'El Capitan' Beta Not Supported by SAV for OSX

Hey Everyone,
In the last couple weeks I've seen a few folks post about issues with the new beta release of OSX 'El Capitan' which was released a few weeks ago. Just wanted to pass on the official word that this beta is unsupported. Here's the official KB article.
In our experience:
A new install of SAV 9.2.7 on El Capitan is currently expected to fail
If SAV is installed and working prior to an upgrade to El Capitan, it "may" continue to work, but we can't guarantee anything.
Please remember, proceed with caution when installing a Beta OS, as we can't guarantee stability.
Our Mac development team is currently working on building and testing a new release of SAV which will be fully compatible and available prior to the official release of El Capitan later this fall.
Thanks everyone for your continued support and patience. Happy Friday!
 

If it's OK to pass this along, while the El Capitan beta won't normally allow SAV to run, and updates will fail if it's already present and working in an earlier version of OS X before the upgrade, in my experience the current version of SAV will run and update reliably if "System Integrety Protection" is turned off while booted into the El Capitan Recovery drive. See this article in MacWorld for an explanation of what that is and how to turn it off. Note that if System Integrety Protection was on when SAV was broken, simply turning it off won't bring SAV back to life. SAV needs to be reinstalled after System Integrety Protection is disabled, but as long as System Integrety Protection continues disabled, SAV so far has continued to work. While I don't recommend running the Mac that way, if it's the user's production drive (not a good idea with a beta OS), then it's a solution I'd use. Personnally, I consider Sophos AV important enough that I plan to upgrade from Mountain Lion to Yosemite rather than El Capitan for production purposes simply to have Sophos available and running. BTW, System Integrety Protection interferes with fully successful cloning too, which is another reason to hold off with production systems.

Similar Messages

  • Why, when MobileMe was shuttered, does Apple NOT support calendar subscriptions for iCal (Calendar)?  I upgraded to Mountain Lion and cannot migrate my Dutch, U.K., Islamic, or Catholic holiday subscriptions.

    Why, when MobileMe was shuttered, does Apple NOT support calendar subscriptions for iCal (Calendar)?
    I upgraded to Mountain Lion and cannot migrate my Dutch, U.K., Islamic, or Catholic holiday subscriptions.  I had a heck of a time getting my Detroit Tigers Baseball team schedules migrated (but Major League Baseball supported the subscriptions, so it occurred).  As I work internationally, having these calendar subscriptions on the new Calendar would be very useful.
    If one goes to the Apple site, and seeks calendars [http://www.apple.com/downloads/macosx/calendars/index1.html], they are shunted to MobileMe [https://www.icloud.com/mobileme/not_found/], with the note "MobileMe is closed. Go to iCloud."  But, I do not see how to get subscriptions from iCloud.
    Thanks.

    The problem is that many of these calendars were hosted on MobileMe. I actually tried about 20 at random, and only two worked! Not all of the failures were ex-MobileMe, some were on other servers but produced 'File Not Found'.
    Strangely, this one worked despite its URL:
    http://ical.mac.com/ical/UK32Holidays.ics
    Until the people who publish these calendars (it's not Apple, they are third-party) wake up and find alternative servers these calendars are not available.
    There may be other sources which work - try Googling.

  • HP UFT 12.02 does not support .object property for most of the objects in Chrome

    Hi ,
    Chrome Version : 39
    UFT Version : 12.02
    Does not support .object property for WebTable,webList and So on.
    It actually shows the native property in Object spy but when programatically we try to work on it, its unable to find the object.
    I Know that for Browser Object .object property is not supported.
    Regards,
    Ashfaq Dhanakwala

    You want the HP Enterprise Business Community and look in the Discussion Boards.
    Its the Forum for all things related to professional products like Servers, NAS, Procurve, ALM, etc etc.
    UFT was formerly known as QTP...
    Functional Testing/QTP - HP Enterprise Business Community
    Hope it helps.

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • Most SharePoint DBs are not supported with AlwaysOn for Disaster Recover?

