case I advise you to go all the way to JBoss 7.1 which is an awesome piece of tech.
When you crosspost, do mention that you do that. Otherwise you are wasting people's time when they try to answer in one site and the answer was already given in another:
https://community.jboss.org/thread/211905?tstart=0

Similar Messages

OBIEE 11g - Navigation in Parent Child Hiearchy not working

Hi All,
I have a employee parent child hierarchy and I want to show revenue for each employee in the report. I have modeled my revenue as a measure like case 4 shown in the following link
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
So for example this is my report ,
--David (30)
---Sandra (15)
-----Joe (10)
Joe'e revenue is 10, Sandra's is 5 (showing her 5 Joe's revenue) and David's is 5 (showing his 5 Sandra's revenue)
Issue :
Now what I want is to provide action link on the revenue column so that when user would click on revenue for any employee it would direct them to a detail report showing the bifurcation.
For ex, I want that when user click on 15 which is Sandra's revenue, he would be redirected to a detailed report for Sandra and similary for Joe and David
MY ISSUE IS that the navigation is NOT working for sandra and Joe. It is only working for David (who is the ancestor of sandra and Joe). When I click on 15 to see sandra's detail report, it doesn't do anything and in the bottom left corner of the browser status bar below I see an ERROR saying
(same for Joe but David work's fine)
Message: 'getLevelInfo(...)' is null or not an object
Line: 1
Char: 11142
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/answers/selectionsmodel.js
Why is that happening? Is that because I have modeled the revenue as an measure and not attribute. Is navigation not possible in this case?
Anybody has any solution or workaround for this, it will be highly appreciated.
Thanks,
Ronny

Ok, so let me explain this in detail and give the structure of my tables and the data,
There are three tables.
1.Parent Child relationship table - pctable
2.Closure table which OBIEE creates through a script - reltable
3.Fact table which contains the revenue - facttable
This is the data
pctable
personid | managerid
David | NULL
Sandra| David
Joe|Sandra
reltable
memberkey | ancestorkey |distance |is_leaf
David|NULL|NULL|0
David|David|0|0
Sandra|Sandra|0|0
Joe|Joe|0|0
Sandra|David|1|0
Joe|Sandra|1|1
Joe|David|2|1
facttable
personid|revenue
David|5
Sandra|5
Joe|10
and my joins conditions are, I join pctable to reltable and then reltable is joined to facttable like this.
pctable.personid = reltable.ancestorkey
reltable.memberkey = facttable.personid
and then in the report, when I pull up the pchierarchy build from pctable and revenue , I get as below and like I said, when I click on Sandra to see the revenue she contributes, I am not able to navigate. Can you let me know what modifications needs to be done?
---David(20)
----Sandra(15)
------Joe(10)

Parent Child Hiearachy not working while applying from prompt

Hi,
I have a requirement to have a prompt on parent-child hiearachy. I am able to create prompt but when we are selecting anything in that prompt then value is not passing in the main report. I mentinoned "override with prompt" in selection steps, but still prompt is not working. I am using OBIEE 11.1.1.5.
Please let me know if I am missing anything.
Thanks
Anirban

Hi All,
Any updates on this.
Thanks
Anirban

Dimension with Parent-Child Hierarchy - not working

hi,
i tried making "Dimension with Parent-Child Hierarchy" as described in your tutorials.
i finished with the admin tool and database changes and with no errors.
when trying to create a new answer, by only puting the hierarchy column in the answer.
the result show "no result" exist.
i am not sure what i am doing wrong. maybe you can point me to the problem?
thanks
Mirit.

956850 wrote:
hi,
i tried making "Dimension with Parent-Child Hierarchy" as described in your tutorials.
i finished with the admin tool and database changes and with no errors.
when trying to create a new answer, by only puting the hierarchy column in the answer.
the result show "no result" exist.
i am not sure what i am doing wrong. maybe you can point me to the problem?
thanks
Mirit.Hi Mirit,
What is the table that you created hierarchy on?
Which column in the hierarchy you pulled into your reports to see the No Result message?
Please query the table and see if has data.
Thanks,
G. SK

Parent Child Node not working

Hi,
I have done a application with Tree by NST table .
The initial screen will contains around 6 fields , the first field (ObjKey) will be displayed. I have stored in one internal table and i i want to display the child node for correponding objkey,for that child node again im storing in to the same internal table . now when i to expand the child node from the output there was no details coming , i got one empty line thats it .
I have seen many links available in the forum. but not helpful , please explain

hi andre .
i am also facing same problem .......
my context is like ......
folder
| folder_content (recurcive node)
| file
| | file attribute
| folder attribute.
can u plz tell me about recurcive node .... if have any doc. then plz give the link ....
thanks .

