EK00 Output type issues

We have an issue with EK00.  We have the shipping points defined in VP01SHP but it does not create a EK00 for the shipping points.  What else could be wrong?
Regards,
Davis

I found the issue.  We had the wrong output type in OVLT.

Similar Messages

  • VL02N Output type issue.

    Hi,
    When I execute the tcode VL02N for any output type (ZEU5) for print preview and external mail then it is giving error that "Output could not be issued".
    I have also checked the config of NACE , it seems to be ok.
    So what are the other possibilities of this error.
    Thanking you in advance,
    Regards,
    Vikram

    Configuration of NACE does not make all the difference. The only way to come to the solution is to debug from point when button is clicked for print preview or etc.
    Possible reasons may be there calling program before making a call to script or smartform encountering a problem. It may be that program is not able to get the desired data correctly from the tables or some other problem(Mainly due to subrc not coming to be 0).
    Apart from this even if call is made successfully to the form but inside there could be problem like using command in smartform.
    Thanks,
    Mark

  • Multiple output types issue

    Hello,
    I configured two output types (Bill of lading & Packing list) for the application V7-transaportation. I am able to get both the outputs. Now, I am able to get a print for BOL and also a print preview. For Packing list I am able to see the screen view(print preview), but when I try to print it directly it gives me an error " output could not be issued" . When I go to Output-> screen it is showing me the output.
    I have maintained all the required print parameters and assigned the print profiles to the output types.Is there a problem with my configuration? can't I print two output types simultaneously?

    Hi,
    Is there a printer defaulted to your output types?  You can issue multiple outputs at the same time.
    If the output types have been determined in your document, then nothing wrong with the determination process.
    If the output can be previewed, nothing wrong with the SAPScript or Smartform.
    So maybe something to do with compatibility with the printer chosen.
    Phyllis.

  • Output type issue

    Hello,
    I have created new Z* output type and done all confirguration related to this.
    When trying to save this output type for one of the material doc.  in transaction  MB02 - >  Details & Messages, am getting below message
    "Express Document "  Update was terminated " received from author "User id" "
    When checked the same in SM13 transaction, following error message found :
    Class : J3R_LEGAL_FORMS
    Number : 022
    " Number range error: number could not be generated for number range J3R FORMS (01). "
    Is this realted to number range issue ? If so, how can i resolve this ?
    Appreciate your help.
    Thanks
    Nag

    Hi,
    Please check with ABAP , seems output Form assignment error , not sure
    Thanks
    Diwakar

  • PO Output Type Issue

    Hi Gurus,
               I created New Output Types for PO (PrintOut & Fax).The Output for the Printer is working fine and when i am trying to use the Output type for Sending the FAX,it is throwing an error that "Cannot Process Message,No route from XXXXXXXX to 08-000-0000".
               I have checked and all the configs are done properly for both the types.Please let me know the solutions for the error.Thanks in Advance.
    Thanks,
    Nambi.N

    Please check the config as per note 455140.
    The two steps I would advise you to take with this issue are:
    1) Confirm that the SAPConnect node you have configured for INT
       transmission is in use and
    2) Confirm that there is a valid address area set up in this node, for
       roger_xu@DP&UPTX.COM - for example '' or '@DP&UPTX.COM'
    Sanjeev

  • Propose Custom Idoc, output type issue

    Dear Experts,
    I want to populate a custom idoc(Idoc already existing) by proposing the output type in the purchase order for which I created a output type and made an entry in Application 'EF' (NACE),
    Also created a process code thru we41 and assigned both of these in the outbound parameters of the partner profile.
    But for some reason I'm getting an error while propsing and saving the purchase order, Is there a way that I can identify why the error occurred.
    Or can some one shed some light if I need to do any extra configuration if I'm playing with a custom Idoc.
    Thanks for all
    -Amit

    >
    Vinod Kumar wrote:
    > Have you done the partner profile configuration in WE20.  Have you mentioned message control? What is the exact error which is appearing while saving PO?
    >
    > Regards
    > Vinod
    Vinod,
       I did all the partner profile configurationand maintanied message control too, While saving I'm not getting any error, but after saving, if I go back to the output type and see the output is in Red coulor (Indicating failure), I'm not sure how to check where the error occured.
    Thanks
    -Amit.

