EK00 not triggered for batch split items

Hi experts,
I have configured output type EK00 for picking List, here's what I've done,
1)V/38: Verified O/P type EK00.
2) OVLT: assigned shipping point to o/p type.
3) VP01SHP: maintained print parameters for shipping point.
It works fine for non- batch managed materials, but when I have an item with Batch split, the Pick list is not being triggered, can anyone help me identify if I am missing something in the config related to the batch management & picking?
Thanks in advance for your time.
Kris T

Normally, it should work for both bath main item and batch split item.
Please check the batch split items:
- what's the item category. Is it relevant for picking?
- what's the plant / sto.loc. in batch splite items? Is it assigned to a WM?
- What's the value in LIPS-KOMKZ field for the batch split items? (EK00 is valid only when komkz = A).

Similar Messages

Quality certficates for batch split items in delivery

Hi Masters
How to make the output determination for outgoing quality certificates to select the output type LQCB
for batch split items in Delivery.
What is the routine to be selected in the output determination to map this scenario?
Regards
Mohan

Hi Masters
My problem is When i create a delivery for the items with batch split, the output type LQCB is not determined ie., not automatically get assigned in the delivery item.Hence the delivery items are not listed while executing T code QC20/
What am I missing?
-mohan

VPRS condition currency for batch split items

Hi,
i did the config for billing main item only in my delievry. that is batch split items will not be billed separately in billing.
before doing the above change, the currency of VPRS was appearing as document currency but after doing the above config, the currency of VPRS is changed to material valuation currency.(i.e taken from material master)
what is to be done so that currency for vprs in case of billing of main items shud be equal to document currency.
if there is no batch split, there is no issue of currency. if there is batch split in delivery and i bill only main item, vprs currency gets changed to material master currency.
regards
sac

Normally, it should work for both bath main item and batch split item.
Please check the batch split items:
- what's the item category. Is it relevant for picking?
- what's the plant / sto.loc. in batch splite items? Is it assigned to a WM?
- What's the value in LIPS-KOMKZ field for the batch split items? (EK00 is valid only when komkz = A).

Update picking quantity in delivery for batch split items

Hi,
I'm trying to use the function module WS_DELIVERY_UPDATE to update the existing deliveries. I'm able to do batch split for the items in delivery using the same FM. I have also requirement to delete these items (batch split items).
To delete these items first we have to make quantities to zero. So I'm able to make delivery quantity of these items to zero but not picking quantity.
If we do not make picking quantity also zero it will not allow to delete these items
and gives an error message saying "item is already made available for transfer order".
Could some one let me kow how to make picking quantity also zero for batch spit items using FM.
Thanks

Hi Vikram
To nullify the Picking Quantity, we can use FM: <b>SD_DELIVERY_UPDATE_PICKING</b>.
Parameters to be passed:
VBKOK_WA
-- VBELN_VL - Delivery Number
-- VBELN - Sales Document Number
SYNCHRON - 'X'
VBPOK_TAB
-- VBELN_VL - Delivery Number
-- POSNR_VL - Delivery Item Number
-- VBELN -- Sales Document Number
-- POSNN -- Sales Document Item Number
-- MATNR -- Material Number
-- LFIMG -- '0.000'.
Have tried this in both cases whereby we have partial picking done and full picking done and worked for both cases.
Please try on your end too...
Hope this helps.
Regards
Eswar

Item condition repeating in Invoice for Batch split items-V Urgent

Hi Guys,
My Sales order has one line item
One Item condition is there in the pricing procedure, it brings the value as the relevant condition record is existing.
Batch split is happening in delivery and because of which the order item is splitting into two lines, the main item is showing the quantity as zero, and the batch split item is holding the entire quantity in the delivery document..
When this delivery is converting into billing, the invoice is showing two lines, and is bringing the condition both for the main item (zero quantity), and for the batch split item (with full quantity).
Now because of this the customer is being charged twice by way of this condition type which is repeating in both the line items.
Ideally, for the main item which has the quantity as zero, this condition should not come. It should rather appear for the item which holds the full quantity.
How can correct this, pls let me know.
Many Thanks,
Regards,
Vivek

summarize the batch split into the main item: use Billing quantity flag = G in copy control tcode VTFL.
Roberto