TS1702 After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me

After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?

Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Amber update but map and bere drive not work

After amber update my here map and here drive not work just open the app but not open and close automatically

Same thing here. I have tried all things and have a similar issue
http://discussions.nokia.com/t5/HERE-Location-based-services/Settings-gt-Applications-does-not-have-...
NOKIA NEED HELP HERE !!

The time limits on the parental controls do not work. Apple does not seem to know how to fix this issue since the problem has been going on since at least leopard.

The time limits in the parental controls do not work. I have several mac systems and they do not work on all of them. Also, I have had this problem since at least snow leopard and it is very frustrating that Apple is unable to fix a simple issue like this. All they have to do is somehow 'hard-wire' the time limits to the system clock but they are not listening. I used the feed-back feature in their support webpage and hopefully everybody else experiencing this issue will too. Thus, if they get a thousand notes on this issue they might listen and finally fix it.

Well, the whole system with those time limits are funky. Sometime this happens, sometime that happens. When the user is on the bed time limits do not work nor do the length of time limits. It is very frustrating as one of the reasons I bought an apple in the first place was those parental controls which did not exist in Windows prior to Windows 7. I do have a Windows 7 machine now and the bed time limits work there. Maybe you have a Windows 7 machine as well and can let them use it.

DB Adapter wizard – WHERE clause on parent and child tables not working.

I have two tables, SECURITY and SECURITY_POSITIONS, where SECURITY has a 1:M relationship with SECURITY_POSITIONS. I used the DB-adapter wizard to create the relationship and the following WHERE clause expression which is looking at both the parent and the child tables;
The expression builder looks like this:
AND
|--- 1. partitionKey EQUAL p_SearchKey
|--- 2. securityType EQUAL “DBT”
|--- 3. securityPositionsCollection.dealReference EQUAL “NA”
The primary key on SECURITY = PARTITION_KEY and SECURITY_REFERENCE
The foreign key from SECURITY_POSITIONS to SECURITY = PARTITION_KEY and SECURITY_REFERENCE
securityType is on SECURITY table (master)
securityPositionsCollection.dealReference is on SECURITY_POSITIONS table (child)
The invoke on the database adapter is selecting a row in securityPositionsCollection for each child row, rather than just those with dealReference = “NA”!
I turned on DEBUG logging in the BPEL console and I can see that there are 2 SELECT queries run (guess this is how Toplink does it!), where the 1st query appears to select the parent rows and the 2nd query selects the child rows.
However the 2nd query is not working because it is failing to select only those child rows where dealReference = “NA”. Also, don’t know why the 2nd SELECT query needs to specify the child SECURITY_POSITIONS table twice in the FROM clause, because that seems to be causing the problem.
1st query executed is as follows;
SELECT DISTINCT t0.PARTITION_KEY, t0.SECURITY_REFERENCE, t0.SECURITY_TYPE
FROM CENTRAL.SECURITY t0, CENTRAL.SECURITY_POSITIONS t1
WHERE ((((t0.PARTITION_KEY = ?) AND (t0.SECURITY_TYPE = ?)) AND (t1.DEAL_REFERENCE = ?)) AND ((t1.SECURITY_REFERENCE = t0.SECURITY_REFERENCE) AND (t1.PARTIT
ION_KEY = t0.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
2nd query executed is as follows, where child table appears twice! ;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY_POSITIONS t2,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = ?) AND (t1.SECURITY_TYPE = ?)) AND
(t2.DEAL_REFERENCE = ?))) AND
((t2.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t2.PARTITION_KEY = t1.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
Anyone experienced the same problem e.g. why is toplink making the query more complicated that it needs to be, because the query only needs to reference the SECURITY_POSITIONS table once, as follows;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = '200706200000') AND (t1.SECURITY_TYPE = 'DBT')) AND
(t0.DEAL_REFERENCE = 'NA'))) AND
((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t0.PARTITION_KEY = t1.PARTITION_KEY)))

