El proyecto no existe - After Effects CS6

Este es el error exacto:
Ya he probado guardándo el archivo en otra parte pero siempre es lo mismo, así sea con otro proyecto
Solo me sucede con el After Effects pero puedo abrir ese proyecto desde el after effects, osea abriendo primero el ae y luego arrastrando el proyecto, esa es la única manera y me parece muy tediosa :/
PD: He buscado si a otras personas les pasa y al parecer si , pero a ninguna le han dado solución,AYUDA!!
Gracias de antemano!

Hola, Tengo el mismo problema, encontraste una solución?

Similar Messages

Adobe After Effects CS6 takes FOREVER to lock existing frames before rendering

My After Effects CS6 locks up for 3 minutes "Locking Existing Frames" before it even begins to start rendering, every time I need to preview anything - even at the lowest possible quality.
The render goes perfectly normal - it is not the rendering that is the problem - it is the "Locking Existing Frames" process BEFORE rendering that freezes up my computer for 3 minutes, and ruining my life.
I am using Adobe After Effects CS6 on a Mac Book Pro with a 2.9 GHz Core i7 processor (2 cores) and 8 GB of RAM.
Please help me understand what is happening when it is "Locking Existing Frames," and what some solutions could be to reduce the amount of time it takes to do this.
ALSO: I have scoured the Web for hours looking for the answer to this problem, and to this point it has never been solved. If you can solve this issue, Adobe should give you a promotion and $1 million.

Hi Rick and Greg,
Thanks for the quick responses. Below are all the details to all your questions. Also - just to emphasize again - my rendering goes super awesomely fast. It is not the rendering. It is the "Locking Existing Frames" process before the rendering that is ruining my life.
FREE MEMORY:
This is brand new Mac Book Pro with hardly anything stored on it.
The 8 GB of RAM is split into 2 memory slots, each with 4GB of RAM
3RD-PARTY CODECS:
I am not aware of any third-party codecs in this system. I imported some fonts (ITC Franklin Gothic) and some video files (see below), but I am not aware of any third-party codec installed on this system.
DISC CACHE:
My Disc Cache is enabled
My maximum disc cache size is 69 GB
I do not have a seperate "fast hard drive" or "SSD" seperate from my main hard drive, where I store my footage.
MPEG SOURCE FILES:
If by source files, you're asking about the video files I imported:
2 MP4s (5 sec. each)
3 QuickTime .mov (3 sec. each)
1 Audio-only FLV. (2 minute background music throughout video; used to be a Premiere working file)
MULTIPROCESSING
Turned off, but still locks up forever before rendering.
ADDITIONAL FUN FACTS:
Here are some additional observations that might help:
It doesn't just take a long time to start rendering; it freezes my entire computer for the duration of the "Locking Existing Frames" process - putting my entire life on hold for 3 minutes, every time I need to preview a minor detail... It's a nightmare.
The video is 1 min. 45 sec. long so far, and has 15 sec. to go.
The video is comprised of 99 percent motion graphics, and 1 percent actual footage (Occupy Wall Street hates my footage)
The complexity in this video is that there are a lot of compositions inside of compositions inside of compositions, but even when I go to the very beginning of the first comp - where the only animation is a line being drawn with the "Stroke" effect - it still takes 3 minutes to "Lock Existing Frames."
Again... The rendering goes super fast after the "Locking Existing Frames" process. The problem is NOT with the rendering. The problem is the "Locking Existing Frames" process BEFORE the rendering starts.
This is my job and I can't do efficiently until I solve this problem, so I will be very responsive until we can identify the issue.
Thanks again for all your helpful responses!

