Ejecting Disc 2 following Instal of PS10

I have just loaded Adobe Photoshop Elements 10 and Premiere Elements 10; and the DVD driver cannot be opended. An error message has resulted: EjectingDVD RW Drive (F:) PEPE10 Win 64Bit. Can anyone help with this problem (For Info I loaded Disc 2, initally I loaded Disc 1 but the program I should use Disc2 - so I deleted the download from Disc1). 007RB

Try to open it while the system reboots. If not, use a paperclip on the emergency eject hole.
Mylenium

Similar Messages

Cannot eject disc after installing Mountain Lion OS X

after upgrading to mountain lion my optic drive would not eject CD-R's? After multiple failed attempts with apple tech support and believing the super drive to be faulty, I found that the ONLY solution to ejecting the disc was to put the Imac into "fire wire" mode by holding the T key while booting up, then once in fire wire mode hitting the eject key. I believe there is some flaw with the mountain lion OS at this time, that does not seem to work well with the optic super drive? store bought CD's seem to work just fine. Has anyone else experienced this same problem?

hi Aime1984 / Ogelthorpe
My Mac came with ML so I don't have the luxury of rolling back to Lion.
I have just sent this response to Sky. I will update this thread as and when I get a reply.
Hi there
Thanks for your reply.
I must admit I'm a tad dissapointed in Sky that the current version of OSX isn't supported over 6 months after its release. Thing is on all of Sky's Sky Go advertising they say it is compatible with Mac. What they forget to say it isn't compatible if you buy a new one!
Thanks in advance
Jonty
Jonty

Eject Disc Message??, Eject Disc Message??

Odd problem. I just set up Airport Express. No issues with install. No issues with internet access. Problem is as follows:
When I put my Imac in sleep mode it appears to sleep for about 3-4 seconds than wakes up and message on screen says; did not eject disc properly etc. Than advises to look in finder for disc and eject. There is NO disc in the Mac! I have an Airport Express, Verbatim hard drive and modem all running through surge protector.
Not sure what is happening. I did restart computer but again if i put to sleep , sleeps for seconds and wakes up with the above disc message.
Any ideas??
Thanks
JK

I had this problem too, where it seemed I couldn't go eight hours without the Duo drives dropping and getting the "disc was not ejected properly" error message.
I tried the following and so far it seems to have fixed the problem:
In System Preferences > EnergySaver, make sure the setting “Put hard disks to sleep when possible" is unchecked.
I did this only on the Power Adaptor tab, but you might want to uncheck the setting on the Battery tab as well to be safe. (In my case, the Duo drives are unlikely to be attached when I’m running on battery, so I left the setting checked for the Battery tab so that the system can still power down the internal drive.)
Since I made the above change ten days ago, the Duo disks have not dropped, even when I left the system on with the Duo disks connected for a couple of days.
FYI I have the Duo set up with two RAID 1 sets spanning the two drives. I'm using Mavericks 10.9.4.

My 2007 intel imac ejects discs within 2 seconds

My 2007 intel imac ejects discs within 2 seconds. The last time I used my disc hardware was to install software for a new Cannon all in one. It worked perfectly. I have tried many discs including one movie made on this same machine. Pleease help me troubleshoot before I have to transport my computer to the Apple store. Thank you in advance.

It could be that the laser has dust on it; a laser cleaning disk is available at stores which specialize in audio and video- BestBuy, or OfficeDepot would be a place to start. Run a cleaning session to see how that plays out. It could be the optical drive itself. The best approach is first to try steps that do not involve transporting your iMac as you indicate.

I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance " Help pleas

I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Mac won't eject disc

I have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up. Any advice?

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Eject disc

iMac won't recognize loaded photo CD and can't eject disc. Suggestions?

Follow these instructions and see if it helps :http://www.macyourself.com/2009/05/01/the-ultimate-guide-to-ejecting-a-stuck-dis c-from-mac-superdrive/

Vista problem, cant eject Disc 1

Trying to install Vista Business on a 50GB partition of my new iMac (2GB) running 10.5.2.
Installation begins and Windows goes along perfectly and then asks me for disc 2. Problem is, I have no way to eject disc 1. The keyboard eject button does not work, windows offers me no button, and there is of course no way to manually eject.
The Microsoft tells me that Vista comes ONLY in multi disc install and I see that some of you have installed Vista with Bootcamp. HOW ARE YOU DOING IT?
Thanks

Natgreg:
Welcome to the Forums:
That Upgrade version of Windows XP is your problem and therefore you are unable to install XP on your computer. Boot Camp requires a full version of Windows XP/SP2 or any full version of Vista.
You said that your work has over 200 computers and everyone has upgraded to windows XP. Remember that your work probably has Windows based PCs and therefore those people already had an earlier version of windows installed and therefore they could upgrade. On your Mac, you will are installing windows for the first time and therefore will need a FULL RETAIL VERSION (OEM VERSIONS WILL WORK TOO).
Where do you get a full version of windows? You will need to purchase it.
Axel F.

DVD player 5.4 keeps crashing using a variety of DVDs. I have OS 10.6.8, and have repaired permissions, verified the disc, and installed the 10.6.8 update combo. Several previous questions have adressed this problem. What is the solution?

DVD player 5.4 keeps crashing. I have seen here that a number of other people have had this problem. I recently started one DVD, and when I went back to it, it opened to a black screen twice. It also crashes with other DVDs after I scroll ahead or back. It gives an error message that it is skipping damaged areas, or sometines error 69889. Playing this on a PC, however, there is no problem. I repaired the permissions, verified the disc, and installed the OS 10.6.8 combo update, all to no avail. Techs told me that it is usually the hardware, so I bought a LaCie external combo drive. Still crashes. Looked on Apple downloads and they don't list a 5.4 to replace this version. Mac informer.com offers a free download for DVD 5.5- should I try this? Why doesn't Apple fix this problem?

