Elantech Touchpad Detected As PS/2 Elantech Mouse (Dell Vostro 3560)

Dear community,
I am facing troubles with my Dell Vostro 3560's Elantech Touchpad. It gets detected as PS/2 Elantech mouse.
[acs@einherij ~]$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PS/2 Elantech Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Laptop_Integrated_Webcam_E4HD id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
Testwise. I installed from AUR the "psmouse-elantech" package (as mentioned in the Touchpad Synaptics article). After reboot, no effect at all, xinput gives the same output.
Can somebody point me in the correct direction please?
--- snip /var/log/Xorg.0.log ---
[ 11.978] (II) config/udev: Adding input device PS/2 Elantech Mouse (/dev/input/event11)
[ 11.978] (**) PS/2 Elantech Mouse: Applying InputClass "evdev pointer catchall"
[ 11.978] (II) Using input driver 'evdev' for 'PS/2 Elantech Mouse'
[ 11.978] (**) PS/2 Elantech Mouse: always reports core events
[ 11.978] (**) evdev: PS/2 Elantech Mouse: Device: "/dev/input/event11"
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Vendor 0x2 Product 0x1
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found 3 mouse buttons
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found relative axes
[ 11.978] (--) evdev: PS/2 Elantech Mouse: Found x and y relative axes
[ 11.978] (II) evdev: PS/2 Elantech Mouse: Configuring as mouse
[ 11.978] (**) evdev: PS/2 Elantech Mouse: YAxisMapping: buttons 4 and 5
[ 11.978] (**) evdev: PS/2 Elantech Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 11.978] (II) XINPUT: Adding extended input device "PS/2 Elantech Mouse" (type: MOUSE, id 12)
[ 11.978] (II) evdev: PS/2 Elantech Mouse: initialized for relative axes.
--- snap ---
Last edited by sonnyka (2012-08-07 16:58:44)

