Ejecutar procedimientos almacenados sql server

Hola buenas tardes.
estoy invesigando sobre labview, y se que se pueden hacer consultas a bases de datos sql directamente desde labview.
pero no he tenido suerte en encontrar si es posible ejecutar procedimientos almacenados sql server,
Gracias.

Saludos alfred2611,
Gracias por utilizar los Foros de Discusión de National Instruments, efectivamente es posible ejecutar procedimientos almacenados SQL server utilizando LabVIEW, puedes utilizar el Database Connectivity Toolkit de LabVIEW para ello, los siguientes links contienen ejemplos de esto:
How Do I Get Return Values of Stored Procedures in the Database Connectivity Toolkit?:
http://digital.ni.com/public.nsf/allkb/9EDDED1E89054FEA86256DB400551780
How Do I Set Input Parameters and Get Output Parameters from an SQL Stored Procedure with the Database Connectivity Toolkit?:
http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4
Quedo al pendiente de tu post, saludos.
David P.
National Instruments
Applications Engineer
www.ni.com/soporte

Similar Messages

SBO-COMMON no creo procedimientos almacenados.

Buenos días a todos,
Mi tema es que instale SAP 9 PL05 con SQL Server 2012 y al momento de que el instalador de SAP crea la SBO-COMMON con las bases de pruebas y me envió unos mensajes de que no se creo algunos procedimientos almacenados y al abrir SAP Client no me permite ver las bases de pruebas para conectarme, y quería saber si alguien sabe como solucionar este tema?.
P.D.: Ya verifique que los servicios SQL esten iniciados e incluso probé creando una base de pruebas desde SAP Client y creo la base pero no se pudo ver en la barra del proceso la creación de la base, pero si uno va al SQL Server si se creo la base.
Gracias y atento a sus comentarios y ayuda.

Bueno la del master sale otra en la que te adjunto una imagen
Pero en otro servidor con SAP 9 PL09 HPTFIX1 con SQL Server 2008 R2 el master esta igual que en la imagen y el COMMON esta con el Latin1_General (SQL_Latin1_General_CP850_CI_AS) y en ese servidor funciona bien y si muestra las bases de datos. Sera el servidor SQL 2012?.
Atento a tus comentarios.

Error en Query : [SQL Server] Error de Division entre 0

Maestros !!
Tengo este problema:
Al ejecutar una query me figura este error " [SQL Server] Error de Division entre 0 ". Entiendo el error, cualquier numero divido por 0 arroja este problema, mi pregunta es como lo hago para no considerar las operaciones con resultado 0. Al revisar las operaciones que esta resumiendo la funcion AVG existen operaciones con resultado 0.
La query es la siguiente:
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 01'
INTO #FV01 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='01'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 02'
INTO #FV02 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='02'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 03'
INTO #FV03 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='03'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 04'
INTO #FV04 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='04'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 05'
INTO #FV05 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='05'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 06'
INTO #FV06 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='06'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 07'
INTO #FV07 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='07'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 08'
INTO #FV08 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='08'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 09'
INTO #FV09 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='09'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 11'
INTO #FV11 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='11'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 12'
INTO #FV12 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode IN('12','12A','12B','12C')
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 14'
INTO #FV14 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='14'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 20'
INTO #FV20 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='20'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 221'
INTO #FV21 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='221'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 22'
INTO #FV22 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='22'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT T3.FirmCode, T3.FirmName, SUM(T1.Quantity) as 'Cantidades', AVG(T1.Price) as 'Precio Venta Promedio', AVG(T1.StockPrice) as 'Costo Promedio', SUM(T1.LineTotal) as 'Venta Neta', AVG((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100) as 'Margen Almacen 23'
INTO #FV23 FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T2.ItemCode = T1.ItemCode LEFT OUTER JOIN OMRC T3 ON T3.FirmCode = T2.FirmCode
WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]' and ISNULL(T0.Indicator,'') <> 'NL' and T0.DocType ='I' and T1.WhsCode ='23'
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
---SELECCION DE DATOS
SELECT T3.FirmCode, T3.FirmName as 'Proveedor',
(Select T201.[Margen Almacen 01] From #FV01 T201 where T201.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 01',
(Select T202.[Margen Almacen 02] From #FV02 T202 where T202.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 02',
(Select T203.[Margen Almacen 03] From #FV03 T203 where T203.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 03',
(Select T204.[Margen Almacen 04] From #FV04 T204 where T204.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 04',
(Select T205.[Margen Almacen 05] From #FV05 T205 where T205.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 05',
(Select T206.[Margen Almacen 06] From #FV06 T206 where T206.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 06',
(Select T207.[Margen Almacen 07] From #FV07 T207 where T207.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 07',
(Select T208.[Margen Almacen 08] From #FV08 T208 where T208.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 08',
(Select T209.[Margen Almacen 09] From #FV09 T209 where T209.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 09',
(Select T211.[Margen Almacen 11] From #FV11 T211 where T211.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 11',
(Select T212.[Margen Almacen 12] From #FV12 T212 where T212.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 12',
(Select T214.[Margen Almacen 14] From #FV14 T214 where T214.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 14',
(Select T220.[Margen Almacen 20] From #FV20 T220 where T220.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 20',
(Select T221.[Margen Almacen 221] From #FV21 T221 where T221.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 221',
(Select T222.[Margen Almacen 22] From #FV22 T222 where T222.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 22',
(Select T223.[Margen Almacen 23] From #FV23 T223 where T223.[FirmCode] = T3.FirmCode) as 'Margen Venta Local 23'
INTO #RESULT FROM OITM T2 LEFT OUTER JOIN OMRC T3 ON T3.FirmCode =T2.FirmCode
GROUP BY T3.FirmCode, T3.FirmName
ORDER BY T3.FirmName
SELECT * FROM #RESULT where isnull([Margen Venta Local 01],0) <> 0
or isnull([Margen Venta Local 02], 0) <> 0
or isnull([Margen Venta Local 03], 0) <> 0
or isnull([Margen Venta Local 04], 0) <> 0
or isnull([Margen Venta Local 05], 0) <> 0
or isnull([Margen Venta Local 06], 0) <> 0
or isnull([Margen Venta Local 07], 0) <> 0
or isnull([Margen Venta Local 08], 0) <> 0
or isnull([Margen Venta Local 09], 0) <> 0
or isnull([Margen Venta Local 11], 0) <> 0
or isnull([Margen Venta Local 12], 0) <> 0
or isnull([Margen Venta Local 14], 0) <> 0
or isnull([Margen Venta Local 20], 0) <> 0
or isnull([Margen Venta Local 221], 0) <> 0
or isnull([Margen Venta Local 22], 0) <> 0
or isnull([Margen Venta Local 23], 0) <> 0
---FIN
Agradeciendo vuestra ayuda.

