Electrical Design Engineer with LabVIEW

Electrical Design Engineer with LabVIEW
q       Skilled with electronic circuit and electrical system design:
o         analog circuitry - detailed circuit analysis and design
o         microprocessors / microcontrollers
o         high performance data conversion circuits ( A/D and D/A converters )
o         digital circuitry - signal integrity, data communication, logic noise
o         power and support circuitry
o         signal conditioning and signal integrity (analog and digital)
o         RF and high-speed designs
o         full design implementation - concept to detailed circuit design to test / debug to production
q       Experience with RF and RF transceiver design.
q       Excellent documentation, specification, test planning, and test report writing skills a must. Must be able to develop and write detailed test requirements, test plans, technical specifications, design descriptions, and project reports.
q       LabVIEW™ and PC-based data acquisition experience. NI Certified Developer or ability to obtain this certification in reasonable period of time.
q       Data acquisition design experience.
q       Knowledge of PCB manufacturing.
Education / Training and Background :
BSEE / MSEE degree in Electrical Engineering
Attachments:
Invisar EE Design Engineer April 2006.pdf ‏50 KB
Invisar Project Engineer 5_2006.pdf ‏30 KB

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Similar Messages

Electrical Engineer with LabVIEW Experience, Windsor, CO - Start Immediately

National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
* Government
* Aerospace
* Nuclear, Fossil & Wind Power
* Environmental Remote Monitoring
* Defense
* Medical
* Oil & Gas
* Manufacturing
Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities.
Requirements:
1. BSEE
2. Proven electronic hardware design and development experience
3. 3 years minimum LabVIEW programming experience required.
4. Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
5. Embedded microcontroller programming
6. FPGA programming
7. Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
8. Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
9. Altium or similar electronics design package
10. Demonstrated proficiency with LabVIEW
11. Ability to solve complex technical problems independently
12. Good verbal and written communication skills
13. Ability to work in fast paced, high-pressure environment
Please include professional references and salary expectations.
Due to government contracting requirements, only US Citizens will be considered.
Learn more about us at http://www.nationalanalytics.com
No phone calls please.

Hi Dan,
I am the manager for the Customer Education department for NI Canada. We are looking for Engineers with extensive LabVIEW/LabWindows experienced to become certified as Professional Instructors of our courses. We are currently looking for someone experienced developing Real-Time applications, TestStand and CVI.
We do not offer a full-time position, rather are Contract work.
If you are interested and have the experience, feel free to contact me for further details.
Thanks,
Berenice Tostado
National Instruments Canada
Customer Education Manager

Electrical Engineer with LabVIEW Experience - Needed Immediately - Windsor, CO

National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
* Government
* Aerospace
* Nuclear, Fossil & Wind Power
* Environmental Remote Monitoring
* Defense
* Medical
* Oil & Gas
* Manufacturing
Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities.
Requirements:
BSEE
Proven electronic hardware design and development experience
Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
Embedded microcontroller programming
FPGA programming
Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
Altium or similar electronics design package
Demonstrated proficiency with LabVIEW
Ability to solve complex technical problems independently
Good verbal and written communication skills
Ability to work in fast paced, high-pressure environment
Please submit your resume via email to [email protected] . Please include professional references and salary expectations.
Due to government contracting requirements, only US Citizens will be considered.
Learn more about us at http://www.nationalanalytics.com
No phone calls please.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

We've are looking for a staff software engineer to join our company in Boston, MA (near downtown). We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years. Every year we release a new version of the software with significant new features. An engineer with our company needs to be more than just a LabVIEW hacker. We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification. We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
- coupling and cohesion in software design, how this relates to design paterns such as action engines
- software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
- Object Oriented design
- importance of documentation, importance and use of source code control
- pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
- tradeoffs of various file formats in terms of flexibility for future software changes
- FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
Formal job ad is below:
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
Programmer for Audio Test and Measurement software - Boston
Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
This position reports to the Software Manager. Duties include, but are not limited to:
Programming in LabVIEW
Designing and coding new Sound Measurement and Analysis software
Improving, reviewing and de-bugging existing code
Preparing internal and user technical documentation
Testing code
Interfacing with management, sales teams and customers to define tasks
Required skills / education
Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
Strong background (4+ years) in programming with 1+ years in LabVIEW.
A methodical approach to coding, testing and documentation
The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
Experience in acoustic engineering is a plus. Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
About Listen
Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