Update picking quantity in delivery (Batch split items) using function modu

Hi All,
I need to update a picking quantity with zero value in delivery for batch split items (Item numbers start with 900001. etc).I'm trying to use WS_DELIVERY_UPDATE
and SD_DELIVERY_UPDATE_PICKING. I'm passing parameter VBKOK-KOMUE , and all other details, but it is not updating.
I'm able to update delivery quantity of same item with zero value but not picking quantity.
Could you please let me know how to achive this.
Regards
Vikram

I think the number 900001is mean batch split line item.
example:
In Deivery Note:
Item 10
     Batch 900001
     Batch 900002
Item 20
     Batch 900003
     Batch 900004
That right,

There are still batch split items with quantity X for item

Our current system is ECC6. The deletion of item in the delivery (TO
confirmed) is different before ECC6 (4.6C). In 4.6, unless quantity of
batch split items are zeroed out in the delivery, the item cannot be
deleted. Message "There are still batch split items with quantity X for
item" is encountered. In ECC, line item can be deleted even batch split
items are not 0. The message doesn't exist in ECC6.
Please advise how to activate this message.

In ECC6, the logic has been completely changed during item deletion.
Now, there is no way to activate the message VL224 when deleting batch item.
In 46c,
FORM XLIPS_LOESCHEN_PRUEFEN is called with XL_ERROR = 'X'.
Main program     SAPFV50P
Source code of   FV50PFLP_XLIPS_LOESCHEN_RC
FORM XLIPS_LOESCHEN_RC
           IF IF_TABIX IS INITIAL.
             REFRESH LT_REASONS.
             PERFORM XLIPS_LOESCHEN_PRUEFEN TABLES   LT_REASONS      <<<<<<
                                            USING    LF_POSNR
                                                     CHARX        <<<<<<<
                                                     IF_ALL
                                            CHANGING LF_EXIT.
In ECC6,
The FORM is called with XL_ERROR = SPACE. That's why the error is not issued.
Actually, they are called from different place in ECC and 46c. The logic has been completely changed.
Main Program     SAPMV50A
Source code of   MV50AF0D
FORM DELETE_ITEMS_CHECK
           perform xlips_loeschen_pruefen(sapfv50p) tables   ct_reasons   <<<<<
                                                    using    ls_admin-posnr
                                                             space
                                                             space   <<<<
                                                             'GHK' "n_766525
                                                    changing lf_exit.

Item Category for Batch Split Line

Where do I change how SAP determines the batch split item category? Currently it is defaulting to an different item category than I intend.
Thanks.

Hi Mark,
In your delivery item category determination you should maintain as below
Document type : Document Type for which you are doing delivery
Item category Group : Item category Group for which you are trying to make batch split.
Usage : Should be CHSP
Higher Level Category : Determined item category for the combination of document type and item category group.
For the above combination define item category.
Rewards points if it helps.
Regards,
Sreekanth

Validation on line items not triggering for MR41 tcode

Hi,
I have to put a validation on MR41 to check the amount entered on the screen. I am using OB28 to define the validation. Also, I have created user exit in the validation/substitution program where the necessary checks are done. But the validation is not triggering at the line item level. I have another validation of MR41 at header level, that is working perfectly. I want the validation to trigger at line item level also.
Any ideas on how to do it?
Thanks in advance.
Regards,
Arun Mohan

Hi,
Try with user exit MM08R002 under this u can find thease exits.
EXIT_SAPLKONT_002
EXIT_SAPLMR1M_001
EXIT_SAPLMRMC_001
<b>Reward points</b>
Regards

Printing mataerial description for batch split material at delivery level

Hi all,
Here i am printing the material description which is maintained in the item level at sales order level.For each material they have maintained two material descripption.I am not able to display the second material description in my export invoice whenever the material is splited into batch ie batch split at delivery level. so please can anyone help me regarding this, I am not able to get it from long time.
Regards,
madhu

Hi,
You can create a two folders for printing the line items, one folder for the normal line-items and the other folder for printing the BAtch-Split Items. you can do this by putting condition as UEPOS NE 0 or UEPOS EQ 0. You can include the Item-Description of the Batch-Splitted item in the Corresponding folder, so when there will be a batchsplit it will get printed.