Your suggestions did not help. I repeated them again after the first try did not succeed. Any other ideas?
Would installing another copy of DVD 5.4 help? How can I get another copy of DVD player 5.4, since Apple does not seem to offer it? I do have the disc for Snow Leopard, but am not extremely tech savy (and maybe it is the same corrupted version).

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

Install Failed: The following install step failed: run preflight script

I'm trying to reinstall Photoshop CS2 on an intel iMac, OS 10.5.5. I ran the install program, after a few seconds I get the following error message:   "Install Failed: The following install step failed: run preflight script for Adobe Photoshop CS2. Contact the software manufacturer for assistance." (I did contact adobe, but they no longer support CS2) Originally, I had installed PS CS2 when I was using OS 10.4.X, then I upgraded to 10.5.x. PS CS2 was working fine on my system. Then I accidentally deleted the program, now I'm having trouble reinstalling. I'd appreciate any help that you can give me.

I encountered the exact same problem - I had upgraded to CS2 from a previous version of Photoshop, back
when I was using OSX 10.3.9. Later, I upgraded my OS from 10.3.9, to Leopard (10.5.8.)
CS2 always ran flawlessly, through all those systems.
Then I had occasion to reformat my HD and reinstall Leopard 10.5.8.
That's when the CS2 installer failed, with the same message mentioned above.
When I called in, they basically said, buzz off....we won't help you.
First, this shows that their software is flawed.
They managed to allow this problem to occur due to inept programming.
Now they are either incapable, or unwilling, to write a programming fix for this problem.
It reeks olf ineptitude, plus colossal, inexcusable arrogance and disrespect for their customer base.
Just my humble opinion of course...and I've been a Photoshop user since 1990.

I own PSE 10 installed on my MacBook Pro. Can I use the disc to install it on new iMac?

Have PSE 10 installed on my MacBook Pro. Can I use the discs to install it on my new iMac? also considering PSE 11 and Lightroom 4. Comments?

Yes you can install it on your new Macintosh. If it does not have an optical drive then you can copy the contents of the installation media to a USB drive and then install the software from there.

How far should SuperDrive eject discs?

How far does your SuperDrive eject discs?
The one on my MBP Core 2 Duo 17" 2.33 GHz ejects recordable discs only about 1-3/8 in, which makes it impossible to remove them without touching the top or bottom surface. My newer MBP Core 2 Duo 17" 3.06 GHz ejects them much farther (about halfway), so they can be handled by the edges instead.
The problem doesn't occur with commercially pressed installation discs, only with discs I use to record on (Taiyo Yuden 8X DVD+R, Verbatim 8X DVD-R and Taiyo-Yuden 8X CD-R).
This is the second replacement of the drive from AppleCare with the same problem. (At least I think they replaced it a second time. The service record said, "Doesn't eject media" instead of "Doesn't fully eject media," so maybe they tested it and thought it was fine.)
Is this normal behavior? Anyone else seeing this?
Thank you,
David

MacBookPro Lover wrote:
My MBP 15" doesn't eject very far, but a little more than what your's does (I'd say around 2"). It does ok for me, though.
Do you notice any difference between commercially recorded discs and recordable ones?
David

Bluray burner ejects disc before avchd burn completed

blu-ray burner ejects disc before avchd burn completed Premiere Elements 12. Any suggestions please.
When I first got the blu-ray burner it worked perfectly with Premier Elements, burning both blu-ray and avchd discs. Now it won't do either
Bug in Premiere Elements I guess, just like the continuing crashing of Elements!? I have to save my work every few seconds to make sure I don't loose any!!!
Al

aljohird
What computer operating system is your Premiere Elements running on?
With your Publish+Share/Disc/AVCHD can you burn to folder successfully for AVCHD on DVD disc?
Just before you were ready to start the burn to AVCHD on DVD disc, In the Quality Area of the burn to AVCHD on DVD, what are the readings for Space Required and Bitrate (with and without a check mark next to "Fit Content To Available Space"?
Please review your Scratch Disk situation (locations and free space at the locations). See Edit Menu/Preferences/Scratch Disks as well as the contents of the project's files/folders in the 12.0 Folder in Libraries/Documents/Premiere Elements (if Windows).
Are you running from a User Account with Administrative Privileges + Run As Administrator?
And have you explored other disc brands as well as types?
More later.
Thank you.
ATR

DVD Superdrive keeps ejecting discs

My trusty old PB G4 has just started to eject discs from the dvd superdrive. I've tried various discs (mainly cd-r) but for some reason it squeaks and squawks then ejects the disc????
Could this be a media problem or perhaps.......a hardware problem?
Any thoughts gladly appreciated.
Dan

I'm having this problem with my 2.5 Penryn Macbook Pro
And I had the same problem with my last mac which was a 2.8 24" silver iMac.
I took it to be repaired, they replaced the superdrive, and then I sold it on. But now the person i sold the iMac to is saying they are having the same problem.
It must be a fault with Apple's superdrives. My external firewire slot loading burner works perfectly.
Unfortunately I'll have to use that and wait until I buy my next mac before i can take this one in to be repaired. Hopefully they dont just replace the drive with another one of the same model.
I found a solution for this problem with old powerbooks:
http://bura-bura.com/blog/archives/2005/07/11/a-fix-for-my-superdrive-problems/
But no success with my MBP

Ejecting Disc 2 following Instal of PS10

Similar Messages

Maybe you are looking for