Audio problem in Adobe After Effects CS6

When ever i import a clip into adobe after effects cs6 the program does not read my clips audio i know how to ram preview its just the program doesnt read the audio what so ever but when i preview the clip on my desktop using windows media player it works fine and you can here the audio. My clips are recorded by my HDPVR Haupauge and it records in m2ts file someone please help me this is a serious problem with this program

Hi,
When you installed the full version, DId it install "Over" the existing one, or is it seen as a new installation (Sorry, I have never re-installed AE, so I am not sure of the way it works) - but coming from an IT background, sometimes installing a bought version, will overwrite all user settings that were set up in the trial.
In other words, recheck all the program user properties and audio check boxes to make sure the re-installation did not reset something to "off".
There are a few Audio discussions going around today, check the forum and give them a quick read to get a reminder of where all the possible Adio "on/off" switches are hidden.
Hope that helps
Pierre

After effects CS6 error file cannot be imported - this 'moov' file is damaged or unsupported

Hi there,
I'm working in After Effects CS6 (11.0.2.11)
I imported an AAF that was exported from Avid MC 6.5.2. I colour corrected and graded the sequence using colorista 2 and magic bullet looks and some other native AE FX.
Before exporting I decided to double check something to do with the audio. I imported the same AAF into FCP 7, took a quick look, but decided nothing needed to be done. I tabbed back to AE (which was left open), and upon returning, AE started giving me all these 'damaged or unsupported' errors.
Subsequently, AE will now not import any quicktime movies - even ones I rendered out of after effects earlier in the day (these quicktimes use ProRes422 codecs, animation codecs and other lossless codecs)
I've restarted, re-exported the AAF several times using diff settings, uninstalled perian... but to no success.
Anyone got any good ideas? I've had this happen before, where AE will import an AAF and it works first time no problem. Then something happens when I re-open the project and boom... 'moov' errors. It's really odd and very annoying - esp since it now won't import other normal quicktime movies too - with the animation codec. I have quicktime 7 pro installed and quicktime X on Mountain Lion (OS 10.8.3).
-Rich
Editor,
Caravan Media, New Zealand
System Details: MacPro (OS10.8.3) 2 x 2.93GHz 6-Core Intel Xeon, 24GB RAM, Radeon HD 5870 1GB

I have the exact same problem on a Mac with 10.8.3 and After Effects from the Adobe CS6 MasterCollection (AE 11.0.2.11 (german)): all of a sudden I cannot import any native QuickTime-Movies (ProRes, Animation) or even movies that use e.g. H264 in a QuickTime container. Even projects that worked 2 days ago that contain QuickTime-movies will not open anymore.
This happened 2 days ago without any action from me that I can think of that could have caused this. I did not install any new codecs or plugins, nor was there anything in the apple software update.
What I tried/checked so far (to no avail):
disks are OK,
file permissions are OK,
no Firewall is blocking anything,
deleted AE-prefs,
removed all 3rd-party plugins,
removed all 3rd-party codecs.
Edit: I did some further poking around, and it turns out that after deleting or resetting file permissions of the folder "~/Library/Preferences/Adobe/After Effects" AE will briefly allow you to open an existing project that contains QT-movies. If you then try to import any QT-movie you get the error message -- and after that you cannot open the project again.
This is really bad -- AE is basically unusable right now.
P.S.: The (german) error-message is this: "After Effects Fehler: Die Datei "filname.mov" kann nicht importiert werden: Datei "MooV" ist entweder beschädigt oder wird nicht unterstützt."
Message was edited by: Hanz Franz
Message was edited by: Hanz Franz

After Effects cs6 download error

hello. i have a problem. when i try to download after effects it says to me : Eroor communicating with Adobe.com.(Error 107). Restart Adobe Download Assistant an try to add the product again. I restarted the programm but the error still exists. I reinstalled Adobe Download Assistant but its the shame...Can you help me?

After Effects CS6 requires a 64-bit version of Windows (http://www.adobe.com/products/aftereffects/tech-specs.html)
It won't install on a 32-bit version.

