Elan touch won't stay disabled....

My work around for the crazy touchpad has been to disable it. Had tried to change the sensitivity settings with no luck.
Now the device starts back on its own. I have to go back in to mouse settings; it will show disabled, but i check and re-check the disable box and apply and it will disable it again.
Any suggestions to this or a fix for the touchpad yet???
G580 20150

I have a Lenovo G500 laptop. It came with Elan 'Smartpad' touchpad driver. The driver propertiesdialog box includes a checkbox that says "Disable when external USB pointing device plug in". I want my touchpad to AUTOMATICALLY disable itself IF it detects that a USB mouse is plugged in. When I checked the "Disable when external USB pointing device plug in" and the touchpad does disable itself .... but whenever I disconnect the USB mouse the touchpad does not turn itself back on. This includes when I boot the system without a mouse .... the touchpad remains disabled even though there is no mouse. I have tried updated drivers from Elan and Lenovo but the problem persists. I expected the touchpad to toggle itself on or off depending on whether a USB mouse is plugged in. Anyone else have this problem ? Any ideas to solve it other than manually enabling / disabling the touchpad ? Thx -
Moderator Note; subject edited; post merged in. Was; Elan touchpad driver does not automatically detect USB mouse

Similar Messages

Re: Touchpad tapping won't stay disabled

It's Sept 2009 and I don't see a solution to this yet. I just got a new T400 and the double tapping is driving me nuts too and won't stay disabled. My "old" T40 was fine - I disabled it and it never came back on again.
Who is running this forum? Are there any lenovo people here to answer these questions? I would very much like to disable this "feature". I've tried in control panel/mouse. I looked at the bios and disabling the entire ultranav was the only option there and I don't want to do that.

bethw wrote:
Who is running this forum? Are there any lenovo people here to answer these questions?
While there are a few Lenovo employees roaming around in here helping out on a volunteer basis, this is not an official support channel with dedicated Lenovo support personnel assigned to it. Instead, this is designed to be a user-to-user support and discussion forum. You may or may not get an answer directly from one of the Lenovo employees as there are way more of us than them and all of them, even Mark, have full-time jobs doing other things.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

My ipod touch won't stay on

My ipod touch won't stay on for more then half a second. I have to repeatedly push the sleep or home button for it to even go on for that half second. Its only been doing this for a few days. I really need some help I've already tryed to restart it but it does the same thing. Help!!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Brand new iPod touch won't stay connected to Wifi

I got a brand new white iPod touch for Christmas, and I can get it to connect to the internet and I can use the internet, but then after a few minutes it drops off the connection and I have to go back in and reconnect it. I know there isn't anything wrong with the wifi connection at my house because I have an older iPod touch (3rd generation) and it has always connected and stayed connected without a problem. My mom and brother also got the same iPod touches for Christmas, and theirs do the same exact thing.

Change the router SSID (network name) and password to something shorter than the defaults. If you dig into the router configuration web page you will find a short SSID. My SSID is 5 characters long, and the password I use is 10 charcters long.

IPod touch won't stay connected

I just recieved my uncle's old iPod touch wich is in perfectly good condition. I try to sync it to my computer but it only stays connected for about a second. I tried resetting the whole system, but it did not help at all. I hear the little noist and the battery shows the lightning bolt but only for about a half second. It is not even enough for the computer to recognize it. I have tried two different USB cables and my olf iPod nano worked just fine. Any suggestions? Please help. Thanks a ton!

You do have iTunes installed on your computer, correct?
If you do and are having this problem, see this article for help: http://support.apple.com/kb/TS1567

2G iPod Touch won't stay connected to Jaybird Freedom headphones.

I've successfully paired the 2G touch with my new JF3 headphones. I get the confirmation, and see the updated Bluetooth icon on the screen.
When I go to music playback, the connection is almost immediately dropped.
I've gone through all of the steps, ad nauseum, and even have had the iPod "forget this device", so I can start over.
There has to be a setting or a connectivity conflict that I don't understand.
I've tried multiple iterations of the pairing sequence. The longest successful pairing I've had lasted roughly 30 seconds...and this was all done inside, not outdoors, and the devices were always well within the stated range.
I'm too the point where I'm wondering if I should just give up messing around with it, and purchase the iSport adapter, shut off my bluetooth and move on.
Hoping there is someone more clever than I am out there looking to help.

Change the router SSID (network name) and password to something shorter than the defaults. If you dig into the router configuration web page you will find a short SSID. My SSID is 5 characters long, and the password I use is 10 charcters long.