    Hi ...
    I'm in the middle of testing and assessing DR site for our SharePoint MSQQL instance. I found a lot of talking about ALwaysOn. I try to figure it out. It is nice and easy, combine DR and HA in single
    solution- Wow.
    After proceeding with some research I shocked when found only content and secure databases are supported in Async mode for DR site. We have Fail-over cluster (old fashion with shared storage) , what
    the beneftis that will give me AlwaysOn in my case from building a DR point of view.
    We are running hyper-v and SQL 2012 

    Thanks Sean for your explaining the answer.  Actually I have many options, but the important thing as you said these things you wouldn’t play with. I need something is stable and strong without any complications.
    My options are
    User either AlwaysOn failover cluster OR  Old windows cluster for HA with log shipping for DR.
    For me this is supported and somehow acceptable.
    User either AlwaysOn failover cluster – Old windows cluster for HA along with AlwaysOn for DR as Async replica. Still not supported from Microsoft.
    We have already windows failover cluster with shared storage and I can go directly with log shipping for DR. However, still log shipping is not supported as DR for SharePoint but I’m going to make it as new instance and direct SharePoint farms to the DR
    site.  This procedure tested as moving database SharePoint instance to new server. It is worked well and straight forward.
    Again,  I cannot use AlwaysOn for SharePoint as DR while it is not supported (Contents and Secure is supported however as HA is fully supported).

  • Why does Verizon not support Windows 8 for wi fi?

    Why does Verizon not support Windows 8 for wi fi?  Are they planning on supporting Windows 8?
    Solved!
    Go to Solution.

    Verizon wi fi for hot spots does not work with Windows 8.  For verification go to FAQs about Verizon Wi-Fi for FiOS Internet, 
    http://www.verizon.com/Support/Residential/Internet/fiosinternet/networking/setup/wi-fi/124650.htm , and click on How do I know if my laptop or netbook is compatible with Verizon Wi-Fi? .  Verizon wireless home network does work well with Windows 8.
    Since you can't even download the wi fi for hot spots software if you have Windows 8, I don't know how to use compatability mode to get around the problem,

  • Hey guys, i have a one year old Mac desktop which has become incredibly slow over time. Strange thing is that I have not downloaded anything save for install Windows for Mac. Storage wise the bulk of my info is stored on hard external drives. Can someow

    Hey guys, i have a one year old Mac desktop which has become incredibly slow over time. Strange thing is that I have not downloaded anything save for install Windows for Mac. Storage wise the bulk of my info is stored on hard external drives. Can someow

    Hardware Information:
              iMac - model: iMac11,2
              1 3.2 GHz Intel Core i3 CPU: 2 cores
              4 GB RAM
    Video Information:
              ATI Radeon HD 5670 - VRAM: 512 MB
    System Software:
              Mac OS X 10.6.8 (10K549) - Uptime: up 0:2:53:43
    Disk Information:
              WDC WD1001FALS-40Y6A0 disk0 : (931,51 GB)
                        (null) (disk0s1) <not mounted>: 200 MB
                        Macintosh HD (disk0s2) /: 931,19 GB (894,98 GB free)
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. iPad
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Apple Computer, Inc. IR Receiver
              Apple Inc. Built-in iSight
    FireWire Information:
    Kernel Extensions:
    Problem System Launch Daemons:
                     [failed] com.apple.suhelperd.plist
                 [not loaded] org.samba.winbindd.plist
    Problem System Launch Agents:
                     [failed] com.apple.Kerberos.renew.plist
    Launch Daemons:
                     [loaded] com.adobe.fpsaud.plist
                     [loaded] com.microsoft.office.licensing.helper.plist
                     [loaded] com.rim.BBDaemon.plist
                     [loaded] com.zeobit.MacKeeper.AntiVirus.plist
    Launch Agents:
                     [loaded] com.rim.BBAlbumArtCacher.plist
                     [loaded] com.rim.BBLaunchAgent.plist
    User Launch Agents:
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              BlackBerry Desktop Software
              Bluetooth File Exchange
              Garmin ANT Agent
              Dropbox
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              GarminGpsControl.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Top Processes by CPU:
    Top Processes by Memory:

  • Mosib app not support in wifi for i phone6

    mosib app not support in wifi for i phone6

    today on wards again its not work.
    mosip app not support in wifi for i phone6

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

    Shouldn't the CC version be able to open any file created in an older version on InDesign?
    Yes, it ought to.
    If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
    The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

  • Apple El Capitan Beta 4 won't save outgoing POP mail server

    Oops... it's actually El Capitan beta 10.11 that I'm using. And I should also add that I've carefully copied the ingoing and outgoing ports and SSL info from GoDaddy, and as many times as I've typed all that in, I'm sure that not every effort contained a typo. I also went into Mail settings, per someone's suggestion, and changed "false" to "true" in the line: "allow unsecured...". It didn't seem to have any effect.