also see: https://bbs.archlinux.org/viewtopic.php?id=117109

Similar Messages

  • Touchpad detected as PS/2 Logitech Wheel Mouse

    Hi,
    The touchpad on my Asus U46SV laptop is being detected as a PS/2 Logitech Wheel Mouse. Therefore no touchpad driver is loaded and all fancy features (two-finger scrolling, disable while typing, etc) are unavailable. How can I fix this?
    $ xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Logitech Wheel Mouse id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ ASUS USB2.0 WebCam id=10 [slave keyboard (3)]
    ↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
    [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040200000 - 00000000aabcc000 (usable)
    [ 0.000000] BIOS-e820: 00000000aabcc000 - 00000000aacdf000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aacdf000 - 00000000aace1000 (usable)
    [ 0.000000] BIOS-e820: 00000000aace1000 - 00000000aacf4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aacf4000 - 00000000aacf5000 (usable)
    [ 0.000000] BIOS-e820: 00000000aacf5000 - 00000000aade8000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aade8000 - 00000000aaf19000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaf19000 - 00000000aafe8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. U46SV/U46SV, BIOS U46SV.203 06/09/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0A8000000 mask FFC000000 write-back
    [ 0.000000] 4 base 0AB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 140000000 mask FF0000000 write-back
    [ 0.000000] 7 base 14FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fcc70] fcc70
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
    [ 0.000000] 0000000000 - 00aae00000 page 2M
    [ 0.000000] 00aae00000 - 00aaffd000 page 4k
    [ 0.000000] kernel direct mapping tables up to aaffd000 @ aaff8000-aaffd000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000014fe00000
    [ 0.000000] 0100000000 - 014fe00000 page 2M
    [ 0.000000] kernel direct mapping tables up to 14fe00000 @ 14fdf9000-14fe00000
    [ 0.000000] RAMDISK: 1fda0000 - 1fff0000
    [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000aaf9bd98 000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000aaf7c018 0DC69 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000aafe5e40 00040
    [ 0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
    [ 0.000000] ACPI: HPET 00000000aafe6d18 00038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
    [ 0.000000] ACPI: ECDT 00000000aafe5b18 000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
    [ 0.000000] ACPI: MCFG 00000000aafe6c98 0003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000aaf7b818 00799 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000aaf7a018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000aaf9cc18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
    [ 0.000000] ACPI: SSDT 00000000aaf5ea98 002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: ASF! 00000000aafe5a18 000A0 (v32 INTEL HCG568D 00000001 MSFT 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000014fe00000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000014fe00000
    [ 0.000000] NODE_DATA [000000014fdfb000 - 000000014fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0014fe00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[9] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040000
    [ 0.000000] 0: 0x00040200 -> 0x000aabcc
    [ 0.000000] 0: 0x000aacdf -> 0x000aace1
    [ 0.000000] 0: 0x000aacf4 -> 0x000aacf5
    [ 0.000000] 0: 0x000aade8 -> 0x000aaf19
    [ 0.000000] 0: 0x000aafe8 -> 0x000aaffd
    [ 0.000000] 0: 0x00100000 -> 0x0014fe00
    [ 0.000000] On node 0 totalpages: 1025699
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 680269 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4473 pages used for memmap
    [ 0.000000] Normal zone: 322695 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000aabcc000 - 00000000aacdf000
    [ 0.000000] PM: Registered nosave memory: 00000000aace1000 - 00000000aacf4000
    [ 0.000000] PM: Registered nosave memory: 00000000aacf5000 - 00000000aade8000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf19000 - 00000000aafe8000
    [ 0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
    [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
    [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
    [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
    [ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fa00000 s78464 r8192 d23936 u131072
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006885
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3963540k/5502976k available (4064k kernel code, 1400180k absent, 139256k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2294.473 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.15 BogoMIPS (lpj=7648243)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000118] Security Framework initialized
    [ 0.000122] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000492] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001691] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002141] Mount-cache hash table entries: 256
    [ 0.002461] Initializing cgroup subsys cpuacct
    [ 0.002487] Initializing cgroup subsys memory
    [ 0.002502] Initializing cgroup subsys devices
    [ 0.002504] Initializing cgroup subsys freezer
    [ 0.002505] Initializing cgroup subsys net_cls
    [ 0.002507] Initializing cgroup subsys blkio
    [ 0.002553] CPU: Physical Processor ID: 0
    [ 0.002555] CPU: Processor Core ID: 0
    [ 0.002560] mce: CPU supports 7 MCE banks
    [ 0.002572] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002578] using mwait in idle threads.
    [ 0.003714] ACPI: Core revision 20110413
    [ 0.160380] ftrace: allocating 16144 entries in 64 pages
    [ 0.167075] Switched APIC routing to physical flat.
    [ 0.167426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.200410] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
    [ 0.304675] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
    [ 0.304681] ... version: 3
    [ 0.304682] ... bit width: 48
    [ 0.304683] ... generic registers: 4
    [ 0.304685] ... value mask: 0000ffffffffffff
    [ 0.304686] ... max period: 000000007fffffff
    [ 0.304687] ... fixed-purpose events: 3
    [ 0.304688] ... event mask: 000000070000000f
    [ 0.324897] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.351341] Booting Node 0, Processors #1
    [ 0.351348] smpboot cpu 1: start_ip = 99000
    [ 0.464652] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.484623] #2
    [ 0.484627] smpboot cpu 2: start_ip = 99000
    [ 0.597913] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.617876] #3
    [ 0.617880] smpboot cpu 3: start_ip = 99000
    [ 0.741252] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.747769] Brought up 4 CPUs
    [ 0.747775] Total of 4 processors activated (18364.91 BogoMIPS).
    [ 0.750911] devtmpfs: initialized
    [ 0.751676] PM: Registering ACPI NVS region at aaf19000 (847872 bytes)
    [ 0.752391] print_constraints: dummy:
    [ 0.752459] NET: Registered protocol family 16
    [ 0.752545] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.752547] ACPI: bus type pci registered
    [ 0.752684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.752687] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.768153] PCI: Using configuration type 1 for base access
    [ 0.768569] bio: create slab <bio-0> at 0
    [ 0.770460] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.770465] ACPI: EC: Look up EC in DSDT
    [ 0.772328] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.784480] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.854764] ACPI: SSDT 00000000aadbc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.855208] ACPI: Dynamic OEM Table Load:
    [ 0.855210] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.864674] ACPI: SSDT 00000000aadbda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.865144] ACPI: Dynamic OEM Table Load:
    [ 0.865146] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.874544] ACPI: SSDT 00000000aadbbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.874985] ACPI: Dynamic OEM Table Load:
    [ 0.874987] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.894586] ACPI: Interpreter enabled
    [ 0.894589] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.894611] ACPI: Using IOAPIC for interrupt routing
    [ 0.999159] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.999351] ACPI: No dock devices found.
    [ 0.999352] HEST: Table not found.
    [ 0.999355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.999558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.999930] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.999932] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.999934] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.999936] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.999938] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.999940] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.999942] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.999944] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 0.999946] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 0.999948] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
    [ 0.999950] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.999961] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 0.999994] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
    [ 1.000018] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.000021] pci 0000:00:01.0: PME# disabled
    [ 1.000038] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
    [ 1.000048] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
    [ 1.000055] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.000059] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
    [ 1.000109] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 1.000132] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
    [ 1.000195] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.000200] pci 0000:00:16.0: PME# disabled
    [ 1.000231] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 1.000253] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
    [ 1.000326] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.000331] pci 0000:00:1a.0: PME# disabled
    [ 1.000355] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 1.000371] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
    [ 1.000426] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.000430] pci 0000:00:1b.0: PME# disabled
    [ 1.000450] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 1.000513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.000517] pci 0000:00:1c.0: PME# disabled
    [ 1.000540] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
    [ 1.000603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.000607] pci 0000:00:1c.1: PME# disabled
    [ 1.000632] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 1.000695] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.000699] pci 0000:00:1c.3: PME# disabled
    [ 1.000723] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
    [ 1.000785] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.000789] pci 0000:00:1c.5: PME# disabled
    [ 1.000819] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 1.000841] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
    [ 1.000914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.000919] pci 0000:00:1d.0: PME# disabled
    [ 1.000944] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
    [ 1.001066] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
    [ 1.001085] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
    [ 1.001094] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
    [ 1.001102] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
    [ 1.001111] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
    [ 1.001119] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
    [ 1.001128] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
    [ 1.001161] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.001165] pci 0000:00:1f.2: PME# disabled
    [ 1.001183] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 1.001199] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
    [ 1.001220] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
    [ 1.001276] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
    [ 1.001284] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
    [ 1.001292] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.001301] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 1.001308] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    [ 1.001314] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
    [ 1.001346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.001348] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.001351] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
    [ 1.001354] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.001399] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.001403] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.001407] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
    [ 1.001414] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.001480] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
    [ 1.001508] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
    [ 1.001612] pci 0000:03:00.0: supports D1
    [ 1.001614] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.001619] pci 0000:03:00.0: PME# disabled
    [ 1.001657] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.001662] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.001666] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
    [ 1.001672] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.001743] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
    [ 1.001766] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
    [ 1.001908] pci 0000:04:00.0: PME# supported from D0 D3hot
    [ 1.001914] pci 0000:04:00.0: PME# disabled
    [ 1.001944] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.001948] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
    [ 1.001952] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
    [ 1.001959] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.002025] pci 0000:05:00.0: [1969:1083] type 0 class 0x000200
    [ 1.002053] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
    [ 1.002068] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f]
    [ 1.002166] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.002171] pci 0000:05:00.0: PME# disabled
    [ 1.002210] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.002214] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.002219] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
    [ 1.002225] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.002249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.002373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.002402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.002435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.002467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.002510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
    [ 1.002545] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.002548] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.002549] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.700980] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.701022] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
    [ 1.701063] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.701104] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.701146] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.701186] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.701226] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 1.701264] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
    [ 1.701338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.701345] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.701347] vgaarb: loaded
    [ 1.701348] vgaarb: bridge control possible 0000:01:00.0
    [ 1.701349] vgaarb: bridge control possible 0000:00:02.0
    [ 1.701410] PCI: Using ACPI for IRQ routing