After Effects CS6 opening with a lot of alarms related to effects redundancies with other programs

After intalling Premiere pro CS6 and After effects CS6, I installed add-ons for these programs (newblue, boris, prodad...). When I open After Effects it gives me 38 cases of effects (Detail Enhancer, noise Reducer...) redundant in other programs, telling me to get rid of them.
When I check these effects in my programs, they are mainly .aex files, located in Premiere Pro CS6, Adobe Common Plug-ins, NewBlue Video effects collections 1 to 6. Some of them also exist in avid /pinnacle studio programs (my former video tools I still use to close previous video projects) before concentrating in Adobe CS6 suite. I don't know what to remove in a safe way. Premiere pro CS6 doesn't worry about redundancies ! Only After Effects...

Where, exactly, are the redundant files?
Did you use the installers for these plug-ins or install them manually?

Exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?

exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?
Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

Hi thanks Dave for responding - yes that could work as a 'workaround' - I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
thanks again for your help, if you or anyone has any other solution pls let me know
Best
Alex

After Effects CS6: Cache and Reload Footage Problem

After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears.
To resolve this, I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache
Edit>Preferences>Media & Disk Cache>Clean Database & Cache
From the Project window I've selected all footage and selected Reload
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.
Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else, I'd appreciate some assistance. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB

about Illustrator and Photoshop files in CS6 especially - you should work with Ctrl/Cmd+E (Edit Original).
when in Ae and you want to change a source file, use this command on one of the layers
from the source file you wish to change (doesn't matter if its in the timeline or project window) and
your original software linked to that file will open.
when you work this way you make AE reload that file and any change after that will be seen back in AE immediately.
it is also very convenient way to work because there can be no confusion on which file you are on
if you work with multiple source files for example.
even if you made the change with your Photoshop/Illustrator opened file and got back to Ae
and didn't see any change - press on one of the layers Ctrl/Cmd+E and this will refresh it immediately.
This is the case in CS6.
in CC I have noticed that any change I make is refreshed immediately in Ae as if it rechecks the changes all the time,
and didn't even need to use Ctrl/Cmd+E but it's a good habit all the same.
didn't come across a case where that didn't work for be but
if all fails you could always change the folder location of the file, let Ae lose it, then replace footage of the file,
and thus let Ae re-link it back.

CC Particle World 3D not working properly on After Effects CS6

The CC Particle World's 3D functions doesn't seem to work properly to me.
Videocopilot's Tutorial:
My Project:
The particles aren't 3D on After Effects CS6 to me? :/

I don't follow. The particles were never "true 3D" to begin with - not in Andrews tutorial, not in any version of AE. It's just an illusion and layer stacking order is all that matters. The particles only exist inside their own little 3D universe.
Mylenium

Testing Adobe After Effects cs6

Hey, I've got recently the trial of Adobe After Effects Cs6 and i wanted to know if there's anyway i could copy the same shortcuts i was using in cs5 to place them in cs6 cause there's some minor troubles while i'm working with it.
I've tryed the Shortcut Script Editor found in Adobe but coulnd't get it to work since i din't understand a think.
The biggest problem i have is in here.
Pen Tool (CS6)
<img src="http://img854.imageshack.us/img854/3163/b348e9107e5089d60470690.png" />
Pen Tool (Cs5)
<img src="http://img191.imageshack.us/img191/5480/f4e4f6ef2ad86a65af2738e.png" />
As u can see i cannot cycle anymore through the options to get to the add vertex. i've changed already some shortcuts modifyin the "Adobe After Effects 11.0 Shortcuts" file inside of roaming and it worked fine but i can't find the actual "way" or names.. to make it cycle like in Cs5
IS there any way of doing it, Can i import my old shortcuts? or how do i modify thoese.. And how to make it so when i press "Ctrl" i can move the points like in Cs5..
I find this change in the shortcut the major disavantage in the new AE for me at least..
Thank you,