    Using the new Apple Mail program in 10.10 beta 4, try as I will, as many times as I will, checking then unchecking "Automatically detect..." (suggested by someone else), when I try to add my GoDaddy outgoing mail server to the list of those available, when I "save", and then go back, it's gone. Time after time after time. I can receive e-mail just fine, so I know I'm hitting GoDaddy's "pop.secureserver.net" just fine. It's hitting "smtpoutsecureserver.net" that I can't do, because I cant get this version of Mail to save the dang thing. HELP!!!!
    This topic first appeared in the Spiceworks Community

  • Image resize quality not saved in Save For Web Preset?

    L.S.,
    I have been working on an Action to create 12 separate PNG's for further use in my icon-software. What I do is basically this:
    Start out with a 256x256px image, save it for web four times in steps from 256, 48, 32 and 16px, (32-bit)
    apply some masks / layers, save it for web again four times from 256-16px,  (8-bit)
    set the mode to indexed colour / apply other masks and layers, and save it for web again from 256-16px. (4-bit)
    I let the sizing be done in the Save for Web step.
    The 256-sized pics give me no problem as they are not scaled down.
    The 32-bit pics give me no problem as they are scaled down, and antialias comes along, but they have 8-bit transparency: no problem.
    In the 8-bit and 4-bit versions from 48-16px, I definitely want no antialias in the sized down versions. So I set the resize quality to 'Nearest Neighbor'.
    However, Photoshop seems not to be able to remember different resize qualities in one Action.
    In every Save for Web-action that I do, when I set it to resize, it does so. But the resize quality is not taken from the setting. It seems to be taken from the last used or recorded setting.
    That is pretty annoying, because:
    - When I let the downscaled ones of the first 4, be downscaled 'bicubic sharper'
    - And I let the downscaled ones of the second 4, and third 4, be downscaled 'nearest neighbor'
    Next time I run the Action, all downscaling is done by 'nearest neigbor'. That ruins my downscaled 32-bit icons - they get jaggy.
    If I alter the steps in the action manually and set the first ones to 'bicubic sharper' again, suddenly all downscaled ones are done by 'bicubic sharper'.
    That ruins my downscaled 8-bit and 4-bit icons: they get antialias, to lime green, and that shows...
    I can save Presets in the Save For Web dialog, but as the groupbox already tells me: these presets only apply to the Image quality parameters, not to the sizing parameters. Those seem to be taken from the last run.
    I have one alternative to this: before every Save for Web step, I downsize the image myself, and undo the history step after saving. It's quite some work and I would just rather see that the sizing parameters saved in the Preset!

    That's never been saved as part of the S4W presets. Bloody annoying.

  • Looking for a better solution to the "Save for web" color shift issue

    Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
    But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
    Nothing new here.
    Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
    Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
    Anyone know of such a beast?   I would gladly pay for a plug-in that really works and fixes the problem.
    And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
    Anyone got a decent solution for this?

    Chris
    I spent all day Googling and doing side by side comparisons of my old and new systems.
    My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
    On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
    So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
    It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
    Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
    Thanks

  • Apple Care registration page does not support Safari 3 for Leopard

    I bought the apple care for my imac and was surprised to find Apple does not support their own browser for the online registration. I had to use firefox instead
    Visit
    http://www.apple.com/uk/support/register/
    on your leopard mac and click continue.
    I then got.
    For the best experience, please use a supported web browser.
    Mac:
    - Safari 2.x
    - Microsoft Internet Explorer 5.2 or later
    - Firefox 1.0 or later.
    Windows:
    - Microsoft Internet Explorer 6.0 or later
    - Firefox 1.0 or later.