No Single batch split item created in delivery during picking

Hello,
When there is only one batch split item, SD_DELIVERY_UPDATE_PICKING is not creating batch split item (90001) if delivery quantity is equal or less than picking quantity...I didi search for SAP Note (1360407) and found one which is applicable only to P3A Component.
Instead of batch split it updates at item level itself. Now if again i post an IDOC with 2 batch split, then it adds both picking quantity and update the same line item itself.
This is much worse. Any one faced this issue before???
Thanks to update me
Regards
Hari

When the batch is the same, regardless of the number of times the same batch is picked, the update to the delivery will be to the same header line item. The batch split (delivery line split with parent and child line items) will occur only when there are multiple batches picked against the same header line item. Since this behavior is standard SAP I'm doubtful that this can be changed via an exit or BADI (I couldn't find one to influcence this).

Batch Split Items appearing in the billing document

Dear Friends,
Batch determination is active in our system. In the delivery there are two main items. 10 and 20 and each has Batch split and the sub items are 90001 and 90002 respectively.
Now in the billing document there appears are four items with item nos and qty as follows.
item 10 qty 1 - main item having pricing etc
item 20 qty 0 - batch split item no qty n no pricing
item 30 qty 1 - main item having pricing etc
item 40 qty 0 - batch split item no qty n no pricing
The requirement is that there should not be any sub items with zero qty. Only main items to appear in the Billing document.
One important observation I would like to share with you is that in the delivery document both main items and it's sub items have item category as TAN.
Your help is appreciated.
Regards,
Vishi
Edited by: Vishi19 on Apr 27, 2009 2:48 PM

Dear US,
Thanks for replying.
What i would like to know here is if appearance of sub items with 0 qty n 0 price does not affect in the billing document then how come VPRS cost coming only in the item conditions of the sub items. I dont see the cost in the main items.
What I want to knlow here is that does in any way these sub items affect the billing document? i mean in the accounting or data flow to CO-PA or something like that..?
Regards,
Vishi.

Inserting Batch Split Items in Delivery

Hi Folks,
a very quick question. I was mining for info to get the batchsplit items inserted into an Outbound delivery thru the FM WS_DELIVERY_UPDATE sometime ago. Out of doubt and tight schedule I had to opt for BDC which is not that elegant and I would like to know if anyone of you gurus has managed to insert batch split items for a normal item in a delivery. A sample piece of code would be just what I am looking for, suggestions are invited
thanks a lot in advance.
ZAM

Hi ZAMUser,
I have played with batch-split Items, this is a little part of the code. In this code I try to update quantity of the delivery. Maybe that will help you
Regards
Frédéric
(comments are in french, and I play with special messages and text)
*   Livraison
    refresh wlt_btc.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '4004'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '/00'         to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'LIKP-VBELN'    to wlt_btc-fnam ,
           wlt_badge-vbeln to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   PoPo.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '1000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=POPO_T'     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Poste.
    if wlt_badge-uecha eq '00000000'.
      move wlt_badge-posnr to wlv_poste.
    else.
      move wlt_badge-uecha to wlv_poste.
    endif.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '0111'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=WEIT'       to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'RV50A-POSNR' to wlt_btc-fnam ,
           wlv_poste     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Marque le poste
    move : 'SAPMV50A'    to wlt_btc-program ,
           '1000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=CHSP_T'     to wlt_btc-fval .
    else.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=IDET_T'     to wlt_btc-fval .
    endif.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_CURSOR'     to wlt_btc-fnam ,
           'LIPS-POSNR(01)' to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
*     Recherche le sous poste.
      move : 'SAPMV50A'    to wlt_btc-program ,
             '3000'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=POPO_T'     to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
*     Sous Poste.
      move : 'SAPMV50A'    to wlt_btc-program ,
             '0111'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=WEIT'       to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
      move : 'RV50A-POSNR'   to wlt_btc-fnam ,
             wlt_badge-posnr to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
*     Marque le sous poste
      move : 'SAPMV50A'    to wlt_btc-program ,
             '3000'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=CDET_T'     to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_CURSOR'     to wlt_btc-fnam ,
             'LIPS-POSNR(01)' to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
    endif.
*   Onglet Qtt
    move : 'SAPMV50A'    to wlt_btc-program ,
           '3000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=T04'       to wlt_btc-fval .
    else.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=T05'       to wlt_btc-fval .
    endif.
    append wlt_btc.
    clear wlt_btc.
*   Mise à jour Qtt livrée
    move : 'SAPMV50A'    to wlt_btc-program ,
           '3000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=SICH_T'     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'LIPS-LFIMG' to wlt_btc-fnam ,
           wlv_poids     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Appels du call transaction.
    call transaction 'VL02N' using wlt_btc
                              mode 'N'
                              update 'S'
                              messages into wlt_error.
    sort wlt_error by msgid msgnr.
*   Binary search
    read table wlt_error
         with key msgid = 'ZTPL'
                  msgnr = '011'
         binary search.
    if sy-subrc eq space.
      message i011(ztpl) with wlt_error-msgv1 wlt_error-msgv2.
    else.
      read table wlt_error
           with key msgid = 'ZTPL'
                    msgnr = '010'
           binary search.
      if sy-subrc eq space.
        message i010(ztpl) with wlt_error-msgv1 wlt_error-msgv2.
      else.
*       Pas de binary search pour la recherche d'erreur
        read table wlt_error
             transporting no fields
             with key msgtyp = 'E'.
        if sy-subrc eq space.
          message i398(00) with text-e01.
        else.
*         Mise à jours des masses dans les textes au niveau des postes
*         de livraison.
          concatenate wlt_lips-vbeln
                      wlt_lips-posnr
                      into wlv_tdname.
*         Masse net.
          move : 'VBBP'     to wls_thead-tdobject ,
                 wlv_tdname to wls_thead-tdname ,
                 'YP09'     to wls_thead-tdid ,
                 wlv_langu to wls_thead-tdspras.
          move : wlt_bascule-poids to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat .
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
*         Masse brut.
          move : 'YP07'            to wls_thead-tdid ,
                 wlt_bascule-poid2 to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat.
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
*         Tare.
          move : 'YP08'            to wls_thead-tdid ,
                 wlt_bascule-poid3 to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat.
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
        endif.
      endif.
    endif.