    [ 1.702943] PCI: pci_cache_line_size set to 64 bytes
    [ 1.703021] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.703024] reserve RAM buffer: 00000000aabcc000 - 00000000abffffff
    [ 1.703027] reserve RAM buffer: 00000000aace1000 - 00000000abffffff
    [ 1.703029] reserve RAM buffer: 00000000aacf5000 - 00000000abffffff
    [ 1.703031] reserve RAM buffer: 00000000aaf19000 - 00000000abffffff
    [ 1.703033] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff
    [ 1.703035] reserve RAM buffer: 000000014fe00000 - 000000014fffffff
    [ 1.703130] NetLabel: Initializing
    [ 1.703131] NetLabel: domain hash size = 128
    [ 1.703132] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.703144] NetLabel: unlabeled traffic allowed by default
    [ 1.703158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.703163] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.705180] Switching to clocksource hpet
    [ 1.707228] Switched to NOHz mode on CPU #0
    [ 1.707282] Switched to NOHz mode on CPU #1
    [ 1.707289] Switched to NOHz mode on CPU #2
    [ 1.707371] Switched to NOHz mode on CPU #3
    [ 1.709995] pnp: PnP ACPI init
    [ 1.710009] ACPI: bus type pnp registered
    [ 1.710231] pnp 00:00: [bus 00-3e]
    [ 1.710233] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.710235] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.710236] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.710238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.710240] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.710242] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.710243] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.710245] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.710247] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.710248] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.710250] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.710252] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.710253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.710255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.710257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.710258] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.710260] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.710262] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
    [ 1.710264] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 1.710335] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.710347] pnp 00:01: [io 0x0000-0x001f]
    [ 1.710349] pnp 00:01: [io 0x0081-0x0091]
    [ 1.710350] pnp 00:01: [io 0x0093-0x009f]
    [ 1.710351] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.710353] pnp 00:01: [dma 4]
    [ 1.710371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.710378] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.710395] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.710466] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.710484] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.710493] pnp 00:04: [io 0x00f0]
    [ 1.710501] pnp 00:04: [irq 13]
    [ 1.710519] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.710528] pnp 00:05: [io 0x002e-0x002f]
    [ 1.710530] pnp 00:05: [io 0x004e-0x004f]
    [ 1.710531] pnp 00:05: [io 0x0061]
    [ 1.710533] pnp 00:05: [io 0x0063]
    [ 1.710534] pnp 00:05: [io 0x0065]
    [ 1.710535] pnp 00:05: [io 0x0067]
    [ 1.710536] pnp 00:05: [io 0x0070]
    [ 1.710538] pnp 00:05: [io 0x0080]
    [ 1.710539] pnp 00:05: [io 0x0092]
    [ 1.710542] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.710544] pnp 00:05: [io 0x0680-0x069f]
    [ 1.710545] pnp 00:05: [io 0x1000-0x100f]
    [ 1.710546] pnp 00:05: [io 0xffff]
    [ 1.710548] pnp 00:05: [io 0xffff]
    [ 1.710549] pnp 00:05: [io 0x0400-0x0453]
    [ 1.710550] pnp 00:05: [io 0x0458-0x047f]
    [ 1.710552] pnp 00:05: [io 0x0500-0x057f]
    [ 1.710553] pnp 00:05: [io 0x164e-0x164f]
    [ 1.710595] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.710598] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 1.710600] system 00:05: [io 0xffff] has been reserved
    [ 1.710601] system 00:05: [io 0xffff] has been reserved
    [ 1.710603] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.710605] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.710607] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.710609] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.710612] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.710619] pnp 00:06: [io 0x0070-0x0077]
    [ 1.710624] pnp 00:06: [irq 8]
    [ 1.710642] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.710658] pnp 00:07: [io 0x0454-0x0457]
    [ 1.710686] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.710689] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.710714] pnp 00:08: [io 0x0060]
    [ 1.710716] pnp 00:08: [io 0x0064]
    [ 1.710721] pnp 00:08: [irq 1]
    [ 1.710741] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.710775] pnp 00:09: [irq 12]
    [ 1.710798] pnp 00:09: Plug and Play ACPI device, IDs ETD0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.758811] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 1.758813] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 1.758814] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 1.758816] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 1.758817] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
    [ 1.758819] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 1.758820] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 1.758822] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 1.758824] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 1.758825] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 1.758827] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
    [ 1.758884] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.758887] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 1.758889] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.758891] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.758893] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
    [ 1.758895] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.758897] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.758900] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.758902] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.758904] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.758906] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
    [ 1.758909] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.758934] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
    [ 1.758981] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
    [ 1.758984] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.759078] pnp 00:0c: [mem 0x20000000-0x201fffff]
    [ 1.759080] pnp 00:0c: [mem 0x40000000-0x401fffff]
    [ 1.759131] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.759133] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
    [ 1.759136] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.759147] pnp: PnP ACPI: found 13 devices
    [ 1.759148] ACPI: ACPI bus type pnp unregistered
    [ 1.764848] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.764884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.764886] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.764889] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
    [ 1.764892] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.764896] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.764899] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.764905] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
    [ 1.764909] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.764916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.764919] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.764925] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
    [ 1.764929] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.764936] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.764939] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
    [ 1.764944] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
    [ 1.764949] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.764956] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.764959] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.764964] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
    [ 1.764969] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.764983] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.764986] pci 0000:00:01.0: setting latency timer to 64
    [ 1.764993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.764997] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.765005] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.765010] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.765018] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.765022] pci 0000:00:1c.3: setting latency timer to 64
    [ 1.765028] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.765033] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.765037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.765039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.765041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.765042] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.765044] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.765046] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.765048] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.765050] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.765051] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.765053] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
    [ 1.765055] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 1.765057] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.765059] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
    [ 1.765061] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.765063] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.765064] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
    [ 1.765066] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.765068] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.765070] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
    [ 1.765072] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.765074] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.765076] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
    [ 1.765078] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.765080] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.765081] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
    [ 1.765083] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.765138] NET: Registered protocol family 2
    [ 1.765319] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.766220] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.767965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.768183] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.768185] TCP reno registered
    [ 1.768194] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.768216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.768449] NET: Registered protocol family 1
    [ 1.768464] pci 0000:00:02.0: Boot video device
    [ 2.015314] PCI: CLS 64 bytes, default 64
    [ 2.015352] Unpacking initramfs...
    [ 2.047361] Freeing initrd memory: 2368k freed
    [ 2.047653] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.047657] Placing 64MB software IO TLB between ffff8800a6bcc000 - ffff8800aabcc000
    [ 2.047658] software IO TLB at phys 0xa6bcc000 - 0xaabcc000
    [ 2.048060] audit: initializing netlink socket (disabled)
    [ 2.048068] type=2000 audit(1313603670.739:1): initialized
    [ 2.054235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.067195] VFS: Disk quotas dquot_6.5.2
    [ 2.067311] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.067454] msgmni has been set to 7745
    [ 2.067640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 2.067672] io scheduler noop registered
    [ 2.067674] io scheduler deadline registered
    [ 2.067711] io scheduler cfq registered (default)
    [ 2.067791] pcieport 0000:00:01.0: setting latency timer to 64
    [ 2.067814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.068084] intel_idle: MWAIT substates: 0x21120
    [ 2.068086] intel_idle: v0.4 model 0x2A
    [ 2.068087] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.068117] ERST: Table is not found!
    [ 2.068163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.268759] Linux agpgart interface v0.103
    [ 2.268839] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 2.270529] i8042: Detected active multiplexing controller, rev 1.1
    [ 2.271297] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.271322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 2.271339] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 2.271357] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 2.271374] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 2.271436] mousedev: PS/2 mouse device common for all mice
    [ 2.271488] rtc_cmos 00:06: RTC can wake from S4
    [ 2.271585] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 2.271612] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 2.271729] cpuidle: using governor ladder
    [ 2.271883] cpuidle: using governor menu
    [ 2.272040] TCP cubic registered
    [ 2.272042] NET: Registered protocol family 17
    [ 2.272048] Registering the dns_resolver key type
    [ 2.272116] PM: Hibernation image not present or could not be loaded.
    [ 2.272120] registered taskstats version 1
    [ 2.278319] rtc_cmos 00:06: setting system clock to 2011-08-17 17:54:31 UTC (1313603671)
    [ 2.278398] Initializing network drop monitor service
    [ 2.279674] Freeing unused kernel memory: 712k freed
    [ 2.279759] Write protecting the kernel read-only data: 6144k
    [ 2.279988] Freeing unused kernel memory: 12k freed
    [ 2.282266] Freeing unused kernel memory: 776k freed
    [ 2.291723] udevd[55]: starting version 173
    [ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.339771] usbcore: registered new interface driver usbfs
    [ 2.339795] usbcore: registered new interface driver hub
    [ 2.341676] usbcore: registered new device driver usb
    [ 2.342076] SCSI subsystem initialized
    [ 2.346410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.346435] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.346439] libata version 3.00 loaded.
    [ 2.346468] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2.346474] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 2.346533] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.346567] ehci_hcd 0000:00:1a.0: debug port 2
    [ 2.350464] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.350482] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
    [ 2.361641] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.361880] hub 1-0:1.0: USB hub found
    [ 2.361885] hub 1-0:1.0: 2 ports detected
    [ 2.361969] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 2.362000] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2.362005] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 2.362014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.362042] ehci_hcd 0000:00:1d.0: debug port 2
    [ 2.363294] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 2.363343] xhci_hcd 0000:04:00.0: setting latency timer to 64
    [ 2.363348] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 2.363358] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
    [ 2.365933] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.365956] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
    [ 2.378294] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.378444] hub 2-0:1.0: USB hub found
    [ 2.378448] hub 2-0:1.0: 2 ports detected
    [ 2.378553] ahci 0000:00:1f.2: version 3.0
    [ 2.378566] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2.378706] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.378982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 2.378987] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 2.378993] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.385587] scsi0 : ahci
    [ 2.385700] scsi1 : ahci
    [ 2.385786] scsi2 : ahci
    [ 2.385871] scsi3 : ahci
    [ 2.385959] scsi4 : ahci
