Electric shock while charging IPod Nano 3rd Gen

Hello.
I bought a new IPod Nano 3rd Generation (4 gigabytes) and I noticed that, if I touch it while it's connected to my PC, it gives me an electrical shock. It's not a hard shock, but you can feel your finger shake and your arm weakens (it's kinda funny. xD)
To experience this, you mustn't have shoes, obviously.
I'd like to know if this is natural or if I should change it for a new one.
I believe it's something bad because the IPod runs out of battery quickly, but I play Solitaire a lot, so I don't know if it's my fault. :s
Thanks, in advance, for your answer.
Pedro Tomé

BTW this same problem came up back in August and then I suggested to the poster that a bad line cord might be the issue. Turns out that is exactly what it was...
http://discussions.apple.com/thread.jspa?messageID=5200739
Patrick

Similar Messages

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Driver for Ipod Nano 3rd Gen

    Hi
    Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

    I am having the same issue here.
    OS: Vista ultimate 64-bit
    iTunes: 7.6.0.29 (64-bit)
    iPod: Nano 8gb 3rd gen
    I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
    The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
    Can someone please shed some light on this for us? Thanks.
    [edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
    [edit2]And yes, I'm using the administrator account on the system, too.

  • Getting electric shock while charging my i touch

    hi
    i am getting electric shock while charging my itouch

    Also, do yo get it when charging with a wall charger?
    A computer USB port?
    Could be a problem with the cable (as mentioned by kylewont) or the charging source or the iPod.
    An appointment at the Genius Bar of an Apple store maybe in order.
    Apple Retail Store - Genius Bar

  • Can i use my iPod Nano 3rd gen data cable with iPhone 2G?

    I know you can't use the wall charger of iPod with the iPhone but can i use the usb cable? I broke my iPhone cable but i have an iPod nano 3rd gen data cable

    Thank you very much for the quick reply

  • How long will a 5 year old iPod Nano 3rd gen's battery last?

    Hello,
    I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
    Thanks,
    themiz

    i found this from another user and it worked for me!
    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Ipod nano 3rd gen (click wheel)

    I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
    Thanks.

    Clickwheel games are no longer available in the iTunes store.  Sorry.
    B-rock

  • Cannot find iPod nano 3rd gen in iTunes

    My iPod nano 3rd gen is recognized by Finder in mac OS but not shown in iTunes for sync

    Howdy Andrea.Betti,
    Thanks for using the Apple Support Communities.
    In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
    If you don't see your connected device in iTunes for Mac - Apple Support
    Have a good one,
    Alex H.

  • IPod Nano 3rd Gen Issues: would be grateful for any help

    Dear all,
    I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
    Here's what's happening.
    iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
    Connect, sync, no worries.
    Update iPod Nano software to 1.0.2.
    iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
    It is not recognised in iTunes like that.
    Any help?
    A hopeful Dan

    Hi,
    Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
    Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

  • Vertical line on my ipod nano 3rd gen?

    Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just never noticed it before.. but then this morning when i get up theres a line from top to bottom.. and i can't find support or topics about this (on an ipod nano 3rd gen) anywhere.. so far its playing the music but.. it doesn't seem right so i'm not sure if anyone else has had this? or what i should do? please help!

    http://www.apple.com/support/ipod/five_rs/nano3gen/#

Maybe you are looking for

  • Error when load data from CRM 3.0 to BI 7.0

    Hi I have connect CRM 3.0 system with BI 7.0 the CRM is MDMP and the BI is Unicode. When I run the BW extraction of the CRM Business Partner data I've a short dump that say GETWA_NOT_ASSIGNED -.You address a field symbol that pointed to the line of a

  • [SOLVED][GNOME] 3.14 update broken

    Hi all, Just upgraded my system to the latest 3.14 release and now everything is broken. GDM will not start and I cannot start a GNOME session directly via startx. Is anyone else having this issue? This is on an Intel Haswell based system, by the way

  • [solved] problems creating spatial index on SDO_ORDINATE_ARRAY in 11g

    We have a problem to create a spatial index on a field with geometries as SDO_ORDINATE_ARRAY points (3d) in 11g. The same method worked well in version 10. Test case: Create a new table: CREATE TABLE "TESTUSER"."MYTEST" "ID" VARCHAR2(15 BYTE), "GEOM"

  • Export Aperture library objects to Finder folders

    Inspired by the posted message by user http://discussions.apple.com/profile.jspa?userID=616539 I wrote a script that will do the following: 1. Sync Folders/SubFolders/Albums/Projects..etc hierarchy tree from Aperture to a Finder folders tree 2. At ru

  • Bug in db_truncate

    Affected versions: 4.4.20.NC, 4.5.20.NC, most likely older versions too Hi all, the documentation to Db::truncate says: Errors The Db::truncate method may fail and throw DbException, encapsulating one of the following non-zero errors, or return one o