Batch split items in invoice

Hello Friends,
I have a delivery item with batch split and which consists of 5 batch split items. If i create an invoice from delivery , invoice is whowing all 5 batch split items as 5 line items in the invlice. User wants only the one item with full quantity should show in invoice.
Please guide me how to do this.
Thanks,
Ashok S

fyi,
-While Creating Invoice for Batch split material, System copies all the batch items including main item, where as, system should copy/combine all batch split items into Main item, batch split items should not be shown in different line items in Invoice.- ?
In copy control from the delivery type to billing type VTFL, for the item category maintain billing quantity as G. This will ensure that the batches are clubbed into single line item.
In Item Category of the Billing, goto VOV7 u2013 maintain billing relevance as u201CMu201D.
- Batch Management in STO, after creating delivery via VL10F, wrt: STO order, automatic batch determination is not happening for the batch managed material. But for the same Material, from SD it is working fine. System displays message as u201C No Batch search procedure assigned to the order typeu201D
In V/C5, batch has to assigned to the determination procedure in combination of Sales Org / Dist Channel / Division / Order type u2013 Search Procedure / Check batch indicator.
*Sales area should be taken from STO-ME22n, Shipping tab at item level.
*Order type should be, default Order type from the specific Delivery type eg:NL-
Item Category for STO main item : NLN / batch item: ULN, both has to be marked for automatic batch determination indicator in IMG-LG-Batch Mgmt u2013 Batch detu2019n & Batch check u2013 Automatic batch detu2019n in SD u2013 Activate Auto. Batch detu2019n for Delivery Item Catu2019s
After following above procedure, system displays error message as u201C Item Category is not maintainedu201D
-Tcode:0184-Delivery item cat detu2019n
Maintain entries as u201CDel type/Item cat group / Item Usage / High. Item Cat- Default, Item catu201D
Eg: NL u2013 NORM u2013 CHSP -= ULN
CHSP u2013 Batch split item.
NOTE: Copy Controls from Delivery u2013 billing at item level u2013 ULN should not be maintained.

Creating Batch SPLIT items via WS_DELIVERY_UPDATE

HI,
I try to create batch split items into an inbound delivery. It works fine, but now we decided to have only one split item per material/batch.
Now I've got the problem, that calling the ws_delivery_update from same screen several times, it works only every second call. Means:
first call creates split item
second call runs on error
third call increases the split item amount, as it should do.
fourth call runs on error and so on...
I guess that I have problems with buffers, initialization or something like that.
Any ideas are welcome
Best regards
Patrick

Hi Patrick,
a very quick question. I was mining for info to get the batchsplit items inserted into an Outbound delivery thru the FM WS_DELI... sometime ago. Out of doubt and tight schedule I had to opt for Batch (direct input) which is not that elegant and I would like to know how you realised the batch split. A piece of code would be just what I am looking for.
thanks a lot in advance.
ZAM

EK00 not triggered for batch split items

Similar Messages

Maybe you are looking for