"Wake for Network Access" Won't Stay DISabled

I'm trying to prevent my iMac from needlessly waking. When I uncheck "Wake for Network Access" in Energy Saver, after I've restarted the computer the setting does not stick. I've tried deleting the energysaver preferences file in /Library/Preferences/Systemconfiguration, as well as repairing disk permissions. The checkbox keeps rechecking itself after logout/restart. Any ideas?

Check the Log Me in Client, it has an option for Wake for Network access - which enforces the option.
I had the same issue and wanted to kill someone

First generation ipod touch says ipod is disabled and won't unlock or allow me to unlock. what should i do?

first generation ipod touch says ipod is disabled and won't unlock or allow me to attempt to unlock. how do i fix it?

Try this.
http://support.apple.com/kb/HT1808
Apple tip page for putting iPod in recovery mode.
Worked on mine for the same problem.

My ipod touch screen displays "ipod disabled" "connect to itunes". It won't let me connect to itunes or sign in

My ipod touch screen displays "ipod disabled" "connect to itunes". It won't let me connect to itunes or sign in

Hey there Rghanam01,
I see that you have an iPod that has been put into recovery mode and will need to be restored. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Note that if you don’t see your device in iTunes, you will want to use the instructions under the “Get more help” section of the article:
Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My ipod touch says it is disabled and to connect to itunes, but it won't let me. It is froze....what can I do?

My ipod touch says it is disabled and to connect to itunes, but it won't let me. It is froze....what can I do?

Connect in recovery mode to restore, explained in this article: iOS: Unable to update or restore
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen

New iPod Touch Wifi won't stay connected?

Just bought new 16 GB iPod Touch, and it won't stay connected to my home WiFi. Even after a reset of network connection, re-enter WiFi info and Touch connects for a few minutes and then loses connectivity even tho WiFi bars still show. Turning WiFi off and on does not fix problem. Turning iPod off and back on will allow Touch to reconnect, but again only for a few minutes at best.

Does the iPod work OK with other networks?
Do other devices work OK?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My Ipod touch screen won't stay on. Right after turning the Ipod on it goes fuzzy even after a full charge. Is this due to battery problems?

My Ipod touch screen won't stay on. Right after turning the ipod on, the screen goes fuzzy.
Is this is sign the battery is a problem? Clicking sounds are also not working despite being tunred on, as well as the speaker.
L

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

MBP display won't stay off, wakes from sleep

I have a newish 15" MBP, 1680 display, hooked up to a Dell external monitor when it's at home. When I go to bed I cut power to the display via control-shift-eject, but generally don't put the computer to sleep overnight.
With this new machine, after it's been running for a while (as little as a day, or as long as a couple weeks), the displays will come on again in the night. Once this happens, the displays won't stay off for longer than about five seconds. If I then put the machine to sleep, it'll wake itself up minutes or hours later (generally not long enough to miss a Time Machine interval). The only cure is rebooting.
I tried an SMC reset, but that fix only lasted about as long as any other reboot.
I've since tried systematically removing every peripheral (a USB hub, the external display, any directly-connected iOS devices) and testing display-off after each; no change. I've turned off my Bluetooth keyboard and mouse, then disabled Bluetooth on the computer, turned off wifi, quit every menu extra (jitouch, Viscosity, Dropbox, Pastebot, Fastscripts, Transmit, Teleport), and quit every running application. The problem remains repeatable after every step.
It's repeatable at the moment — any suggestions for other things to try, preferably short of the reboot which temporarily masks the problem? I'm a little concerned that it's going to manifest at some point while I have the laptop sitting in a bag, which will then cook itself.
I'm on 10.6.4 now, the problem started on 10.6.3.
Thanks.

Try checking the system logs in Applications/Utilities/Console.app for clues. The entries carry time stamps. Usually a wake event will leave some trace. By matching time stamps to the time of occurrence you may find the culprit.

IPod Touch can't stay connected to iTunes

I just bought an iPod touch but when I try to connect it to my WinXP laptop, it won't stay connected for more than a few seconds. I hear the iPod make a sound when it sees that it is connected to my laptop and it appears in the iTunes list for 10-30 seconds before disconnecting. After several tries to stay connected, sometimes iTunes claims that it can't connect to the "iPhone" and gives me an error 0xE8000001.
I tried uninstalling and reinstalling itunes. No success.
I tried different USB ports. No success.
It seemed to work fine for the first few days after purchase but now this problem has come up

Hi, DJSchmike.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with iTunes disconnecting your older iPod nanos automatically. This can be difficult to troubleshoot and you have already processed some great steps with no resolution. The next step would be troubleshooting USB connections and security software conflicts. Here are some troubleshooting guides that I would recommend going through.
iTunes: Resolve USB-related alerts
Resolve issues between iTunes and security software
Cheers,
Jason H.

Elan touch won't stay disabled....

Similar Messages

Maybe you are looking for