Hello,
It looks like you have configured your 1:M relationship to use batch reading. This causes the query to bring in the Security_Position table's objects to use the same selection criteria as was used on the initial query, with a join statement. This is more efficient in most cases as it ensures only the Security_positions needed for the Security objects to be fully built are read, in a single query.
The selection criteria added is only used to filter out the Security objects. All referenced Security_Positions must be read in for the returned Security objects so that the data matches what is in the database. If you do not want the Security_Positions, you might try using indirection on the mapping which will delay the second query until you need the Security_Positions. Or, if you want only the Security_Positions with dealReference EQUAL “NA", you could do a query specifically to filter on them.
Best Regards,
Chris

Parent Child Dimension Not displaying Name value.

I have a parent Child attribute in my dimension. It show the correct ID value in the reports but when I change the value from the NameColumn to be something else it still only shows the ID value.
I have an identical case in another dimension and it is working correctly. However this dimension for some reason does not seem to work and I believe they are built the same way I must be missing something. I have tried to show the OrgNodeID
and tried to display the OrgNodename but neither displays all it displays is the intdimParentOrgNodeID.
My dimension table looks something like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID)
intDimParentOrgNodeID
intOrgNodeName
In the Propertys I have set
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumn = tbldimOrgNode.intOrgNodeID
Parent-child values
=NonLeafDataVisible
=*(Direct)
=
=ParentIsBlankSelfOrMissing
=(none)
Ken Craig

I have been pulling my hair out for days to find this and what I finally found that resolved this shocked me and I am still not sure why it would matter. You can see below my table and then dimension info. Although I agree my OrgNode ID attribute
is really not needed in AS and could be removed.   In places where that is used we could instead rename the key column Dim OrgNode ID to OrgNode ID.    However why the key attribute must have the name column set to intOrgNodeID
instead of just using the Key value of intdimOrgNodeID is what I am lost at.
Outside of this parent dimension I have never seen issues with this. I want to say sometimes in the past I have seen duplicates if I use the surreget key to display the actual ID so I have normally left that as a key and just added another attribute
to house the actual ID, like I did below.
Can someone explain to me this and what is the best suggested practice here.
My table is like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID from source and used by customers)
intDimParentOrgNodeID (ID used for parent child (it is the Parent intOrgNodeID surreget
key intdimOrgNodeID))
intOrgNodeName (Source Name)
My AS dimension is like below
Dim OrgNode ID
AttributeHierarchyVisible=False
KeyColumns = tbldimOrgNode.intDimOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
OrgNode ID
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
OrgNode Hierarchy ID
Usage=Parent
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumns= tbldimOrgNode.intOrgNodeID (WChar)
Change I had to make was this
Dim OrgNode ID
From     NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
to
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
Ken Craig

XSLT Mapping with Java class not working in Integration Repository

Hi,
I have an XSLT mapping program with Java enhancement and I was able to successfully tested it in Stylus Studio. However, when I imported the Java class and the xslt program in Enterprise Service Builder and tested it, my program does not compile.
Here is the error message: "Transformer Configuration Exception occurred when loading XSLT mapping_temp.xsl; details: Could not compile stylesheet".
My java program is in a zip file containing SOAPHeaderHandler.java and SOAPHeaderhandler.class. My Java has a package com.nga.xslt.
Here is the declaration of my Java class in the XSLT: xmlns:javamap="java:com.nga.xslt.SOAPHeaderHandler"
It seems that it could not read the java class. Can you please advice what is wrong?