we're interviewing candidates, but, this position is still available

Full Time Software Engineer with Labview Experience Wanted - NJ

Pentek, Inc. located in Upper Saddle River, New Jersey is an established, high-tech manufacturer of Software Radio and Signal Processing products as well as High-Speed Recording Systems. We are seeking a multifaceted and resourceful Applications Engineer to join our Recording Systems Development Team. As part of this team, you will be responsible for software development, test and support of Pentek's high-speed PC-based recording systems.
Qualifications
Labview development experience
C programming experience a plus
JAVA programming experience a plus
Good verbal and written communication skills
This is a full-time position with 401k, excellent health insurance benefits, vacation/sick/personal days, competitive salary, and a great working environment!
If Pentek sounds like the place for you, please fax, mail or email your resume to:
Pentek, Inc.
Attn: Human Resources Manager
One Park Way 2nd Floor
Upper Saddle River, NJ 07458
Phone: (201) 818-5900
Fax: (201) 818-5692
Email: [email protected]
http://www.pentek.com/

We are looking for someone that can work within our facility, which is located in the U.S.

ATE Engineer with LabVIEW Position Open

Moog Aircraft Group Salt Lake Operations has several immediate openings for Test Engineers with the following experience:
6+ years ATE experience, including real-time technologies, as applied to complex component simulation and control solutions.
Working knowledge of National Instruments LabVIEW™.
BSEE or BSCS required.
Previous exp with avionic systems and the various interfaceBSEE, BSCS s between aircraft electronics and actuation hardware (i.e. electro-hydraulic and electro-mechanical actuation systems).
Possess a working knowledge of industrial and avionics bus architectures (e.g. ARINC-429, MIL-1553, RS-422/485, RS-232, USB, IEEE-1394, etc.). Work skillfully with various sensors and transducer signal conditioning (e.g. LVDTs, RVDTs, resolvers, pressure sensors, potentiometers, etc.).
If you are interested in this position, please send resume to [email protected]

Attachments:
CV_Giridhar Rajan.doc ‏50 KB

4D Technology is looking for a software/controls engineer with a strong background in LavView

Software/Controls Engineer
Do you want to work on cutting edge technology? Are you the type of person who keeps up with new software and hardware technology in your spare time? If so, 4D Technology, a worldwide leader in innovative optical metrology products, has a position for you on our engineering team.
4D is currently looking for a self-motivated Software/Controls Engineer to lead efforts in automation, image acquisition and data processing across several product lines. A successful candidate must demonstrate strong skills in software engineering and hardware interface. The ideal candidate will have experience with LabView, C or C#, image acquisition, hardware motion control and a strong commitment to producing quality products. This is a chance for you to be part of a diverse team delivering internationally recognized, innovative products, to learn new skills under the guidance of expert engineers, and to feel valued for your passion in delivering innovative, quality hardware and software.
The essential responsibilities of this key position are:
Rapid prototyping of hardware interfaces (motion control and image acquisition), data analysis algorithms, and GUI’s
Architect, code and release automation hardware and software for custom products and applications
Enhance and maintain existing LabVIEW and C applications
Produce production line testing tools.
Our team needs your enthusiasm and dedication to help us grow. We require a B.S. degree or higher in Engineering, Physics or Computer Science. The following skills and traits are highly desirable:
Experience with hardware interfacing, motion control, image acquisition
Solid knowledge of object oriented software design
Proficiency with LabVIEW
Experience with C#/.net and C++
Experience with embedded processors, PCB layout, electrical design
4+ years of practical work experience in engineering
Capable of working both independently and as part of a team
Excellent written and oral communication skills.
This is an exciting opportunity to be part of successful and motivated team. If you’re looking for a job that encourages creativity and innovation and you derive personal satisfaction from seeing your hard work result in commercial products that are used throughout the world, this is the place for you. Located in Tucson, Arizona, 4D Technology offers competitive a salary and a comprehensive benefits package.
Reward yourself with one of the best moves of your career. Send your résumé to:
Director, Human Resources
4D Technology Corporation
3280 E. Hemisphere Loop, Suite 146
Tucson, AZ 85706
FAX: 520-294-5601
or email résumé to: HR @ 4dtechnology.com.