    [ 2.386043] scsi5 : ahci
    [ 2.386296] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
    [ 2.386298] ata2: DUMMY
    [ 2.386302] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
    [ 2.386303] ata4: DUMMY
    [ 2.386304] ata5: DUMMY
    [ 2.386305] ata6: DUMMY
    [ 2.499498] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
    [ 2.499623] xHCI xhci_add_endpoint called for root hub
    [ 2.499625] xHCI xhci_check_bandwidth called for root hub
    [ 2.499650] hub 3-0:1.0: USB hub found
    [ 2.499655] hub 3-0:1.0: 1 port detected
    [ 2.499701] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 2.499707] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
    [ 2.499773] xHCI xhci_add_endpoint called for root hub
    [ 2.499775] xHCI xhci_check_bandwidth called for root hub
    [ 2.499793] hub 4-0:1.0: USB hub found
    [ 2.499799] hub 4-0:1.0: 1 port detected
    [ 2.668242] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 2.704896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.704948] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.706090] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.706102] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.706110] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.706942] ata1.00: ATA-8: ST9500423AS, 0002SDM1, max UDMA/133
    [ 2.706951] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.708085] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.708096] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.708128] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.708250] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.708253] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.708256] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.708955] ata1.00: configured for UDMA/133
    [ 2.709184] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
    [ 2.710001] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ASW, 1.00, max UDMA/100
    [ 2.713629] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.713640] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.713648] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.715460] ata3.00: configured for UDMA/100
    [ 2.721215] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2ASW 1.00 PQ: 0 ANSI: 5
    [ 2.726730] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.726735] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.726769] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.726772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.726796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.730604] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.730613] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.730825] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.744374] sda: sda1 sda2 sda3 sda4
    [ 2.744800] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.792361] hub 1-1:1.0: USB hub found
    [ 2.792438] hub 1-1:1.0: 6 ports detected
    [ 2.898039] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 3.022001] hub 2-1:1.0: USB hub found
    [ 3.022058] hub 2-1:1.0: 6 ports detected
    [ 3.047955] Refined TSC clocksource calibration: 2294.788 MHz.
    [ 3.047965] Switching to clocksource tsc
    [ 3.088035] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
    [ 3.154812] usb 1-1.1: device descriptor read/64, error -32
    [ 3.236960] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
    [ 3.236965] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
    [ 3.236973] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
    [ 3.236982] PM: Marking nosave pages: 00000000aabcc000 - 00000000aacdf000
    [ 3.236987] PM: Marking nosave pages: 00000000aace1000 - 00000000aacf4000
    [ 3.236989] PM: Marking nosave pages: 00000000aacf5000 - 00000000aade8000
    [ 3.236994] PM: Marking nosave pages: 00000000aaf19000 - 00000000aafe8000
    [ 3.236998] PM: Marking nosave pages: 00000000aaffd000 - 0000000100000000
    [ 3.238148] PM: Basic memory bitmaps created
    [ 3.256065] PM: Basic memory bitmaps freed
    [ 3.281008] EXT3-fs: barriers not enabled
    [ 3.293754] kjournald starting. Commit interval 5 seconds
    [ 3.293785] EXT3-fs (sda3): mounted filesystem with ordered data mode
    [ 3.408060] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 4.495259] udevd[256]: starting version 173
    [ 4.578020] ACPI: acpi_idle yielding to intel_idle
    [ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 4.627906] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.628446] ACPI: AC Adapter [AC0] (on-line)
    [ 4.629029] ACPI: Lid Switch [LID]
    [ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.629603] ACPI: Sleep Button [SLPB]
    [ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.629658] ACPI: Power Button [PWRF]
    [ 4.662098] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.662105] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.670264] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.670270] ACPI: Thermal Zone [TZ00] (58 C)
    [ 4.699183] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 4.699224] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [ 4.735002] wmi: Mapper loaded
    [ 4.816453] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.837422] Linux media interface: v0.10
    [ 4.865736] Linux video capture interface: v2.00
    [ 4.900747] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
    [ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
    [ 4.903716] usbcore: registered new interface driver uvcvideo
    [ 4.903718] USB Video Class driver (v1.1.0)
    [ 4.911301] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.911316] ath9k 0000:03:00.0: setting latency timer to 64
    [ 4.919790] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.919846] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 4.919869] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.927271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 4.935157] asus_wmi: ASUS WMI generic driver loaded
    [ 4.941164] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.943980] asus_wmi: Initialization: 0x1
    [ 4.944133] asus_wmi: SFUN value: 0x1a0af7
    [ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
    [ 4.956683] asus_wmi: Backlight controlled by ACPI video driver
    [ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 4.960798] ath: EEPROM regdomain: 0x60
    [ 4.960800] ath: EEPROM indicates we should expect a direct regpair map
    [ 4.960802] ath: Country alpha2 being used: 00
    [ 4.960803] ath: Regpair used: 0x60
    [ 4.974078] Bluetooth: Core ver 2.16
    [ 4.974096] NET: Registered protocol family 31
    [ 4.974097] Bluetooth: HCI device and connection manager initialized
    [ 4.974098] Bluetooth: HCI socket layer initialized
    [ 4.974099] Bluetooth: L2CAP socket layer initialized
    [ 4.974302] Bluetooth: SCO socket layer initialized
    [ 4.984561] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 4.984762] Registered led device: ath9k-phy0
    [ 4.984768] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005360000, irq=17
    [ 4.999019] iTCO_vendor_support: vendor-support=0
    [ 5.000922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.000993] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 5.001120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.013874] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 5.014040] usbcore: registered new interface driver btusb
    [ 5.026354] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.026365] atl1c 0000:05:00.0: setting latency timer to 64
    [ 5.140660] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
    [ 5.493359] hda_codec: ALC269VB: BIOS auto-probing.
    [ 5.525717] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.528376] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.528381] mei 0000:00:16.0: setting latency timer to 64
    [ 5.535903] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.536243] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 5.536438] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.537725] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.537829] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 5.566314] [drm] Initialized drm 1.1.0 20060810
    [ 5.578198] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.578202] i915 0000:00:02.0: setting latency timer to 64
    [ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
    [ 5.640873] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 5.640878] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.640879] [drm] Driver supports precise vblank timestamp query.
    [ 5.640934] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
    [ 5.641035] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
    [ 5.641105] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.641106] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
    [ 5.817467] fbcon: inteldrmfb (fb0) is primary device
    [ 5.981060] Console: switching to colour frame buffer device 170x48
    [ 5.982871] fb0: inteldrmfb frame buffer device
    [ 5.982872] drm: registered panic notifier
    [ 6.010757] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 6.011024] acpi device:4e: registered as cooling_device4
    [ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 6.011212] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.011736] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 6.011930] acpi device:59: registered as cooling_device5
    [ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
    [ 6.012073] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    [ 6.012134] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.806806] EXT3-fs (sda3): using internal journal
    [ 7.032629] EXT3-fs: barriers not enabled
    [ 7.033131] kjournald starting. Commit interval 5 seconds
    [ 7.033638] EXT3-fs (sda4): using internal journal
    [ 7.033650] EXT3-fs (sda4): mounted filesystem with ordered data mode
    [ 7.136750] Adding 2097140k swap on /dev/sda2. Priority:-1 extents:1 across:2097140k
    [ 8.830153] NET: Registered protocol family 10
    [ 9.400174] ehci_hcd 0000:00:1d.0: PCI INT A disabled
    [ 9.400249] ehci_hcd 0000:00:1d.0: PME# enabled
    [ 9.413816] xhci_hcd 0000:04:00.0: PCI INT A disabled
    [ 9.413916] xhci_hcd 0000:04:00.0: PME# enabled
    [ 9.644602] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xdf007000-0xdf0073ff] (PCI address [0xdf007000-0xdf0073ff])
    [ 9.644638] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
    [ 9.644679] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [ 9.644796] ehci_hcd 0000:00:1d.0: PME# disabled
    [ 9.644816] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 9.644828] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 9.754551] xhci_hcd 0000:04:00.0: BAR 0: set to [mem 0xdd200000-0xdd20ffff] (PCI address [0xdd200000-0xdd20ffff])
    [ 9.754699] xhci_hcd 0000:04:00.0: PME# disabled
    [ 9.754721] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 9.754736] xhci_hcd 0000:04:00.0: setting latency timer to 64
    [ 9.754760] usb usb3: root hub lost power or was reset
    [ 9.754764] usb usb4: root hub lost power or was reset
    [ 167.112308] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
    [ 167.112437] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
    [ 177.751730] eth0: no IPv6 routers present
    $ dmesg | grep -i input
    [ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
    [ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
    [ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
    [ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
    $ cat /sys/class/input/mouse0/device/uevent
    PRODUCT=11/2/1/63
    NAME="PS/2 Logitech Wheel Mouse"
    PHYS="isa0060/serio4/input0"
    PROP=0
    EV=7
    KEY=70000 0 0 0 0
    REL=103
    MODALIAS=input:b0011v0002p0001e0063-e0,1,2,k110,111,112,r0,1,8,amlsfw
    $ cat /var/log/Xorg.0.log
    [ 232.348]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 232.349]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 232.349] X Protocol Version 11, Revision 0
    [ 232.349] Build Operating System: Linux 3.0.0-ARCH x86_64
    [ 232.349] Current Operating System: Linux asdfg 3.0-ARCH #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011 x86_64
    [ 232.350] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 232.350] Build Date: 08 August 2011 08:24:13AM
    [ 232.350]
    [ 232.350] Current version of pixman: 0.22.2
    [ 232.350] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 232.350] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 232.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 17 19:58:21 2011
    [ 232.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 232.406] (==) No Layout section. Using the first Screen section.
    [ 232.406] (==) No screen section available. Using defaults.
    [ 232.406] (**) |-->Screen "Default Screen Section" (0)
    [ 232.406] (**) | |-->Monitor "<default monitor>"
    [ 232.406] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 232.407] (==) Automatically adding devices
    [ 232.407] (==) Automatically enabling devices
    [ 232.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 232.464] Entry deleted from font path.
    [ 232.464] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 232.464] Entry deleted from font path.
    [ 232.464] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 232.465] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 232.465] Entry deleted from font path.
    [ 232.465] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 232.465] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 232.465] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 232.465] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 232.465] (II) Loader magic: 0x7d3620
    [ 232.465] (II) Module ABI versions:
    [ 232.465] X.Org ANSI C Emulation: 0.4
    [ 232.465] X.Org Video Driver: 10.0
    [ 232.465] X.Org XInput driver : 12.2
    [ 232.465] X.Org Server Extension : 5.0
    [ 232.466] (--) PCI:*(0:0:2:0) 8086:0116:1043:1662 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
    [ 232.466] (--) PCI: (0:1:0:0) 10de:0df4:1043:1662 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 232.466] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 232.466] (II) LoadModule: "extmod"
    [ 232.498] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 232.500] (II) Module extmod: vendor="X.Org Foundation"
    [ 232.500] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.500] Module class: X.Org Server Extension
    [ 232.500] ABI class: X.Org Server Extension, version 5.0
    [ 232.500] (II) Loading extension MIT-SCREEN-SAVER
    [ 232.500] (II) Loading extension XFree86-VidModeExtension
    [ 232.500] (II) Loading extension XFree86-DGA
    [ 232.500] (II) Loading extension DPMS
    [ 232.500] (II) Loading extension XVideo
    [ 232.500] (II) Loading extension XVideo-MotionCompensation
    [ 232.500] (II) Loading extension X-Resource
    [ 232.500] (II) LoadModule: "dbe"
    [ 232.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 232.501] (II) Module dbe: vendor="X.Org Foundation"
    [ 232.501] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.501] Module class: X.Org Server Extension
    [ 232.501] ABI class: X.Org Server Extension, version 5.0
    [ 232.501] (II) Loading extension DOUBLE-BUFFER
    [ 232.501] (II) LoadModule: "glx"
    [ 232.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 232.517] (II) Module glx: vendor="X.Org Foundation"
    [ 232.517] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.517] ABI class: X.Org Server Extension, version 5.0
    [ 232.517] (==) AIGLX enabled
    [ 232.517] (II) Loading extension GLX
    [ 232.517] (II) LoadModule: "record"
    [ 232.517] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 232.518] (II) Module record: vendor="X.Org Foundation"
    [ 232.518] compiled for 1.10.3.901, module version = 1.13.0
    [ 232.518] Module class: X.Org Server Extension
    [ 232.518] ABI class: X.Org Server Extension, version 5.0
    [ 232.518] (II) Loading extension RECORD
    [ 232.518] (II) LoadModule: "dri"
    [ 232.519] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 232.536] (II) Module dri: vendor="X.Org Foundation"
    [ 232.536] compiled for 1.10.3.901, module version = 1.0.0
    [ 232