Hi ,
select XMLTOOLKIT option in Operation mapping and execute it.
I am not sure we can call java program in XSLT Program,but alternative is copy the code and use it in XSLT mapping it self,that means your XSLT program will become with JAVA extensions.
then in Operation mapping level select SAPXMLTOOL kit option and execute it. i hope it will work. if it is not working then you have deploy some JAXP files on server,because the way execution of XSLT Mpaping program got changed,like when eve you executing XSLT with extnasions( if you are not using XMLTOOL kit option) then you have to use latest version of JAXP.JDK files.
Regards,
Raj

Script populate parent-child hierarchy not running

Hallo guys
I have problem when running script populate Parent-Child Relationship Table.
Here is the script.I don't even change the script.just run it in PL/SQL
declare
v_max_depth integer;
v_stmt varchar2(32000);
i integer;
begin
select max(level) into v_max_depth
from V_D_BRANCH
connect by prior BRANCH_KEY=PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null;
v_stmt := 'insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_KEY, DISTANCE, IS_LEAF)
            select BRANCH_KEY as member_key, null, null, 0 from V_D_BRANCH where PARENT_BRANCH_KEY is null
            union all
            select member_key,
            replace(replace(ancestor_key,''\p'', ''|''), ''\'', ''\'') as ancestor_key,
            case when depth is null then 0
            else max(depth) over (partition by member_key) - depth + 1
            end as distance, is_leaf
from
select member_key,depth,
case     when depth is null then '' || member_key
when instr(hier_path, ''|'', 1, depth + 1) = 0 then null
   else substr(hier_path, instr(hier_path, ''|'', 1, depth) + 1, instr(hier_path, ''|'', 1, depth + 1) - instr(hier_path, ''|'', 1, depth) - 1)
end ancestor_key,
is_leaf
from
    (    select BRANCH_KEY as member_key, PARENT_BRANCH_KEY as ancestor_key, sys_connect_by_path(replace(replace(BRANCH_KEY, ''\'', ''\''), ''|'', ''\p''), ''|'') as hier_path,
      case when BRANCH_KEY in (select PARENT_BRANCH_KEY from V_D_BRANCH ) then 0 else 1 end as IS_LEAF
from V_D_BRANCH
connect by prior BRANCH_KEY = PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null
( select null as depth from dual;
for i in 1..v_max_depth - 1 loop
v_stmt := v_stmt || union all select '' || i || '' from dual;
end loop;
v_stmt := v_stmt || ) )
where ancestor_key is not null;
execute immediate v_stmt;
end;
but I got errors like following:
Error report -
ORA-06550: line 19, column 12:
PLS-00103: Encountered the symbol "insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_" when expecting one of the following:
   ( - + case mod new not null <an identifier>
   <a double-quoted delimited-identifier> <a bind variable>
   continue avg count current exists max min prior sql stddev
   sum variance execute forall merge time timestamp interval
   date <a string literal with character set specification>
   <a number> <a single-quoted SQL string> pipe
   <an alternatively-quoted string
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
what should I do guys?any idea,any solution would be appreciated.thanks alot guys

956850 wrote:
hi,
i tried making "Dimension with Parent-Child Hierarchy" as described in your tutorials.
i finished with the admin tool and database changes and with no errors.
when trying to create a new answer, by only puting the hierarchy column in the answer.
the result show "no result" exist.
i am not sure what i am doing wrong. maybe you can point me to the problem?
thanks
Mirit.Hi Mirit,
What is the table that you created hierarchy on?
Which column in the hierarchy you pulled into your reports to see the No Result message?
Please query the table and see if has data.
Thanks,
G. SK

DAC tasks are not running in Sync.Parent - Child ROW_WID not proper.

After the completion of DAC, When I tested the reports, one of the report is not populated. The root cause which I analyzed is the child table W_product_DX is not having same ROW_WID ids as parent W_Product_D and hence the join fails to pull the child records.
When I see the log file , the custom task that populated the child table has run ahead of the parent dimension table therefore the child has not populated with new/updated roe_wid values.
Do we have do some setting in each task so that it runs in a particular order of execution....
Any ideas how to resolve this problem. Help appreciated. __.____

Did you create an entirely new custom task or modify an existing one?
If you did one from scratch you wil need to analyze the location of the other tasks and modify the order in your execution plan.
This section of the documentation covers execution order:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10759/dacdesignetl.htm#i1041265

Parental control is not working correctly

hi,
when I initially got my iMac, it seems the parental control I set up for my son's account was working fine with respect of the time allow to use the computer but not it does not work.
no matter what I tried (limit computer to use, weekend time limits, or bedtime), it does not work
is there any upgrade or fix for this?
thanks
adaltam

I have the same problem. If you've found the solution, please share.

EJB Mapping Parent child persistance not working in javax.persistance

Similar Messages

Maybe you are looking for