Hi sir,
I am currently working in a MNC, as an engineer. I am keenly interested in Labview, and i know basics of it.
Attached is my resume. I would like to work with Labview.
Regards,
Pooja karnani
Attachments:
RESUME.docx ‏30 KB

Integrating custom PCIe hardware with LabView

Hi, I am new to LabView so appologize if question is in the wrong place.
I have a custom PCIe acquisition card that I want to use in LabView environment to postprocess some data. So far the board has been used successfully with its windows drivers and VS.NET software. What is the process for setting up a device like that in LabView? Can LabView use the COM object windows driver just like a Visual Studio project would? If yes, is there a document that explains how this is done?
I have worked with NI's own instruments where the driver is provided and seamlessly integrates into the LabView, but I am a bit lost with this custom non NI board.
Thank you.

Thanks. I tried searching that site for examples... but this is a board that our company has developed (software defined radio) and I am certain no one has written any drivers for it yet. Thats the problem statement that I am trying to research. What would it take to make the board we designed compatible with LabView. Since this is a Software defined radio platform, LabView offers some useful functions that can be used to postprocess and analyze data captured by our card.
Ideal goal is to have LabView module capture data from PCIe buffer allowing for further processing (filtering, FFT, demodulation, etc...). I would appreciate if you can direct me to some examples or literature on this topic.
Thanks,
Anton

Tpi Net compatible with LabVIEW 7.0 ?

Hi,
I designed drivers with LabVIEW 7.1 FDS for a remote instrument using the TpiNet library and the .NET Framework v1.1.
The operation was quite good.
After translating the same VI's to LabVIEW 7.0 PDS in order to provide executable applications to my customer, I couldn't run any of my programs.
After connection to the instrument, Labview 7.0 PDS sends the following error message :
"Error 1055 ... Invalid object reference"
the class which obviously fails under Labview 7.0 PDS is Connect in Tektronix.LogicAnalyser.TpiNet.ITlaSystem ;
Could anybody confirm this incompatibility between TpiNet and LabVIEW 7.0 ?
or propose any solution ?
thanks ;-)

I advise you to contact tektronix to know the compatibility with Labview 7.0.
Regards

Electrical/Software (LabVIEW) Design Engineer, Wiltshire, UK

Job Title: Electrical/Software (LabVIEW) Design Engineer
Job Type: Permanent
Location: Malmesbury, Wiltshire, UK
Job Purpose:
To provide design solutions for machine control, instrumentation and data acquisition using National Instruments LabVIEW. Support and maintain systems throughout Dyson Ltd.
Principal Accountabilities:
Design of software using National Instruments LabVIEW for control and data acquisition
Support existing National Instruments LabVIEW systems
Design, manufacture and installation of safety and machine control circuits
Design bespoke signal conditioning PCBs
Write specifications and manage sub-contract design and manufacture resource
Skills Knowledge & Experience:
Essential:
HND in Electrical/Electronic engineering with 5 years experience
Attendance at National Instruments LabVIEW Intermediate 1&2 with 5 years programming experience
Desirable:
Working knowledge of National Instruments hardware product range
PCB design (Mentor Graphics)
Experience of PLC programming
Formal training in CE directives on Machinery, Low Voltage and EMC.
Knowledge of BS7671 Electrical Installations (IEEE 17th Regs)
Behavioural:
The ability to communicate appropriate, concise and accurate information across the business (technical and non-technical) is essential for the successful applicant.
You will be a highly driven individual who strives for accuracy & quality in work delivered.
You will be able to solve problems in a logical way, pre-empt future problems and seizing opportunities without waiting to be told.
The proven ability to work as part of a team or un-supervised to an agreed goal or set of deliverables is imperative.
For more detail visit our website: www.careers.dyson.com
Contact: [email protected]