  • JJ Form - Output type issue

    Hi Friends,
    I've created a JJ Form(Smartform) and it's to be called by material document number thru tcode MB02 or MB90.
    For this, My MM consulatnat has also created a new output type in ME-inventory management with my calling print output program 'RLE_DELNOTE' and my form name.
    But when calling the output thru Tcode MB02/MB90, the Form is not coming out and it saying output could not be found....and also in log, it says,
    Note: Log not from current processing run
    Processing log for program RLE_DELNOTE routine ENTRY
    There were no deliveries that matched the criteria you specified.
    FYI...
    If i assign my inventroy management calling program, it says the output could not be found and Processing routine in program ZMMSS0002 does not exist.
    (my smartform working fine while executing thru FM)
    Pls advise me, where i did the mistake and how to assing my calling print program and form routine.
    thanks & regards
    sankar.

    Hi,
    The print program: RLE_DELNOTE which you are refering is the right one? In mysystem it is been assigned to different output types like LD00 etc, which all comes under application V2 which is related to Sales.
    Where as Mateial document does not comes under Sales.
    Please check with your functional consultant, whether your have assigne the correct program, under correct application type.
    Cheers,
    Ashok

  • Version management output type issue

    hi,
    we have activated version management and all working fine .
    but while taking print out through ME9F we have assigned to 3 output types (NEU,ZNEU,ZNIU) for a single PO , until and unless we take print for 3 output tyes we are not able to amend the PO .we are getting the below error .
    "No new version created because a message has not yet been transmitted"
    is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU)   it should allow us to do changes in PO .
    please assist we need to close the requirement on priority .
    thanks in advance

    HI,
    is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU) it should allow us to do changes in PO .
    No i don't think so system will create new version.
    new version is created when you output PO completely
    try this create pool request for other two message in Message tab in PO in ME22N and then try PO it will work
    Regards
    Kailas Ugale

  • Clarifications in pick list output type EK00

    Hello ,
    Have any one of you used the pick list output EK00 . I have
    tried this and I do have some issues with
    We are using SAP R/3 4.7 x 200 version .
    Output type EK00 is not available in the application V2 (
    Shipping ) . Its available in application V4 (Shipping special
    case).
    1. I have assigned the shipping points through T code VOK2 as I
    am not able to find the output EK00 through customization menu.
    2. I have maintained the printers details through VP01SHP ( correct me if I am wrong) . I am using the standard program RVADEK01 and form
    SD_PICK_SINGLE in the output EK00.
    After doing the above setting when I am creating delivery in
    VL01N , the output type EK00 is not assigned automatically and
    when I try to assign it manually , it gives an error message
    "Processing program missing for output EK00 (medium 1)in
    application V2" . I dont know why the system is looking for
    application V2 when it is not available in V2 and only available
    in V4 .
    Am I missing anything in my process . Can some one help me in this .
    With regards,
    Joseph Anand.B

    Dear Joseph,
    Have you done the following setting in transaction v/38:
    1.On the Display View "Output Types": Overview screen, in the Output type group box, select EK00. (Application V4)
    2.In the left frame, under Dialog Structure, double-click on the Processing routines folder.
    3.On the Change View "Processing Routines": Overview screen, choose  .
    4.In the first medium, for Print output, enter the Smart Form print program /SMB40/RVADEK01 under Program and Smart Form /SMB40/SDPIK_L under SmartForm.
    Document Types        Picking List
    Output Types          EK00
    Transaction Code      v/38
    Smart Form Program    /SMB40/RVADEK01
    Smart Form            /SMB40/SDPIK_L
                          /SMB40/SDPIK_A
    5. Save the changes.
    Regards,
    Naveen.