There was much discussion over how the shortcut for the Pen tool - the G key - should work in CS6. Adobe wanted it to work for switching between the Pen tool and the variable mask feather tool. Knowing that some users might prefer the G key to toggle thru all the Pen tools, they made this a Preference.
Open Preferences > General Preference and toggle OFF the option for "Pen tool shortcut toggles between Pen and Mask Feather tools"
Adobe also fixed a big problem with mask editing. Previously, after you drew a mask with the Pen tool, if you selected a point it deleted it! In CS6, going back to an existing point gives you the Selection tool, so you can move a point easily. So now, you may not need to switch between the other tools just to avoid this problm - you should be able to do everything using just the Pen tool, and use simple shortcuts to switch to other tools. On Mac, when editing a Mask with the Pen tool:
press Command when over a point to get the Delete Vertex tool
press Option when over a point to get the Convert Vertex tool
and just click anywhere along a mask outline to get the Add Vertex tool
By using these shortcuts and using the default Preference (toggle is ON), you can then use G exclusively for switching quickly between the vertex editing and Mask Feather editing.
cheers, Trish

After Effects CS6 - Very slow workflow

Hi everyone, my first writing in adobe forums. I've contacted 3 adobe support agents, but I didn't get much help from them. Recently I switched from PC to Mac Pro, having Adobe Production Premium 5.5 for Windows and now upgraded to Adobe Production Premium 6.
First I tried a trial of After Effects CC and I was surprised how slow it is. Now I'm using AE CS6 full version and it's a bit better, but still pretty dang slow. (The video I made for adobe support explaining the problem is here: http://www.youtube.com/watch?v=-jsZZpH0vYU )
To try to cut long story short. In the video adove, I've created couple of text layers and couple of shape layers. Made them 3D. Added a camera too. When I move the camera, everything is refreshing extremly slow. It's like you're having 100 3D layers and very busy scene,
and actually it's few most simplest 3D layers. The agents from adobe support told me to switch to half rez, or draft mode etc. But the problem is, I do not want to work in half rey, draft mode or something similar, with my configuration it should work pretty normal. Never
had these kind of problems in AE CS5.5. I tried everything, updated the software, updated my Mac OS, disabled global cache, even disabled multiprocessing etc. Btw, rendering is okay.
Is this the way CS6 is made? Is it supposed to be slow? Because, literally I got an answer from the agent that AECS6 is designed like that, in other words, to be slow
I really have no idea anymore how to make this work. I would like to get back to my lovely 5.5, but I only have license for Windows. If you guys could help me, I would really appriciate that.
I use:
* Mac Pro
* 2 x 2,4 GHz 6-Core Intel Xeon
* 64 GB 1333 MHz DDR3
* ATI Radeon HD 5870 1024MB
* 2TB HDD
* 2 x Apple LED Cinema Display 27"
* After Effects CS6 - 11.0.2.11
* Mac OS X 10.8.4
* I haven't had this problems ever before (using ae for quite some time)
* At the moment no 3rd party plugins installed
Thanks!
Mirza

You'll have to get used to creating Ram Previews and using AE's interface in the right way. You should really go through the getting started materials on the home page and take a look at the FAQ. AE is a layer based pixel calculating beast that will do a lot more to a movie at 60 frames per second than Photoshop will do on to a still image. After Effects is essentially Photoshop for movies with a lot more options.
If you want to smoothly drag through the timeline and playback multiple cuts with simple transitions and two or three layers then use Premiere Pro. If you need to use 20 layers and 60 effects to create a stunning composite or motion graphics effect then you're stuck with rendering at just about any price point.

After Effects CS6 error: RAM Preview needs 2 or more frames to playback - any ideas please?