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Electrical Engineer with automated test experience looking for job in San Antonio Area

I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

Warner/superior electric's SS2000PCi motion controller interfacing with LabVIEW 6i

Sir,
In our application, we are controlling the movement of X-Y arm on the X-Y table. For this we are using superior electric products:
(a) Slo-Syn SS2000PCi Programmable Step Motor Controller
(b) MD808 Motor Drive
We are using two such controllers and motor drives to drive two 2 Amps Sanyo Denki Stepper motors: one each along X-axis and Y-axis. Along with the arm movement a data acquisition also has to be carried out. So, the motion control and Data Acquisition has to be synchronized by means of software. The problem now is to program the controller. Though MCPI Version 4.41 is there, we want to program the controller in LabVIEW 6i so that we can synch
ronize both motion control and Data Acquisition.There is no driver which is compatible to LabVIEW 6i.
Is there any 32-bit DLLs for this controller? If any one has these dll's please let me know. My E-mail ID: [email protected]
So that i can call these DLLs in LabVIEW 6i and program it.Or else send me at least the detailed low level command sets of the controller in pdf format so that i can develop our own drivers.
Regards,
Nagendra

Nagendra,
Unfortunately, I was unable to find any helpful resources for you based on a cursory web search. I recommend that you contact the manufacturer of the hardware and ask them if they have a driver (DLL) that you can use to interface with LabVIEW.
Good luck with your application, and have a good day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Research Design Engineer - LabVIEW/MATLAB Programmer -Boston, Massachusetts

Research Design Engineer - LabVIEW/MATLAB Programmer
The Eaton-Peabody Laboratory seeks an experienced programmer to design and write LabVIEW and MATLAB software to control stimulus generation, data acquisition and response analysis for a range of cutting-edge biomedical research projects. The successful candidate will join an existing team of hardware and software engineers within a multidisciplinary research laboratory, located at the Massachusetts Eye and Ear Infirmary, comprising 21 NIH-funded investigators studying a variety of aspects of hearing and deafness. To see current research projects here at the Eaton-Peabody Laboratory, go to our website: http://www.masseyeandear.org/research/ent/eaton-peabody/.
Minimum Qualifications:
BA/BS in Math, Computer Science or equivalent
demonstrated expertise in MATLAB, LabVIEW or C++
demonstrated ability to work and communicate effectively with technical and non-technical colleagues
Additional Qualifications:
experience with software control of digital and analog I/O boards
experience with scientific programming
Send a cover letter, resume, salary requirements and contact information for three references to:
[email protected]

Labview Programmer

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Software Design Engineer - UTC Power

Software design engineer for the design of software and control systems used in fuel cell stack and power plant test equipment.
Responsible for conceptual control logic, software design, software / hardware interfaces and controls hardware selection. Tasks include the planning, design, installation and documentation activities necessary to develop and maintain test equipment control software.
A thorough understanding of National Instrument's LabView software and its use in automatic or dynamic controls is required. This includes the use of LabView software to control electro-mechanical components, acquire, store and manage data using real time control systems. Experience with PLC programming is also desireable.
This position involves close interaction with numerous engineering disciplines and hourly functions. Ability to work in a team environment is a must. Applicant must be comfortable in a fast paced, dynamic work environment. Participation in FMEA's, HazOp's, EH&S reviews, failure investigations, and the training of hourly test operators will also be required.
Bachelors degree in Electrical or Computer Engineering
2 - 5 years experience in product development evaluation and testing.
Send resume to Mr. Joseph P. Haley
Manager, Software & Controls
UTC Power
195 Governor's Highway
South Windsor, CT 06074
[email protected]

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Electrical Design Engineer with LabVIEW

Similar Messages

Maybe you are looking for