Buenas Tardes Eloy
Al revisar todas las transacciones una a una, ninguna de ellas en el campo T1.LineTotal tiene como resultado el valor 0 ya que el campo T1.LineTotal es el monto neto de la venta (sin impuestos) y este nunca es 0 ya que tenemos validaciones antes de crear el documento.
El valor 0 aparece como resultado de esta operación ((1-((T1.Quantity*T1.StockPrice)/T1.LineTotal))*100), ya que en varios ventas se vendió al mismo precio del costo del producto debido a promociones o liquidaciones de stock, por lo tanto el resultado 0 en dicha operación es correcto.
Cuando a estas operación le aplico la función AVG para resumir datos comienza el problema.
Que me sugieres que realice?
Agradeciendo tu ayuda.

Forms : Bloques basados en procedimientos almacenados

Hola,
Estoy utilizando FORMS 5.0 (server), plataforma WINDOWS NT 4.0.
Los bloques que construyo estan basados en procedimientos
almacenados, hasta el momento no he podido encontrar la forma de
realizar una consulta que simule la consulta original de forms
sobre tablas, estoy utilizando un paquete con los procedimientos
de consulta, insertar, borrar, actualizar y bloquear. Donde
encuentro documentacin suficiente sobre esto ?.
Gracias.
null

Ne diyorsun kardesim ???
Carlos Mario Toro F. (guest) wrote:
: Hola,
: Estoy utilizando FORMS 5.0 (server), plataforma WINDOWS NT 4.0.
: Los bloques que construyo estan basados en procedimientos
: almacenados, hasta el momento no he podido encontrar la forma
de
: realizar una consulta que simule la consulta original de forms
: sobre tablas, estoy utilizando un paquete con los
procedimientos
: de consulta, insertar, borrar, actualizar y bloquear. Donde
: encuentro documentacin suficiente sobre esto ?.
: Gracias.
null

Unable to capture SQL Server Schema

I am trying to capture SQL Server 2005 demo schema (AdventureWorks). It does shows the numbers of Tables/Indexes captured..but finishes with this error..
Error ocurred during capture: Exhausted Resultset
Column not found. Skipping index detail on index 'IX_StoreContact_ContactTypeID'
Column not found. Skipping index detail on index 'IX_StoreContact_ContactID'
Column not found. Skipping index detail on index 'AK_StoreContact_rowguid'
Column not found. Skipping index detail on index 'IX_ProductVendor_VendorID'
Column not found. Skipping index detail on index 'IX_ProductVendor_UnitMeasureCode'
Column not found. Skipping index detail on index 'IX_Address_StateProvinceID'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'AK_Address_rowguid'
Column not found. Skipping index detail on index 'AK_Department_Name'
Any help is appreciated..
Ajay

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

How do I connect to SQL Server with Muse?