    Interestingly enough, the same thing happens in Windows on my U46E - the Synaptics driver recognizes the touchpad only as a PS/2 mouse and two-finger scroll won't work.
    Edit: The elantech module you posted fixes the problem on the U46E, too. Thanks! Now to fix it for Windows...
    Last edited by kalinatek (2011-08-29 20:13:07)

  • Alps Touchpad detected as PS2 Generic mouse on Dell Inspiron N5110 15R

    I Started this thread 2 months ago , at first I was asking for a solution and I didn't get one , So I repeated that thread on different distros forums but I get the same results because of a simple fact that there is no one have solution !! , So I realized that the best way to solve this problem is to gather our forces here so we can create a solution 
    The Bug :  xinput-list shows PS/2  Generic mouse instead of  Alps touchpad  so multi-touch gestures is not possible ( Probably an unknown alps protocol )
    The Effected Laptops : Dell Inspiron N5110 ,  Acer Aspire V3-771G-9875  , ......... (You name it)
    Update 1- installing kernel 3.5.2 from test repos didn't solve the problem
    Update 2- installing  psmouse-elantech from AUR (as wiki says )  didn't solve the problem it only made xinput-list identifies it as ps/2 elantech mouse 
    Update 3- installing psmouse-alps from AUR don't have any impact
    Update 4- installing extra/xf86-input-evdev and extra/xf86-input-synaptics  don't have any impact
    Update 5- Here are bug reports links :
    https://bugs.launchpad.net/ubuntu/+sour … bug/606238
    https://bugs.launchpad.net/ubuntu/+sour … bug/977063
    https://bugzilla.kernel.org/show_bug.cgi?id=45201
    Update 6- I contacted Dell ,They says it's Alps responsibility and i contacted alps , They says it's Dell responsibility  ( I hate those shitty formal replies )
    Update 7- After Some Google-ing  I found that a developer managed to brake the unknown alps protocol on dell latitude E6230 which is very similar to our alps protocol , so If any developer owns n5110 please take a look at this  http://markmail.org/message/r62dimyqb6f … te:results  you might find a clue or a trace to brake that protocol
    In the end please keep this thread alive as possible with every new finding , Suggestion ,workaround , possible solution until we solve this F***N bug
    Last edited by t-r-e (2012-08-24 03:40:01)

    Did you try the 'proto' parameter?
    [laloch@uriel ~]$ modinfo psmouse
    filename: /lib/modules/3.4.4-2-ARCH/kernel/drivers/input/mouse/psmouse.ko.gz
    license: GPL
    description: PS/2 mouse driver
    author: Vojtech Pavlik <[email protected]>
    alias: serio:ty05pr*id*ex*
    alias: serio:ty01pr*id*ex*
    depends:
    intree: Y
    vermagic: 3.4.4-2-ARCH SMP preempt mod_unload modversions
    parm: proto:Highest protocol extension to probe (bare, imps, exps, any). Useful for KVM switches. (proto_abbrev)
    parm: resolution:Resolution, in dpi. (uint)
    parm: rate:Report rate, in reports per second. (uint)
    parm: smartscroll:Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled. (bool)
    parm: resetafter:Reset device after so many bad packets (0 = never). (uint)
    parm: resync_time:How long can mouse stay idle before forcing resync (in seconds, 0 = never). (uint)

  • Is it possible to make flash detect the location of the mouse and....