Hi everyone,
I'm running After Effects CS6 (11.0.4.2) on a MacBook Pro 2.8Ghz with 16GB RAM (Mac OS 10.9.4)
As a test, I created a 3 and a half minute Sequence in Adobe Premiere CS6, and then imported this into After Effects CS6, and placed it on the AE timeline.
This footage involves a couple of 1920x1080p footage movies, some psds and a large number of JPGs exported from two videos arranged as a sequence in two layers in Premiere, one on top of the other. So all in all for a Premiere / After Effects file I'd say it's reasonably heavy.
I then did a RAM Preview with Multiprocessing switched off - the 3 and a half minute sequence loaded into RAM, taking about 1min 30seconds, and played back in realtime at 25fps. This worked fine with 3,4,5 and 6 GB RAM available to other applications in the Memory Preferences. All things considered I think this is quite good. I can make changes, reclick the RAM Preview icon and my changes load into RAM and it previews ok.
My only 'complaint' is how long the RAM Preview takes to load up the whole thing.
I've been reading up on Multiprocessing and decided to try this to see if I can speed up the time it takes my RAM Preview to load up.
So I looked at some recommendations from Adobe and read information on various forums including this one.
My settings in the Memory Preferences are currently
• 6GB reserved for other applications
• Reduce cache size when system is low on memory - unticked
• After Effects Multiprocessing - ticked
• Installed CPUs (processor cores) - 8
• CPUs reserved for other applications - 6
• RAM allocation per background CPU - 3GB
• Actual CPUs that will be used - 2
This combination takes about 25 seconds to load up my 3 and a half minute sequence which I thought was pretty amazing.
I then pressed the stop button and then the play button - so now just playing the sequence briefly.
And also added a new layer - into the timeline - just a simple shape.
Then I tried a RAM Preview again.
I found I could load up part of the sequence but not load the whole thing into RAM.
I kept trying to get a RAM Preview and got this message
"After Effects error: RAM Preview needs 2 or more frames to playback" which seems to prevent RAM Preview from working.
Eventually I quit and restarted After Effects and the problem went away temporarily and then came back when I tried again.
I tried various changes to the Memory Preferences - trying 3GB available for other applications. This gave 13GB of my 16GB RAM to After Effects.
This made it take slightly longer for the After Effects error to appear but it still appeared.
I tried ticking Reduce Cache size in the Memory Prefs - the After Effects error still appeared, so having read this is supposed to make the issue better I now leave it untucked, but as far as I can see ticked or untucked, it makes no difference, the problem remains.
I've since tried -
Making 2,3,4,5 and 6 CPUs available for other applications.
Changing the Background RAM allocation per background CPU to 0.75GB, 1GB, 1.5GB, 2GB and 3GB
Lots of combinations.
But in the end, I always get the "After Effects error: RAM Preview needs 2 or more frames to playback" error.
It might take less or more time for the message to show up, depending on the combination of settings, but in the end I always got the same message appearing.
And I notice that I can RAM Preview less and less of the timeline. i.e. it becomes more blue than it does green and will load in only a small section of the timeline as opposed to the whole thing.
Reading further, I tried Edit > Purge > Image Cache and Edit > Purge > All Memory but still get the error message.
I also tried ensuring there were no other applications running e.g. Safari or Chrome or Firefox. And certainly not Photoshop or Premiere etc.
Reading even further, I tried two Memory management applications - 'Memory Clean' and 'Purge.'
Neither has had any effect - the After Effects error still appears.
Then I went back into the Memory and Multiprocessing Preferences.
I unticked Render Multiple Frames Simultaneously. And now the RAM Preview loads the whole 3 and half minute sequence in entirety, taking about 1 and half minutes to do so. It's working as perfectly as if I'd just quit and re-opened the application.
Then I went back into the Memory and Multiprocessing Preferences.
I reticked Render Multiple Frames Simultaneously.
The chose Edit > Purge > All
And tried a RAM Preview again. It loaded up in 25 seconds, but then, as previously, the error message came.
I tried Edit > Purge All - no effect.
And I tried going into the Media and Disk Cache Preferences and clicked Empty Disk Cache - still the problem remains.
I understand from my reading that After Effects CS6 11.0.2 was intended to fix this issue but I'm on 11.0.4 and as far as I can tell, I still have it - assuming it's the same thing.
As far as I can see, not using Multiprocessing allows me to work without these errors but take a bit longer to load the RAM Preview.
However I'd like to be able to use Multiprocessing as it seems it can potentially speeds things up quite a lot. I realise I could just not use it and AE would work, but I'd rather be able to make use of a feature of the software if possible, especially if it will speed things up and make optimum use of the my computer's hardware.
I've downloaded a trial copy of After Effects CC 2014. I'm still testing it but as far as I can see the RAM Preview error appears in this version of AE as well, but can take bit longer to show up in my experience.
Thanks everyone - if anyone has any thoughts or advice I'd appreciate hearing your opinions.
Kind regards,
John