    When you see this path:   /Library   That is your root Library.
    Open a Finder window.
    Select MacintoshHD in the Sidebar on the left then open the LIbrary folder then the Application Support folder, then InputManagers folder, the Receipts folder.
    For this path:  ~/Library/Application Support  (your Home library)
    The Tilde character ~ represents your Home folder.
    From that same Finder window select your Home folder in the Sidebar. It has a small house icon. Open the Library folder then the Application Support folder.
    Move all the Conduit/CT associated files you posted above to the Trash.
    Try Safari.
    I've yet to find the launchAgents.plist file in any Safari crash report in years. I don't think that's a problem.
    Another way to find files on your hard drive is to go to your Finder.
    From the menu bar at the top of your screen click Go / Go to Folder.
    Example. Type in:  /Library/ApplicationSupport   click Go
    Or type in:  ~/Library/Application Support   click Go

  • Characterset not supported by Outlook  for messages from JavaMail w/ html

    Hi, I have a Java mail program which works fine for text as well as small html content. But when the html content grew, my outlook tells me that the characterset is not supported and my message (from java) is an attachment instead of body of message. Besides that it also adds other mail headers (from the mail server) and adds other characters in the message so I cannot even filter out the data or look at it by saving it as html file.
    Whats going on?
    Heres my code for mail:
    try{
    String host = "mailserver";
    String from = fr; // this is passed as paramter
    String to = t; // this is also passed as parameter
    String subject = "Error occured in Process.";
    String content = cont; // cont is the message which is passed as string and contains html
    content = content.concat("\n\nNote:\n\nThis message was generated by manually running the program.");
    String attachmentFile = "c:\\grab.gif"; // file to be attached.
    String bodyOfAttachment = "<h3>This is the body of attachment.</h3>";
    Properties props = System.getProperties();
    props.put("mail.smtp.host", host);
    Session session = Session.getDefaultInstance(props, null);
    Message message = new MimeMessage(session);
    message.setSubject(subject);
    message.setFrom(new InternetAddress(from));
    message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
    MimeMultipart multipart1 =new MimeMultipart("alternative");
    BodyPart part=new MimeBodyPart();
    part.setContent(content,"text/html");
    multipart1.addBodyPart(part);
    BodyPart messageBodyPart = new MimeBodyPart();
    String htmlText = bodyOfAttachment;
    messageBodyPart.setContent(htmlText, "text/html");
    MimeMultipart multipart = new MimeMultipart("related");
    multipart.addBodyPart(messageBodyPart);
    messageBodyPart = new MimeBodyPart();
    DataSource fds = new FileDataSource(attachmentFile);
    messageBodyPart.setDataHandler(new DataHandler(fds));
    //messageBodyPart.setHeader("Content-ID","<"+"memememe"+">");
    multipart.addBodyPart(messageBodyPart);
    MimeBodyPart mbp = new MimeBodyPart();
    //Comment these two lines to not send attachment
    //--mbp.setContent(multipart);
    //--multipart1.addBodyPart(mbp);
    message.setContent(multipart1);
    Transport.send(message);
    catch (AddressException ae){
         ae.printStackTrace();
    catch (MessagingException me){
         me.printStackTrace();
    }

    Never mind I figured it out.
    replace all occurences of
    "text/html"
    with
    "text/html;charset=ISO-8859-1"

  • ClearParameters() not supported in jDriver for MSSQL

    I am migrating from weblogic 5.1 to 6.1 but i continually get exceptions thrown
    when I attempt to access CallableStatement returned from weblogic.jdbc.pool.Connection.
    I call clearParameters() from CallableStatement and get a
    "clearParameters is not supported by the underlying JDBC driver class weblogic.jdbc.pool.Connection"
    message from the exception. I am using WL 6.1 SP1 and MS SQL 7.0 database.

    The 6.1 server is making some generic jdbc 2.0 calls to make sure that
    any cached PreparedStatements are ready for re-use. Unfortunately our
    own driver doesn't support some JDBC 2.0 calls. The exception is
    caught and ignored, and harmless. Let me know if this makes it OK
    for you...
    Joe
    Rob Pak wrote:
    >
    I am migrating from weblogic 5.1 to 6.1 but i continually get exceptions thrown
    when I attempt to access CallableStatement returned from weblogic.jdbc.pool.Connection.
    I call clearParameters() from CallableStatement and get a
    "clearParameters is not supported by the underlying JDBC driver class weblogic.jdbc.pool.Connection"
    message from the exception. I am using WL 6.1 SP1 and MS SQL 7.0 database.

Maybe you are looking for