    Hello
    I'm looking for a script in AS2 that can detect the location of the mouse and when you leave the zone it trigger an action. This script need to detect the location of the mouse without interference of any other object inside the zone ( that include button ) and without "blocking" those object because of the invisible zone that could be on top of it.
    I know the trick about the invisible button where you detect the mouseover with it, when you place it under all your stuff ( so that your mouse can navigate in peace ).
    The main probleme will be that tee flash will be smaller than the viewscreen so it need to detect imediatly and at any speed the mouse leaving it's location. So the button trick is a no-go because too slow. Also because the website will need to auto-adapt to your viewscreen.
    I need to be able to set the X and Y position of the mouse and i don't know.. does it require to put in the script the boundary location of the zone itself ? left top bottom right side ?
    Right now i have a flash of 2000 px large and it is centering itself perfectly, But however, i get a horizontal scrolling bar that i want to get rid off. I am exploring all possible solution.
    Dreamweaver forum link : http://forums.adobe.com/thread/613249?tstart=0 about my probleme with more detail. I am considering resizing the flash ( and having to move everything inside it for that... ) down from 2000 to 950px large, So when the user leave the zone inside the flash in a quick move the script need to detect before it leave the flash zone. I know that AS3 so it, but i have no time nor ressource to translate to AS3 the whole flash.
    Thanks !

    Probleme solved without having to change anything in the flash.
    The solution was to add a small part in the CSS in HTML
    html {
    overflow-x: hidden;
    overflow-y: auto;
    Solve probleme. All browser. VERY usefull to know !

  • My Mouse pad alway error ( Stop Working ) when I use firefox browser ! I Try To Reinstall Firefox And Reinstall my OS but it Can not helps ! My Computer Is : Dell Vostro V 130 , Windows 7 64-bit Home Premium !! Pls Help Me !!

    My Mose Pad Has Stop Working ! But My external mouse ( laser Mouse ) can work , i try to install other version of firefox ( thunder bird, aurora) but it still the same , even if I reinstall my windows ( my OS is Windows 64-bit Home Premium ) My Computer is Dell Vostro V130.

    Hi,
    In this case, you can try repairing windows image using DISM command.
    http://technet.microsoft.com/en-us/library/hh824869.aspx
    If it still can't work, please make a repair install to fix your system.
    http://support.microsoft.com/kb/2255099
    Andy Altmann
    TechNet Community Support

  • Windows 7 will not detect the wireless adapter on my Dell D610 laptop

    Windows 7 will not detect the wireless adapter on my Dell D610 laptop
    Any workaround?

    hey guys.... i believe i have some light for you all. I gave my daughter a D610 which came pre-installed with Linux (ubuntu). She did not like it so i loaded windows 7 and guess what? no wifi.
    Unknown Device listed on device manager. to make the story short, after almost returning the laptop and spending 2 days looking for drivers everywhere I decided to reload Ubuntu because the wifi always worked. Then going a little deeper inside linux hardware
    specs I listed all the hardware using the command lshw from linux shell and what shows up as wifi interface? Atheros AR5001x.
    Problem was almost solved. The adventure now was find the driver for Atheros AR5001x that worked for windows 7. And now just to finish this story even faster, the diver is xp32-5.1.1.9.
    Unfortunately after downloading the driver I did not save the website. I have the file with me if you need.
    Just send me a message and i will be more than happy to email it to you.
    Happy New Year for all!!!!

  • Touchpad detected as ImPS/2 Logitech Wheel Mouse

    I have an Asus laptop (not an eee pc), and my touchpad is detected incorrectly.  It thinks it is a "ImPS/2 Logitech Wheel Mouse."  I have tried to use the synaptics driver by configuring /etc/hal/fdi/policy/11-x11-synaptics.fdi
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <deviceinfo version="0.2">
    <device>
    <match key="info.product" contains="ImPS/2 Logitech Wheel Mouse">
    <append key="info.capabilities" type="strlist">input.touchpad</append>
    </match>
    <match key="info.capabilities" contains="input.touchpad">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    <merge key="input.x11_options.SHMConfig" type="string">true</merge>
    <merge key="input.x11_options.TapButton1" type="string">1</merge>
    <merge key="input.x11_options.TapButton2" type="string">2</merge>
    <merge key="input.x11_options.TapButton3" type="string">3</merge>
    </match>
    </device>
    </deviceinfo>
    but this causes the touchpad to stop working entirely.  Here is the relevant section of my Xorg.0.log
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event7"
    (**) Option "SHMConfig" "true"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) ImPS/2 Logitech Wheel Mouse: no supported touchpad found
    (EE) ImPS/2 Logitech Wheel Mouse Unable to query/initialize Synaptics hardware.
    (EE) PreInit failed for input device "ImPS/2 Logitech Wheel Mouse"
    (II) UnloadModule: "synaptics"
    also here is the incorrect entry from /proc/bus/input/devices
    I: Bus=0011 Vendor=0002 Product=0005 Version=0063
    N: Name="ImPS/2 Logitech Wheel Mouse"
    P: Phys=isa0060/serio4/input0
    S: Sysfs=/devices/platform/i8042/serio4/input/input7
    U: Uniq=
    H: Handlers=mouse1 event7
    B: EV=7
    B: KEY=70000 0 0 0 0
    B: REL=1036
    Is there some way I can let my system know that this is indeed a touchpad so I can configure it properly?

    I can't really gather anything useful from dmesg.  Here's the possibly relevant output:
    $ dmesg | grep -i input
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    input: Asus Laptop extra buttons as /devices/virtual/input/input6
    input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input8
    $ dmesg | grep -i logitech
    input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
    $ dmesg | grep -i -C 3 touchpad
    asus-laptop: K40IN model detected
    asus-laptop: Brightness ignored, must be controlled by ACPI video driver
    input: Asus Laptop extra buttons as /devices/virtual/input/input6
    Registered led device: asus::touchpad
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    ACPI: Battery Slot [BAT0] (battery present)
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
    There's nothing about synaptics anywhere.
    Is there anything potentially useful here?