You need to have much more RAM reserved for other applications and more CPUs reserved for other applications. Your current settings are crippling your performance.
Read these:
https://blogs.adobe.com/aftereffects/2009/12/performance-tip-dont-starve-yo.html
http://blogs.adobe.com/aftereffects/2010/03/performance-tip-dont-oversched.html
After you have adjusted your settings according to the recommendations on those pages, restart your computer and try again.

After Effects CS6 Crashes Upon Opening

Here is the problem:
I have After Effects CS6, and it and other creative suite programs have been working just fine, until recently. This just started a few days ago after every time I open After Effects to start a project it immediately closes and I receive this screen. I don't even make it to a project panel.
under the view problem details it reads:
Problem signature:
Problem Event Name: APPCRASH
Application Name: AfterFX.exe
Application Version: 11.0.0.378
Application Timestamp: 4f6d63ab
Fault Module Name: ole32.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7c92c
Exception Code: c0000005
Exception Offset: 000000000001022a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: ea97
Additional Information 2: ea97fd9fc4586d82a9317d4715f3d725
Additional Information 3: dd88
Additional Information 4: dd88d2dea5f801ce78614a15e5184439
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I have tried to "check online for a solution and close the program" but not results come of it.
Potential source of problem : I was uploading a Camera Raw sequence into AE when it decided to stop responding. Upon trying everything to revive the program I had to force quit. Since then the program has been acting funky on me.I was able to open AE successfully twice by right clicking the AE icon in my bar then selecting a specific project from the pop up menu.
But since then, this quick fix no longer works I have uninstalled the program once, then re-installed the program, upon which it worked for 2 days, then stopped working and here I am. My exact steps when trying to open the program are 1. turn the computer on 2. click on the AE icon in my taskbar 3.Error screen
Here are my system specs:
I have done all of the recent updates available
If there is anymore information I need to provide please let me know. There is no other third-party hardware or related items on this computer.
thanks in advance

So I updated After Effects, It all seemed to be working just fine. And then a day ago it started doing the same thing. I have updated everything for the computer and on AE. Any idea how to fix it? If it is the caches, trash, etc.. how do I deal with this problem?
New problem signature reads as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: AfterFX.exe
Application Version: 11.0.4.2
Application Timestamp: 52886341
Fault Module Name: ole32.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7c92c
Exception Code: c0000005
Exception Offset: 000000000001022a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: ea97
Additional Information 2: ea97fd9fc4586d82a9317d4715f3d725
Additional Information 3: dd88
Additional Information 4: dd88d2dea5f801ce78614a15e5184439

HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.

Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Adobe After Effects CS6 on PC when starting says...

Adobe After Effects CS6 on PC when starting says "After Effects warning: An unknown Adobe Player Engine error has occurred. Scripting will be disabled." *hits okay* "After Effects error: Crash in progress. Last logged message was: <196> <DynamicLink> <5> G:Adobe After Effects Cs6\Support Files\32\dynamiclinkmanager.exe" After this it doesn't work. PLEASE HELP!

WIthout proper system information and other details nobody can tell you anything. The unusual install location alone could be problematic...
Mylenium

El proyecto no existe - After Effects CS6

Similar Messages

Maybe you are looking for