Eject is not working when installer asks to insert second disk
I have a quite strange problem, when i'm installing world of warcraft on my laptop, everything goes allright for a first (of 5) dvd, it's running install till 20% and then asks to insert a second disk. When i'm trying to eject the first one it says, that a disk is in use and refuses to eject it (nor the eject button, nor dragging cd to bin works). But this is not the end, when i even closed the installer, it still is saying, that disk is in use, and doesn't want to eject it until reboot.
Maybe someone had this problem and solved it? Please, help, i don't want to download 4 gigs of installation.
Hello,
I just had my DVD drive replaced by Apple. This did not solve my issue. I am still unable to install WoW. Any help would be much much appreciated... This is SO frustrating...
Thanks!
Similar Messages
-
I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats thisI had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
Mouse not working when reinstalling OS X with install disk
I am trying to reinstall OS X 10.3 on iMAC G5 after a hard drive crash with the help of the original install disks, but my wireless mouse does not work anymore. Any ideas how I can solve this or go through the installation process with the keyboard alone? I couldn't find a keyboard shortcut to tab from a list in a window to the select button...
How is your mouse not working? Is it dead?
Is the wireless mouse a Mighty Mouse or a 3rd party mouse?
Does you mouse need batteries?
*Just in case it's dirty:*
http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
"Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
Some cell phone leather cases actually fit right over the Mighty Mouse.
Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.
Only do the following if your warranty has run out:
Cleaning inside and dismantling the Apple Mighty Mouse
If so, then I suggest (if your 1 year warranty is not up and/or you have Apple Care Protecton Plan) you call Apple Tech Support & ask for a replacement.
=========================
Mighty Mouse Take Apart Photos -
I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.
Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia -
Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) CanadaHi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I kept getting reminders to update my iphone to v6, so I did so and I am not happy! It deleted all of my apps, so then I had to reload them. Now many of the apps do not work - when I try to open them they keep asking for my apple ID and PW and when I enter this it just goes away and never opens. Anyone else had this issue?
Happened to me once awhile back. The exact same thing. What I did to get everything working again was open up itunes on PC and click on "Apps" section (not the one in your iphone section, but the one in the "Libraries" section near the top). Then proceed to totally delete all of the apps that aren't working (if it asks if you want to send to recycle bin click yes). Re-sync phone, which will remove them from the phone. And, finally, re-install them. It was a pain, but the only thing that worked. Hope it works for you. Good luck!
-
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
PDF conversion with PDF2ID; Hypertext not working when exported back to pdf.
I have done a PDF conversion with PDF2ID, however Hypertext is not working when I exported it back to pdf. I am using the PDF2ID plug-in program to redo all the product booklets for our company as the hypertext did not work when downloaded to any smart phone. All that appeared were blank placeholders in each booklet index page.
According to the PDF2ID people the program plug-in recovers all URLs static and dynamic and bookmarks and local links and suggested I check with Adobe ID5 for help, but Adobe says my $1,000 ID5 is no longer supported and that I should go to the forums.....so here I am.
This is the first time I've even opened my ID5, so I'm a bit lost. Now I need to improve the quality of the PDFs, as we also need to convert all images to TIFF-CMYK in order to have the booklets printed & bound professionally. they tell me ID can do that.
Any help is greatly appreciated.
DavidDaveorne wrote:
they tell me ID can do that.
Ugh...in some companies, that is training.
Don't take this the wrong way David, but of course ID can't do anything. PDF2ID conversions can be sketchy in the hands of the experienced. The same can be said of properly preparing matials for print. As Bob has already alluded, you're in an unfair position there. It's not uncommon for "management" types to just throw some sophisticated tools at a need and expect someone to make it work. In order to do what's being asked of you, you'll have to learn a fair bit about InDesign and production. It's too soon to ask about the output when you haven't learned to manage the input. -
Dynamic drill link is not working when i substitute some parameters in Plus
Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
VikramHi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael -
my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?
It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
Jsp:useBean not work when I install aplication!!
Hi
I developing an application with UIX JSP on Jdeveloper 9.0.2 and i using something like this:
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session" />
<jsp:setProperty name="cbean" property="dataSource" value="jdbc/BiblosConnectionCoreDS" />
</jsp:useBean>
<%
try{
cbean.connect();
This code work fine in standalone mode, but when i install this application on 9IAS, with an archive War, the code <jsp:useBean, not work.
What is missing for? o What is the reason for this situation
Thanks for some help?many thanks for your reply, and I have download new updates driver from your website (http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_890.html) and Installer it on my Y410 but it still does not work!!!
the firstly: when I star up with win7, I can see a speaker icon right down near the clock, when I click mouse on it, I can see: Volume Mixer - Speaker with Device(Speaker Hight definition Audio Device, Digital Audio(S/PDIF) ( Hight definition Audio Device) ).
Look in devicemanger I can see "Sound , video and game controll " has already installer with 'Hight definition Audio Device ' & 'Unimodem Hafl-Duplex Audio Device' below... but I cannot hear the sound when I play music, video, games...etc...
the second: when laptop wakeup after 'sleep' mode, I can hear sound on speaker! but headphone jack does not work when I plug my headphone jack into it (I cannot hear sound with headphone), however I still hear sound from speaker, in this case!
Can you help me or tell me how I can do ?!
Thanks and Best Regards,
jupitervn -
Modem on DV7-3069wm not working when AC Adpater is plugged in
A friend asked me to look into a problem they are having...
Their 56K modem does not work when the AC adapter is plugged in. It works just fine when the laptop is running on the battery. Even if they are connected (using battery) and plug the AC adpater in the modem disconnects and won't connect again.
Any ideas?Any help would be appreciated.
-
For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???
I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.
-
Keyboard backlighting not working when using Windows in Boot Camp
Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary
Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.
-
My iphone is not working when i plug off from charger.
My iphone is not working when i plug off from charger. Evenmore when it is on the charger and it still not working, it asks to connect to i-tunes but i can't and i can see only emergency calls. What should i do?
If it only works when connected to a charger, that would indicate a battery issue.
As for the other issue... do as it suggests and connect to iTunes then restore. There is no logical, intelligent expectation that anything on the device can be accessed as long as the "Connect to iTunes" screen is displaying.
Maybe you are looking for
-
Some Questions I Have About the GE70 Apache Pro
Hi Y'all, I'm new here to the MSI Community and am looking to make my first purchase of a MSI Notebook. I'm looking at the new GE 70 Apache Pro because of the budget I have to work with thanks to having to go out and spend $6K to get my car fix
-
Why are images on page blinking after the OSX 10.9.3 update
Why are images on page blinking after OSX 10.9.3 update on 5/21/14?
-
I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad. Help!
-
Is it possible to show some type of busy/waiting indicator in OAF?
I have a submit button on an OAF page that invokes a procedure in my AM that may take several seconds to complete. I would like to display some type of indicator to the end user that the application is busy while the AM method is being executed. I'd
-
Captivate 6 and Flash 9 compatibility
Hi, We have found that published Captivate 6 executables are not running on our WinXP PCs that have Flash 9 installed. The files do have the Flash 9 compatibility option selected when they are published. We've found that after installing Flash 11, th