  • Touchpad not recongnized and working as mouse

    Hello,
    I don't have a physical mouse on my dell m4600 laptop, just using the touchpad. It works, but works as a mouse. So i can't do any two finger scrolling etc, and in Mouse & Touchpad system settings there's only a mouse tab.
    xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Generic Mouse id=12 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ Laptop_Integrated_Webcam_FHD id=10 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
    ↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
    i've installed xf86-input-synaptics and here's the 10-synaptics.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    EndSection
    Xorg.0.log
    [ 11.582]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 11.582]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 11.582] X Protocol Version 11, Revision 0
    [ 11.582] Build Operating System: Linux 3.0.0-ARCH x86_64
    [ 11.582] Current Operating System: Linux precision 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
    [ 11.582] Kernel command line: root=/dev/sda6 ro
    [ 11.582] Build Date: 08 August 2011 08:24:13AM
    [ 11.582]
    [ 11.582] Current version of pixman: 0.22.2
    [ 11.582] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.582] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.582] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 31 10:05:33 2011
    [ 11.584] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.586] (==) No Layout section. Using the first Screen section.
    [ 11.586] (==) No screen section available. Using defaults.
    [ 11.586] (**) |-->Screen "Default Screen Section" (0)
    [ 11.586] (**) | |-->Monitor "<default monitor>"
    [ 11.586] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 11.586] (==) Automatically adding devices
    [ 11.586] (==) Automatically enabling devices
    [ 11.588] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.588] Entry deleted from font path.
    [ 11.589] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.589] Entry deleted from font path.
    [ 11.589] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.589] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.589] Entry deleted from font path.
    [ 11.589] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.589] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 11.589] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.589] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 11.589] (II) Loader magic: 0x7d3620
    [ 11.589] (II) Module ABI versions:
    [ 11.589] X.Org ANSI C Emulation: 0.4
    [ 11.589] X.Org Video Driver: 10.0
    [ 11.589] X.Org XInput driver : 12.2
    [ 11.589] X.Org Server Extension : 5.0
    [ 11.590] (--) PCI:*(0:1:0:0) 1002:6740:1028:04a3 rev 0, Mem @ 0xd0000000/268435456, 0xe3820000/131072, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
    [ 11.590] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 11.590] (II) LoadModule: "extmod"
    [ 11.593] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 11.595] (II) Module extmod: vendor="X.Org Foundation"
    [ 11.595] compiled for 1.10.3.901, module version = 1.0.0
    [ 11.595] Module class: X.Org Server Extension
    [ 11.595] ABI class: X.Org Server Extension, version 5.0
    [ 11.595] (II) Loading extension MIT-SCREEN-SAVER
    [ 11.595] (II) Loading extension XFree86-VidModeExtension
    [ 11.595] (II) Loading extension XFree86-DGA
    [ 11.595] (II) Loading extension DPMS
    [ 11.595] (II) Loading extension XVideo
    [ 11.595] (II) Loading extension XVideo-MotionCompensation
    [ 11.595] (II) Loading extension X-Resource
    [ 11.595] (II) LoadModule: "dbe"
    [ 11.595] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 11.596] (II) Module dbe: vendor="X.Org Foundation"
    [ 11.596] compiled for 1.10.3.901, module version = 1.0.0
    [ 11.596] Module class: X.Org Server Extension
    [ 11.596] ABI class: X.Org Server Extension, version 5.0
    [ 11.596] (II) Loading extension DOUBLE-BUFFER
    [ 11.596] (II) LoadModule: "glx"
    [ 11.596] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.599] (II) Module glx: vendor="X.Org Foundation"
    [ 11.599] compiled for 1.10.3.901, module version = 1.0.0
    [ 11.599] ABI class: X.Org Server Extension, version 5.0
    [ 11.599] (==) AIGLX enabled
    [ 11.599] (II) Loading extension GLX
    [ 11.600] (II) LoadModule: "record"
    [ 11.600] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 11.601] (II) Module record: vendor="X.Org Foundation"
    [ 11.601] compiled for 1.10.3.901, module version = 1.13.0
    [ 11.601] Module class: X.Org Server Extension
    [ 11.601] ABI class: X.Org Server Extension, version 5.0
    [ 11.601] (II) Loading extension RECORD
    [ 11.601] (II) LoadModule: "dri"
    [ 11.601] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 11.603] (II) Module dri: vendor="X.Org Foundation"
    [ 11.603] compiled for 1.10.3.901, module version = 1.0.0
    [ 11.603] ABI class: X.Org Server Extension, version 5.0
    [ 11.603] (II) Loading extension XFree86-DRI
    [ 11.603] (II) LoadModule: "dri2"
    [ 11.603] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 11.604] (II) Module dri2: vendor="X.Org Foundation"
    [ 11.604] compiled for 1.10.3.901, module version = 1.2.0
    [ 11.604] ABI class: X.Org Server Extension, version 5.0
    [ 11.604] (II) Loading extension DRI2
    [ 11.604] (==) Matched ati as autoconfigured driver 0
    [ 11.604] (==) Matched vesa as autoconfigured driver 1
    [ 11.604] (==) Matched fbdev as autoconfigured driver 2
    [ 11.604] (==) Assigned the driver to the xf86ConfigLayout
    [ 11.604] (II) LoadModule: "ati"
    [ 11.604] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 11.605] (II) Module ati: vendor="X.Org Foundation"
    [ 11.605] compiled for 1.10.1, module version = 6.14.2
    [ 11.605] Module class: X.Org Video Driver
    [ 11.605] ABI class: X.Org Video Driver, version 10.0
    [ 11.605] (II) LoadModule: "radeon"
    [ 11.605] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 11.610] (II) Module radeon: vendor="X.Org Foundation"
    [ 11.610] compiled for 1.10.1, module version = 6.14.2
    [ 11.610] Module class: X.Org Video Driver
    [ 11.610] ABI class: X.Org Video Driver, version 10.0
    [ 11.611] (II) LoadModule: "vesa"
    [ 11.612] (WW) Warning, couldn't open module vesa
    [ 11.612] (II) UnloadModule: "vesa"
    [ 11.612] (II) Unloading vesa
    [ 11.612] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 11.612] (II) LoadModule: "fbdev"
    [ 11.612] (WW) Warning, couldn't open module fbdev
    [ 11.612] (II) UnloadModule: "fbdev"
    [ 11.612] (II) Unloading fbdev
    [ 11.612] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 11.612] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
    ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
    ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS
    [ 11.619] (++) using VT number 7
    [ 11.622] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 11.622] (II) [KMS] Kernel modesetting enabled.
    [ 11.623] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 11.623] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 11.623] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 11.623] (==) RADEON(0): Default visual is TrueColor
    [ 11.623] (==) RADEON(0): RGB weight 888
    [ 11.623] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 11.623] (--) RADEON(0): Chipset: "TURKS" (ChipID = 0x6740)
    [ 11.623] (II) RADEON(0): PCIE card detected
    [ 11.623] drmOpenDevice: node name is /dev/dri/card0
    [ 11.623] drmOpenDevice: open result is 9, (OK)
    [ 11.623] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 11.623] drmOpenDevice: node name is /dev/dri/card0
    [ 11.623] drmOpenDevice: open result is 9, (OK)
    [ 11.623] drmOpenByBusid: drmOpenMinor returns 9
    [ 11.623] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 11.623] (II) Loading sub module "exa"
    [ 11.623] (II) LoadModule: "exa"
    [ 11.623] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 11.624] (II) Module exa: vendor="X.Org Foundation"
    [ 11.624] compiled for 1.10.3.901, module version = 2.5.0
    [ 11.624] ABI class: X.Org Video Driver, version 10.0
    [ 11.625] (II) RADEON(0): KMS Color Tiling: disabled
    [ 11.625] (II) RADEON(0): KMS Pageflipping: enabled
    [ 11.625] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 11.625] (II) RADEON(0): Output LVDS has no monitor section
    [ 11.636] (II) RADEON(0): Output DisplayPort-0 has no monitor section
    [ 11.650] (II) RADEON(0): Output DisplayPort-1 has no monitor section
    [ 11.663] (II) RADEON(0): Output DisplayPort-2 has no monitor section
    [ 11.683] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 11.684] (II) RADEON(0): EDID for output LVDS
    [ 11.684] (II) RADEON(0): Manufacturer: LGD Model: 2d9 Serial#: 0
    [ 11.684] (II) RADEON(0): Year: 2010 Week: 0
    [ 11.684] (II) RADEON(0): EDID Version: 1.4
    [ 11.684] (II) RADEON(0): Digital Display Input
    [ 11.684] (II) RADEON(0): 6 bits per channel
    [ 11.684] (II) RADEON(0): Digital interface is undefined
    [ 11.684] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 11.684] (II) RADEON(0): Gamma: 2.20
    [ 11.684] (II) RADEON(0): No DPMS capabilities specified
    [ 11.684] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 11.684] (II) RADEON(0): First detailed timing is preferred mode
    [ 11.684] (II) RADEON(0): Preferred mode is native pixel format and refresh rate
    [ 11.684] (II) RADEON(0): redX: 0.617 redY: 0.349 greenX: 0.313 greenY: 0.595
    [ 11.684] (II) RADEON(0): blueX: 0.151 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
    [ 11.684] (II) RADEON(0): Manufacturer's mask: 0
    [ 11.684] (II) RADEON(0): Supported detailed timing:
    [ 11.684] (II) RADEON(0): clock: 139.5 MHz Image Size: 344 x 194 mm
    [ 11.684] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2096 h_border: 0
    [ 11.684] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 11.684] (II) RADEON(0): Supported detailed timing:
    [ 11.684] (II) RADEON(0): clock: 93.0 MHz Image Size: 344 x 194 mm
    [ 11.684] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2096 h_border: 0
    [ 11.684] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 11.684] (II) RADEON(0): MC6JN156WF1
    [ 11.684] (II) RADEON(0): Unknown vendor-specific block 0
    [ 11.684] (II) RADEON(0): EDID (in hex):
    [ 11.684] (II) RADEON(0): 00ffffffffffff0030e4d90200000000
    [ 11.684] (II) RADEON(0): 00140104902213780a15d59e59509826
    [ 11.684] (II) RADEON(0): 0e505400000001010101010101010101
    [ 11.684] (II) RADEON(0): 0101010101017e3680b070381f403020
    [ 11.684] (II) RADEON(0): 350058c210000018542480b070381f40
    [ 11.684] (II) RADEON(0): 3020350058c210000018000000fe004d
    [ 11.684] (II) RADEON(0): 43364a4e813135365746310a00000000
    [ 11.684] (II) RADEON(0): 000041319e0000000002010a20200030
    [ 11.684] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 11.685] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 11.685] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 11.685] (II) RADEON(0): Printing probed modes for output LVDS
    [ 11.685] (II) RADEON(0): Modeline "1920x1080"x59.9 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1920x1080"x39.9 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 11.685] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 11.685] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 11.685] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 11.685] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 11.685] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 11.696] (II) RADEON(0): EDID for output DisplayPort-0
    [ 11.710] (II) RADEON(0): EDID for output DisplayPort-1
    [ 11.723] (II) RADEON(0): EDID for output DisplayPort-2
    [ 11.743] (II) RADEON(0): EDID for output VGA-0
    [ 11.743] (II) RADEON(0): Output LVDS connected
    [ 11.743] (II) RADEON(0): Output DisplayPort-0 disconnected
    [ 11.743] (II) RADEON(0): Output DisplayPort-1 disconnected
    [ 11.743] (II) RADEON(0): Output DisplayPort-2 disconnected
    [ 11.743] (II) RADEON(0): Output VGA-0 disconnected
    [ 11.743] (II) RADEON(0): Using exact sizes for initial modes
    [ 11.743] (II) RADEON(0): Output LVDS using initial mode 1920x1080
    [ 11.743] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 11.743] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:f7d7000
    [ 11.743] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 11.743] (**) RADEON(0): Display dimensions: (340, 190) mm
    [ 11.743] (**) RADEON(0): DPI set to (143, 144)
    [ 11.743] (II) Loading sub module "fb"
    [ 11.743] (II) LoadModule: "fb"
    [ 11.743] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.745] (II) Module fb: vendor="X.Org Foundation"
    [ 11.745] compiled for 1.10.3.901, module version = 1.0.0
    [ 11.745] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.745] (II) Loading sub module "ramdac"
    [ 11.745] (II) LoadModule: "ramdac"
    [ 11.745] (II) Module "ramdac" already built-in
    [ 11.745] (--) Depth 24 pixmap format is 32 bpp
    [ 11.745] (II) RADEON(0): [DRI2] Setup complete
    [ 11.745] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 11.745] (II) RADEON(0): Front buffer size: 8100K
    [ 11.746] (II) RADEON(0): VRAM usage limit set to 221119K
    [ 11.748] (==) RADEON(0): Backing store disabled
    [ 11.748] (II) RADEON(0): Direct rendering enabled
    [ 11.749] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 11.749] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 11.749] (II) EXA(0): Driver registered support for the following operations:
    [ 11.749] (II) Solid
    [ 11.749] (II) Copy
    [ 11.749] (II) Composite (RENDER acceleration)
    [ 11.749] (II) UploadToScreen
    [ 11.749] (II) DownloadFromScreen
    [ 11.749] (II) RADEON(0): Acceleration enabled
    [ 11.749] (==) RADEON(0): DPMS enabled
    [ 11.749] (==) RADEON(0): Silken mouse enabled
    [ 11.751] (II) RADEON(0): Set up textured video
    [ 11.751] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 11.751] (--) RandR disabled
    [ 11.751] (II) Initializing built-in extension Generic Event Extension
    [ 11.751] (II) Initializing built-in extension SHAPE
    [ 11.751] (II) Initializing built-in extension MIT-SHM
    [ 11.751] (II) Initializing built-in extension XInputExtension
    [ 11.751] (II) Initializing built-in extension XTEST
    [ 11.751] (II) Initializing built-in extension BIG-REQUESTS
    [ 11.751] (II) Initializing built-in extension SYNC
    [ 11.751] (II) Initializing built-in extension XKEYBOARD
    [ 11.751] (II) Initializing built-in extension XC-MISC
    [ 11.751] (II) Initializing built-in extension SECURITY
    [ 11.751] (II) Initializing built-in extension XINERAMA
    [ 11.751] (II) Initializing built-in extension XFIXES
    [ 11.751] (II) Initializing built-in extension RENDER
    [ 11.751] (II) Initializing built-in extension RANDR
    [ 11.751] (II) Initializing built-in extension COMPOSITE
    [ 11.751] (II) Initializing built-in extension DAMAGE
    [ 11.810] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 11.810] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 11.810] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 11.810] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 11.810] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 11.811] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
    [ 11.811] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 11.813] (II) RADEON(0): Setting screen physical size to 508 x 285
    [ 11.896] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 11.896] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 11.896] (II) LoadModule: "evdev"
    [ 11.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.897] (II) Module evdev: vendor="X.Org Foundation"
    [ 11.897] compiled for 1.10.0, module version = 2.6.0
    [ 11.897] Module class: X.Org XInput Driver
    [ 11.897] ABI class: X.Org XInput driver, version 12.2
    [ 11.897] (II) Using input driver 'evdev' for 'Power Button'
    [ 11.897] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.897] (**) Power Button: always reports core events
    [ 11.897] (**) Power Button: Device: "/dev/input/event4"
    [ 11.897] (--) Power Button: Found keys
    [ 11.897] (II) Power Button: Configuring as keyboard
    [ 11.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 11.897] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 11.897] (**) Option "xkb_rules" "evdev"
    [ 11.897] (**) Option "xkb_model" "evdev"
    [ 11.897] (**) Option "xkb_layout" "gb"
    [ 11.934] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 11.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 11.934] (II) Using input driver 'evdev' for 'Video Bus'
    [ 11.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.934] (**) Video Bus: always reports core events
    [ 11.934] (**) Video Bus: Device: "/dev/input/event13"
    [ 11.934] (--) Video Bus: Found keys
    [ 11.934] (II) Video Bus: Configuring as keyboard
    [ 11.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/LNXVIDEO:00/input/input13/event13"
    [ 11.934] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 11.934] (**) Option "xkb_rules" "evdev"
    [ 11.934] (**) Option "xkb_model" "evdev"
    [ 11.934] (**) Option "xkb_layout" "gb"
    [ 11.935] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 11.935] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 11.935] (II) Using input driver 'evdev' for 'Power Button'
    [ 11.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.935] (**) Power Button: always reports core events
    [ 11.935] (**) Power Button: Device: "/dev/input/event2"
    [ 11.935] (--) Power Button: Found keys
    [ 11.935] (II) Power Button: Configuring as keyboard
    [ 11.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 11.935] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 11.935] (**) Option "xkb_rules" "evdev"
    [ 11.935] (**) Option "xkb_model" "evdev"
    [ 11.935] (**) Option "xkb_layout" "gb"
    [ 11.935] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 11.935] (II) No input driver/identifier specified (ignoring)
    [ 11.935] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 11.935] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 11.935] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 11.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.935] (**) Sleep Button: always reports core events
    [ 11.935] (**) Sleep Button: Device: "/dev/input/event3"
    [ 11.935] (--) Sleep Button: Found keys
    [ 11.935] (II) Sleep Button: Configuring as keyboard
    [ 11.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 11.935] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 11.935] (**) Option "xkb_rules" "evdev"
    [ 11.936] (**) Option "xkb_model" "evdev"
    [ 11.936] (**) Option "xkb_layout" "gb"
    [ 11.937] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP (/dev/input/event14)
    [ 11.937] (II) No input driver/identifier specified (ignoring)
    [ 11.938] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event6)
    [ 11.938] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
    [ 11.938] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
    [ 11.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.938] (**) Laptop_Integrated_Webcam_FHD: always reports core events
    [ 11.938] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event6"
    [ 11.938] (--) Laptop_Integrated_Webcam_FHD: Found keys
    [ 11.938] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
    [ 11.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6/event6"
    [ 11.938] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD)
    [ 11.939] (**) Option "xkb_rules" "evdev"
    [ 11.939] (**) Option "xkb_model" "evdev"
    [ 11.939] (**) Option "xkb_layout" "gb"
    [ 11.939] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 11.939] (II) No input driver/identifier specified (ignoring)
    [ 11.940] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Left Jack (/dev/input/event10)
    [ 11.940] (II) No input driver/identifier specified (ignoring)
    [ 11.940] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Left Jack (/dev/input/event11)
    [ 11.940] (II) No input driver/identifier specified (ignoring)
    [ 11.940] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Left Jack (/dev/input/event12)
    [ 11.940] (II) No input driver/identifier specified (ignoring)
    [ 11.941] (II) config/udev: Adding input device HDA Intel PCH Mic at Sep Left Jack (/dev/input/event9)
    [ 11.941] (II) No input driver/identifier specified (ignoring)
    [ 11.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 11.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 11.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 11.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.945] (**) AT Translated Set 2 keyboard: always reports core events
    [ 11.945] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 11.945] (--) AT Translated Set 2 keyboard: Found keys
    [ 11.945] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 11.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 11.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 11.945] (**) Option "xkb_rules" "evdev"
    [ 11.945] (**) Option "xkb_model" "evdev"
    [ 11.945] (**) Option "xkb_layout" "gb"
    [ 11.946] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event15)
    [ 11.946] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 11.946] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 11.946] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.946] (**) PS/2 Generic Mouse: always reports core events
    [ 11.946] (**) PS/2 Generic Mouse: Device: "/dev/input/event15"
    [ 11.946] (--) PS/2 Generic Mouse: Found 3 mouse buttons
    [ 11.946] (--) PS/2 Generic Mouse: Found relative axes
    [ 11.946] (--) PS/2 Generic Mouse: Found x and y relative axes
    [ 11.946] (II) PS/2 Generic Mouse: Configuring as mouse
    [ 11.946] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 11.946] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 11.946] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
    [ 11.946] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    [ 11.946] (II) PS/2 Generic Mouse: initialized for relative axes.
    [ 11.946] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 11.946] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
    [ 11.946] (II) No input driver/identifier specified (ignoring)
    [ 11.947] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 11.947] (II) No input driver/identifier specified (ignoring)
    [ 11.948] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
    [ 11.948] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 11.948] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 11.948] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 11.948] (**) Dell WMI hotkeys: always reports core events
    [ 11.948] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
    [ 11.948] (--) Dell WMI hotkeys: Found keys
    [ 11.948] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 11.948] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 11.948] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
    [ 11.948] (**) Option "xkb_rules" "evdev"
    [ 11.948] (**) Option "xkb_model" "evdev"
    [ 11.948] (**) Option "xkb_layout" "gb"
    [ 11.964] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 11.964] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 11.964] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 11.964] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 12.873] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 12.873] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 12.873] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 12.873] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 12.941] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 12.941] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 12.941] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 12.941] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 13.004] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 13.004] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 13.004] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 13.004] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 13.072] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 13.072] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 13.072] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 13.072] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 14.499] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 14.499] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 14.499] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 14.499] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    [ 3592.056] (II) RADEON(0): EDID vendor "LGD", prod id 729
    [ 3592.056] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 3592.056] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
    [ 3592.056] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
    Thanks.