I want to query items from database and load it back to front end. Is there a way Muse can connect to sql server database?

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

I am trying to have access tables of the Sql Server through the Oracle

I am trying to have access tables of the Sql Server through the Oracle and this being occurred the error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
Please set it in init <orasid>.ora file.
ORA-02063: preceding 2 lines from HSMSQL
I created the ODBC with name HSMSQL.
I made all the configurations in the archives
tnsnames.ora:
HSMSQL=
(DESCRIPTION=
(ADDRESS= (PROTOCOL = tcp)(HOST = wsus)(PORT = 1521))
(CONNECT_DATA =
(SID = HSMSQL)
(HS = OK)
listener.ora:
(SID_DESC = (SID_NAME=HSMSQL)
(ORACLE_HOME= C:\oracle\ora92)
(PROGRAM =hsodbc)
initHS_SID.ora:
HS_FDS_CONNECT_INFO = HSMSQL
HS_FDS_TRACE_LEVEL = OFF
-- Create database link
create database link HSMSQL.US.ORACLE.COM
connect to TESTE identified by TESTE2
using 'HSMSQL';
But when I execute query the error occurs:
Select * from TabTeste@HSMSQL
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
Please set it in init <orasid>.ora file.
ORA-02063: preceding 2 lines from HSMSQL
Please they help me, thanks, Paulo.

Hi,
It seems that your configuration is Ok. By the way, the workaround for this error is:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for ODBC][H001] The environment variable <HS_FDS_CONNECT_INFO> is not set.
* Set HS_FDS_CONNECT_INFO in the hs{sid}init.ora file to the data source name.
Example: HS_FDS_CONNECT_INFO = <ODBC DataSource Name>
* Make sure the hs{sid}init.ora file exists in the ORACLE_HOME/hs/admin directory and has the same name as the SID in the LISTENER.ORA.
Example: If SID=hsodbc in the listener.ora file, then the hs{sid}init.ora file would be named ORACLE_HOME/hs/admin/inithsodbc.ora
For more information see if this [url http://forums.oracle.com/forums/thread.jspa?forumID=61&threadID=576975]thread can help you.
Cheers

Interface with SQL server

Hi,
I want to get data from SQL server on demand from SAP server and run a report in SAP.
Can anyone help me how to get data from SQL server?
Thanks,
Ashok.

Ashok,
I am not sure how it is done for SQL server, but here is a thread that discussed about a similar requirement with a Access database. Take a look.
SQ02 SAP Query
Regards,
Ravi
Note : Please mark the helpful answers

How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
Put the Data Flow Task within the Foreach Loop Container
Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
And that's when I run into trouble...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
Thanks for your review and am hoping and praying for a reply and solution.

Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Creating the report in BI Publisher with SQL SERVER 2008

Dear Team,
I want to create report on BI Publisher....i am able to create report with the help of oracle database ...but i dont'nt know how to create DATA MODEL in sql server 2008 ...
plz tell me the wright way....
Thanks,
Him..

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Restoring a SQL Server 2005 DB to a SQL Server 2014 install, is there any way to prevent it from being upgraded

Does anyone know if there is a flag I can use to prevent a SQL Server 2005 database from being upgraded to SQL 2014 when it is restored to a 2014 instance?
Don't ask why, I just need to know if this is possible or if 2005/8 DB's are required to be upgraded if they are going to run on SQL 2012/2014 instances. The documentation seems to say this is so, I just want to verify that.

First: You cannot directly restore a 2005 database to
2014. MS supports migration over 3 SQL Server version steps; means you can restore 2005 to 2008/2008R2/2012, but not to 2014. You have to do a migration step between.
Olaf I was looking for this today, because I'm working with a new customer that have SQL 2005 and I have SQL 2014. And needed to restore a backup form the production server in my test server.
When I read what you write I think, oh no!! I have to install SQL 2012 in my server. But that it's not an option for me, and I say let me try to restore the DB first in 2014 and if not work install 2012.
You can restore a 2005 database to 2014 directly, and it works.
For reference the version number in the servers 2005 (9.0.4035 SP3) and 2014 (12.0.2000 RTM)
This is not related in any way to the original question that you answered (the file format will be upgraded to the new motor, that is sure).
I put this lines because in the future there will be some people searching about if possible to restore a 2005 DB to 2014, and like me will read your lines and think it's not possible and that can make a decision to buy 2012 and not 2014 to that new server they
will migrate.
Don't forget to mark the best replies as answers!

Having issues with getting SQL Server Express to start services and run.

Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Ejecutar procedimientos almacenados sql server

Similar Messages

Maybe you are looking for