  • Automatic triggering of output type in Goods issue

    Hello Experts,
    I am trying to pick the output type while creation of goods issue document using transaction MB1A. After creation, it is not coming automatically. I did the customization setting for maintaining conditions based on output type WA02, adding trans/Event-WA, print version-3, print item-1 but still it is not populating automatically while creation of GI document.
    Could you please let me know, how to do it or if i am missing some customization.
    thanks,
    Karun

    Hi,
    To trigger the OUTPUT automatically you have to maintain the CONDITION RECORDS in MN21
    Goto the Transaction code MN21 and enter the OUTPUT type as WA02 and give the following details
    Trans/Event type
    Print version
    Print item
    partner function
    Medium
    Date/Time
    Language.
    After maintaining this check whether the OUTPUT determined automatically or not.
    I hope it will determine automatically.
    thanks,
    santosh

  • Clarifications in picklist output type EK00 for transaction VL02N

    Hi evryone,
                      Can anyone please help me to generate a smartform for picklist output type EK00 for Tcode VL02N. In application V2 the standard program is  RVADEK01 and the form SD_PICK_SINGLE,
              what is the best way to create smartform and driver program , can I use the Standard Program or write the new driver program..
    with regards,
    Mittu

    I dont think this is the right forum to post such question.  This should have been posted in ABAP forum
    thanks
    G. Lakshmipathi

  • Script Form print issue with output type

    hello,
    i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
    output device is 'LOCL' "print immediately" and "release after output" are active in communication.
    a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
    after checked, custom script from caused this issue, but how to resolve this problem?
    best regards,

    Hello,
    The error ME142 can have different causes like missing authorizations
    or a terminated connection. Please see SAP notes 397691 and 532251. This note
    states that is errors occur when purchasing documents are output, If
    errors occur when purchasing documents are output, the system generates
    an error message in the message log of the message overview. However,
    error message ME142 'Error in OPEN_FORM for document &' contains only
    the information that an error occurred and not the error cause. With the
    attached source code, the error cause is also displayed in the error
    message.
    Regards,
    David

  • Multiple issue in output type

    Hello,
    we have output ZROS configured. No custom enhancements. Sandard EDI output us attached to it. In the config of output type, we have "multiple issue" ticked.
    1) what is the meaning of multiple issuing. does it mean, that whenever someone goes into delivery in change mode and goes out of delivery, system will give a pop up that delivery has changed and if we press save, then the output will be trigerred ?
    2) We have seen whenver the shipment is created for the delivery, then the transportation planning status  of delivery is changes (as per standard sap ), then we see that there is another output ZROS trigerred from delivery ? Why is the output Trigerred when transportation planning status is changed for the delivery  ?
    regards
    Pamela

    1. Once you check the 'Mulitple Issuing' box then it allows you to use more than once the same output type for the same partner.
    2. Answer is on your question itself, i.e., you have checked the 'Multiple Issuing' Check box for your output type so whenever you do changes in delivery so automatically same corresponding output type will be triggered.
    If you don't want this to happen for every delivery changes then you shouldn't check the box.
    Please try above the step to stop multiple output trigger.
    Anandkumar KS

  • Issue in Output type

    Hi,
    We are trying to do a PGI via IDOC.
    When we do that the output type is not created automatically in the delivery.
    Can anyone help on this?
    Regards,
    Ankur Parab

    Hi,
    Actually the issue is when we do PGI manually the output message gets determined automatically but when we do PGI via IDOC using basic type DELVRY05 it doesn't gets maitained.
    Condition records for output types were maintained. Please let me know if there is any note available for the same for ECC version.
    Regards,
    Ankur Parab

  • Issue output type

    Hi All,
    I've configured output type for sales order.output condition records are also maintained in VV11.
    It's workign fine when I create or change sales order in VA01 or VA02(Issues output type - yellow colour).In turn for this output type we have scheduled background job in WE15 which creates idocs.
    Now when I do PGI or create delivery for the order the same output type has to be proposed for the corresponding order.
    How can I do it?
    FM 'WFMC_MESSAGE_SINGLE'  cannot be used as this FM is triggering the output type to generate idoc directly(same like WE15 ;it generates idoc but no output type is found in SO), but what I need is it has to create output type in sales order with yellow colour.
    IS there any way to do this?Any BAPI or FM?
    Regards,
    Ponraj.s.

    Is there anyone have any updates on the above issue. need your help in this regards

Maybe you are looking for