    Have a look at this thread, you might have the same problem, and installing the AUR package from eworm might give you vertical scrolling.
    https://bbs.archlinux.org/viewtopic.php?id=117109

  • [SOLVED] Touchpad detected as keyboard

    Since some week back, most probably because of some update my touchpad stopped working correctly. It's like all the extra functions are gone since there is no scrolling, no tapfunction, and it's extremly sensitive.
    I've read some of the threads on the forum and tried the solutions but found nothing to work. What I've tried:
    1. Comment out the touchpad in /etx/X11/xorg.conf.d/10-evdev.conf
    2. Remove /etc/X11/xorg.conf
    3. Update udev to 168
    4. None of the changes I make to /etc/X11/xorg.conf.d/10-synaptics.conf seem to have any effect at all on the touchpad.
    The configuration now is:
    /etc/X11/xorg.conf.d/10-evdev.conf
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "synaptic"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    /etx/X11/xorg.conf.d/10-synaptic.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchDevicePath "/dev/input/event*"
    MatchIsTouchpad "on"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    Option "VertEdgeScroll" "on"
    EndSection
    And the lines from xorg log containing synaptic:
    [ 705.427] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [ 705.427] (**) Sleep Button: Applying InputClass "evdev touchpad catchall"
    [ 705.427] (**) Sleep Button: Applying InputClass "touchpad catchall"
    [ 705.427] (II) LoadModule: "synaptics"
    [ 705.428] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 705.428] (II) Module synaptics: vendor="X.Org Foundation"
    [ 705.428] compiled for 1.10.0, module version = 1.4.0
    [ 705.428] Module class: X.Org XInput Driver
    [ 705.428] ABI class: X.Org XInput driver, version 12.2
    [ 705.428] (II) Using input driver 'synaptics' for 'Sleep Button'
    [ 705.428] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 705.428] (**) Sleep Button: always reports core events
    [ 705.428] (**) Option "Device" "/dev/input/event4"
    [ 705.560] (--) Sleep Button: invalid x-axis range. defaulting to 1615 - 5685
    [ 705.560] (--) Sleep Button: invalid y-axis range. defaulting to 1729 - 4171
    [ 705.560] (--) Sleep Button: invalid pressure range. defaulting to 0 - 256
    [ 705.560] (--) Sleep Button: invalid finger width range. defaulting to 0 - 16
    [ 705.560] (**) Option "VertEdgeScroll" "on"
    [ 705.560] (**) Option "TapButton1" "1"
    [ 705.560] (**) Option "TapButton2" "2"
    [ 705.560] (**) Option "TapButton3" "3"
    [ 705.666] (--) Sleep Button: no supported touchpad found
    [ 705.666] (EE) Sleep Button Unable to query/initialize Synaptics hardware.
    [ 705.720] (EE) PreInit returned 11 for "Sleep Button"
    [ 705.720] (II) UnloadModule: "synaptics"
    [ 705.720] (II) Unloading synaptics
    [ 705.827] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
    [ 705.827] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev keyboard catchall"
    [ 705.827] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 705.827] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 705.827] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 705.827] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7"
    [ 705.853] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 705.853] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 705.853] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 705.853] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 705.853] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 705.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
    [ 705.853] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 705.853] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 705.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 705.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 705.854] (II) No input driver/identifier specified (ignoring)
    [ 705.854] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 705.854] (II) No input driver/identifier specified (ignoring)
    Last edited by Larsson (2011-04-29 12:09:08)

    Temporarily solved the problem. It was as I suspected, the touchpad was detected as a keyboard and therefor loaded the evdev driver as seen in xorg.log. So I changed the /etx/X11/xorg.conf.d/10-synaptic.conf to match keyboard instead and only for the specific event named in xorg.log. 
    So /etx/X11/xorg.conf.d/10-synaptic.conf:
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event7"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3
    Option "VertEdgeScroll" "on"
    EndSection
    Last edited by Larsson (2011-04-29 12:08:21)

  • How can get the touchpad turned off when my logitech mouse is plugged via usb. when I used control panel to turn off tp it says it is disabled.

    both touchpad and mouse are active even though the touchpad is disabled

    I am saying that the touch pad still is active/turned on/ works, even though it is disabled according to the menu screen that I reach through control panel. It works all the time, in any program I am using. My latest attempt is to delete the software (Alps vers. 7.1207.101.225) but I see that has not worked either. I'm a poor typist and need to watch the keyboard and my thumbs touch the pad and send the cursor and current words somewhere other than the line on which I am trying to write. Very frustrating.[

  • Synaptic touchpad detects hovering finger.

    My synaptic touch pad can detect me finger even if it is hovering 2~3 mm (0.079~0.12 inches).
    This happens only for two finger scroll.
    If for example I am scrolling with the two finger and I lift the one finger in order to single click it is very likely to generate a middle click. If I lift the one finger uncomfortably high the problem doesn't occur.
    Setting FingerLow, FingerHigh high (I can go to 75 before the touchpad becomes unusable) doesn't seem to help.
    Any ideas?

    If I lower FingerLow, FingerHigh values I can move the cursor from a distance of 1+ cm...

  • HT3986 Hello, as a extremely advanced user, after trying to install Targus AMB09EU on 64bit Windows 7, I have reached a stage where no new Bluetooth devices are detected, while Apple wireless kb+mouse still work perfectly, can somebody give any input plea

    The device I tried to install was Targus AMB09EU mouse.
    The end result was losing ability to detect any new Bluetooth devices, although Apple kb+mouse works.
    Any input would be appreciated.

    This really is a question best aimed at Microsoft and Targus user forums, you may not get an answer here.

  • Having touchpad auto disable when external usb mouse is present

    Apparently as hardware and drivers change this feature got dropped. Just purchased a Probook 450 and was very used to my touchpad having the option to turn off when a external usb mouse (logitech wireless) was plugged in. This new system had no such feature and I spent several hours searching for a solution of reason why.
    Finally found one I took a shot on that worked just like I was used too.  Now when usb mouse is inserted the pc pops up message saying touchpad disabled and when unplugged the touchpad comes back on and pc pops up message saying pad enabled. No software change. No hardware change. Just a simple registry edit and feature back on.
    Seems after doing my searches I might as well share this info for those looking for the answer.
    ***disclaimers***
    *make sure your usb mouse works before you do this because if it dose not and this fails to work or you do it wrong you may have no "mouse" to navigate with.
    *warning- editing the windows registry is not something for the clueless*- errors can cause major problems that said this is a very simple simple fix and hp should just perma fix it for all synaptics touchpad laptops.
    *can not test this with non synaptics touchpads tho it may work if you can find the registry entry for that brand*
    *this was done on windows 7 system with Synaptics touch pad and my prior one was windows 7 and so was my wifes dell laptop, all Synaptics, all Windows 7- no clue on windows 8 or vista*
    *if someone has found an easier fix post it because took me hours to even find this*
    Windows 7 OS- Start menu- in the programs and files box at bottom type  "regedit" without the quotes and press enter.
    Click ok to continue on popup box. Window comes up with your system registry. Expand the "HKEY_CURRENT_USER" then expand the "Software" then down to the "Synaptics" and expand that one. Left Click on the "SynTPEnh" and to right will  open the sub entries.  The one your looking for is "DisableIntPDFeature".  Just write down the last two numbers in the (   ) at far right of this line incase this does not work so you can put it back to what it was.  Once you wrote it down, now you can change it- right click on the DisableIntPDFeature and a window pops up.  Left click on "Modify..."  then in new popup window on right side left click on decimal and in the window on left of this popup type in the numbers 51.  Left click OK once numbers entered and close it and and then close the whole application and reboot.  Done.  System should auto switch from usb mouse to Synaptics touchpad.
    If it does not work I am sorry- follow the above steps and type back in the number you wrote down before the change and save and reboot or reinstall the mousepad driver for your system from hp.

    Hi Trukntigger,
    Thank you for visiting the HP Support Forums and Welcome. Thank you for sharing your findings we appreciate you taking the time to post.
    Have a great week.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My new mac mini doesn't detect my wireless keyboard and mouse from logitech

    I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini.  Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one.  So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse.  Any ideas?  Also, I would like to add an apple remote to my mini.  I have one from my old iMac.  Is this possible?

    Try resetting the SMC.
    Question #2 - I have no idea.
    Barry

  • Touchpad click buttons does not working on Dell Latitude E5550

    Hello,
    I have a Dell Latitude E5550 with 5 physical click buttons. Only 3 of them works
    properly. Other 2, wich is left click/right click (on the top of touchpad), are not working.
    They are not detected by xev.
    The touchpad is detected as ALPS touchpad.
    I have installed xf86-input-synaptics.
    I have latest packages installed.
    What can I do?

    Hello,
    I have a Dell Latitude E5550 with 5 physical click buttons. Only 3 of them works
    properly. Other 2, wich is left click/right click (on the top of touchpad), are not working.
    They are not detected by xev.
    The touchpad is detected as ALPS touchpad.
    I have installed xf86-input-synaptics.
    I have latest packages installed.
    What can I do?

Maybe you are looking for

  • Time Characteristics: MTD  and Yesterday (How to adjust for different times

    Hi, I have this report which runs daily without any user input based on Current Calendar Day (SAP Exit)-1  [for column 1 on the report] and Current Calendar Month  [for column 2 on the report] If today I want to run this report for the Jan 20, 2006 h

  • Error authentication user in WCS about Human Tasks

    Hi All, We developed a BPM workflow and 4 human task(HT) in ADF and using WCS for accessing the tasks of the human workflow. We are working using the virtual machine soabpm-vm 11.1.1.6 ps5, downloaded by the Oracle Web Site. I created a space in WCS,

  • Panasonic TM700 recording in 1080/50p (PAL) - how do I get onto a MAC?

    Hi I have just purchased a Panasonic TM700 and recorded a few test shots in 1080/50p.... only to discover that neither I-movie or Final Cut Express can import the recordings. The Panasonic software provided is only PC friendly (and I'm not going ther

  • Display key figure as Hierarchy

    Dear All, I have a requirement where I would like to display the values of a key figure as range. I have Bonus as a key fgure. User would like to see the report as below, Rating   Bonus        HeadCount(No of Emp)      1        0-20%             1   

  • What is the best component to display either text or image?

    Hello all I'd like to realize some kind of application in which i can have a preview of what i select. It can be a text file or image. What kind of components can i use for that. Or is it better to use two different component and layout them in a car